Digest Authentication Setup for SIP Trunks
|
|
|
- Edwin Thomas
- 5 years ago
- Views:
Transcription
1 This chapter provides information about digest authentication setup for SIP trunks. When you configure digest authentication for SIP trunks, Cisco Unified Communications Manager challenges the identity of the SIP user agent when it receives a SIP request on the SIP trunk. The SIP user agent, in turn, can challenge the identity of Cisco Unified Communications Manager when Cisco Unified Communications Manager sends a SIP request to the trunk. For additional information on how digest authentication works for SIP trunks, see topics related to digest authentication. Set Up SIP Trunk Digest Authentication, page 1 Set Up Digest Authentication Enterprise Parameters, page 2 Set Up Digest Credentials, page 2 Application User Digest Credential Settings, page 3 Find SIP Realm, page 3 Configure SIP Realm, page 4 SIP Realm Settings, page 5 Delete SIP Realm, page 5 Where to Find More Information About SIP Trunk Digest Authentication, page 6 Set Up SIP Trunk Digest Authentication The following procedure describes the tasks to configure digest authentication for SIP trunks. Step 2 Configure the SIP trunk security profiles; make sure that you check the Enable Digest Authentication check box. Apply a SIP trunk security profile to the trunk. Configure the enterprise parameter, Cluster ID, if not configured. This parameter supports Cisco Unified Communications Manager challenges to the identity of the SIP user agent that is sending a SIP request on the SIP trunk. 1
2 Set Up Digest Authentication Enterprise Parameters Step 4 Step 5 If Cisco Unified Communications Manager challenges the identity of SIP user agents that are sending SIP requests on the SIP trunk, configure the digest credentials for the application user in the Application User Configuration window. If Cisco Unified Communications Manager responds to challenges from a trunk peer, configure the SIP realm. Application User Digest Credential Settings, on page 3 Apply SIP Trunk Security Profile Configure SIP Realm, on page 4 Digest Authentication Set Up Digest Authentication Enterprise Parameters, on page 2 Set Up Digest Credentials, on page 2 SIP Realm Settings, on page 5 Set Up Digest Authentication Enterprise Parameters To configure the enterprise parameter, Cluster ID, for digest authentication, choose System > Enterprise Parameters in Cisco Unified Communications Manager Administration. Locate the Cluster ID parameter and update the value, as described in the Help for the parameter. This parameter supports Cisco Unified Communications Manager challenges to the identity of the SIP user agent that is sending a SIP request on the SIP trunk. Tip To access the Help for the parameter, click the question mark that displays in the Enterprise Parameters Configuration window or click the parameter link. Set Up Digest Credentials If Cisco Unified Communications Manager challenges the identity of a SIP user agent, you must configure the digest credentials for the application user in the Application User Configuration window in Cisco Unified Communications Manager Administration. Cisco Unified Communications Manager uses these credentials to verify the identity of SIP user agents that are sending requests through the SIP trunk. To configure the digest credentials for an application user, perform the following procedure: 2
3 Application User Digest Credential Settings Step 2 Step 4 Find the application user, as described in the Administration Guide for Cisco Unified Communications Manager. Click the application user link. After the specific Application User Configuration window displays, enter the appropriate settings, as described in Table 2: SIP Realm Security Profile, on page 5. Click Save. SIP Realm Settings, on page 5 Application User Digest Credential Settings The following table describes the settings for the digest credential settings in the Application User Configuration window in Cisco Unified Communications Manager Administration. Table 1: Digest Authentication Credentials Setting Digest Credentials Confirm Digest Credentials Description Enter a string of alphanumeric characters. To confirm that you entered the digest credentials correctly, enter the credentials in this field. Find SIP Realm To find a SIP Realm, perform the following procedure: In Cisco Unified Communications Manager Administration, choose User Management > SIP Realm. The Find and List window displays. Records from an active (prior) query may also display in the window. Step 2 To find all records in the database, ensure the dialog box is empty; go to, on page 4. To filter or search records 3
