User Inputs for Installation

Size: px
Start display at page:

Download "User Inputs for Installation"

Transcription

1 APPENDIXA This appendix provides information on the user inputs during LMS 4.1 installation. Note For information on the Installation of LMS 4.1, see Performing Installation of LMS 4.1. This appendix contains: User Inputs for Typical Installation User Inputs for Custom Installation Password Information A-1

2 User Inputs for Typical Installation Appendix A User Inputs for Typical Installation Enter the following information while installing for the first time in Typical mode: Table A-1 User Inputs for New Installation: Typical Settings Password for admin user (Windows and Solaris) Password for sysadmin user (Soft Appliance) Password for System Identity Account Value No default values. Enter the admin password. For more information on passwords, see Password Information. No default values. Enter the sysadmin password. For more information on passwords, see Password Information. No default values. Enter the System Identity Account password. For more information on passwords, see Password Information. Enter the following information while reinstalling in Typical mode: Table A-2 Settings Backup folder User Inputs for Reinstallation: Typical Value Enter a folder for the backup data. You can also browse and select a folder. User Inputs for Custom Installation This section contains: User Inputs for New Installation (Custom) User Inputs for Reinstallation (Custom) User Inputs for New Installation (Custom) Enter the following information while installing for the first time in Custom mode: Table A-3 User Inputs for a New Installation: Custom Settings Destination folder Password for users admin and guest (Mandatory) Value The default location is System drive:\program Files\CSCOpx. Select another location if you want to install in a specific location. We recommend that you specify a short path for the destination folder. No default values. Enter the admin and guest password. For more information on passwords, see Password Information. A-2

3 Appendix A User Inputs for Custom Installation Table A-3 User Inputs for a New Installation: Custom (continued) Settings Password for System Identity Account Password for user casuser This is for Windows only. Password for the Common Services database. (Mandatory) Web server settings: (Mandatory) HTTPS port Administrator s address SMTP server name Data for the Self-signed Certificate: Country Code State City Organization Name Organization Unit Name Host name Address Value No default values. Enter the system identity account password. For more information on passwords, see Password Information. The password is generated randomly if you leave the field blank. Enter the database password. For more information on passwords, see Password Information. The default values are: Port number 443. See Important Note for Configuring Port Numbers for more information. yourusername@example.com localhost By default, the self-signed certificate is generated using the organization that Windows is registered to, and the host name. You must enter the host name. You can leave the other fields blank. Important Note for Configuring Port Numbers On a Windows system, if you are using HPOV as your third party NMS application, you would require the IIS service to be enabled for HPOV to install and run. The IIS web server runs on SSL port 443, which is the default port for the LMS web server when installing LMS. To avoid a conflict, you should change the SSL port number of the LMS web server from 443 to another port that is available, and that has a number in the range 1026 to 65535, except Port number 6000 is reserved by Firefox, if you enter 6000 as the SSL port number, after installation (for all the three operating systems), you will not be able to launch LMS using the Firefox browser. A-3

4 User Inputs for Custom Installation Appendix A User Inputs for Reinstallation (Custom) Enter the following information while reinstalling in Custom mode: Table A-4 User Inputs for Reinstallation: Custom Settings Backup folder Destination folder Password for users admin and guest Password for system identity account (Mandatory) Password for user casuser Password for the Common Services Database Web server settings: HTTPS port Administrator s address SMTP server name Data for the Self-signed Certificate: (Mandatory) Country Code State City Organization Name Organization Unit Name Hostname Address Value Enter a folder for the backup data. You can also browse and select a folder. The default location is System drive:\program Files\CSCOpx. We recommend that you specify a short path for the destination folder. You may change the passwords for the admin and guest users. To keep the existing passwords, leave the fields blank. You may change the passwords for the system identity account. To keep the existing passwords, leave the fields blank. If you do not enter a password, the setup program will generate a random password for you. If casuser does not exist, it will be created. Leave the fields blank to retain the existing password. You can choose to keep the existing information. By default, the self-signed certificate is generated using the organization that Windows is registered to, and the host name. You must enter the host name. You can leave the other fields blank. A-4

5 Appendix A Password Information Password Information This appendix provides information on the usage of passwords during installation. It contains: Password Rules for New Installation Password Rules for Re-installation Password Descriptions Password Rules for New Installation The following rules apply for a new installation: In Typical mode, admin and System Identity Account passwords are mandatory. Installation program generates guest, casuser, and database passwords randomly. In Custom mode, admin, guest, System Identity Account, and database passwords are mandatory. You can either enter the casuser password or allow the installation program to randomly generate it. Password Rules for Re-installation The following rules apply for re-installation: In Typical mode, the installation program retains passwords for admin, casuser, guest, and database. In Custom mode, you can chose to enter new admin, guest, system identity account, and database passwords or retain the existing passwords. You can either enter the casuser password or allow the installation program to randomly generate it. Password Descriptions The types of passwords are as follows: LMS Admin Password System Identity Account Password LMS Guest Password LMS Application Database Password Changing LMS Admin Password Changing casuser Password A-5

