Hyper-V - Windows 2012 and 8. Virtual LoadMaster for Microsoft Hyper-V on Windows Server 2012, 2012 R2 and Windows 8. Installation Guide
|
|
- Blaise West
- 6 years ago
- Views:
Transcription
1 Virtual LoadMaster for Microsoft Hyper-V on Windows Server 2012, 2012 R2 and Windows 8 Installation Guide VERSION: 5.0 UPDATED: JANUARY 2016
2 Copyright Notices Copyright KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered trademarks of KEMP Technologies, Inc.. KEMP Technologies, Inc. reserves all ownership rights for the LoadMaster product line including software and documentation. The use of the LoadMaster Exchange appliance is subject to the license agreement. Information in this guide may be modified at any time without prior notice. Microsoft Windows is a registered trademarks of Microsoft Corporation in the United States and other countries. All other trademarks and service marks are the property of their respective owners. Limitations: This document and all of its contents are provided as-is. KEMP Technologies has made efforts to ensure that the information presented herein are correct, but makes no warranty, express or implied, about the accuracy of this information. If any material errors or inaccuracies should occur in this document, KEMP Technologies will, if feasible, furnish appropriate correctional notices which Users will accept as the sole and exclusive remedy at law or in equity. Users of the information in this document acknowledge that KEMP Technologies cannot be held liable for any loss, injury or damage of any kind, present or prospective, including without limitation any direct, special, incidental or consequential damages (including without limitation lost profits and loss of damage to goodwill) whether suffered by recipient or third party or from any action or inaction whether or not negligent, in the compiling or in delivering or communicating or publishing this document. Any Internet Protocol (IP) addresses, phone numbers or other data that may resemble actual contact information used in this document are not intended to be actual addresses, phone numbers or contact information. Any examples, command display output, network topology diagrams, and other figures included in this document are shown for illustrative purposes only. Any use of actual addressing or contact information in illustrative content is unintentional and coincidental. Portions of this software are; copyright (c) Frank Denis. All rights reserved; copyright (c) 2002 Michael Shalayeff. All rights reserved; copyright (c) 2003 Ryan McBride. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE ABOVE COPYRIGHT HOLDERS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the above copyright holders.. Portions of the LoadMaster software are copyright (C) 1989, 1991 Free Software Foundation, Inc. -51 Franklin Street, Fifth Floor, Boston, MA , USA- and KEMP Technologies Inc. is in full compliance of the GNU license requirements, Version 2, June Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Copyright KEMP Technologies, Inc. All Rights Reserved. 2
3 Portions of this software are Copyright (C) 1988, Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Portions of this software are Copyright (C) 1998, Massachusetts Institute of Technology Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Portions of this software are Copyright (C) , Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. Portions of this software are Copyright (C) 2003, Internet Systems Consortium Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Used, under license, U.S. Patent Nos. 6,473,802, 6,374,300, 8,392,563, 8,103,770, 7,831,712, 7,606,912, 7,346,695, 7,287,084 and 6,970,933 Copyright KEMP Technologies, Inc. All Rights Reserved. 3
4 Table of Contents 1 Introduction Download the Hyper-V Files Importing the VLM Check the Network Adapter Settings Power On the LoadMaster Licensing and Configuration Troubleshooting Cannot access the Web User Interface NIC Types Cannot Be Mixed Static MAC Addresses Must Be Configured Make this VM Highly Available Option is Greyed Out Factory Reset References Document History Copyright KEMP Technologies, Inc. All Rights Reserved. 4
5 Introduction 1 Introduction The KEMP Virtual LoadMaster is a version of the KEMP LoadMaster that runs as a virtual machine within a hypervisor and can provide all the features and functions of a hardware-based LoadMaster. This document describes the installation of the Virtual LoadMaster (VLM) within a Microsoft Hyper-V environment.the VLM has been tested with Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 and Windows 8. The instructions in this installation guide are for Windows Server 2012, Windows Server 2012 R2 and Windows 8. For instructions on Windows Server 2008 R2, refer to the Microsoft Hyper-V Windows 2008 R2, Installation Guide. There are several different versions of the VLM available. Full details of the currently supported versions are available on our website: The Microsoft Hyper-V virtual machine guest environment for the VLM, at minimum, must include: 2 x virtual processors 2 GB RAM 32 GB virtual hard disk capacity There may be maximum configuration limits imposed by Hyper-V such as maximum RAM per VM, Virtual NICs per VM etc. For further details regarding the configuration limits imposed by Microsoft Hyper-V, please refer to the relevant Microsoft Hyper-V documentation. Copyright KEMP Technologies, Inc. All Rights Reserved. 5