4 Configure SIP Realm Step 4 a) From the first drop-down list box, choose a search parameter. b) From the second drop-down list box, choose a search pattern. c) Specify the appropriate search text, if applicable. Note To add additional search criteria, click the + button. When you add criteria, the system searches for a record that matches all criteria that you specify. To remove criteria, click the button to remove the last added criterion or click the Clear Filter button to remove all added search criteria. Click Find. All matching records display. You can change the number of items that display on each page by choosing a different value from the Rows per Page drop-down list box. From the list of records that display, click the link for the record that you want to view. Note To reverse the sort order, click the up or down arrow, if available, in the list header. The window displays the item that you choose. What to Do Next If you have not already done so, configure the Cluster ID enterprise parameter. Set Up Digest Authentication Enterprise Parameters, on page 2 Configure SIP Realm If Cisco Unified Communications Manager responds to challenges from one or more trunk peers, you must configure SIP Realm for each SIP trunk user agent that can challenge Cisco Unified Communications Manager. To add or update a SIP Realm, perform the following procedure: In Cisco Unified Communications Manager Administration, choose User Management > SIP Realm. Step 2 Enter the appropriate settings as described in Table 2: SIP Realm Security Profile, on page 5. Click Save. Step 4 Perform the procedure for all realms that you must add or update. What to Do Next To ensure that digest authentication is successful, verify that the same settings that you configured in Cisco Unified Communications Manager are configured on the SIP user agent. Find SIP Realm, on page 3 4
5 SIP Realm Settings SIP Realm Settings The SIP Realm provides the trunk-side credentials when Cisco Unified Communications Manager gets challenged by a trunk peer. The following table describes the settings for the SIP Realm. Table 2: SIP Realm Security Profile Setting Realm User Digest Credentials Confirm Digest Credentials Description Enter the domain name for the realm that connects to the SIP trunk; for example, SIPProxy1_xyz.com. You can use alphanumeric characters, period, dash, underscore, and space. Enter the user name for the SIP user agent in this realm; for example, enter the Cisco Unified Communications Manager server name. The SIP trunk uses this user name to challenge this Cisco Unified Communications Manager. Enter the password that Cisco Unified Communications Manager uses to respond to a challenge for this realm and user. Re-enter the password for verification. Delete SIP Realm This section describes how to delete a SIP Realm from the Cisco Unified Communications Manager database. Step 2 Find the SIP Realm to delete. Perform one of the following tasks: a) To delete multiple SIP Realms, perform one of these tasks in the Find and List window: Check the check boxes next to the realms that you want to delete; then, click Delete Selected. You can delete all configurable records for this selection by clicking Select All and then clicking Delete Selected. b) To delete a single SIP Realm, perform one of these tasks in the Find and List window: Check the check box next to the realm that you want to delete; then, click Delete Selected. 5
6 Where to Find More Information About SIP Trunk Digest Authentication Click the Name link for the realm. After the specific SIP Realm Configuration window displays, click Delete Selected. When prompted to confirm the delete operation, click OK to delete or Cancel to cancel the delete operation. Find SIP Realm, on page 3 Where to Find More Information About SIP Trunk Digest Authentication Digest Authentication Set Up SIP Trunk Digest Authentication, on page 1 Set Up Digest Authentication Enterprise Parameters, on page 2 6
Phone NTP Reference Configuration
CHAPTER 5 If you want to do so, you can configure phone Network Time Protocol (NTP) references in Cisco Unified Communications Manager Administration to ensure that a SIP Phone gets its date and time from
User Group Configuration
CHAPTER 90 The role and user group menu options in the Cisco Unified Communications Manager Administration User Management menu allow users with full access to configure different levels of access for
BLF Presence. Configure BLF Presence
This chapter provides information about the Busy Lamp Field (BLF) Presence feature which allows a user to monitor the real-time status of another user at a directory number or SIP URI. Configure, page
The Group Call Pickup feature and Directed Call Pickup feature do not work with hunt lists.
Hunt list setup The following chapter provides information to add or remove hunt lists or to add, remove, or change the order of line groups in a hunt list, or synchronize configuration changes with affected
Application User Configuration
CHAPTER 87 The following topics contain information on managing application user information: Settings, page 87-1 Adding an Administrator User to Cisco Unity or Cisco Unity Connection, page 87-6 Changing
Application User Setup
This chapter provides information on managing application user information. About, page 1 Add Application User, page 2 Application User Deletion, page 3 Application User Settings, page 3 Add Administrator
Using the Certificate Authority Proxy Function
CHAPTER 10 This chapter provides information on the following topics: Certificate Authority Proxy Function Overview, page 10-1 Cisco Unified IP Phone and CAPF Interaction, page 10-2 CAPF Interaction with
This chapter provides information about managing end user directory information.