6 Password Information Appendix A LMS Admin Password While entering the LMS Admin passwords, use a minimum of five characters. System Identity Account Password LMS Guest Password While entering the System Identity Account Passwords, use a minimum of five characters. In a multi-server environment, you must configure all systems part of your multiserver setup with the same System Identity Account password. To add a System Identity user select Admin > Trust Management > Multi Server > System Identity Setup. See the section Setting up System Identity Account in the User Guide for Administration of Cisco Prime LAN Management Solution 4.1 for more details on System Identity Account. While entering LMS Guest passwords, use a minimum of five characters. LMS Application Database Password Changing LMS Admin Password While entering LMS Application Database passwords: Use a minimum of five characters and a maximum of 15 characters. Do not start the password with a number. Do not insert spaces between characters. Do not use any special characters. You can change your LMS Admin password by using either the LMS user password recovery utility or from the GUI, if you want to change it. Changing Admin Password Using Password Recovery Utility Changing Admin Password From GUI A-6

7 Appendix A Password Information Changing Admin Password Using Password Recovery Utility You can change the LMS user password using the LMS user password recovery utility. To change the user password on Solaris: Step 1 Step 2 Step 3 Set the LD_LIBRARY_PATH manually. The path is to be set as follows: setenv LD_LIBRARY_PATH /opt/cscopx/mdc/lib:/opt/cscopx/lib This environment variable set is applicable to the current working shell only. Now, you can change the password using the LMS user password recovery utility. Enter NMSROOT/bin/ResetPasswd.pl username at the command prompt. Here NMSROOT refers to the LMS Installation directory. A message appears: Enter new password for username: Enter the new password. To change the user password on Windows: Step 1 Step 2 Enter NMSROOT\bin\ResetPasswd.pl username at the command prompt. A message appears: Enter new password for username: Enter the new password. To change the user password on Soft Appliance: Step 1 Step 2 Enter NMSROOT/bin/ResetPasswd.pl username at the command prompt. Here NMSROOT refers to the LMS Installation directory. A message appears: Enter new password for username: Enter the new password. Changing Admin Password From GUI To change the LMS admin password from the LMS server: Step 1 Step 2 Step 3 Login as admin user. Select Admin > System > User Management > Local User Setup. The Local User Setup page appears. Click Modify My Profile. A-7

8 Password Information Appendix A Step 4 Step 5 Step 6 Step 7 The My Profile pop-up window appears. Enter the password in the Password field. Re-enter the password in the Verify field. Enter the ID in the field. Click OK. A-8

9 Appendix A Password Information Changing casuser Password You can change the casuser password using resetcasuser.exe. To change the casuser password, do the following: Step 1 Step 2 Step 3 At the command prompt, enter: NMSROOT\setup\support\resetCasuser.exe Three options are displayed: 1. Randomly generate the password 2. Enter the password 3. Exit. Enter 2, and press Enter. A message appears, prompting you to enter the password. Confirm the password. You must know the password policy. If you enter a password that does not match the password policy, the application exits with an error message. A-9

10 Password Information Appendix A A-10

User Inputs for Installation, Reinstallation, and Upgrade

User Inputs for Installation, Reinstallation, and Upgrade APPENDIXA User Inputs for Installation, Reinstallation, and Upgrade This appendix provides information on the user inputs during Service Monitor installation, reinstallation, and upgrade. This appendix

More information

User Input for Installation and Reinstallation

User Input for Installation and Reinstallation APPENDIX A This appendix provides information on user input for Operations Manager installation, reinstallation, and silent installation. This appendix contains: User Input for a Typical Installation,

More information

Licensing the Application CHAPTER

Licensing the Application CHAPTER CHAPTER 5 Licensing Application, Configuring E-mail, Cisco.com, Proxy Settings, RCP, SCP Settings, Security, Backup, Authentication Settings and Idle Timeout Settings, Browser and Server Security Mode

More information

User guide NotifySCM Installer

User guide NotifySCM Installer User guide NotifySCM Installer TABLE OF CONTENTS 1 Overview... 3 2 Office 365 Users synchronization... 3 3 Installation... 5 4 Starting the server... 17 2 P a g e 1 OVERVIEW This user guide provides instruction

More information

Backup using Quantum vmpro with Symantec Backup Exec release 2012

Backup using Quantum vmpro with Symantec Backup Exec release 2012 Backup using Quantum vmpro with Symantec Backup Exec release 2012 Step 1) If the vmpro appliance name and IP address are not resolved through DNS, update the Windows hosts file to include the IP address

More information

CLI users are not listed on the Cisco Prime Collaboration User Management page.

