or

Size: px

Start display at page:

Download "or"

Lawrence Dixon
5 years ago
Views:

Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc.

Infinitely Configurable Personalize cabinets by configuring the options and accessories that work best for your data center.

1 Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc. (CPI) provides configurable thermal management solutions to meet specific data center needs. Infinitely Configurable Personalize cabinets by configuring the options and accessories that work best for your data center. With three widths, 12 heights and 17 depths, there are 612 standard sizes to choose from to customize your solution. Thermal Management Designed specifically to solve thermal issues in your data center using CPI Passive Cooling TM Solutions, the F-Series TeraFrame eliminates the need for expensive cooling equipment with patented thermal control. Cable Management Provides cable management to keep network and power cables separate, control power cord slack and support multiple power strips or PDUs for full power redundancy. Availability Arrives fast and ready to install - cutting your lead-time dramatically and keeping you on schedule. CPI Passive Cooling T M Solutions offer: Flexibility - Uncomplicated moves, adds and changes and configurable to meet specific needs Scalability - Adaptable for increasing density requirements and achieves kw of cooling per cabinet Tier IV Capability - Zero point of failure Minimize Total Cost of Ownership - Maximizes CRAC effectiveness and decreases ongoing maintenance costs For network switches with side-to-side airflow in a hot aisle/cold aisle layout, try the new N-Series TeraFrame Network Cabinet. This cabinet is designed to meet third party specifications for Cisco & 9500 switches. N-Series TeraFrame Cabinet or techsupport@chatsworth.com

) in data centers, computer rooms and equipment rooms and contacts you when sensor thresholds are crossed. Each system consists of one Host (base module) and up to 31 Nodes (expansion modules).

60000-001 Host Module, 100-250 VAC, 50-60 Hz 60001-002 Node Module, 100-240 VAC, 50-60 Hz 60012-007 Miniature Temperature Sensor, 5 F To 140 F 60052-002 Door Open/Closed Sensor For Cabinets Note:

The basic system consists of a Communications Module, one or several Lock Control Modules and a Lock Upgrade Kit for each door.

2 SECTION CHATSWORTH PRODUCTS, INC. FEATURED PRODUCTS Remote Infrastructure Management (RIM-600) System The Remote Infrastructure Management (RIM-600) System monitors and records environmental conditions (temperature, humidity, etc.) in data centers, computer rooms and equipment rooms and contacts you when sensor thresholds are crossed. Each system consists of one Host (base module) and up to 31 Nodes (expansion modules). Each Host/Node connects directly to the network and supports eight external sensors. Monitoring software is included with the Host for easy desktop monitoring and changes Host Module, VAC, Hz Node Module, VAC, Hz Miniature Temperature Sensor, 5 F To 140 F Door Open/Closed Sensor For Cabinets Note: Other sensors available. Electronic Locking System The Electronic Locking System automates access control for the CPI TeraFrame Family of Cabinets with up to five access codes for each door. The basic system consists of a Communications Module, one or several Lock Control Modules and a Lock Upgrade Kit for each door. Each Lock Control Module connects eight Lock Upgrade Kits (four cabinets) to the Communications Module. The Communications Module provides the network connection and control software interface for up to 64 Lock Control Modules and 512 Lock Upgrade Kits (256 cabinets). The Electronic Locking System includes lock control software for easy configuration changes and keeps an electronic record of each cabinet access attempt Communications Module Lock Control Module For 8 Lock Upgrade Kits (4 Cabinets) Lock Upgrade Kit For TeraFrame Perforated Front Door Lock Upgrade Kit For TeraFrame Rear Door Note: Other lock upgrade kits available. Keypad and Proximity Card Reader Modules also available. N-Series TeraFrame Network Cabinet (2,500 lb Load Rating) The N-Series TeraFrame Network Cabinet provides the solution for placing switches that require sideto-side airflow in hot aisle/cold aisle environments. Offset doors and side panels provide extra cable management space inside the cabinet. The optional Network Switch Exhaust Duct guides hot exhaust air from the right side of the cabinet (switch exhaust) to the rear door, maintaining front-to-rear airflow through the cabinet. NF0K-113C-C42 NF1K-113C-C42 NF2K-113C-C42 NF3K-113C-C42 Cabinet, No Duct, 31.5" W x 83.5" H x 44.2" D, Cabinet, With Duct, 31.5" W x 83.5" H x 44.2" D, Recommended For Cisco 6506, 6509, 6513 And 9509 Switches Recommended For Cisco 9513 Switches Note: Cabinets have square-punched mounting rails, perforated single front and double rear doors, two-point latches with keyed locks, solid top panel with 14 cable pass-through ports and two solid side panels. Maximum mounting rail depth is 25.6" D. Other sizes and colors available.

