Thin clients JC500X - 1 Reference guide

Transcription

1 Thin clients JC500X - 1 Reference guide 1. Product introduction 1-1 product overview Using Intel N2840 BayTrail dual-core embedded processor ( or Intel J2900), low power consumption new fashionable appearance, unique design of industrialization, is suitable for hanging, horizontal. A peripheral interface, provide a rich industry meet the demand of industry application. The Mini PC appearance, completely change traditional model of large mainframe computers, high-end and contracted environmental protection concept, is the first selection of thin client products. Product characteristics A. strong local processing, support CITRIX, VMWARE virtualization and RDP protocol, high cost performance; B. rich peripheral interfaces, perfectly meet the demand of industry Equipped with four USB ports (USB2.0 * 3; see * 1), the rich industry such as support for VGA, DVI interface, meet the demand of various industries. C. the fashion appearance, industrial design Streamline design used in the old industry demand, cost savings, high-end and contracted environmental protection concept D. low-power chips, high-performance products, comfortable office new experiences A single machine power consumption < 15 w, energy conservation and environmental protection; Unique fanless design, the "static" your office environment, bring more comfortable office experience. E. industrial design concept: the stain and long service life. F. support WES7 cloud embedded operating system or with Beijing JCOS system. 1-2 front-end interface

2 The front-end interface 1. The microphone input 2. The headphone output 3. The USB interface 4. The USB interface 5. The power indicator light 6. The power button 1-3 backend interface The backend interface 1. The power input socket 2. The DVI interface 3. The USB 4. The VGA interface 5. RJ serial number Every cloud terminal has unique serial number. When a user has a service request, service hotline or website for help, please provide the serial number.

3 2 the product installation Non-professional maintenance personnel do not open the cloud terminal box cover, to avoid the electric shock risk. Use ac 220 v power supply, please ensure that the voltage match the region to provide ac power source voltage. Please be sure to use a grounding protection of the three core power and socket. If replace the power cord without authorization, and may lead to serious consequences. It is forbidden to brute force plug system components. The whole operation process, must be in state of power cuts. Replace the wrong type power supply may be an explosion, be sure to use the original power supply. Prohibited in the case of not to cut off the power supply to plug the USB device. Untouchable components, the operator must first before proceeding to electrostatic discharge, wear anti-static gloves. 2-1 the product installation process The before installation In order to use the cloud terminal, we need to prepare some peripheral devices. 1) video output devices: you can choose to have a variety of output devices of VGA, DVI interface, including displays, projectors, and some types of LCD TV, etc. 2) network interface: cloud terminal main function is the function of the network terminal, so the network connection is very important. Please prepare open network interface. 3) input devices: USB keyboard and mouse device. 4) headset with a microphone, headphones and microphone, ready to use cloud terminal voice function. 5) USB interface: select the cloud terminal support USB peripherals. Prepare for the above, you can start to experience the cloud terminal. The product installation Cloud terminal, JC500X - 1 connected peripherals can be used directly. Installation configuration as shown in the figure below:

4 You only need to connect the keyboard, mouse, and the power cord, switch on the power, press the power button monitor and cloud terminal power button, the system can be normal boot. 3 the product specifications JC500X - 1 terminal product specification parameters CPU:2.16 GHz dual-core processor system configuration Operating system :JCOS/WES09 / WES7 Cloud management :Beijing Jingyun equipment management system (optional) 2 g memory system memory (optional) 4 g / 8 g Storage SSD 8 g (64 g) extensible 10/100/1000 m Ethernet network adaptive, built-in wireless card, support b/g/n wireless transmission Display graphics integration Highest resolution support 1920 x1200 audio HD audio sound card multi-channel sound card VGA display interface - out * 1 panel interface DVI * 1 Usb2.0*3 Usb3.0*1 1 gigabit front-end ports with status indicators A power input interface Headphone jack a 1 the microphone jack The Power Button * 1, the light key one