End user setup This chapter provides information about managing end user directory information. About end user setup, page 1 End user deletion, page 2 End user settings, page 3 Create Cisco Unity Connection
Certificate authority proxy function
Certificate authority proxy function This chapter provides information about the certificate authority proxy function. About certificate authority proxy function, page 1 Cisco Unified IP Phone and CAPF
Phone NTP Reference Configuration
CHAPTER 8 If you want to do so, you can configure phone Network Time Protocol (NTP) references in Cisco Unified CallManager Administration to ensure that a Cisco SIP IP Phone gets its date and time from
User Templates. Find BAT User Template. Procedure
This chapter provides information about using Cisco Unified Communications Manager Bulk Administration (BAT) user templates to define the common user attributes to add a group of new users. Find BAT User
Softkey Template Setup
This chapter provides details about softkey template configuration. The administrator can copy, update, or delete nonstandard softkey templates by using softkey template configuration. About, on page 1
End User Setup. About End User Setup
This chapter provides information about managing end user directory information. About, on page 1 End User Deletion, on page 3 End User Settings, on page 4 Create Cisco Unity Connection Voice Mailbox,
Cisco Unified CM User Options
Cisco Unified CM User Options This document describes how to use Cisco Unified CM User Options web pages. Cisco Unified CM User Options provides a web-based interface that allows users and administrators
Configuring Authentication and Encryption for CTI, JTAPI, and TAPI
CHAPTER 22 Configuring Authentication and Encryption for CTI, JTAPI, and TAPI This chapter provides a brief overview of how to secure the CTI, JTAPI, and TAPI applications. It also describes the tasks
Configure Third-Party SIP Phones
Third-Party SIP Endpoints Overview, page 1 Third-Party SIP Endpoints Configuration Task Flow, page 2 Third-Party SIP Endpoints Overview In addition to the Cisco Unified IP Phones that run SIP, Cisco Unified
Creating a Crosstab Query in Design View
Procedures LESSON 31: CREATING CROSSTAB QUERIES Using the Crosstab Query Wizard box, click Crosstab Query Wizard. 5. In the next Crosstab Query the table or query on which you want to base the query. 7.
Spectrum Enterprise SIP Trunking Service Cisco Unified Communication Mgr Firmware 6.01 IP PBX Configuration Guide
Spectrum Enterprise SIP Trunking Service Cisco Unified Communication Mgr Firmware 6.01 IP PBX Configuration Guide About Spectrum Enterprise: Spectrum Enterprise is a division of Charter Communications
Common Phone Profile Configuration
CHAPTER 78 Use the following topics to configure and locate common phone profiles: Settings, page 78-1 Synchronizing Common Phone Profiles With Affected Devices, page 78-5 Related Topics, page 78-6 Settings
Cisco Unified Communications Manager configuration for integration with IM and Presence Service
Cisco Unified Communications Manager configuration for integration with IM and Presence Service User and Device Configuration on Cisco Unified Communications Manager before Integration Task List, page
Updating Users. Updating Users CHAPTER
CHAPTER 18 Update the existing user information that is in the database by using the following procedure:, page 18-1 Retaining Stored Values, page 18-2 Using the BAT Spreadsheet to Create a CSV Data File
CTI route point setup
This chapter provides information to configure CTI route points and CTI ports. For additional information, see topics related to computer telephony integration and trusted relay points in the Cisco Unified
Intercom. Configuration Checklist for Intercom CHAPTER
CHAPTER 28, a type of phone line, combines the functionality of a traditional line and a speed dial. With an intercom line, a user can call the intercom line of another user, which auto-answers to one-way
Intercluster Peer Configuration
Prerequisites for Intercluster Deployment, page 1, page 2 Prerequisites for Intercluster Deployment You configure an intercluster peer between the IM and Presence database publisher nodes in standalone
Adding Users. Adding Users CHAPTER
CHAPTER 15 You can use Cisco Unified Communications Manager Bulk Administration (BAT) to add a group of new users and to associate users to phones and other IP Telephony devices in the Cisco Unified Communications
Survivable Remote Site Telephony Configuration
13 CHAPTER Survivable Remote Site Telephony Configuration A survivable remote site telephony (SRST) reference comprises the gateway that can provide limited Cisco Unified CallManager functionality when