CABINETS Enclosed Mounting Solutions M-Series MegaFrame Cabinet (2,000 lb Load Rating) F-Series TeraFrame Cabinet (2,500/2,000 lb Load Rating) The M-Series MegaFrame Cabinet System is a bolted

The M-Series MegaFrame is available in 24 standard sizes (two widths, three heights and four depths) and includes adjustable depth front and rear equipment mounting rails.

3 CABINETS Enclosed Mounting Solutions M-Series MegaFrame Cabinet (2,000 lb Load Rating) F-Series TeraFrame Cabinet (2,500/2,000 lb Load Rating) The M-Series MegaFrame Cabinet System is a bolted aluminum cabinet used to store server, network and data storage equipment in data centers, computer rooms and equipment rooms. The M-Series MegaFrame is available in 24 standard sizes (two widths, three heights and four depths) and includes adjustable depth front and rear equipment mounting rails. Choose mounting rail, door, top and side panel style and color to match your requirements. Thermal and cable management accessories are available. M Cabinet, 27.3" W x 84.9" H x 33.6" D, 19" EIA x 45 RMU x 30" D, Black M Cabinet, 27.3" W x 84.9" H x 39.6" D, 19" EIA x 45 RMU x 36" D, Black M Cabinet, 27.3" W x 84.9" H x 42.6" D, 19" EIA x 45 RMU x 39" D, Black Note: Cabinets have square-punched mounting rails, perforated single front and rear doors, single-point latches with keyed locks, solid top panel with four cable pass-through ports, and two solid side panels. Other styles, sizes and colors available. The F-Series TeraFrame Cabinet System is a welded steel cabinet used to store server and data storage equipment in data centers, computer rooms and equipment rooms. The F-Series TeraFrame is available in 612 standard sizes (three widths, 12 heights and 17 depths) and includes adjustable depth front and rear equipment mounting rails. Choose mounting rail, door, latch (lock), top and side panel style and color to match your requirements. Thermal, power and cable management accessories are available. FF1K-113C-C22 Cabinet, 23.6" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black FF1K-113C-C22 Cabinet, 27.6" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black FF2K-113C-C22 Cabinet, 31.5" W x 83.5" H x 44.2" D, 19" EIA x 45 RMU x 37.4" D, Black Note: Cabinets have square-punched mounting rails, perforated single front and double rear doors, two-point latches with keyed locks, solid top panel with four cable pass-through ports, and two solid side panels. Other styles, sizes and colors available. Cabinet Shelves LCD Monitor And Shelf, 4-Post, 19" W x 2 RMU, Includes 0.17" LCD Monitor Keyboard And Tray, 4-Post, 19" W x 1 RMU, Includes Keyboard With Track Pad Sliding Shelf, 19" W x 2 RMU x 32" D, 160 lb Load Rating, For Cabinets 36" Or 39" D Sliding Vented Shelf, 19" W x 2 RMU x 32" D, 160 lb Load Rating, For Cabinets 36" Or 39" D Fixed Vented Shelf, 19" W x 1 RMU x 20" To 36" D, (Telescoping Depth), 100 lb Load Rating -2

CABINETS Enclosed Mounting Solutions Enhanced Cable Managers For Cabinets Air Dam Kits For Cabinets Enhanced Vertical Managers organize cables by rack-mount space, making it easier to trace

Additionally, two Enhanced Vertical Managers can be connected with Front-to-Back Managers (as shown) to create a complete pathway for patch cords that connect network switches and computers within