6 2 Installing Virtual LoadMaster (VLM) using Hyper-V Manager The following instructions describe how to install a Virtual LoadMaster on a Hyper-V environment using the Hyper-V Manager. 2.1 Download the Hyper-V Files The VLM is packaged within a.vhd file for ease of deployment. This file can be freely downloaded from KEMP Technologies for a 30 day evaluation period. To download the VLM please follow the instructions below: 1. Log on to 2. Within the Select the hypervisor platform section, select the option for Microsoft Hyper-V. 3. Click on the Download Hyper-V VM button. 4. Read the end user agreement. 5. To continue, select your country from the drop-down list. 6. Click on the Agree button. 7. Download the Hyper-V zip file. 8. Unzip the contents of the file to an accessible location within the hyper-v environment. 2.2 Importing the VLM To import the VLM we use the Import Virtual Machine function within the Hyper-V Manager. 1. Open the Hyper-V Manager and select the relevant server node in the left panel. Copyright KEMP Technologies, Inc. All Rights Reserved. 6
7 Figure 2-1: Hyper-V Manager 2. Click the Import Virtual Machine menu option in the panel on the right. Figure 2-2: Import Virtual Machine Copyright KEMP Technologies, Inc. All Rights Reserved. 7
8 3. Click Next. 4. Figure 2-3: Import Virtual Machine 5. Click the Browse button and browse to where you downloaded the Hyper-V files. 6. Select the LoadMaster VLM folder (under the top-level folder LoadMaster-VLM-n.n-nn- HYPERV, where n.n-nn is the build number) and click the Select Folder button. Copyright KEMP Technologies, Inc. All Rights Reserved. 8
9 7. Select the VLM and click Next. Figure 2-4: Select the VLM 8. Select the Copy the virtual machine (create a new unique ID) option. 9. Choose your destination and hard disks. 10. Click the Import button. 11. The virtual machine should be imported and should now appear within the Virtual Machines pane in the Hyper-V Manager. 2.3 Check the Network Adapter Settings Before starting the VLM we must first verify that the network adapters are configured correctly. 1. Right-click on the virtual machine you have imported within the Virtual Machines pane. 2. Click on the Settings option. 3. Click on the Network Adapter or Legacy Network Adapter option within the Hardware list. KEMP recommend selecting the Network Adapter option as it provides much higher performance and less load on the host. Copyright KEMP Technologies, Inc. All Rights Reserved. 9
10 4. Ensure that the network adapter is configured correctly. Ensure that the network adapter is connected to the correct virtual network. Expand the Network Adapter menu and Select the Static option within the MAC address section and enter the relevant MAC address. Ensure that the Enable spoofing of MAC addresses checkbox is selected. Figure 2-5: Network Adapter settings 5. Click on the OK button. 6. Repeat these steps for the second network adapter. Jumbo frames are supported for Hyper-V network synthetic drivers. Copyright KEMP Technologies, Inc. All Rights Reserved. 10
11 2.4 Power On the LoadMaster Once the VLM has been deployed it can be powered on: 1. Right-click the Virtual Machine that was imported within the Virtual Machines pane. 2. Click Start. The VLM should begin to boot up. 3. Right-click the VLM and select Connect to open the console window. Figure 2-6: IP address 4. The VLM should obtain an IP address via DHCP. Make a note of this address. If the VLM does not obtain an IP address, or if the IP address needs to be changed, it can be manually configured in the console by following the steps in Section Licensing and Configuration The LoadMaster must now be configured to operate within the network configuration. 1. In an internet browser, enter the IP address that was noted previously. 2. Ensure to enter before the IP address. 3. A warning may appear regarding website security certificates. Please click the continue/ignore option. 4. The LoadMaster End User License Agreement screen appears. Please read the license agreement and, if willing to accept the conditions therein, click the Agree button to proceed. Copyright KEMP Technologies, Inc. All Rights Reserved. 11
12 Figure 2-7: License type selection 5. Select the relevant license type. 6. A section will then appear asking if you are OK with the LoadMaster regularly contacting KEMP to check for updates and other information. Click the relevant button to proceed. Figure 2-8: License Required 7. If using the Online licensing method, fill out the fields and click License Now. If you are starting with a trial license, there is no need to enter an Order ID. If you are starting with a permanent license, enter the KEMP Order ID# if this was provided to you. If using the Offline Licensing method, select Offline Licensing, obtain the license text, paste it into the License field and click Apply License. For detailed instructions on how to register for a KEMP ID and license the LoadMaster, refer to the Licensing, Feature Description. 8. The Change Password screen appears. Copyright KEMP Technologies, Inc. All Rights Reserved. 12