Configure Global Dial Plan Replication
Global Dial Plan Replication Overview, page 1 Global Dial Plan Replication Prerequisites, page 3 Global Dial Plan Replication Task Flow, page 3 Global Dial Plan Replication Overview Use global dial plan
Intercluster directory URI
This chapter describes how to enable the ILS URI Replication feature in order to support intercluster dialing with directory URIs. When this feature is configured, Cisco Unified Communications Manager
Configuring SIP Registration Proxy on Cisco UBE
The Support for SIP Registration Proxy on Cisco UBE feature provides support for sending outbound registrations from Cisco Unified Border Element (UBE) based on incoming registrations. This feature enables
Real-Time Monitoring Configuration
CHAPTER 7 This chapter contains the following information for configuring the Cisco Unified Presence Server Real-Time Monitoring Tool (RTMT). Some options that are available in the current version of the
SIP Normalization Script Configuration
CHAPTER 81 The following topics cover Cisco Unified Communications Manager SIP normalization script configuration: Settings, page 81-1 Importing SIP Normalization Scripts, page 81-5 Related Topics, page
Configuration of trace and Log Central in RTMT
About Trace Collection, page 1 Preparation for trace collection, page 2 Types of trace support, page 4 Configuration of trace collection, page 5 Collect audit logs, page 19 View Collected Trace Files with
Hotline. Configuration Checklist for Hotline CHAPTER
CHAPTER 26 The hotline feature extends the Private Line Automatic Ringdown (PLAR) feature, which allows you to configure a phone so that when the user goes off hook (or the NewCall softkey or line key
Cisco Unified Customer Voice Portal
This chapter explains the procedures you must perform to configure the Cisco Unified CVP Call and OAMP servers on Side A and Side B. Validate Network Card, page 2 Configure Unified CVP Call Server, page
Cisco voic port setup
Cisco voice-mail port setup This chapter provides information to add and delete Cisco voice-mail ports in the Cisco Unified Communications Manager database without using the Cisco Voice Mail Port Wizard.
Encrypted Phone Configuration File Setup
This chapter provides information about encrypted phone configuration files setup. After you configure security-related settings, the phone configuration file contains sensitive information, such as digest
Malicious Call Identification
CHAPTER 33 This chapter provides the following information about the feature: Configuration Checklist for Malicious Call ID, page 33-1 Introducing, page 33-2 System Requirements for Malicious Call ID,
Text editors for phone CSV data file creation. You cannot modify or delete the Simple Phone or Default Phone file formats.
Phone file formats This chapter provides information about configuring file formats for CSV data files that are created using a text editor. Text editors for phone CSV data file creation, page 1 Find phone
Wireless LAN Profile Setup
Wireless LAN Profiles, page 1 Network Access Profile Settings, page 2 Wireless LAN Profile Settings, page 3 Wireless LAN Profile Group Settings, page 6 Create Network Access Profile, page 6 Create Wireless
Getting Started With the Cisco PAM Desktop Software
CHAPTER 3 Getting Started With the Cisco PAM Desktop Software This chapter describes how to install the Cisco PAM desktop client software, log on to Cisco PAM, and begin configuring access control features
Cisco Mobile Skill Manager
The Unified CCX supervisor can use the on a smart phone to remotely manage the skill data of all associated agents. This application is not a native one and can run on smart phone browsers. The devices
Cisco Voic Port Configuration
CHAPTER 58 You can add and delete ports that are associated with a Cisco voice-mail server to the Cisco Unified Communications Manager database without using the Cisco Voice Mail Port Wizard. Use the following
About Cisco Unified Communications Manager Group Setup
Cisco Unified Communications Manager Group Setup This chapter provides information to configure a Cisco Unified Communications Manager group. About, on page 1 Cisco Unified Communications Manager Group
Migrate Data from Cisco Secure ACS to Cisco ISE
Migrate Data from Cisco Secure ACS to Cisco ISE This chapter describes exporting and importing Cisco Secure ACS, Release 5.5 or later data into Cisco ISE, Release 2.3 system using the migration tool. Export
Tip: You can modify variable settings after you add the web application. See Managing repository variable list values, page 4.