4 CABINETS Enclosed Mounting Solutions Enhanced Cable Managers For Cabinets Air Dam Kits For Cabinets Enhanced Vertical Managers organize cables by rack-mount space, making it easier to trace individual cables during moves, adds and changes. Additionally, two Enhanced Vertical Managers can be connected with Front-to-Back Managers (as shown) to create a complete pathway for patch cords that connect network switches and computers within the same or adjacent cabinets. ENHANCED VERTICAL CABLE MANAGERS For 27.3" W M-Series MegaFrame Cabinet, 84" H x 3.5" W x 5.2" D, Black C01 For 23.6" W F-Series TeraFrame Cabinet, 84" H x.76" W x 9.3" D, Black C51 For 27.6" W F-Series TeraFrame Cabinet, 84" H x 2.7" W x 10.1" D, Black C01 For 27.6" W F-Series TeraFrame Cabinet, 84" H x 2.7" W x 12.6" D, Black C52 For 31.5" W F-Series TeraFrame Cabinet, 84" H x 4.6" W x 10.1" D, Black C02 For 31.5" W F-Series TeraFrame Cabinet, 84" H x 4.6" W x 12.6" D, Black Note: Each cable manager reduces mounting rail depth in the cabinet by approximately 7". Reduce mounting rail depth by 14" if cable managers are placed at the front and back of the cabinet as shown in the graphic above. FRONT-TO-REAR MANAGERS For 27.3" W M-Series MegaFrame Cabinet, 2.3" H x 1.7" W, 2 Each, Black C01 For 27.6" W F-Series TeraFrame Cabinet, 2.3" H x 2.3" W, 2 Each, Black C01 For 31.5" W F-Series TeraFrame Cabinet, 3.8" H x 4.2" W, 2 Each, Black Note: Other sizes available. Not available for 23.6" W F-Series TeraFrame Cabinets. Air Dam Kits guide cool air to the front of equipment and isolate heated exhaust air at the rear of the cabinet. Use Air Dam Kit with perforated front and rear doors when cooling air enters through the front of the cabinet. For best results, close all open rack-mount spaces in the rack with filler panels. AIR DAM KITS For 27.3" W x 84.9" H, M-Series MegaFrame Cabinet, 5" D, Black C05 For 23.6" W x 83.5" H, F-Series TeraFrame Cabinet, Black C05 For 27.6" W x 83.5" H, F-Series TeraFrame Cabinet, Black C05 For 31.5" W x 83.5" H, F-Series TeraFrame Cabinet, Black Note: Air Dam Kit reduces the front mounting rail depth by approximately 1.7" in F-Series TeraFrame Cabinet. SNAP-IN FILLER PANELS " EIA x 1 RMU, 6 Each, Black " EIA x 2 RMU, 6 Each, Black Note: Other styles and sizes available. Use in CPI Cabinets with 19" EIA square-punched mounting rails. -3

SOLUTIONS Open Mounting Solutions QuadraRack Server Frame (1,000 lb Load Rating) QuadraRack 4-Post Frame (2,000 lb Load Rating) Fixed depth four-post racks that provide open front and rear support

5 SOLUTIONS Open Mounting Solutions QuadraRack Server Frame (1,000 lb Load Rating) QuadraRack 4-Post Frame (2,000 lb Load Rating) Fixed depth four-post racks that provide open front and rear support for large, heavy rack-mount equipment like modular network switches. Choose threaded (4-Post Frame) or squarepunched (Server Frame) equipment mounting holes. Cable management accessories are available Post Frame, 19" W x 7' H x 29" D, Post Frame, 19" W x 8' H x 29" D, Post Frame, 19" W x 9' H x 29" D, Server Frame, 19" W x 7' H x 29" D, Adjustable QuadraRack (2,000 lb Load Rating) Adjustable ServerRack (2,000 lb Load Rating) Adjustable depth four-post racks that provide open front and rear support for large, heavy rack-mount equipment like modular network switches. The front and rear mounting channels adjust in depth during assembly by.98" (25 mm) increments to match equipment requirements. Each rack has seven depth settings. Choose threaded (QuadraRack ) or square-punched (ServerRack) equipment mounting holes. Cable management accessories are available QuadraRack, 19" W x 7' H,.75"-21.65" D, QuadraRack, 19" W x 7' H, 22.64"-28.54" D, QuadraRack, 19" W x 7' H, 29.53"-35.43"D, QuadraRack, 19"W x 7' H, 36.42"-42.32" D, ServerRack, 19" W x 7' H,.75"-21.65" D, ServerRack, 19" W x 7' H, 22.64"-28.54" D, Adjustable ServerRack (2,000 lb Load Rating) (Continued) ServerRack, 19" W x 7' H, 29.53"-35.43" D, ServerRack, 19" W x 7' H, 36.42"-42.32" D, Note: Other sizes and colors available. Standard Rack (1,000 lb Load Rating) Universal Rack (1,500 lb Load Rating) Standard Rack and Universal Rack are twopost racks used to support patch panels and other network equipment in data centers, computer rooms and equipment rooms. Aluminum racks bolt together and have 3" or 6" deep C-shaped threaded mounting channels with marked and numbered RMU spaces. Cable management accessories are available Universal Rack, 19" W x 84" H, Universal Rack, 19" W x 96" H, 51 RMU, Black Universal Rack, 19" W x 108" H, 58 RMU, Black " Deep Standard Rack, 19" W x 84" H, Standard Rack, 19" W x 84" H, Standard Rack, 19" W x 96" H, 51 RMU, Black Standard Rack, 19" W x 108" H, 58 RMU, Black Installation Kit, Concrete Slab Note: Other sizes and colors available. Racks are UL Listed. Rack Shelves Single-Sided, 19" EIA x 3 RMU, 17.25" W x 14.8" D, 50 lb Load, Black Double-Sided, 19" EIA x 4 RMU, 17.75" W x 21.5" D, 100 lb Load, Black Double-Sided, 19" EIA x 5 RMU, 17.75" W x 25.8" D, 0 lb Load, Black Double-Sided, 19" EIA x 5 RMU, 17.75" W x 19.8" D, 200 lb Load, Black Mounting Screws, #12-24, 50 Each, Black Note: Other styles, sizes and colors available. Use Double-Sided Shelves with 3" deep racks. Shelves are UL Listed. -4