CLI users are not listed on the Cisco Prime Collaboration User Management page. Cisco Prime Collaboration supports creation of user roles. A user can be assigned the Super Administrator role. A Super Administrator can perform tasks that both system administrator and network administrator

More information

Upgrading Software and Firmware

Upgrading Software and Firmware APPENDIXB This appendix describes how to upgrade or reinstall the Cisco PAM server software, desktop client software, and Gateway module firmware. Contents Upgrade Notes for Release 1.1.0, page B-2 Upgrading

More information

Using Integration Utility

Using Integration Utility CHAPTER 3 CiscoWorks Integration Utility downloads Network Management Integration Data Bundle (NMIDB) and integrates LAN Management Solutions (LMS) applications, icons, MIBs, and traps with third-party

More information

Getting Started Using Cisco License Manager

Getting Started Using Cisco License Manager CHAPTER 5 This chapter provides information about the initial setup of Cisco License Manager and an overview of recommended steps to quickly add users and devices and obtain and deploy licenses. This chapter

More information

Deploying Cisco UCS Central

Deploying Cisco UCS Central This chapter includes the following sections: Obtaining the Cisco UCS Central Software from Cisco, page 1 Using the Cisco UCS Central OVA File, page 2 Using the Cisco UCS Central ISO File, page 4 Logging

More information

3.1 Getting Software and Certificates

3.1 Getting Software and Certificates 3 Configuring the Remote Client On the remote client you have to download the Sophos SSL VPN Client software including configuration data from the UTM User Portal. Then you install the software package

More information

System Setup. Accessing the Administration Interface CHAPTER

System Setup. Accessing the Administration Interface CHAPTER CHAPTER 3 The system can be configured through the web interface to provide the networking configuration for the appliance and other system settings that are important such as time and SSL certificate.

More information

XenMobile 10 Cluster installation. Here is the task that would be completed in order to implement a XenMobile 10 Cluster.

XenMobile 10 Cluster installation. Here is the task that would be completed in order to implement a XenMobile 10 Cluster. XenMobile 10 Cluster installation Here is the task that would be completed in order to implement a XenMobile 10 Cluster. For this example, running on my lab, I am using XenServer 6.5 SP1 as hypervisor

More information

VII. Corente Services SSL Client

VII. Corente Services SSL Client VII. Corente Services SSL Client Corente Release 9.1 Manual 9.1.1 Copyright 2014, Oracle and/or its affiliates. All rights reserved. Table of Contents Preface... 5 I. Introduction... 6 Chapter 1. Requirements...

More information

Media Writer. Installation Guide LX-DOC-MW5.1.9-IN-EN-REVB. Version 5.1.9

Media Writer. Installation Guide LX-DOC-MW5.1.9-IN-EN-REVB. Version 5.1.9 Media Writer Installation Guide Version 5.1.9 Regulations and Compliance Tel: 1-844-535-1404 Email: TS_PACSGEAR@hyland.com 2018 Hyland. Hyland and the Hyland logo are trademarks of Hyland LLC, registered

More information

Install and Configure FindIT Network Manager and FindIT Network Probe on Microsoft Hyper-V Manager

Install and Configure FindIT Network Manager and FindIT Network Probe on Microsoft Hyper-V Manager Install and Configure FindIT Network Manager and FindIT Network Probe on Microsoft Hyper-V Manager Objective The Cisco FindIT Network Management provides tools that help you easily monitor, manage, and

More information

Integrating Cisco Unified MeetingPlace Express With Microsoft Outlook

Integrating Cisco Unified MeetingPlace Express With Microsoft Outlook APPENDIX B Integrating Cisco Unified MeetingPlace Express With Microsoft Outlook Revised: October 18, 2006, Topics in this section include: Restrictions for Microsoft Outlook Integration, page B-1 Information

More information

Installation Guide. Mobile Print for Business version 1.0. July 2014 Issue 1.0

Installation Guide. Mobile Print for Business version 1.0. July 2014 Issue 1.0 Installation Guide Mobile Print for Business version 1.0 July 2014 Issue 1.0 Fuji Xerox Australia 101 Waterloo Road North Ryde NSW 2113 For technical queries please contact the Fuji Xerox Australia Customer

More information

Reset the Admin Password with the ExtraHop Rescue CD

Reset the Admin Password with the ExtraHop Rescue CD Reset the Admin Password with the ExtraHop Rescue CD Published: 2018-01-19 This guide explains how to reset the administration password on physical and virtual ExtraHop appliances with the ExtraHop Rescue

More information

How to Configure Guest Access with the Ticketing System

How to Configure Guest Access with the Ticketing System How to Configure Guest Access with the Ticketing System Set up a login or ticketing system to temporarily grant access to guest users. Ticketing admins assign guest tickets to the users. The user credentials

More information

Software Installation Manual

Software Installation Manual Software Installation Manual Page 1 of 5 Hardware Requirements The ProxnetPro application is installed on a single, dedicated* Host PC, that will then provide Web Server access to any number of connected

More information

NCM and LMS Co-residency Installation

NCM and LMS Co-residency Installation 2 CHAPTER This chapter describes the CiscoWorks NCM and LMS co-residency installation procedures on a Windows server and includes the following sections: Co-residency Installation Summary, page 2-1 Detailed

