ESET SECURE AUTHENTICATION. SonicWall SSL VPN Integration Guide

Transcription

1 ESET SECURE AUTHENTICATION SonicWall SSL VPN Integration Guide

2 ESET SECURE AUTHENTICATION Copyright 2018 by ESET, spol. s r.o. ESET Secure Authenti ca ti on wa s devel oped by ESET, s pol. s r.o. For more i nforma ti on vi s i t et.com. Al l ri ghts res erved. No pa rt of thi s documenta ti on ma y be reproduced, s tored i n a retri eva l s ys tem or tra ns mi tted i n a ny form or by a ny mea ns, el ectroni c, mecha ni ca l, photocopyi ng, recordi ng, s ca nni ng, or otherwi s e wi thout permi s s i on i n wri ti ng from the a uthor. ESET, s pol. s r.o. res erves the ri ght to cha nge a ny of the des cri bed a ppl i ca ti on s oftwa re wi thout pri or noti ce. Cus tomer Ca re Worl dwi de: et.eu/s upport Cus tomer Ca re North Ameri ca : et.com/s upport REV. 3/7/2018

3 Contents 1. Overview Prerequisites Integration...6 instructions 4. Troubleshooting...7

4 1. Overview This document describes how to enable ESET Secure Authentication (ESA) Two-Factor Authentication (2FA) for a SonicWall SRA VPN device. This integration guide utilizes VPN validates AD user name and password VPN type for this particular VPN appliance. If you wish to utilize other VPN type, refer to generic description of VPN types and verify with the vendor if the VPN appliance supports it. 4

5 2. Prerequisites Configuring the VPN device for 2FA requires: A functional ESA RADIUS server that has your SonicWall SSL VPN device configured as a client, as shown in Figure 1. Note: To prevent locking any existing, non-2fa enabled AD users out of your VPN, we recommend that you allow Active Directory passwords without OTPs during the transitioning phase. It is also recommended that you limit VPN access to a security group (for example VPNusers). A SonicWall SRA SSL-VPN Appliance. The supported appliances are: E-Class SRA Series SRA Series RA Series (although interfaces may differ from this guide, the same concepts will apply) Figure 1 This screenshot shows The RADIUS client settings for your SonicWall VPN device. Note that the check boxes next to Mobile Application, Compound Authentication and Active Directory passwords without OTPs must be selected and the IP Address is the internal address of your SonicWall appliance. 5

6 3. Integration instructions 1. Add a RADIUS Server: a. Using a web browser, Log into the SonicWall administrative interface. b. Navigate to Portal > Domain on the left. c. Click Add Domain. d. From the Authentication type drop-down menu, select Radius. e. Enter a descriptive name for the authentication domain in the Domain Name field, for example, ESA Radius. f. Under Primary Radius Server, enter the following details: i. Radius Server Address: The IP address of your ESA RADIUS server. ii. Radius server port: 1812 (or custom port if you are overriding). iii. Secret Password: As shown in Figure 1 iv. Radius Timeout: 30 seconds v. Max retries: 2 vi. Portal Layout Name: Select your portal layout. vii.optionally, add the details of a backup ESA RADIUS server. g. Click Add to update the configuration. The domain will be added to the Domain Settings table. 2. Testing the connection: a. Connect to your SSL-VPN using a user account that has been configured to use with Mobile Application 2FA using ESA. When prompted for a password, append the OTP generated by the Mobile Application to your AD password. For example, if the user has an AD password of Esa123 and an OTP of , type in Esa

7 4. Troubleshooting If you are unable to authenticate via the ESA RADIUS server, ensure that you have performed the following steps: 1. If this is a new SonicWall VPN setup, try logging in with your AD credentials only before adding two-factor authentication. This will make troubleshooting easier. 2. Run a smoke test against your RADIUS server, as described in the Verifying ESA RADIUS Functionality document. 3. Verify that RADIUS authentication is enabled on the SonicWall server: a. Navigate to the VPN window in the administrative interface and select the Configure tab. b. In the Security Association field,select GroupVPN. c. Select the check box next to Require XAUTH/RADIUS. 4. Verify that there is no firewall blocking UDP 1812 between your VPN device and your RADIUS server. 5. If you are still unable to connect, contact ESET technical support. 7