13 9. Enter a password for the bal user in the Password input field and retype it in the Retype Password input field. 10. The login screen appears again, enter the bal user name and the new password as defined in the previous step. 11. In the screen informing that the password has changed, click the Continue button 12. If the machine has shipped with a temporary license, a warning will appear informing that a temporary license has been installed on the machine and for how long the license is valid. 13. Click on the OK button 14. The Appliance Vitals screen of the LoadMaster will appear. Copyright KEMP Technologies, Inc. All Rights Reserved. 13
14 Figure 2-9: Appliance Vitals 15. Go to System Configuration > Network Setup in the main menu. 16. Click the eth0 menu option within the Interfaces section. 17. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the network facing interface of the LoadMaster, in the Interface Address input field. 18. Click on the Set Address button 19. Click on the eth1 menu option within the Interfaces section 20. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farmside interface of the LoadMaster, in the Interface Address input field. 21. Click on the Set Address button This interface is optional, depending on the network configuration. 22. Click on the Local DNS Configuration > Hostname Configuration menu option. Copyright KEMP Technologies, Inc. All Rights Reserved. 14
15 23. In the Hostname configuration screen, enter the hostname into the Current Hostname input field. 24. Click on the Set Hostname button. 25. Click on the Local DNS Configuration > DNS Configuration menu option. 26. In the DNS configuration screen, enter the IP address(es) of the DNS Server(s) which will be used to resolve names locally on the LoadMaster into the DNS NameServer input field. 27. Click on the Add button. 28. Enter the domain name that is to be prepended to requests to the DNS nameserver into the DNS NameServer input field. 29. Click the Add button. 30. Click the System Configuration > Network Setup > Default Gateway menu option. 31. In the DNS configuration screen, enter the IP address of the default gateway into the IPv4 Default Gateway Address input field. 32. If you have an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway Address input field. 33. Click the Set IPv4 Default Gateway button. Copyright KEMP Technologies, Inc. All Rights Reserved. 15
16 The LoadMaster is now fully installed and ready to be used. For further information on how to configure and implement the Virtual LoadMaster, please refer to the LoadMaster documentation which can be downloaded from the page. Copyright KEMP Technologies, Inc. All Rights Reserved. 16
17 Troubleshooting 3 Troubleshooting 3.1 Cannot access the Web User Interface If a connection to the WUI cannot be established, network settings can be configured via the console view. 1. Login into the VLM via the console using the settings: lb100 login: bal Password: 1fourall Figure 3-1: Enter IP address 2. Enter the IP address of the eth0 interface, the network-facing interface of the LoadMaster, in the input field within the Network Side Interface Address field and press Enter on the keyboard. Figure 3-2: Enter default gateway address 3. Enter the IP address of the Default Gateway. Copyright KEMP Technologies, Inc. All Rights Reserved. 17
18 Troubleshooting Figure 3-3: Nameserver IP addresses 4. Enter a space-separated list of nameserver IP addresses. 5. A message will appear asking to continue licensing via the WUI. Try to access the IP address via a web browser. Ensure to enter before the IP address. 6. Contact the local KEMP Customer Services Representative for further support if needed. 3.2 NIC Types Cannot Be Mixed If you add new Network Adapters to a VLM then they must be of the same Adapter Type as those already configured on the VLM. If you install a Network Adapters with a different Adapter Type as those already configured on the VLM the VLM will not recognize the new interface. 3.3 Static MAC Addresses Must Be Configured In case you move a VLM system to a different Virtual Machine, ensure that the MAC addresses of the Virtual Machine s NICs stay the same. It is recommended to configure static MAC addresses for all NICs within Virtual Machines. For further information on configuring static MAC addresses, please refer to the relevant Hyper- V documentation. 3.4 Make this VM Highly Available Option is Greyed Out There is an option in the Virtual Machine Manager called Make this VM highly available. This option is set when the Virtual Machine is placed on a host. Therefore, the option will be greyed out, even when the Virtual Machine is not running. There is a way to work around this problem without having to delete and re-create the Virtual Machine. The Virtual Machine can be migrated. Follow the steps below to do this: 1. Open the Virtual Machine Manager console. 2. Right-click the relevant Virtual Machine that you want to make highly-available and select Migrate. 3. Select the current host from the list for migration. 4. Click Yes to the prompt asking if you want to make the Virtual Machine highly available. 5. The path can be changed if needed. Click Next. Copyright KEMP Technologies, Inc. All Rights Reserved. 18