More information

Configuring the SMA 500v Virtual Appliance

Configuring the SMA 500v Virtual Appliance Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance

More information

Minimum requirements for Portal (on-premise version):

Minimum requirements for Portal (on-premise version): Minimum requirements for Portal (on-premise version): Windows Server 2012 R2 Windows 10 (licensed) with the latest updates (64 bit only). All Windows applications must be licensed and activated. SQL Server

More information

New World ERP-eSuite

New World ERP-eSuite New World ERP-eSuite 2018.1 INSTALLATION GUIDE April 9, 2018 Review important information for installing this release: SSL is required for esuite Services and Website servers. 2018 Tyler Technologies.

More information

UDP Director Virtual Edition Installation and Configuration Guide (for Stealthwatch System v6.9.0)

UDP Director Virtual Edition Installation and Configuration Guide (for Stealthwatch System v6.9.0) UDP Director Virtual Edition Installation and Configuration Guide (for Stealthwatch System v6.9.0) Installation and Configuration Guide: UDP Director VE v6.9.0 2016 Cisco Systems, Inc. All rights reserved.

More information

Click Studios. Passwordstate. Remote Session Launcher. Installation Instructions

Click Studios. Passwordstate. Remote Session Launcher. Installation Instructions Passwordstate Remote Session Launcher Installation Instructions This document and the information controlled therein is the property of Click Studios. It must not be reproduced in whole/part, or otherwise

More information

Setting Up the Server

Setting Up the Server Managing Licenses, page 1 Cross-launch from Prime Collaboration Provisioning, page 5 Integrating Prime Collaboration Servers, page 6 Single Sign-On for Prime Collaboration, page 7 Changing the SSL Port,

More information

Cisco Unified Serviceability

Cisco Unified Serviceability Cisco Unified Serviceability Introduction, page 1 Installation, page 5 Introduction This document uses the following abbreviations to identify administration differences for these Cisco products: Unified

More information

Smart Call Home Quick Start Configuration Guide

Smart Call Home Quick Start Configuration Guide Smart Call Home Quick Start Configuration Guide Smart Call Home offers proactive diagnostics and real-time alerts on click Cisco devices, which provides higher network availability and increased operational

More information

Managing User Roles and Users in LMS

Managing User Roles and Users in LMS 7 CHAPTER This chapter explains the following: Managing Roles Managing Users Managing Roles A role is a collection of privileges that dictate the type of system access you have. The Manage User Roles workflow

More information

Windows Backup Server Installation

Windows Backup Server Installation Windows Backup Server Installation VEMBU TECHNOLOGIES www.vembu.com TRUSTED BY OVER 60,000 BUSINESSES Windows Backup Server Installation Vembu BDR Server is currently supported for below versions of Windows

More information

Persistent Data Transfer Procedure

Persistent Data Transfer Procedure This chapter describes exporting and importing Cisco Secure ACS, Release 5.5 or 5.6 data into Cisco ISE, Release 1.4 system using the migration tool. Exporting Data from Cisco Secure ACS, page 1 Analyzing

More information

ConnectUPS-X / -BD /-E How to use and install SSL, SSH

ConnectUPS-X / -BD /-E How to use and install SSL, SSH ConnectUPS-X /-BD /-E product family Root CA Certificate installation Rev. B Page 1/16 Index 1. How to use and install SSL (Secure Socket Layer)...3 1.1. General Certificate warning message if not installed...3

More information

Smart Call Home Deploying thetransport Gateway on Cisco Unified Computing System and Red Hat Linux

Smart Call Home Deploying thetransport Gateway on Cisco Unified Computing System and Red Hat Linux Deployment Guide Smart Call Home Deploying thetransport Gateway on Cisco Unified Computing System and Red Hat Linux Deployment Guide For further information, questions and comments please contact ask-smart-services@cisco.com

More information

Upgrading the Server Software

Upgrading the Server Software APPENDIXB This appendix describes how to upgrade or reinstall the Cisco PAM server software, desktop client software, and Gateway module firmware. Contents Upgrade Notes for Release 1.5.0, page B-2 Obtaining

More information

Using Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS)

Using Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) CHAPTER 2 Using Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) This chapter contains information on the following topics: HTTPS Overview, page 2-1 HTTPS for Cisco Unified IP Phone Services,

More information

ZENworks Mobile Workspace Installation Guide. September 2017

ZENworks Mobile Workspace Installation Guide. September 2017 ZENworks Mobile Workspace Installation Guide September 2017 Legal Notice For information about legal notices, trademarks, disclaimers, warranties, export and other use restrictions, U.S. Government rights,

More information

Table of Contents 1 V3 & V4 Appliance Quick Start V4 Appliance Reference...3

Table of Contents 1 V3 & V4 Appliance Quick Start V4 Appliance Reference...3 Table of Contents 1 V & V4 Appliance Quick Start...1 1.1 Quick Start...1 1.2 Accessing Appliance Menus...1 1. Updating Appliance...1 1.4 Webmin...1 1.5 Setting Hostname IP Address...2 1.6 Starting and

More information

BROWSER-BASED SUPPORT CONSOLE USER S GUIDE. 31 January 2017

BROWSER-BASED SUPPORT CONSOLE USER S GUIDE. 31 January 2017 BROWSER-BASED SUPPORT CONSOLE USER S GUIDE 31 January 2017 Contents 1 Introduction... 2 2 Netop Host Configuration... 2 2.1 Connecting through HTTPS using Certificates... 3 2.1.1 Self-signed certificate...