SOLUTIONS Rack Cable Management Global Standard Pack (1,000 lb Load Rating) The Global Standard Pack is an easy-to-use solution for managing equipment and cabling at the cross connect.

6 SOLUTIONS Rack Cable Management Global Standard Pack (1,000 lb Load Rating) The Global Standard Pack is an easy-to-use solution for managing equipment and cabling at the cross connect. It includes one CPI Standard Rack, a concrete floor installation kit, and one or two 6.76" D CPI Global Vertical Cabling Sections packaged in a single carton. Rack holds 1,000 lb of equipment X03 Rack with (1) 3.65" W Global Vertical Cabling Section X03 Rack with (2) 3.65" W Global Vertical Cabling Sections X03 Rack with (1) 6" W Global Vertical Cabling Section X03 Rack with (2) 6" W Global Vertical Cabling Sections Note: X = color: 5 = clear, 7 = black Universal Horizontal Cable Manager 19" wide rack-mount cable manager for use above patch panels and interconnect switches to organize patch cords. Use with GVCS Global Vertical Cabling Section, CCS Combination Cabling Section and MCS Master Cabling Section RMU, 19" W, Deep, Black RMU, 19" W, Deep, Black RMU, 19" W, Deep, Black RMU, 19" W, Black RMU, 19" W, Black RMU, 19" W, Black Note: Open ring-style managers also available. Use deep versions with MCS Master Cabling Section and 3" deep Standard or Universal Racks. CCS Combination Cabling Section Provides a vertical cable pathway in between equipment racks. Double-sided trough includes a closed front-side pathway for patch cords and an open rear-side pathway for premise cables. Front-side features 1 RMU openings for patch cords that align with rack-mount spaces on the rack and a removable door that opens right or left and latches closed. Rear-side features swivel latch closures spaced vertically every 12". Available in three widths and three heights, select to match the style of rack. CCS Combination Cabling Section (Continued) USE WITH STANDARD AND UNIVERSAL RACKS CCS, 3.65" W x 84" H x 12.24" D, Black CCS, 3.65" W x 96" H x 12.24" D, Black CCS, 3.65" W x 108" H x 12.24" D, Black CCS, 6" W x 84" H x 12.24" D, Black CCS, 6" W x 96" H x 12.24" D, Black CCS, 6" W x 108" H x 12.24" D, Black CCS, 10" W x 84" H x 12.24" D, Black CCS, 10" W x 96" H x 12.24" D, Black CCS, 10" W x 108" H x 12.24" D, Black USE WITH 6" DEEP STANDARD RACKS CCS, 3.65" W x 84" H x 14.61" D, Black CCS, 6" W x 84" H x 14.61" D, Black CCS, 10" W x 84" H x 14.61" D, Black MCS Master Cabling Section Use MCS to organize large quantities of cable. Cable openings align with each rack-mount space on the rack. Includes front and rear door/covers that hinge open to the right or left and latch closed. Double-sided MCS are available in three widths and two depths. Select MCS to match the height of the rack. Rear door/cover removed to show cable openings in photo MCS, Double-Sided, 6" W x 84" H x 16.2" D, Black MCS, Double-Sided, 10" W x 84" H x 16.2" D, Black MCS, Double-Sided, 6" W x 84" H x 21.2" D, Black MCS, Double-Sided, 10" W x 84" H x 21.2" D, Black MCS, Double-Sided, 12" W x 84" H x 21.2" D, Black Note: Other sizes available. Single-sided versions are also available. GVCS Global Vertical Cabling Section A single-sided cabling section that can be used back-to-back or with cable rings to create a solution similar to CCS. GVCS has cable openings that align with each rack-mount space on the rack and includes a snap on cover to protect cables GVCS, Single-Sided, 6" W x 84" H x 6.7" D, Black GVCS, Single-Sided, 6" W x 84" H x 9.3" D, Black GVCS, Single-Sided, 3.6" W x 84" H x 6.7" D, Black GVCS, Single-Sided, 3.6" W x 84" H x 9.3" D, Black Cable Rings for 6" W GVCS Cable Rings for 3.6" W GVCS -5