Repository Variables How To You can use repository variables to store values that can be used in all scripts recorded or run against an application version. This helps reduce the need for extensive script
Configure Intercluster Lookup Service
Intercluster Lookup Service Overview, page 1 ILS Prerequisites, page 2 ILS Configuration Task Flow, page 2 ILS Interactions and Restrictions, page 9 Intercluster Lookup Service Overview The Intercluster
Configuring Service Monitor
CHAPTER 3 The following topics are included: Configuring Trap Receivers, page 3-2 Understanding and Setting Data Source Credentials, page 3-2 Managing the Phone Count, page 3-15 Configuring Settings for
Configuring a Secure Survivable Remote Site Telephony (SRST) Reference
CHAPTER 12 Configuring a Secure Survivable Remote Site Telephony (SRST) Reference This chapter contains information on the following topics: Overview for Securing the SRST, page 12-1 Secure SRST Configuration
Route Group Setup. About Route Group Setup. Route Group Deletion
This chapter provides information to add or delete a route group or to add devices to or to remove devices from a route group. For additional information about route plans, see the Cisco Unified Communications
IM and Presence Service Network Setup
Configuration changes and service restart notifications, page 1 DNS Domain Configuration, page 2 IM and Presence Service Default Domain Configuration, page 6 IM Address Configuration, page 7 Domain Management
Data Sources. Data Sources Page
A data source represents a database. Each reporting server requires one data source for each database from which reports are populated. Drawer : Click the drawer in the left panel to open the page. (Only
Do Not Disturb. Configuration Checklist for Do Not Disturb CHAPTER
CHAPTER 21 The (DND) feature provides the following options: Call Reject This option specifies that no incoming call information gets presented to the user. Depending on how you configure the DND Incoming
This chapter provides information about the Do Not Disturb (DND) feature which provides the following options:
This chapter provides information about the (DND) feature which provides the following options: Call Reject - This option specifies that no incoming call information gets presented to the user. Depending
Enterprise Architect. User Guide Series. Testing. Author: Sparx Systems. Date: 10/05/2018. Version: 1.0 CREATED WITH
Enterprise Architect User Guide Series Testing Author: Sparx Systems Date: 10/05/2018 Version: 1.0 CREATED WITH Table of Contents Testing 3 Test Management 4 Create Test Records 6 Working On Test Records
Provision Unified CM for Unified CCX
When you access Unified CCX Administration for the first time in a cluster, the system automatically initiates the cluster setup procedure once for each cluster to perform the following tasks: Identify
Data Sources. Data Sources page
Data Sources A data source represents a database. Each reporting server requires one data source for each database from which reports are populated. Unified Intelligence Center supports MS SQL Server and
Configuring Multi-Tenants on SIP Trunks
The feature allows specific global configurations for multiple tenants on SIP trunks that allow differentiated services for tenants. allows each tenant to have their own individual configurations. The
Wesleyan University Student/Faculty Information System. Using Between Criteria with Prompts in Query
Using Between Criteria with Prompts in Query You may use Between criteria with a prompt for selecting variety of ranges. This is especially helpful with a date range as shown in this example. The record/table
Microsoft Access 2010
Microsoft Access 2010 Chapter 2 Querying a Database Objectives Create queries using Design view Include fields in the design grid Use text and numeric data in criteria Save a query and use the saved query
Introduction to Microsoft Access 2016
Introduction to Microsoft Access 2016 A database is a collection of information that is related. Access allows you to manage your information in one database file. Within Access there are four major objects:
Organizing Your Contacts
You can organize your Contact list using either the Cisco IP Phone Messenger service application on your Cisco Unified IP Phone or the User Options web pages on the web. However, some tasks are not available
Microsoft Access 2013
Microsoft Access 2013 Chapter 2 Querying a Database Objectives Create queries using Design view Include fields in the design grid Use text and numeric data in criteria Save a query and use the saved query
Microsoft Access 2013
Microsoft Access 2013 Chapter 2 Querying a Database Objectives Create queries using Design view Include fields in the design grid Use text and numeric data in criteria Save a query and use the saved query
Meet-Me Conferencing
Overview, on page 1 Task Flow, on page 1 Restrictions, on page 7 Overview Users can use to set up or join conferences. A user that sets up a conference is called the conference controller. A user that
Meet-Me Conferencing
Overview, page 1 Task Flow, page 1 Restrictions, page 7 Overview Users can use to set up or join conferences. A user that sets up a conference is called the conference controller. A user that joins a conference
