Security, Internet Access, and Communication Ports

Size: px

Start display at page:

Download "Security, Internet Access, and Communication Ports"

Dominick Fowler
6 years ago
Views:

Security, Internet Access, and Communication Ports The following topics provide information on system security, internet access, and communication ports: About Security, Internet Access, and

1 Security, Internet Access, and Communication Ports The following topics provide information on system security, internet access, and communication ports: About Security, Internet Access, and Communication Ports, page 1 Internet Access Requirements, page 1 Communication Ports Requirements, page 3 About Security, Internet Access, and Communication Ports To safeguard thefirepower, you should install it on a protected internal network. Although the Firepower is configured to have only the necessary services and ports available, you must make sure that attacks cannot reach it (or any managed devices) from outside the firewall. If the Firepower and its managed devices reside on the same network, you can connect the management interfaces on the devices to the same protected internal network as the Firepower Management Center. This allows you to securely control the devices from the Firepower. You can also configure multiple management interfaces to allow the Firepower to manage and isolate traffic from devices on other networks. Regardless of how you deploy your appliances, intra-appliance communication is encrypted. However, you must still take steps to ensure that communications between appliances cannot be interrupted, blocked, or tampered with; for example, with a distributed denial of service (DDoS) or man-in-the-middle attack. Also note that specific features require an internet connection. By default, Firepower appliances are configured to directly connect to the internet. Additionally, certain ports must remain open for basic intra-appliance communication, for secure appliance access, and so that specific features can access the local or internet resources they need to operate correctly. Internet Access Requirements By default, system appliances are configured to directly connect to the Internet on ports 443/tcp (HTTPS) and 80/tcp (HTTP), which are open by default on all Firepower System appliances Note that most system appliances support use of a proxy server. Note also that a proxy server cannot be used for whois access. Firepower Configuration Guide, Version 6.0 1

2 Firepower System Feature Internet Access Requirements Security, Internet Access, and Communication Ports Firepower System Feature Internet Access Requirements The following table describes the Internet access requirements of specific features of the Firepower System. Table 1: Firepower System Feature Internet Access Requirements Feature AMP for Networks Internet access is required to... perform malware cloud lookups. Appliances Cisco Advanced Malware Protection (Cisco AMP) integration receive endpoint-based (AMP for Endpoints) malware events from the Cisco AMP cloud. dynamic analysis: querying dynamic analysis: submitting intrusion rule, VDB, and GeoDB updates local malware analysis and file preclassification signature updates RSS feed dashboard widget Security Intelligence filtering system software updates URL filtering whois query the AMP Threat Grid cloud for threat scores of files previously submitted for dynamic analysis. submit files to the AMP Threat Grid cloud for dynamic analysis. download or schedule the download of a intrusion rule, GeoDB, or VDB update directly to an appliance. download signature updates to the local malware analysis and preclassification engines. download RSS feed data from an external source, including Cisco. download Security Intelligence feed data from an external source, including Cisco-provided intelligence feeds. download or schedule the download of a system update directly to an appliance. download URL category and reputation data for access control, and query for uncategorized URLs. request whois information for an external host. device except NGIPSv 2 Firepower Configuration Guide, Version 6.0

3 Security, Internet Access, and Communication Ports Communication Ports Requirements Communication Ports Requirements Firepower appliances communicate using a two-way, SSL-encrypted communication channel, which by default uses port 8305/tcp. This port must remain open for basic intra-platform communication. Other open ports allow: Access to the web interface ( Firepower and ). Secure remote connections. Access to local or internet resources required by specific features. Do not close an open port until you understand how this action will affect your deployment. In general, feature-related ports remain closed until you enable or configure the associated feature. Note that the system allows you to change some of its communication ports: You can specify custom ports for LDAP and RADIUS authentication when you configure a connection between the system and the authentication server. You can change the management port (8305/tcp). However, Cisco strongly recommends that you keep the default setting. If you change the management port, you must change it for all appliances in the deployment. You can use port 32137/tcp to communicate with the Cisco AMP cloud. However, Cisco recommends you use the default of port 443. Default Communication Ports for Firepower System Features and Operations The following table lists the open ports required by each appliance type so that you can take full advantage of Firepower System features. Table 2: Default Communication Ports for Firepower System Features and Operations Port Description Direction Is Open on... To... 22/tcp SSH/SSL allow a secure remote connection to the appliance. 25/tcp SMTP send notices and alerts from the appliance. 53/tcp DNS use DNS. 67/udp DHCP use DHCP. Note that these ports are closed by default. 68/udp 80/tcp HTTP, allow the RSS Feed dashboard widget to connect to a remote web server. Firepower Configuration Guide, Version 6.0 3

4 Default Communication Ports for Firepower System Features and Operations Security, Internet Access, and Communication Ports Port Description Direction Is Open on... To... update custom and third-party Security Intelligence feeds via HTTP. download URL category and reputation data (port 443 also required). 161/udp SNMP allow access to an appliance s MIBs via SNMP polling. 162/udp SNMP send SNMP alerts to a remote trap server. 389/tcp 636/tcp LDAP except NGIPSv communicate with an LDAP server for external authentication. 389/tcp LDAP obtain metadata for detected LDAP users. 636/tcp 443/tcp HTTPS Inbound except NGIPSv access an appliance s web interface. 443/tcp HTTPS obtain: AMQP AMP cloud, AMP Threat Grid cloud, and Threat Intelligence Communication Preferences software, intrusion rule, VDB, and GeoDB updates URL category and reputation data (port 80 also required) the Intelligence Feed and other secure Security Intelligence feeds endpoint-based (AMP for Endpoints) malware events malware dispositions for files detected in network traffic dynamic analysis information on submitted files, download software updates using the device s local web interface. managed device submit files for dynamic analysis. 514/udp syslog send alerts to a remote syslog server. 623/udp SOL/LOM allow you to perform Lights-Out Management using a Serial Over LAN (SOL) connection. 1500/tcp 2000/tcp database access Inbound allow read-only access to the database by a third-party client. 1812/udp 1813/udp RADIUS except NGIPSv communicate with a RADIUS server for external authentication and accounting. 4 Firepower Configuration Guide, Version 6.0

5 Security, Internet Access, and Communication Ports Default Communication Ports for Firepower System Features and Operations Port Description Direction Is Open on... To /tcp User Agent Inbound communicate with User Agents. 8302/tcp estreamer communicate with an estreamer client., 8305/tcp appliance comms. securely communicate between appliances in a deployment. Required. 8307/tcp host input client communicate with a host input client /tcp AMP cloud and Threat Intelligence Communication Preferences allow upgraded s to communicate with the Cisco AMP cloud. Firepower Configuration Guide, Version 6.0 5

6 Default Communication Ports for Firepower System Features and Operations Security, Internet Access, and Communication Ports 6 Firepower Configuration Guide, Version 6.0

Security, Internet Access, and Communication Ports

Security, Internet Access, and Communication Ports The following topics provide information on system security, internet access, and communication ports: Security Requirements Security Requirements, on