More information

Installation. Power on and initial setup. Before You Begin. Procedure

Installation. Power on and initial setup. Before You Begin. Procedure Power on and initial setup, page 1 Customize ESXi host for remote access, page 4 Access and configure ESXi host, page 6 Deploy virtual machines, page 13 Install applications on virtual machines, page 14

More information

Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS)

Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS) This chapter provides information about Hypertext Transfer Protocol over Secure Sockets Layer. HTTPS, page 1 HTTPS for Cisco Unified IP Phone

More information

IceWarp SSL Certificate Process

IceWarp SSL Certificate Process IceWarp Unified Communications IceWarp SSL Certificate Process Version 12 Printed on 20 April, 2017 Contents IceWarp SSL Certificate Process 1 Choosing the Proper Certificate Type... 2 Creating your CSR

More information

Installing Cisco MSE in a VMware Virtual Machine

Installing Cisco MSE in a VMware Virtual Machine Installing Cisco MSE in a VMware Virtual Machine This chapter describes how to install and deploy a Cisco Mobility Services Engine (MSE) virtual appliance. Cisco MSE is a prebuilt software solution that

More information

goremote.carolinas.org

goremote.carolinas.org Detailed instructions for goremote.carolinas.org Section 1. Registering your account in the goremote portal To setup your access to goremote.carolinas.org, please follow these steps: Open a browser window

More information

Inventory Reports. Detailed Device Report CHAPTER

Inventory Reports. Detailed Device Report CHAPTER CHAPTER 2 include the following device reports. Detailed Device Report Device Attributes Reports Generating a 24-Hour Inventory Change Report Hardware Reports Management Status Reports Software Reports

More information

Using the Web-Browser and CLI Interfaces

Using the Web-Browser and CLI Interfaces CHAPTER 2 This chapter describes the web-browser and CLI interfaces that you use to configure the controller. It contains these sections: Using the Web-Browser Interface, page 2-2 Using the CLI, page 2-7

More information

CLI users are not listed on the Cisco Prime Collaboration User Management page.

CLI users are not listed on the Cisco Prime Collaboration User Management page. Cisco Prime Collaboration supports creation of user roles. A user can be assigned the Super Administrator role. A Super Administrator can perform tasks that both system administrator and network administrator

More information

Administration of Cisco WLC

Administration of Cisco WLC Using the Controller Interface, on page 1 Enabling Web and Secure Web Modes, on page 6 Telnet and Secure Shell Sessions, on page 8 Management over Wireless, on page 13 Configuring Management using Dynamic

More information

Symantec Endpoint Protection Installation Guide

Symantec Endpoint Protection Installation Guide Symantec Endpoint Protection 11.0 Installation Guide SYMANTEC ENDPOINT PROTECTION 11.0 TABLE OF CONTENTS A NEW SECURITY APPLICATION... 1 INTRODUCTION... 1 WHAT IS SYMANTEC ENDPOINT PROTECTION (SEP) 11.0?...

More information

Xerox WorkCentre 6655 Software Installation Instructions

Xerox WorkCentre 6655 Software Installation Instructions Xerox WorkCentre 6655 Software Installation Instructions Upgrading Software for Xerox ConnectKey Technology A new firmware update containing the latest improvements is available for your ConnectKey-enabled

More information

Use a class C setting for maximum security. The class C setting is Click RoomWizard Setup.

Use a class C setting for maximum security. The class C setting is Click RoomWizard Setup. Use a class C setting for maximum security. The class C setting is 255.255.255.0. 2 Click RoomWizard Setup. The Default Gateway is the IP address of the router or gateway that provides internet access.