Lab - Share Resources in Windows
Introduction In this lab, you will create and share a folder, set permissions for the shares, create a Homegroup and a Workgroup to share resources, and map a network drive. Due to Windows Vista lack of
Common Device Configuration
CHAPTER 77 Use the following topics to configure common device configurations: Settings, page 77-1 Synchronizing a With Affected Devices, page 77-7 Related Topics, page 77-8 Settings In Cisco Unified Communications
Credential Policy CHAPTER
CHAPTER 21 Cisco Unified Communications Manager authenticates user login credentials before allowing system access. To help secure user accounts, you can specify settings for failed logon attempts, lockout
Partition Setup. About Partition Setup
This chapter provides information to find, add, update, or delete route partitions. For additional information, see topics related to local route groups in the Cisco Unified Communications Manager Features
Second SIP Fallback with Gateway Registration
Second SIP Fallback with Gateway Registration For all Mediatrix units Revision 03-2015-10-28 www.media5corp.com Second SIP Fallback with Gateway Registration Table of Contents Second SIP Gateway Fallback...3
Call Forwarding. Call Forwarding Overview
Overview, page 1 Configuration Task Flow, page 3 Interactions and Restrictions, page 22 Overview As a user, you can configure a Cisco Unified IP Phone to forward calls to another phone. The following call
Encrypted Phone Configuration File Setup
This chapter provides information about encrypted phone configuration files setup. After you configure security-related settings, the phone configuration file contains sensitive information, such as digest
Configuring a Secure Survivable Remote Site Telephony (SRST) Reference
CHAPTER 13 Configuring a Secure Survivable Remote Site Telephony (SRST) Reference This chapter contains information on the following topics: Overview for Securing the SRST, page 13-1 Configuration Tips
Manage Finesse IP Phone Agent
Finesse IP Phone Agent, page 1 One Button Sign In, page 2 Finesse IP Phone Service Subscription Options, page 3 Set Up Application User, Web Access, and HTTPS Server Parameters, page 4 Configure Finesse
Configure SIP Registrations to Authenticate and Authorize on a Per-user Basis (MRA) for CUCM 11.5
Configure SIP Registrations to Authenticate and on a Per-user Basis (MRA) for CUCM 11.5 Contents Introduction Prerequisites Requirements Components Used Background Information Configure Network Diagram
Call Park and Directed Call Park
Call Park Overview Call Park Overview, on page 1 Call Park Prerequisites, on page 2 Call Park Configuration Task Flow, on page 2 Call Park Interactions and Restrictions, on page 17 Troubleshooting Call
Cisco Extension Mobility
CHAPTER 9 allows users to temporarily access their Cisco Unified IP Phone configuration such as line appearances, services, and speed dials from other Cisco Unified IP Phones. Extension mobility functionality
Phone Security. Phone Security. This chapter provides information about phone security.
This chapter provides information about phone security., page 1 Trusted Devices, page 2 Phone Model Support, page 3 Preferred Vendor SIP Set Up, page 4 View Settings, page 5 Set Up, page 5 Interactions
Post-Installation Tasks
CHAPTER 5 Post-Installation Checklist, page 5-1, page 5-6 Post-Installation Checklist Figure 5-1 Post-Installation Flowchart Post-installaion checklist Non-DNS deployment? Yes No Check for software and
Second SIP Gateway Fallback with Endpoint Registration
Second SIP Gateway Fallback with Endpoint Registration For Mediatrix C7,Mediatrix 4100, Mediatrix Sentinel, and Mediatrix LP series Revision 3-2015-12-17 www.media5corp.com Second SIP Gateway Fallback
Using the Prime Performance Manager Web Interface
3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager
Enterprise Architect. User Guide Series. Testing. Author: Sparx Systems. Date: 26/07/2018. Version: 1.0 CREATED WITH
Enterprise Architect User Guide Series Testing Author: Sparx Systems Date: 26/07/2018 Version: 1.0 CREATED WITH Table of Contents Testing 3 Test Management 4 Create Test Records 6 Show Test Script Compartments
Configuring Role-Based Access Control
Configuring Role-Based Access Control This chapter includes the following sections: Role-Based Access Control, page 1 User Accounts for Cisco UCS Manager, page 1 User Roles, page 3 Privileges, page 4 User
Manage End Users. End User Overview. End User Management Tasks. End User Overview, on page 1 End User Management Tasks, on page 1
End User Overview, on page 1 End User Management Tasks, on page 1 End User Overview When administering an up and running system, you may need to make updates to the list of configured end users in your
Configuring Triggers. Viewing and Deleting Triggers
Configuring Triggers Viewing and Deleting Triggers Adding a Trigger Viewing, Adding, Moving, and Deleting Rules for a Trigger Adding, Editing, and Deleting Conditions for a Trigger Rule Viewing and Deleting
For Trace and Log Central to work, you must resolve DNS lookup for all nodes in the cluster on the client machine.