19 Troubleshooting 6. Select the network and click Move. 7. Wait for the migration to complete. 3.5 Factory Reset If you perform a factory reset on the VLM, all configuration data, including the VLM s IP address is deleted. During the subsequent reboot the VLM attempts to obtain an IP address via DHCP. If the VLM is on a different subnet to the DHCP server then an IP address will not be obtained and the IP address is set to the default The VLM may not be accessible using this address. If this is the case then you must run through the quick setup via the console as described in Section 3.1 Copyright KEMP Technologies, Inc. All Rights Reserved. 19
20 References 4 References Unless otherwise specified, the below documents can be found at Microsoft Hyper-V Windows 2008 R2, Installation Guide Licensing, Feature Description Copyright KEMP Technologies, Inc. All Rights Reserved. 20
21 Document History Document History Date Change Reason for Change Version Resp. Jan 2015 Release update Updated for release 1.6 LB Feb 2015 Minor update Enhancement made 1.7 LB Apr 2015 Release update Updated for release 1.8 LB Sep 2015 Screenshot updates LoadMaster WUI reskin 3.0 KG Dec 2015 Release update Updated for LB Jan 2016 Release update Updated for a 5.0 LB Copyright KEMP Technologies, Inc. All Rights Reserved. 21
Migration Tool. Migration Tool (Beta) Technical Note
Migration Tool (Beta) Technical Note VERSION: 6.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo
More informationPacket Trace Guide. Packet Trace Guide. Technical Note
Packet Trace Guide Technical Note VERSION: 2.0 UPDATED: JANUARY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo
More informationRSA Two Factor Authentication
RSA Two Factor Authentication Feature Description VERSION: 6.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationVMware vcenter Log Insight Manager. Deployment Guide
VMware vcenter Log Insight Manager Deployment Guide VERSION: 6.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationLoadMaster VMware Horizon (with View) 6. Deployment Guide
LoadMaster VMware Horizon (with View) 6 Deployment Guide VERSION: 6.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the
More informationNTLM NTLM. Feature Description
Feature Description VERSION: 6.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered
More informationSplunk. Splunk. Deployment Guide
Deployment Guide VERSION: 1.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationMoodle. Moodle. Deployment Guide
Moodle Deployment Guide VERSION: 6.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered
More informationAdobe Connect. Adobe Connect. Deployment Guide
Deployment Guide VERSION: 1.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationEpic. Epic Systems. Deployment Guide
Epic Systems Deployment Guide VERSION: 1.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are
More informationLoadMaster for Azure (Marketplace Classic Interface)
LoadMaster for Azure (Marketplace Classic Interface) Feature Description VERSION: 8.0 UPDATED: OCTOBER 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies
More informationKEMP Driver for Red Hat OpenStack. KEMP LBaaS Red Hat OpenStack Driver. Installation Guide
KEMP LBaaS Red Hat OpenStack Driver Installation Guide VERSION: 2.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationMicrosoft Hyper-V Installation Guide
Installation Guide VERSION: 11.0 UPDATED: August 2017 Copyright Notices Copyright 2002-2017 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo are registered
More informationLoadMaster Clustering
Introduction LoadMaster Clustering Feature Description VERSION: 9.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationVirtual LoadMaster for Xen (Para Virtualized)
Virtual LoadMaster for Xen (Para Virtualized) VERSION: 1.10 UPDATED: MARCH 2014 Copyright 2002-2014 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 18 Copyright Notices Copyright 2002-2014 KEMP Technologies,
More informationCondor for Cisco UCS B-Series Blade Servers
Condor for UCS Condor for Cisco UCS B-Series Blade Servers VERSION: 1.3 UPDATED: MARCH 2015 Copyright 2002-2015 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 25 Condor for UCS Copyright Notices
More informationConfiguring Real Servers for DSR
Configuring Real Servers for DSR VERSION: 1.1 UPDATED: JULY 2013 Copyright 2002-2013 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 20 Copyright Notices Copyright 2002-2013 KEMP Technologies, Inc..
More informationMicrosoft Hyper-V. Installation Guide
Installation Guide UPDATED: 04 October 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationSDN Adaptive Load Balancing. Feature Description
SDN Adaptive Load Balancing Feature Description VERSION: 5.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationVirtual LoadMaster for KVM (Para Virtualized)
Virtual LoadMaster for KVM (Para Virtualized) Installation Guide VERSION: 1.8 UPDATED: SEPTEMBER 2013 Copyright 2002-2013 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 17 Copyright Notices Copyright
More informationEdge Security Pack (ESP)
Edge Security Pack (ESP) VERSION: 1.2 UPDATED: SEPTEMBER 2013 Copyright 2002-2013 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 22 Copyright Notices Copyright 2002-2013 KEMP Technologies, Inc..