More information

Xplornet using Mozilla Thunderbird 52

Xplornet  using Mozilla Thunderbird 52 Xplornet Email using Mozilla Thunderbird 52 Adding a new email account 1. Click File, New, Existing Mail Account a. If you don t see the menu bar across the top in the Windows version, click on the Application

More information

Frequently Asked Questions

Frequently Asked Questions APPENDIXB The following section lists the (FAQs) of Inventory Management in LMS 4.0: Device Discovery FAQ Device Management FAQ Device Discovery FAQ : The following are the FAQs on Device Management: Does

More information

Unity Connection Version 10.5 SAML SSO Configuration Example

Unity Connection Version 10.5 SAML SSO Configuration Example Unity Connection Version 10.5 SAML SSO Configuration Example Document ID: 118772 Contributed by A.M.Mahesh Babu, Cisco TAC Engineer. Jan 21, 2015 Contents Introduction Prerequisites Requirements Network

More information

Oracle Collaboration Suite

Oracle Collaboration Suite Oracle Collaboration Suite Quick Installation Guide Release 2 (9.0.4.1) for hp-ux PA-RISC (64-bit), Linux x86, and Solaris Operating Environment (SPARC 32-bit) September 2003 Part No. B10885-02 This document

More information

2 Initial Setup with Web Wizard

2 Initial Setup with Web Wizard 2 Initial Setup with Web Wizard Libra ESVA is configured to respond to the IP 192.168.1.1. If this address conflicts with another on your network or if you have a different subnet, it is possible to change

More information

This chapter describes the tasks that you perform after installing Prime Cable Provisioning.

This chapter describes the tasks that you perform after installing Prime Cable Provisioning. This chapter describes the tasks that you perform after installing Prime Cable Provisioning. Licensing Prime Cable Provisioning, page 1 Cisco Prime Network Registrar Configurations, page 5 Setting Up a

More information

QUICK START FOR SELF HOSTED, SELF INSTALLED

QUICK START FOR SELF HOSTED, SELF INSTALLED QUICK START FOR SELF HOSTED, SELF INSTALLED copyright 2017 www.accordlms.com Table of Contents Module Setup... 3 About this Guide... 4 System Requirements... 5 Module Installation... 6 Add LMS Administration

More information

UDP Director Virtual Edition

UDP Director Virtual Edition UDP Director Virtual Edition (also known as FlowReplicator VE) Installation and Configuration Guide (for StealthWatch System v6.7.0) Installation and Configuration Guide: UDP Director VE v6.7.0 2015 Lancope,

More information

PROFITstar, PROFITability, Profitstar Suite, and PROFITstar Portfolio. Release 2016a. Installation Guide

PROFITstar, PROFITability, Profitstar Suite, and PROFITstar Portfolio. Release 2016a. Installation Guide PROFITstar, PROFITability, Profitstar Suite, and PROFITstar Portfolio Installation Guide Summary... 1 Important Considerations... 1 System Requirements... 1 Microsoft SQL Server Prerequisites... 2 SQL

More information

Hypertext Transfer Protocol Over Secure Sockets Layer (HTTPS)

Hypertext Transfer Protocol Over Secure Sockets Layer (HTTPS) Hypertext Transfer Protocol Over Secure Sockets Layer (HTTPS) This chapter provides information about Hypertext Transfer Protocol over Secure Sockets Layer. HTTPS, page 1 HTTPS for Cisco Unified IP Phone

More information

Business Connect Secure Remote Access Service (SRAS) Customer Information Package

Business Connect Secure Remote Access Service (SRAS) Customer Information Package Business Connect Secure Remote Access Service (SRAS) Customer Information Package Table of Contents 1.0 Introduction... 1 1.1 Overview... 1 1.2 Scope and Audience... 1 1.3 Design Deliverables... 1 1.4

More information

Setting up Certificate Authentication for SonicWall SRA / SMA 100 Series

Setting up Certificate Authentication for SonicWall SRA / SMA 100 Series Setting up Certificate Authentication for SonicWall SRA / SMA 100 Series SonicWall SRA and SMA devices now have the option to authenticate using Client User Certificates. This is a guide on how to implement

More information

Upgrade Tool Guide. July

Upgrade Tool Guide. July Upgrade Tool Guide July 2015 http://www.liveaction.com 4.X to 5.0 The Upgrade Guide from 4.X to 5.0 consists of three parts: Upgrading the LiveAction Server Upgrading the LiveAction Node Upgrading the

More information

CHAPTER. Introduction

CHAPTER. Introduction CHAPTER 1 Cisco Unified Communications Manager (formerly Cisco Unified CallManager) serves as the software-based call-processing component of the Cisco Unified Communications family of products. A wide

More information

INSTALLATION GUIDE FOR ACPL FM220 RD WINDOWS APPLICATION INDEX

INSTALLATION GUIDE FOR ACPL FM220 RD WINDOWS APPLICATION INDEX INSTALLATION GUIDE FOR ACPL FM220 RD WINDOWS APPLICATION INDEX CONTENT PAGE No. Setup FM220 RD Service 2 Setup FM220 RD Service Support Tool 5 Instructions to enable HTTPS in RD Service 8 RD Service troubleshooting

More information

Cisco Prime Collaboration Deployment

Cisco Prime Collaboration Deployment Install System Requirements for Installation, page 1 Browser Requirements, page 2 IP Address Requirements, page 2 Virtualization Software License Types, page 3 Frequently Asked Questions About the Installation,

More information

BACKUP APP V7 QUICK START GUIDE FOR SYNOLOGY NAS

BACKUP APP V7 QUICK START GUIDE FOR SYNOLOGY NAS BACKUP APP V7 QUICK START GUIDE FOR SYNOLOGY NAS Revision History Date Descriptions Type of modification 29 Jun 2016 First Draft New 25 Nov 2016 Modified Ch 3 Download Backup App, Ch 3 Install Backup App

More information

Plus-X I/O Units. Manual Supplement Configuring Units with and without DHCP

Plus-X I/O Units. Manual Supplement Configuring Units with and without DHCP Plus-X I/O Units Manual Supplement Configuring Units with and without DHCP Table of Contents Introduction... 1 Initial Connection Using DHCP... 1 Initial Connection Without DHCP... 2 Set a Static IP Address...