5 Appearance of the fuselage size 165 mm * 112 mm * 36 mm Weight 0.7 Kg External power supply adapter 12 v / 3 a The power consumption of 15 w Working environment temperature 0 C to 40 C Humidity (no condensation) 30% to 30% Cooling fan cooling 0 db noise other Warranty period of 3 years limited hardware warranty (including power supply) The use of cloud terminal daily maintenance Please use the following information is correct to maintain your cloud terminal JC500X - 1: (1) please do not remove the clouds outside the terminal board using cloud terminal. (2) don't put too moist cloud terminal, direct sunlight, excessive heat or cold environment. Relevant for cloud JC500X - 1 suggest the temperature and humidity range terminal information, please refer to the "product specification". (3) the cloud terminal and keyboard away from all kinds of liquid. (4) close the cloud terminal, and then according to the need with a soft wet cloth to wipe the cloud terminal surface, the use of cleaning products may lead to fade or damage to the surface coating. (5) do not block cooling hole or items are placed in the upper case, terminal needs proper ventilation to keep them working temperature of cloud, and not bearing the case. 4-2 placed direction You must strictly follow the placement of support direction to ensure that your cloud terminal can work normally. Does not support the placement of other direction may cause use failure and/or damage to equipment. Cloud terminal needs proper ventilation, at a relatively low working temperature to ensure the continuous and stable operation. You can placed the cloud terminal. You can put the cloud hanging to the display terminal backend. 5 electrostatic discharge The human body or other conductor's static electricity can damage the mainboard or other sensitive to electrostatic device, the damage may shorten the expected service life of equipment. 5-1 to prevent electrostatic damage To prevent electrostatic damage, please follow the following safety precautions: 1) the product in antistatic packaging, in order to avoid directly in the transportation and storage process or move hand contact with the product. 2) In standing within the workplace, please use the belt, belt or boots with the toes. When you stand in conductive floor or dissipation floor mat, please tie strap on your feet. 3) the first system components placed on the ground surface, and then it will be retrieved from the packaging.

6 4) please do not contact pin, conductor or circuit. When in contact with the electrostatic sensitive components and devices, must take the appropriate grounding measures. 5-2 grounding method There are several kinds of earthing methods for your choice, take put or installation of electrostatic sensitive components, you can use the method of grounding one or more of the following: 1) You can use a wrist strap, and then through the ground wire is connected to a grounded cloud terminal box, wrist strap must be able to flexible, and ground wire at least 1 megohm resistor. To achieve the grounding, wearing wristbands please close to the skin. 2) stand in the workplace, please use the belt, belt or boots with the toes. When you stand in conductive floor or dissipation floor mat, please tie strap on your feet. 3) please use conductive on-site maintenance tools. 4) cooperate to use anti-static work folding mat and portable field maintenance kit. Package, storage and shipping 6-1 the packing JC500X-1 need to use anti-static bag packaging. The system components and peripherals into boxes, fill in enough filler material to protect. 6-2 storage Products are strictly forbidden to the open-air storage, should satisfy the following conditions: Packing ban stacked, tilt, horizontal, and backwards Avoid vibration shock, mechanical damage, heavy pressure Prevent sun direct sun, rain and snow shower Do not contact with all kinds of harmful gas, flammable products and corrosive chemicals Avoid strong magnetic field Storage temperature: 55 to 10 C - C Storage environment relative humidity: 25 C, humidity 80%, or less without condensation 6-3 shipment Products are strictly prohibited without the packing and shipping, to meet the packaging and storage conditions can be used when any mode of transportation highway, railway, aviation, etc. 6-4 important maintenance information In any case, the cloud terminal before returning to Beijing cloud tech centers for repair or replacement, please remove and keep all outside option. In supporting the customer mail service area, Beijing cloud tech center will try our best to repair after the equipment and send the original built-in memory and flash memory module return customers. In does not support the customer mail service areas, in addition to outside option, all internal option should unload and save well, too, in the cloud terminal to the Beijing cloud tech centers for repair before, should be restored to its factory configuration. Cloud specific maintenance information, please refer to "Beijing Jingyun l service manual.