SOLUTIONS Wall-Mount CUBE-iT PLUS Cabinet System (200 lb Load Rating) Standard Swing Gate Wall Racks (100 lb Load Rating) CUBE-iT Plus Cabinet System features a 5" deep rear panel with eight cable

CUBE-iT includes one pair of 19" wide threaded #12-24 equipment mounting rails that are adjustable front-to-rear within the body of the cabinet and supports up to 200 pounds of equipment.

Choose from three heights (24", 36", 48"), four depths (13", 18", 24", 30"), and two colors.

7 SOLUTIONS Wall-Mount CUBE-iT PLUS Cabinet System (200 lb Load Rating) Standard Swing Gate Wall Racks (100 lb Load Rating) CUBE-iT Plus Cabinet System features a 5" deep rear panel with eight cable entry ports (four top, four bottom). The body of the cabinet swings open for ease of access to the rear of rackmounted equipment. CUBE-iT includes one pair of 19" wide threaded #12-24 equipment mounting rails that are adjustable front-to-rear within the body of the cabinet and supports up to 200 pounds of equipment. The front door and body are keyed alike, and the door is available with a solid metal or smoked plexiglass panel. Choose from three heights (24", 36", 48"), four depths (13", 18", 24", 30"), and two colors CUBE-iT PLUS, 24" W x 24" H x 13" D, 12 RMU, Metal Door, Black CUBE-iT PLUS, 24" W x 24" H x 13" D, 12 RMU, Plexiglass Door, Black CUBE-iT PLUS, 24" W x 24" H x 18" D, 12 RMU, Metal Door, Black CUBE-iT PLUS, 24" W x 24" H x 18" D, 12 RMU, Plexiglass Door, Black CUBE-iT PLUS, 24" W x 24" H x 24" D, 12 RMU, Metal Door, Black CUBE-iT PLUS, 24" W x 24" H x 24" D, 12 RMU, Plexiglass Door, Black CUBE-iT PLUS, 24" W x 24" H x 30" D, 12 RMU, Metal Door, Black CUBE-iT PLUS, 24" W x 24" H x 30" D, 12 RMU, Plexiglass Door, Black Note: Other sizes and colors available. Larger 1,000 lb capacity wall and floor-supported cabinets are also available. Perfect for installing small quantities of equipment in confined spaces, Swing Gate Racks are available in various sizes to meet your networking needs. Easy to install, the frame attaches at 16" centers and the gate features spring loaded latches. Swing Gate has C-shaped mounting rails with marked and numbered RMU spaces, threaded front and rear just like a freestanding rack, can open to the right or left, and will support 100 pounds of equipment in both the open and closed positions. Heavy Duty Swing Gate Kit increases load bearing capacity to 0 lb Swing Gate, 19" W x 24.5" H x 18" D, 13 RMU, Black Swing Gate, 19" W x 38.5" H x 18" D, 21 RMU, Black Swing Gate, 19" W x 49.0" H x 18" D, 27 RMU, Black Swing Gate, 19" W x 73.5" H x 18" D, 41 RMU, Black Cable Rings, Set Of 6, Black Heavy Duty Swing Gate Kit, Black Note: Other sizes and colors available. Fixed Wall-Mount Equipment Rack (200 lb Load Capacity) Similar to the Standard Swing Gate Wall Rack but with fixed equipment mounting channels, Fixed Wall-Mount Equipment Rack doubles the load bearing capacity to 200 pounds. Use it to support heavier switches and equipment. Some models can be ordered with an enclosure Fixed, 19" W x 24.5" H x 18" D, 13 RMU, Black Fixed, 19" W x 38.5" H x 18" D, 21 RMU, Black Fixed, 19" W x 73.5" H x 18" D, 41 RMU, Black Cable Rings, Set Of 6, Black Note: Other sizes and colors available. -6