More informationLoadMaster Clustering (Beta)
Introduction LoadMaster Clustering (Beta) Feature Description VERSION: 5.0 UPDATED: OCTOBER 2015 Copyright Notices Copyright 2002-2015 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and
More informationMS Lync MS Lync Deployment Guide
MS Lync 2013 Deployment Guide VERSION: 7.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered
More informationMS Skype for Business. Microsoft Skype for Business Deployment Guide
Microsoft Skype for Business 2015 Deployment Guide VERSION: 7.0 UPDATED: MARCH 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationLoadMaster VMware Horizon Access Point Gateway
LoadMaster VMware Horizon Access Point Gateway Deployment Guide VERSION: 1.0 UPDATED: OCTOBER 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies
More informationWeb Application Firewall (WAF) Feature Description
Web Application Firewall (WAF) Feature Description VERSION: 7.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationVMware ESX ESXi and vsphere. Installation Guide
VMware ESX ESXi and vsphere Installation Guide UPDATED: 28 March 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo
More informationGEO. Feature Description GEO VERSION: 1.4 UPDATED: MARCH Feature Description
GEO VERSION: 1.4 UPDATED: MARCH 2014 Copyright 2002-2014 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 21 Copyright Notices Copyright 2002-2014 KEMP Technologies, Inc.. All rights reserved.. KEMP
More informationVMware Horizon Workspace. VMware Horizon Workspace 1.5. Deployment Guide
VMware Horizon Workspace 1.5 Deployment Guide VERSION: 7.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationSSL Accelerated Services. SSL Accelerated Services for the LM FIPS. Feature Description
SSL Accelerated Services for the LM5305 - FIPS Feature Description VERSION: 7.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies
More informationHealth Checking. Health Checking. Feature Description
Feature Description VERSION: 1.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies logo are registered
More informationMT LoadMaster Cisco UCS C-Series. Multi-Tenant LoadMaster for Cisco UCS C-Series Rack Server. Installation Guide
Multi-Tenant LoadMaster for Cisco UCS C-Series Rack Installation Guide VERSION: 7.0 UPDATED: MARCH 2016 Table of Contents 1 Introduction... 3 1.1 Pre-requisites... 3 2... 4 2.1 Configure the Boot Options
More informationContent Switching with Exchange and Lync-related Workloads
Content Switching with Exchange and Lync-related Workloads Technical Note VERSION: 6.0 UPDATED: JULY 2016 AUTHOR: Michael Van Horenbeek Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All
More informationKerberos Constrained Delegation. Kerberos Constrained Delegation. Feature Description
Kerberos Constrained Delegation Feature Description VERSION: 9.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP Technologies
More informationDirectAccess. Windows Server 2012 R2 DirectAccess. Deployment Guide
Windows Server 2012 R2 DirectAccess Deployment Guide VERSION: 9.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationHardware LoadMaster. Installation Guide
Installation Guide UPDATED: 16 October 2017 Copyright Notices Copyright 2002-2017 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationMicrosoft Hyper-V 2012
KEMP360 Central with Microsoft Hyper-V 2012 Installation Guide VERSION: 5.0 UPDATED: JUNE 2016 Table of Contents 1 Introduction... 3 1.1 Document Purpose... 3 1.2 Intended Audience... 3 1.3 Prerequisites...
More informationMT LoadMaster - Dell R-Series. Multi-Tenant LoadMaster for the Dell R-Series. Installation Guide
Multi-Tenant LoadMaster for the Dell R-Series Installation Guide VERSION: 8.0 UPDATED: MARCH 2016 Table of Contents 1 Introduction... 3 2 Connect the Dell R-Series... 4 2.1 Install the Multi-Tenant LoadMaster...
More informationCisco UCS C-Series. Installation Guide
Installation Guide UPDATED: 04 October 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationBar Code Discovery. Administrator's Guide
Bar Code Discovery Administrator's Guide November 2012 www.lexmark.com Contents 2 Contents Overview...3 Configuring the application...4 Configuring the application...4 Configuring Bar Code Discovery...4
More informationWeb User Interface (WUI) LM5305 FIPS
Web User Interface (WUI) LM5305 FIPS VERSION: 1.1 UPDATED: JULY 2013 Copyright 2002-2013 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 86 Copyright Notices Copyright 2002-2013 KEMP Technologies,
More informationKEMP360 Central - VMware vsphere. KEMP360 Central using VMware vsphere. Installation Guide
KEMP360 Central using VMware vsphere Installation Guide VERSION: 5.0 UPDATED: JUNE 2016 Table of Contents 1 Introduction... 3 1.1 Document Purpose... 3 1.2 Intended Audience... 3 Prerequisites... 3 2 Installing
More informationTenable Hardware Appliance Upgrade Guide
Tenable Hardware Appliance Upgrade Guide June 4, 2012 (Revision 3) The newest version of this document is available at the following URL: http://static.tenable.com/prod_docs/tenable_hardware_appliance_upgrade.pdf
More informationOpen Source Used In Cisco Configuration Professional for Catalyst 1.0
Open Source Used In Cisco Configuration Professional for Catalyst 1.0 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on
More informationiwrite technical manual iwrite authors and contributors Revision: 0.00 (Draft/WIP)
iwrite technical manual iwrite authors and contributors Revision: 0.00 (Draft/WIP) June 11, 2015 Chapter 1 Files This section describes the files iwrite utilizes. 1.1 report files An iwrite report consists
More informationEnterprise Payment Solutions. Scanner Installation April EPS Scanner Installation: Quick Start for Remote Deposit Complete TM
Enterprise Payment Solutions Complete TM Portions of this software: Copyright 2004-2013 Apache Software Foundation Copyright 2005 Paul Querna Copyright 2008 Marc Gravell Copyright 2000-2007 Niels Provos
More informationSimba Cassandra ODBC Driver with SQL Connector
Simba Cassandra ODBC Driver with SQL Connector Last Revised: March 26, 2013 Simba Technologies Inc. Copyright 2012-2013 Simba Technologies Inc. All Rights Reserved. Information in this document is subject
More informationKEMP 360 Central for vsphere. Installation Guide
KEMP 360 Central for vsphere Installation Guide UPDATED: 09 October 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo
More informationKEMP 360 Central Activation Server
KEMP 360 Central Activation Server Feature Description VERSION: 7.0 UPDATED: JANUARY 2017 Table of Contents 1 Introduction... 3 1.1 Document Purpose... 3 1.2 Intended Audience... 3 1.3 Prerequisites...