More information

Symantec NetBackup Appliances Hands-On Lab

Symantec NetBackup Appliances Hands-On Lab Symantec NetBackup Appliances Hands-On Lab Description NetBackup Appliances Hands On Lab This lab assumes a prerequisite knowledge of NetBackup, specifically configuring storage units, creating backup

More information

Cisco s AnyConnect VPN Client (version 2.4)

Cisco s AnyConnect VPN Client (version 2.4) Table of Contents [TOC]: Introduction Getting Started Installation Overview Using the Softphone System Requirements Introduction: Valley City State University is deploying Cisco s AnyConnect Virtual Private

More information

SETUP FOR OUTLOOK (Updated October, 2018)

SETUP FOR OUTLOOK (Updated October, 2018) EMAIL SETUP FOR OUTLOOK (Updated October, 2018) This tutorial will show you how to set up your email in Outlook using IMAP or POP. It also explains how to configure Outlook for MAC. Click on your version

More information

Get Started with Cisco DNA Center

Get Started with Cisco DNA Center About Cisco DNA Center, on page 1 Log In, on page 1 Default Home Page, on page 2 Use Search, on page 4 Where to Start, on page 5 About Cisco DNA Center Cisco Digital Network Architecture (DNA) offers centralized,

More information

User Tracking Utility

User Tracking Utility APPENDIXB CiscoWorks is a Windows desktop utility that provides quick access to useful information about users or hosts discovered by LMS. UTU comprises a server-side component and a client utility. To

More information

Storage Manager 2018 R1. Installation Guide

Storage Manager 2018 R1. Installation Guide Storage Manager 2018 R1 Installation Guide Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either

More information

LiveNX Upgrade Guide from v5.1.2 to v Windows

LiveNX Upgrade Guide from v5.1.2 to v Windows LIVEACTION, INC. LiveNX Upgrade Guide from v5.1.2 to v5.1.3 - Windows UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the

More information

Managing GSS Devices from the GUI

Managing GSS Devices from the GUI CHAPTER 1 This chapter describes how to configure and manage your Global Site Selector Manager (GSSM) and Global Site Selector (GSS) devices from the primary GSSM graphical user interface. It includes

More information

Policy Manager for IBM WebSphere DataPower 7.2: Configuration Guide

Policy Manager for IBM WebSphere DataPower 7.2: Configuration Guide Policy Manager for IBM WebSphere DataPower 7.2: Configuration Guide Policy Manager for IBM WebSphere DataPower Configuration Guide SOAPMDP_Config_7.2.0 Copyright Copyright 2015 SOA Software, Inc. All rights

More information

NTP Software File Auditor for Windows Edition

NTP Software File Auditor for Windows Edition NTP Software File Auditor for Windows Edition An NTP Software Installation Guide Abstract This guide provides a short introduction to installation and initial configuration of NTP Software File Auditor

More information

User Communication Citrix SecureAuth

User Communication Citrix SecureAuth Prerequisites 1 *Non-Newmont PC ONLY* If you are using any PC except your Newmont issued system, you must follow this step if you are using your Newmont issued system you can move to First Time Enrollment

More information

PACSgear Core Server

PACSgear Core Server PACSgear Core Server Installation and Setup Guide LX-DOC-PCS4.0.0-IN-EN-REVA Version 4.0.0 Regulations and Compliance Tel: 1-844-535-1404 Email: TS_PACSGEAR@hyland.com 2018 Hyland. Hyland and the Hyland

More information

Intel Small Business Extended Access. Deployment Guide

Intel Small Business Extended Access. Deployment Guide Intel Small Business Extended Access Deployment Legal Notices and Disclaimers Disclaimers INTEL CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE

More information

Smart Install in LMS CHAPTER

Smart Install in LMS CHAPTER CHAPTER 6 Smart Install (SI) is a plug-and-play configuration and image management feature that provides zero-touch deployment for new switches. You can configure SI on a switch which will then be the

More information

WhatsUp Gold 2016 Installation and Configuration Guide

WhatsUp Gold 2016 Installation and Configuration Guide WhatsUp Gold 2016 Installation and Configuration Guide Contents Installing and Configuring WhatsUp Gold using WhatsUp Setup 1 Installation Overview 1 Overview 1 Security considerations 2 Standard WhatsUp

More information

TM1 9.5 Quick Installation and Upgrade Guide. Nature of Document: Tip or Technique Product(s): TM1 9.5 Area of Interest: Upgrade/Migration

TM1 9.5 Quick Installation and Upgrade Guide. Nature of Document: Tip or Technique Product(s): TM1 9.5 Area of Interest: Upgrade/Migration TM1 9.5 Quick Installation and Upgrade Guide Nature of Document: Tip or Technique Product(s): TM1 9.5 Area of Interest: Upgrade/Migration 2 Copyright and Trademarks Licensed Materials - Property of IBM.