SOLUTIONS Building Entrance & Cable Pathway Cable Runway Cable Runway Supports (Continued) PART NO.

12408-724 Rack Mounting Plate, 24" W 10506-706 Rack Elevation Kit, 4" - 6" H 10608-001 Vertical Wall Brackets, 1 Pair 10250-712 Universal Cable Runway, 12" W x 9'-11.

5" L, Black Cable Runway Accessories Cable Runway Pathway Components 10822-712 E-Bend, 12" W 10822-718 E-Bend, 18" W 10723-712 Outside Radius Bend, 12" W 10723-718

W 12100-712 Cross Member Radius Drop, 12" W 12100-718 Cross Member Radius Drop, 18" W 10642-001 End Caps, 1 Pair 13392-711 Runway Dividers, 5 Pack 13392-712 Runway

Wall Angle Support Kit, 18" W 11421-724 Wall Angle Support Kit, 24" W 11746-712 Triangular Support Kit, 12" W 11746-718 Triangular Support Kit, 18" W 11746-724

8 SOLUTIONS Building Entrance & Cable Pathway Cable Runway Cable Runway Supports (Continued) PART NO Threaded Ceiling Kit Cabinet Elevation Kit, 4" - 6" H Foot Kit Rack Mounting Plate, 12" W Rack Mounting Plate, 18" W Rack Mounting Plate, 24" W Rack Elevation Kit, 4" - 6" H Vertical Wall Brackets, 1 Pair Universal Cable Runway, 12" W x 9'-11.5" L, Black Universal Cable Runway, 18" W x 9'-11.5" L, Black Universal Cable Runway, 24" W x 9'-11.5" L, Black Cable Runway Accessories Cable Runway Pathway Components E-Bend, 12" W E-Bend, 18" W Outside Radius Bend, 12" W Outside Radius Bend, 18" W Outside Radius Bend, 24" W Corner Bracket, " x " Corner Bracket, 24" x 24" Cross Member Radius Drop, 6" W Cross Member Radius Drop, 12" W Cross Member Radius Drop, 18" W End Caps, 1 Pair Runway Dividers, 5 Pack Runway Dividers, 25 Pack Cable Runway Splices Cable Runway Supports Butt Splice Kit Junction Splice Kit Wall Angle Support Kit, 12" W Wall Angle Support Kit, 18" W Wall Angle Support Kit, 24" W Triangular Support Kit, 12" W Triangular Support Kit, 18" W Triangular Support Kit, 24" W Center Support Kit, 12" W Center Support Kit, 18" W Center Support Kit, 24" W Threaded Rod, 5/8-11 x 6' L I-Beam Clamp for 5/8-11 Rod PatchRack for CPI Cable Runway Patch Panel Rack, 19" W x 8 RMU D-Ring Kit, 10 Pack -7

SOLUTION Building Entrance & Cable Pathway FASTTRAC Cable Tray Create point-to-point pathway Use under raised floor or overhead East to cut and form Fast to install Zinc electroplating allows use

