IBM Cloud Client Technical Engagement Education Network Columbus, Ohio

Size: px

Start display at page:

Download "IBM Cloud Client Technical Engagement Education Network Columbus, Ohio"

Harriet Logan
6 years ago
Views:

1 IBM Cloud Client Technical Engagement Education Network Columbus, Ohio In order to access the lab environment you need to install a VPN client. Please follow these instructions to install the Connect Tunnel client Table of Contents Windows Install... 2 Linux Install... 9 Mac Install Test

2 Installation procedure for Connect Tunnel client: Windows operating systems 1. Listed below are the operating systems supported by the virtual private network (VPN) client. Please note that the VPN client has specific browser and installation requirements for the Windows operating systems. After you have verified that your workstation meets the specified requirements, continue to Step 2 to download the VPN client package and installation instructions. If your workstation does not meet these requirements, contact support. Operating system Browser Notes Windows 10 Not Applicable Administrator rights required for installation Windows 8.x (32-bit/64-bit) Windows 7 (32-bit/64-bit) 2. Download and run the Connect Tunnel client installation software. Click on the link below that relates to the OS you are running. For 32-bit Windows: For 64-bit Windows: 3. To begin the installation, locate and double-click the Dell Connect client package you downloaded in step When the installation is complete, the Dell VPN Connection icon appears on the desktop. 2

3 5. From the desktop, double-click the Dell VPN Connection icon. If the icon does not appear on the desktop, select Start > All Programs > Dell Secure Mobile Access > Dell VPN Connection. 6. When the Dell VPN Connection Setup Wizard window appears, click Next. 7. When prompted for the appliance host name or IP address, enter we-socks.pok.ibm.com. Click Next. 3

8. When prompted for the login group, select WED Realm from the drop-down list. Click Next. Note: There are other realms, but they are used by select groups.

4 8. When prompted for the login group, select WED Realm from the drop-down list. Click Next. Note: There are other realms, but they are used by select groups. You will be notified by your administrator if you are to select a different realm. Here is a list of the other realms. Education Realm (Special use only) ISSW Realm (ISSW sandbox users) Local Realm (Special use only) Rational Realm (Rational users) WWBP Realm (WWBP users) WED (Default realm for most users) 4

5 9. Click Finish. 5

IMPORTANT NOTE: This is NOT your student id and password that will be used for your upcoming class.

6 10. When the log in window appears enter username: connection_test and password: anonymous. Click Connect. Note: The test connection user ID requires an underscore between connection and test (connection_test). IMPORTANT NOTE: This is NOT your student id and password that will be used for your upcoming class. That information will be either sent to you in your class or given to you by the instructor during class. From now on when you click the Dell VPN session icon from the desktop, this window will appear. For your class replace the default values with those provided to you for the class. 11. When the connection is complete, the Dell VPN session icon will appear in the icon tray. You can now proceed to access network resources assigned to you. 12. When you are finished working with network resources, right-click on the Dell VPN session icon located in the icon tray and click Disconnect. 6

If challenged by a firewall, select the option to always permit the VPN manager program to access the Internet (Symantec

7 13. Go to Test Network Access Addendum: 1. In the event Dell automatically upgrades the client, the following window appears. This is a rare occurrence. 2. If challenged by a firewall, select the option to always permit the VPN manager program to access the Internet (Symantec Client Firewall is shown as an example. Your firewall warning may differ.). 3. If prompted by a firewall, select the option to trust the network for the IBM Gateway Columbus, Ohio network (Symantec Client Firewall is shown 7

8 as an example. Your firewall network detection may differ.). 8

9 Installation procedure for Connect Tunnel client: Linux operating systems 1. Listed below are the operating systems supported by the virtual private network (VPN) client. Please note that the VPN client has specific browser and installation requirements for the Linux operating systems. After you have verified that your workstation meets the specified requirements, continue to Step 2 to download the VPN client package and installation instructions. If your workstation does not meet these requirements, contact support. Operating system Browser Notes Linux x86 kernel 3.X or later Firefox or later Administrator rights required for installation Browser required only for proxy detection 2. Download and run the Connect Tunnel client installation software. Click on the link below that relates to the OS you are running. For 32-bit Linux: For 64-bit Linux: 3. When you click on the above URL, click Save File and click OK. 9

10 4. Click ConnectTunnel-Linux64.tar. 10

11 5. Click Extract. 6. Click Create Folder. 7. Enter /tmp/dellvpn under Name, then Enter 8. Click Extract 11

12 9. Click Close 10. If not logged in as root change to root. 11. From the command line change to /tmp/dellvpn and execute the command./install.sh. 12

13 12. Status messages will appear during installation. 13. Enter the command: startct. When prompted for Appliance HOST/IP, enter: we-socks.pok.ibm.com 14. Enter the number associated with the login group WED Realm and press Enter. 13

Note: There are other realms, but they are used by select groups. You will be notified by your administrator if you are to select a different realm. Here is a list of the other realms.

