PureVPN's OpenVPN Setup Guide for pfsense (2.3.2)

Transcription

1 PureVPN's OpenVPN Setup Guide for pfsense (2.3.2) pfsense is an open source firewall and router that is available completely free of cost. It offers load balancing, unified threat management along with multi WAN amongst other features for those particularly concerned about their online security. Fortunately, users can further enhance its capabilities via PureVPN s OpenVPN, which can be setup on pfsense (2.3.2) by keeping the following steps in mind: Things to Consider: Before you begin, please make sure that: You have a working internet connection OpenVPN Supported Router. A Premium PureVPN account (if you haven t bought it yet, click here to buy) In order to configure OpenVPN on pfsense, first download the required OpenVPN files from here and extract them. 1. After accessing your pfsense account, look for Cert Manager under System. 2.To add a new certificate click +. 1 / 10

2 3. Input the following information: Under descriptive name, enter CA Cert. After downloading the necessary OpenVPN files, copy its content from Open CA.crt and paste it in Certificate Data. From the downloaded OpenVPN files, access Open WDC.key, copy its content and paste it in Certificate Private Key and click on save. However, this step is optional. 4. Select the Certificates tab and then click +. 2 / 10

3 5. Input the following information: Under descriptive name, enter Client Cert. After downloading the necessary OpenVPN files, copy its content from Open Client.crt and paste it in Certificate Data. From the downloaded OpenVPN files, access Open Client.key, copy its content and paste it in Private Key Data and click save. 6. Select VPN and then select OpenVPN. 3 / 10

4 7. Select the Clients tab and then click Input the following information: Peer-to-Peer (SSL/TLS) under Server Mode UDP or TCP under Protocol Tun under Device Mode WAN under Interface Enter server address provided in open.ovpn from the OpenVPN files downloaded previously under Server Host Depending on the protocol previously selected, 80 for TCP or 53 for UDP, select appropriate port number for Server Port Avoid configuring or changing any other options. 4 / 10

5 9. Under User Authentication Settings enter your PureVPN username and password. 10. Under Cryptographic Settings select the following options: Authentication of TLS Packets needs to be ENABLED. Automatically Generate a TLS Authentication Key needs to be DISABLED. Access Open WDC.key again, copy and paste its content in the next box that pops up. PureVPN Cert needs to be selected under Peer Certificate. Client Cert needs to be selected under Client Certificate. Encryption Algorithm needs to be set to AES-256-CBC. Hardware Crypto needs to be set to No Hardware Crypto Acceleration. 5 / 10

6 11. Under Tunnel Settings compression needs to be changed to ENABLED. 12. Click on the save button located at the bottom of the page. 13. Access NAT under Firewall 14. Select Outbound and then click on Manual Outbound NAT Rule Generation and set it to Advanced Outbound NAT (AON). Click save and then apply changes. 6 / 10

7 15. As can be seen in the image below, you will be presented with a mapping window. Each WAN perimeter within needs to be changed to OpenVPN. This can be done after clicking on the edit button. 16. Interface needs to be changed to OpenVPN. Click on save and apply changes. 7 / 10

8 17. Steps 15 and 16 need to be repeated across the board for all interfaces to OpenVPN, After which the mapping window will look something like the image below. 18. Click Services under Status. 8 / 10

9 19. To access OpenVPN Client, click log entries. 20. Once initialization is complete for the logs, it confirms connection. 9 / 10

10 Note: If there is a TLS handshake error within the logs, change the protocol from UDP to TCP or the other way around and then reconnect again. Also, change port and server address while doing so. You have successfully setup PureVPN s OpenVPN on pfsense (2.3.2). But if you are having problems doing so, feel free to leave a comment below or speak to one of our representatives via Live Chat. 10 / 10 Powered by TCPDF (