More information

Setting up IMAP Mail in Outlook

Setting up IMAP Mail in Outlook Setting up IMAP Mail in Outlook Setting up the Certificate in Internet Explorer 1. Open up Internet Explorer. Browse to https://intranet.yourschooldomain.school.nz. You will get a Certificate Error. Click

More information

Cisco VVB Installation

Cisco VVB Installation System Requirements, on page 1 Create VM for Cisco VVB, on page 2 Create a Virtual Machine from the OVA, on page 2 Configure DNS Server, on page 3 Mount ISO Files, on page 3 Install Cisco VVB, on page

More information

R9.7 erwin License Server:

R9.7 erwin License Server: R9.7 erwin License Server: Installation and Setup This is a quick guide to setting-up a erwin DM License Server. NOTES: - Concurrent licensing is available for only erwin r8.2 and later releases! - Concurrent

More information

Troubleshooting Single Sign-On

Troubleshooting Single Sign-On Security Trust Error Message, page 1 "Invalid Profile Credentials" Message, page 2 "Module Name Is Invalid" Message, page 2 "Invalid OpenAM Access Manager (Openam) Server URL" Message, page 2 Web Browser

More information

Using ANM With Virtual Data Centers

Using ANM With Virtual Data Centers APPENDIXB Date: 3/8/10 This appendix describes how to integrate ANM with VMware vcenter Server, which is a third-party product for creating and managing virtual data centers. Using VMware vsphere Client,

More information

Configure the Cisco DNA Center Appliance

Configure the Cisco DNA Center Appliance Review Cisco DNA Center Configuration Wizard Parameters, page 1 Configure Cisco DNA Center Using the Wizard, page 5 Review Cisco DNA Center Configuration Wizard Parameters When Cisco DNA Center configuration

More information

Managing Software Images Using Software Management

Managing Software Images Using Software Management CHAPTER 8 Managing Software Images Using Software Management Manually upgrading your devices to the latest software version can be an error-prone, and time-consuming process. To ensure rapid, reliable

More information

Decision Support AITS University Administration. Web Intelligence Rich Client Installation Guide

Decision Support AITS University Administration. Web Intelligence Rich Client Installation Guide Decision Support AITS University Administration Web Intelligence Rich Client Installation Guide Contents Purpose of this Document... 3 Installing Web Intelligence Rich Client... 3 Launching Web Intelligence

More information

Setup Guide. Page 0

Setup Guide. Page 0 Email Setup Guide Page 0 Table of Contents Mailbox Setup Guide... 2 Before you Start... 2 Desktop Mail Clients... 3 Outlook 2016 setup... 3 Outlook 2013 setup... 7 Outlook 2010 setup... 12 Windows 10 Mail

More information

Configuring Service Monitor

Configuring Service Monitor CHAPTER 3 The following topics are included: Configuring Trap Receivers, page 3-2 Understanding and Setting Data Source Credentials, page 3-2 Managing the Phone Count, page 3-15 Configuring Settings for

More information

Internet Script Editor

Internet Script Editor ISE Application, page 1 ISE Functionality, page 1 ISE Requirements, page 2 TLS Requirements for ISE, page 2 ISE Installation and Upgrades, page 5 Troubleshooting Tools for, page 7 ISE Application You can

More information

Covene Cohesion Server Installation Guide A Modular Platform for Pexip Infinity Management October 25, 2016 Version 3.3 Revision 1.

Covene Cohesion Server Installation Guide A Modular Platform for Pexip Infinity Management October 25, 2016 Version 3.3 Revision 1. Covene Cohesion Server Installation Guide A Modular Platform for Pexip Infinity Management October 25, 2016 Version 3.3 Revision 1.0 Table of Contents 1. Overview... 3 2. Upgrading an Existing Installation...

More information

VMware AirWatch Integration with RSA PKI Guide

VMware AirWatch Integration with RSA PKI Guide VMware AirWatch Integration with RSA PKI Guide For VMware AirWatch Have documentation feedback? Submit a Documentation Feedback support ticket using the Support Wizard on support.air-watch.com. This product

More information

Troubleshooting Single Sign-On

Troubleshooting Single Sign-On Security Trust Error Message, on page 1 "Invalid Profile Credentials" Message, on page 2 "Module Name Is Invalid" Message, on page 2 "Invalid OpenAM Access Manager (Openam) Server URL" Message, on page

More information