14 Note: There are other realms, but they are used by select groups. You will be notified by your administrator if you are to select a different realm. Here is a list of the other realms. Education Realm (Special use only) ISSW Realm (ISSW sandbox users) Local Realm (Special use only) Rational Realm (Rational users) WWBP Realm (WWBP users) WED (Default realm for most users) 15. Enter the username connection_test and password anonymous and press Enter. IMPORTANT NOTE: This is NOT your student id and password that will be used for your upcoming class. That information will be either sent to you in your class or given to you by the instructor during class. For your class replace the default values with those provided to you for the class. 16. Go to Test Network Access 14

15 Installation procedure for Connect Tunnel client: Mac operating systems 1. Listed below are the operating systems supported by the virtual private network (VPN) client. Please note that the VPN client has specific browser and installation requirements for the Mac operating systems. After you have verified that your workstation meets the specified requirements, continue to Step 2 to download the VPN client package and installation instructions. If your workstation does not meet these requirements, contact support. Operating system Browser Notes Mac OSX v10.10.x.x Mac OSX v10.9.x Not Applicable Administrator rights required for installation Java 1.8 update 60 Mac OSX v10.8.x (64-bit only) 2. Download and run the Connect Tunnel client installation software. Click on this link: 3. Download the ConnectTunnel-OSX64.dmg file. 4. Find the ConnectTunnel-OSX64.dmg file in the Downloads folder and double-click it to begin the installation. 5. When the Connect Tunnel window appears, double-click the Connect Tunnel.pkg file. 15

16 6. Click Continue on the Introduction window. 7. If prompted to select a destination, select the disk on which to install the software and click Continue. 8. Click Install on the Installation Type window. 16

17 9. When the install has completed successfully, click Close. 10. Start the Connect Tunnel by selecting it from the Applications folder. 11. When the application opens, click Add configuration twice. 17

18 12. Enter the configuration Name and Server and click Save. Configuration Name: WebSphere Education Host name: we-socks.pok.ibm.com 13. Click Connect to proceed with your first connection. 18

19 14. When prompted for the login group, select WED Realm from the drop-down list. Click OK. Note: There are other realms, but they are used by select groups. You will be notified by your administrator if you are to select a different realm. Here is a list of the other realms. Education Realm (Special use only) ISSW Realm (ISSW sandbox users) Local Realm (Special use only) Rational Realm (Rational users) WWBP Realm (WWBP users) WED (Default realm for most users) 15. Enter the VPN Username connection_test and Password anonymous, and click OK. 19

20 IMPORTANT NOTE: This is NOT your student id and password that will be used for your upcoming class. That information will be either sent to you in your class or given to you by the instructor during class. For your class replace the default values with those provided to you for the class. 16. Once the connection is established, you see the Dell VPN Connection icon in the status bar. The icon includes a green spot or a red X depending on if the state is connected or not. 17. When you are finished working with network resources, click on the Dell VPN Connection icon located in the status bar and select Disconnect. 18. Go to Test Network Access 20

21 Test network access procedures: All operating systems There are two tests you can run to ensure that your network connections are operating properly. Network speed test The speed test utility will test the network bandwidth between your workstation and the IBM Gateway - Columbus, Ohio network. If you experience connectivity issues during the course, you may be asked to run this test and report the results to the support team or the course instructor. Resource access test If you are going to be accessing a VM image for class lab exercises, the resource connection test ensures that you can access a lab test image. The VPN session is operating properly if you are able to successfully access the test lab image. When your class begins you will be assigned a lab image that you will use to perform exercises. Network speed test 1. Make sure you have an open VPN session to the IBM Gateway Columbus, Ohio network. 2. Click speed test below. A new browser window will open. speed test 3. This network test checks the network bandwidth speed for your VPN session. To start the test, click Begin Test. The test will check both upload and download speeds. 21

0 Mbps: Expect adequate performance. Greater than 2.

22 4. Compare your test results against the legend: Less than 1.0 Mbps: Expect significant performance issues. 1.0 Mbps 2.0 Mbps: Expect adequate performance. Greater than 2.0 Mbps: Expect excellent performance. 5. Test complete. Resource access test 1. Make sure you have an open VPN session to the IBM Gateway Columbus, Ohio network. 22

23 2. Click lab test image below. A new browser window will open. lab test image 3. If prompted with a security warning, click Run. Optionally, you may check Do not show this again for apps from the publisher and location above. 4. The RealVNC logo and copyright will eventually appear in the upper-right corner of the browser. To begin the new VNC Viewer connection, click Connect. 23

24 5. When prompted anonymous for the password. Click OK. 24

25 6. When the lab image appears your test connection is successful. Your actual lab image will not be available until the day of class. Close the VNC window using the Close button located in the upper-right corner. 7. Test complete. 25

Installation procedure for Connect Tunnel client: Windows operating systems

Installation procedure for Connect Tunnel client: Windows operating systems 1. Access the IBM Gateway Dublin, Ohio network client download site at: http://wtte-gateway1.pok.ibm.com/we_downloads.htm 2.