9 SOLUTION Building Entrance & Cable Pathway FASTTRAC Cable Tray Create point-to-point pathway Use under raised floor or overhead East to cut and form Fast to install Zinc electroplating allows use within plenum space UL classified as equipment grounding conductor 2" HEIGHT 5' LONG 10' LONG " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc " W x 2" H, Zinc 4" HEIGHT 5' LONG 10' LONG " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc " W x 4" H, Zinc 6" HEIGHT 5' LONG 10' LONG " W x 6" H, Zinc " W x 6" H, Zinc " W x 6" H, Zinc " W x 6" H, Zinc " W x 6" H, Zinc " W x 6" H, Zinc SUPPORTS AND FASTENERS Center Support Bracket, 4" W, for 3/8" Rod Center Support Bracket, 6"-8" W, for 3/8" Rod Center Support Bracket, 12" W, for 3/8" Rod Center Support Bracket, 16" W, for 3/8" Rod Center Support Bracket, 18"-20" W, for 3/8" Rod Center Support Bracket, 24" W, for 3/8" Rod Intersect Support Plate, 4"-8" W Intersect Support Plate, 12"-16" W Intersect Support Plate, 20"-24" W Triangle Support Bracket, 4" W Triangle Support Bracket, 6"-8" W Triangle Support Bracket, 12" W Triangle Support Bracket, 16" W Triangle Support Bracket, 18"-20" W Triangle Support Bracket, 24" W Wall Termination Support, 4"-8" W Wall Termination Support, 12"-16" W Wall Termination Support, 18"-24" W Under Floor Support Bracket, 20" W x 3" H Under Floor Support Bracket, 20" W x 6" H Under Floor Support Bracket, 20" W x 9" H Wire Shear Wire Bender Cable Roller Ground Washer Kit, 50 Pack (Use Over Supports) Pedestal Clamp Washer Splice Kit, 50 Pack (Use Mid-span) Splice Bars, 50 Pack (Use With Trays 12" W And Over) Note: Other options available. -8

SOLUTION Zone and Wireless Enclosures 2' x 4' Ceiling Enclosures (85 lb Load Rating) 2' x 4' Ceiling Enclosures create a space within the drop ceiling for consolidation points or active cross

All models have four cable access ports that include foam sealing kits. The active equipment model includes an electrical junction box and internal fan.

office spaces. Wireless enclosures create spaces within the drop ceiling for wireless access points providing added physical security for the access points and the associated network connections.

10 SOLUTION Zone and Wireless Enclosures 2' x 4' Ceiling Enclosures (85 lb Load Rating) 2' x 4' Ceiling Enclosures create a space within the drop ceiling for consolidation points or active cross connects. Ceiling enclosures can be used within an air handling space. A fully hinged access door and internal brackets provide support for 110-style blocks, patch panels or active equipment. All models have four cable access ports that include foam sealing kits. The active equipment model includes an electrical junction box and internal fan. A1224-LP A1224-PP A1224-HR For 110-blocks, 2 x 300-pair For Patch Panels, 2 x 4 RMU For Active Equipment, 2 x 4 RMU Ceiling-Mounted Wireless Enclosures Wireless networks are becoming more common in office spaces. Wireless enclosures create spaces within the drop ceiling for wireless access points providing added physical security for the access points and the associated network connections. Wireless enclosures are easy to install and can be used in air handling spaces to support access points up to 10" W x 8" D x 2" H. Antennas pass through holes on the interchangeable faceplate in the access door providing maximum coverage of the workspace below. The new Universal Faceplate works with most access points providing a 10" L x 1" W slot for antennas. Also available with an electrical junction box. AAT-CAP-UNI-KIT AAT-CAP-00-KIT AAT-CAP-35-KIT AAT-CAP-12-KIT Note: Other styles and sizes available. 10" Enclosure With Universal Faceplate 10" Enclosure With Blank Faceplate 10" Enclosure With CISCO 350 Faceplate 10" Enclosure With CISCO 1200 Faceplate ThinLine II Wall-Mount Cabinet ThinLine II Wall-Mount Cabinet is a low profile wall-mount cabinet that projects less than 12" from the wall. Equipment hangs vertically within the cabinet on adjustable mounting rails. ThinLine II provides an easy way to secure a consolidation point or a small crossconnect. ThinLine II includes an internal 2" x 4" junction box for a power outlet and will support 100 pounds of equipment. There are knockouts for 3/4" and 1/2" conduit and airflow louvers along the sides. The door has a keyed lock and can be hinged to open from the right or left side. An internal ventilation fan is available as an accessory Cabinet, 26" W x 26" H x 5" D, 19" EIA x 2 RMU, Black Cabinet, 26" W x 26" H x 8.5" D, 19" EIA x 4 RMU, Black Cabinet, 26" W x 26" H x 12" D, 19" EIA x 6 RMU, Black Fan For 4 RMU Or 6 RMU Cabinet Fan For 2 RMU Cabinet Note: Other sizes and colors available. -9

EF-Series EuroFrame Gen 2 Cabinet System

Protecting your technology investment. EF-Series EuroFrame Gen 2 Cabinet System The new generation of EF-Series EuroFrame Cabinet is a reliable and economical cabinet solution that supports rack-mount