More informationInstalling the Shrew Soft VPN Client
Windows Install Installing the Shrew Soft VPN Client ShrewVPNWindows201211-01 Global Technology Associates 3505 Lake Lynda Drive Suite 109 Orlando, FL 32817 Tel: +1.407.380.0220 Fax. +1.407.380.6080 Email:
More informationTechnics Audio Player User Guide
Technics Audio Player User Guide Overview Technics Audio Player is simple GUI audio player software for Windows and Mac OS with high-resolution audio data processing capabilities. When connected to Technics
More informationWeb User Interface (WUI) LM FIPS
Web User Interface (WUI) LM5305 - FIPS Configuration Guide VERSION: 7.0 UPDATED: JULY 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the
More informationEcma International Policy on Submission, Inclusion and Licensing of Software
Ecma International Policy on Submission, Inclusion and Licensing of Software Experimental TC39 Policy This Ecma International Policy on Submission, Inclusion and Licensing of Software ( Policy ) is being
More informationPanasonic Audio Player 2 User Guide
Panasonic Audio Player 2 User Guide ASIO is a trademark and software of Steinberg Media Technologies GmbH. Overview Panasonic Audio Player 2 is simple GUI audio player software for Windows and Mac OS with
More informationEcma International Policy on Submission, Inclusion and Licensing of Software
Ecma International Policy on Submission, Inclusion and Licensing of Software Experimental TC39 Policy This Ecma International Policy on Submission, Inclusion and Licensing of Software ( Policy ) is being
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. Approved November 6, Effective Date: November 10, 2008
IETF TRUST Legal Provisions Relating to IETF Documents Approved November 6, 2008 Effective Date: November 10, 2008 1. Background The IETF Trust was formed on December 15, 2005, for, among other things,
More informationIETF TRUST. Legal Provisions Relating to IETF Documents. February 12, Effective Date: February 15, 2009
IETF TRUST Legal Provisions Relating to IETF Documents February 12, 2009 Effective Date: February 15, 2009 1. Background The IETF Trust was formed on December 15, 2005, for, among other things, the purpose
More informationWeb User Interface (WUI)
2201 Web User Interface (WUI) Configuration Guide VERSION: 11.0 UPDATED: AUGUST 2016 Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationUser Guide. Calibrated Software, Inc.
User Guide Calibrated Software, Inc. Copyright 2008 Calibrated Software, Inc. All rights reserved. www.calibratedsoftware.com Your rights to the software are governed by the accompanying Software License
More informationSkyPilot OS Installation: Fedora Core 5
SkyPilot OS Installation: Fedora Core 5 PN 671-00024-01 2006 SkyPilot Networks, Inc. All rights reserved This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose.
More informationCopyright PFU LIMITED
-------------------------------------------------------- PaperStream Capture 1.0.12 README File -------------------------------------------------------- Copyright PFU LIMITED 2013-2015 This file contains
More informationCommand Line Interface (CLI)
Command Line Interface (CLI) VERSION: 1.1 UPDATED: JULY 2013 Copyright 2002-2013 KEMP Technologies, Inc. All Rights Reserved. Page 1 / 30 Copyright Notices Copyright 2002-2013 KEMP Technologies, Inc..
More informationOpen Source Used In TSP
Open Source Used In TSP 3.5.11 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices.