Trace and Log Central, page 1 Log Viewers, page 42 Plugins, page 45 Trace and Log Central For Trace and Log Central to work, you must resolve DNS lookup for all nodes in the cluster on the client machine.
Partition Configuration
CHAPTER 40 Use the following topics to find, add, update, or delete route partitions: Settings, page 40-1 Searching for a Partition, page 40-4 Synchronizing a Partition With Affected Devices, page 40-4
IM and Presence Service Configuration for SIP Federation
IM and Presence Service Configuration for SIP Federation IM and Presence Service Release 9.0 or later supports interdomain federation with Microsoft Lync. For IM and Presence Service Release 9.0 or later,
Device Management Basics
The following topics describe how to manage devices in the Firepower System: The Device Management Page, on page 1 Remote Management Configuration, on page 2 Adding Devices to the Firepower Management
User Preferences Settings
CHAPTER 40 Impacted GUI: Cisco Unified Communications Manager Business Edition 3000 User Preferences Interface The following information displays when the user clicks Help in the Cisco Unified Communications
Enterprise Architect. User Guide Series. Testing. Author: Sparx Systems Date: 15/07/2016 Version: 1.0 CREATED WITH
Enterprise Architect User Guide Series Testing Author: Sparx Systems Date: 15/07/2016 Version: 1.0 CREATED WITH Table of Contents Testing 3 Test Management 4 Create Test Records 6 Working On Test Records
BANNER 9 QUICK NAVIGATION GUIDE
Application Navigator Application Navigator provides a single interface to navigate the Banner 9 JAVA pages. It is a tool that allows you to go back and forth between the current Banner forms and the new
Hold Reversion. Configuration Checklist for Hold Reversion CHAPTER
CHAPTER 25 The hold reversion feature alerts a phone user when a held call exceeds a configured time limit. This chapter provides information on the following topics: Configuration Checklist for, page
From the drop-down list, select Administrator or Supervisor.
Sign In, page 1 Menus, page 3 Common s and Tasks, page 6 Configuration in Packaged CCE, page 9 Sign In To sign in to Unified CCE Web Administration, point to https:///cceadmin, where
A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
Volume: 383 Questions Question No: 1 Which parameter should be set to prevent H.323 endpoints from registering to Cisco TelePresence Video Communication Server automatically? A. On the VCS, navigate to
Configure Cisco Unified Communications Manager
Configure Cisco Unified Communications Manager Overview, on page 1 Set Up Phone Route Plans, on page 2 Set Up Cisco Unified Communications Manager for Emergency Responder, on page 3 Create Emergency Responder
Backup the System. Backup Overview. Backup Prerequisites
Backup Overview Backup Overview, on page 1 Backup Prerequisites, on page 1 Backup Task Flow, on page 2 Backup Interactions and Restrictions, on page 7 Cisco recommends performing regular backups. You can
Enterprise Architect. User Guide Series. Testing
Enterprise Architect User Guide Series Testing How to manage testing? Use Sparx Systems Enterprise Architect as a complete Test Management bed to create and manage tests and test scripts for model elements,
Location Configuration
CHAPTER 15 The following topics explain locations in more detail: Settings, page 15-1 Resynchronizing a Location Bandwidth, page 15-5 Related Topics, page 15-5 Settings In Cisco Unified Communications
Configure Autoregistration
Autoregistration Overview, page 1 Task Flow, page 1 Autoregistration Overview Autoregistration allows Cisco Unified Communications Manager to automatically assign directory numbers to new phones when you