More informationCover Page. Video Manager User Guide 10g Release 3 ( )
Cover Page Video Manager User Guide 10g Release 3 (10.1.3.3.0) March 2007 Video Manager User Guide, 10g Release 3 (10.1.3.3.0) Copyright 2007, Oracle. All rights reserved. Contributing Authors: Bruce Silver
More informationLoadMaster Deployment Guide
LoadMaster Deployment Guide For Microsoft Lync 2010 Version: 1.5 Updated: November 2012 Copyright Notices Copyright 2002-2012 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies and the KEMP
More informationUser Manual. Date Aug 30, Enertrax DAS Download Client
EnertraxDL - DAS Download Client User Manual Date Aug 30, 2004 Page 1 Copyright Information Copyright 2004, Obvius Holdings, LLC. All rights reserved. Redistribution and use in source and binary forms,
More informationAdditional License Authorizations for HPE OneView for Microsoft Azure Log Analytics
Additional License Authorizations for HPE OneView for Microsoft Azure Log Analytics Product Use Authorizations This document provides Additional License Authorizations for HPE OneView for Microsoft Azure
More informationPageScope Box Operator Ver. 3.2 User s Guide
PageScope Box Operator Ver. 3.2 User s Guide Box Operator Contents 1 Introduction 1.1 System requirements...1-1 1.2 Restrictions...1-1 2 Installing Box Operator 2.1 Installation procedure...2-1 To install
More informationSD1306. Speed Dome IP Camera. Quick User Guide
SD1306 Speed Dome IP Camera Quick User Guide Table of Contents I. Camera Introduction... 1 1. Package Contents... 1 2. Hardware Installation... 2 2.1 Factory Default... 6 3. SD card Compatibility List...
More informationManagement Software Web Browser User s Guide
FS900M Series Fast Ethernet Switches Management Software Web Browser User s Guide 613-002073 Rev. A Copyright 2014, Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced
More informationDocumentation Roadmap for Cisco Prime LAN Management Solution 4.2
Documentation Roadmap for Cisco Prime LAN Thank you for purchasing Cisco Prime LAN Management Solution (LMS) 4.2. This document provides an introduction to the Cisco Prime LMS and lists the contents of
More informationSDLC INTELLECTUAL PROPERTY POLICY
SDLC INTELLECTUAL PROPERTY POLICY Last Revised: 11/14/17 1. Introduction. This Intellectual Property Policy ( Policy ) governs intellectual property rights of the SDL Consortium ( SDLC ) and its Members
More informationNetApp Cloud Volumes Service for AWS
NetApp Cloud Volumes Service for AWS AWS Account Setup Cloud Volumes Team, NetApp, Inc. March 29, 2019 Abstract This document provides instructions to set up the initial AWS environment for using the NetApp
More informationConettix Universal Dual Path Communicator B465
Conettix Universal Dual Path Communicator B465 en Release Notes Conettix Universal Dual Path Communicator Table of contents en 3 Table of contents 1 Introduction 4 1.1 Requirements 4 2 Version 2.00.000
More informationExchange 2016 Deployment Guide. Exchange Deployment Guide
Exchange 2016 Deployment Guide Exchange 2016 Deployment Guide VERSION: 3.0 UPDATED: JULY 2016 Introduction Copyright Notices Copyright 2002-2016 KEMP Technologies, Inc.. All rights reserved.. KEMP Technologies
More informationJuniper Networks Steel-Belted Radius Carrier
Juniper Networks Steel-Belted Radius Carrier Installation Guide Release 8.3.0 Modified: 2017-03-07 Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net
More informationPolycom RealPresence Resource Manager System
Upgrade Guide 8.2.0 July 2014 3725-72106-001E Polycom RealPresence Resource Manager System Copyright 2014, Polycom, Inc. All rights reserved. No part of this document may be reproduced, translated into
More informationQuest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers
Quest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers INTRODUCTION Setup of Quest VROOM requires installation of Rapid Recovery and Foglight for Virtualization
More informationTrimble. ecognition. Release Notes
Trimble ecognition Release Notes Trimble Documentation: ecognition 8.9 Release Notes Imprint and Version Document Version 8.9 Copyright 2013 Trimble Germany GmbH. All rights reserved. This document may
More informationMulti-Tenant LoadMaster
Multi-Tenant LoadMaster Feature Description VERSION: 7.0 UPDATED: MARCH 2016 Table of Contents 1 Introduction... 3 1.1 Licensing... 3 1.2 Document Purpose... 3 1.3 Intended Audience... 3 2 Features...
More informationFujitsu ScandAll PRO V2.1.5 README
-------------------------------------------------------- Fujitsu ScandAll PRO V2.1.5 README -------------------------------------------------------- Copyright PFU Limited 2007-2017 This file contains information
More informationColdFusion Builder 3.2 Third Party Software Notices and/or Additional Terms and Conditions
ColdFusion Builder 3.2 Third Party Software Notices and/or Additional Terms and Conditions Date Generated: 2018/09/10 Apache Tomcat ID: 306 Apache Foundation and Contributors This product includes software
More informationSonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6. Getting Started Guide
SonicWall Secure Mobile Access SMA 500v Virtual Appliance 8.6 Getting Started Guide Copyright 2017 SonicWall Inc. All rights reserved. SonicWall is a trademark or registered trademark of SonicWall Inc.
More informationQuest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers
Quest VROOM Quick Setup Guide for Quest Rapid Recovery for Windows and Quest Foglight vapp Installers INTRODUCTION Setup of Quest VROOM requires installation of Rapid Recovery and Foglight for Virtualization
More informationCover Page. Site Studio Tutorial Setup Guide 10g Release 3 ( )
Cover Page Site Studio Tutorial Setup Guide 10g Release 3 (10.1.3.3.0) March 2007 Site Studio Tutorial Setup Guide, 10g Release 3 (10.1.3.3.0) Copyright 2007, Oracle. All rights reserved. Contributing
More informationSophos Endpoint Security and Control standalone startup guide
Sophos Endpoint Security and Control standalone startup guide Product version: 10.2 Document date: September 2012 Contents 1 Before you begin...3 2 Install Sophos Endpoint Security and Control...4 3 Configure
More informationCopyright PFU LIMITED 2016
-------------------------------------------------------- PaperStream Capture Lite 1.0.1 README File -------------------------------------------------------- Copyright PFU LIMITED 2016 This file contains
More informationTable of Contents Overview...2 Selecting Post-Processing: ColorMap...3 Overview of Options Copyright, license, warranty/disclaimer...
1 P a g e ColorMap Post-Processing Plugin for OpenPolScope software ColorMap processing with Pol-Acquisition and Pol-Analyzer plugin v. 2.0, Last Modified: April 16, 2013; Revision 1.00 Copyright, license,
More informationPolycom RealPresence Access Director System, Virtual Edition
Getting Started Guide Version 4.0 July 2014 3725-78702-002D Polycom RealPresence Access Director System, Virtual Edition Copyright 2014, Polycom, Inc. All rights reserved. No part of this document may
More informationIntel Stress Bitstreams and Encoder (Intel SBE) 2017 AVS2 Release Notes (Version 2.3)
Intel Stress Bitstreams and Encoder (Intel SBE) 2017 AVS2 Release Notes (Version 2.3) Overview Changes History Installation Package Contents Known Limitations Attributions Legal Information Overview The
More informationAltaVault Cloud Integrated Storage Installation and Service Guide for Virtual Appliances
AltaVault Cloud Integrated Storage 4.4.1 Installation and Service Guide for Virtual Appliances April 2018 215-130007_B0 doccomments@netapp.com Table of Contents 3 Contents System requirements and supported
More informationPRODUCT SPECIFIC LICENSE TERMS Sybase Enterprise Portal Version 5 Enterprise Edition ( Program )
PRODUCT SPECIFIC LICENSE TERMS Sybase Enterprise Portal Version 5 Enterprise Edition ( Program ) IN ADDITION TO THE LICENSE TERMS SET OUT IN THE SYBASE LICENSE AGREEMENT, THE FOLLOWING ADDITIONAL OR DIFFERENT
More informationMagicInfo Express Content Creator
MagicInfo Express Content Creator MagicInfo Express Content Creator User Guide MagicInfo Express Content Creator is a program that allows you to conveniently create LFD content using a variety of templates.
More informationPTZ Control Center Operations Manual
PTZ Control Center Operations Manual Introduction PTZ Control Center is an application software that runs on Windows. By running this software on a Windows PC, you can remotely operate the Panasonic cameras
More informationCA File Master Plus. Release Notes. Version
CA File Master Plus Release Notes Version 9.0.00 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation ) is for
More informationDell SonicWALL SonicOS 5.9 Upgrade Guide
Dell SonicWALL Upgrade Guide April, 2015 This provides instructions for upgrading your Dell SonicWALL network security appliance to from a previous release. This guide also provides information about importing
More informationUS Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Service Data Objects (SDO) DFED Sample Application README Copyright IBM Corporation, 2012, 2013 US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract
More informationPRODUCT SPECIFIC LICENSE TERMS Sybase Enterprise Portal Version 5 Application Edition ( Program )
PRODUCT SPECIFIC LICENSE TERMS Sybase Enterprise Portal Version 5 Application Edition ( Program ) IN ADDITION TO THE LICENSE TERMS SET OUT IN THE SYBASE LICENSE AGREEMENT, THE FOLLOWING ADDITIONAL OR DIFFERENT
More informationUse in High-Safety Applications
------ ScanSnap Organizer V5.5L31 README File ------ - Contents - 1. Cautions for using environment-dependent characters 2. Cautions Concerning Installation 3. Cautions Concerning the Operation 4. Connecting
More informationCisco CSPC 2.7x. Configure CSPC Appliance via CLI. Feb 2018
Cisco CSPC 2.7x Configure CSPC Appliance via CLI Feb 2018 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5 Contents Table of Contents 1. CONFIGURE CSPC
More information