DRAFT MANUAL. CSSW-91WF 9 x 1 HDMI/Smart Player Switcher. Operation Manual

Transcription

1 DRAFT MANUAL CSSW-91WF 9 x 1 HDMI/Smart Player Switcher Operation Manual

2

3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document. Cypress Technology reserves the right to make improvements to this document and/or product at any time and without notice. COPYRIGHT NOTICE No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means electronic, mechanical, magnetic, optical, chemical, manual, or otherwise without express written permission and consent from Cypress Technology. Copyright 2012 by Cypress Technology. All Rights Reserved. Version VR1.0 January 2012 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit. REVISION HISTORY VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE RDV1 29/06/12 Preliminary Release

5 CONTENTS 1. Introduction Applications Package Contents System Requirements Features Operation Controls and Functions Front Panel Rear Panel Remote Control USB Dongle (Optional Accessory) RS-232 Commands Software Installation and un-installation Uninstall the Computer Software Configuring your application to use the Receiver Smart Phone Easy Connection Access Point Application Connection and Installation Specifications Acronyms... 16

6 1. INTRODUCTION The 9 x 1 HDMI/Smart Player Switcher, allows 8 different HDMI sources to be selected for one HDMI output display and the 9th selection is with USB inputs for user to connect with USB Wi-Fi dongle to become a smart player through PC to TV pc software. Other USB ports are for mouse and keyboard allows aside control at the display end. The HDMI/Smart Player Switcher is designed as a DLNA DMR(Digital Media Renderer) which means users can easy send video/audio and pictures from a computer wirelessly to TV. Also, it can act as a Wi-Fi Access Point for users to access a wired internet connection with their PC/NB or smart phones. The HDMI/Smart Player Switcher is a simple yet incredibly useful device for your HDMI switch and sharing content through network stream. 2. APPLICATIONS HDMI switch up to 8 sources Wireless PC/NB to TV Wireless Smart Phone to TV Wire PC/NB to TV Wi-Fi Access Point(with USB Dongle) 3. PACKAGE CONTENTS HDMI/Smart Player Switcher USB Dongle (Optional) CD Driver Power adaptor Remote Control CR-112 Operation Manual 4. SYSTEM REQUIREMENTS Input HDMI source equipments such as Blu-ray / DVD player and output HDMI monitor with connection cables. In order to run the Smart Player smoothly, please refer to the following hardare recommendation. Desktop/Workstation PC: CPU: Intel Core 2 Duo 2.0G or better 1

7 Chipset: Intel 965 series chipset or better Memory: DDR2-800, 2GB or better Graphic Card: NVIDIA GeForce 8400GS/ATI Radeon X300 or better Network: g/n Wi-Fi and/or 100/1000 Mbps Ethernet Notebook/Laptop PC: CPU: Intel Core 2 Duo 2.0G or better Chipset: Intel 965 series chipset or better Memory: DDR2-800, 2GB or better Graphic: Chipset integrated (Intel X3100 Graphic) or better or NVIDIA GeForce Go 8200M/ATI Radeon Mobility X300 standalone graphic chip or better Network: g/n Wi-Fi and/or 100/1000 Mbps Ethernet Supported OS: Windows 7, x86 and x64 Windows Vista (Swervice Pack 1 or later), x86 and x64 Windows XP (Service Pack 3 or later) 5. FEATURES HDMI, HDCP and DVI compliant Eight HDMI sources to connect up to an HDMI displays Supports CEC bypass Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192kHz Fs sample rate) Supports HDMI input up to 15 meters with 8bits resolution or 10 meters with 12bits resolution and output up to 15 meters with 8/12bits Deep color video up to 12bit, support wide range of PC and HDTV resolutions from VGA to WUXGA (1920x1200 Reduce Blanking) and 480i to 1080p NOTE A. Cable tested with CAT5e/23AWG using cables of another type may result in a different operating distance. B. Figures provided in this manual are reference figures actual only, figures may depend on source and display use with cable specification. 2

8 Supports PC to TV and Smart Phone to TV Can be a Wi-Fi AP (Access Point) Wi-Fi Smart Player is a device that designed as a DLNA DMR (Digital Media Render) device Display various picture, audio and video contents through network streaming USB port for mouse/keyboard 3

9 6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel HDMI SMART PLAYER 8 9 CSSW-91WF 9X1 HDMI/SMART PLAYER SWITCHER HDMI IN 8 STANDBY USB HDMI input buttons and LEDs Press the number buttons to select input source from 1~9, LED will illuminate accordingly with the selection. 2 IR window This IR window accept only the IR signal of the remote control included in the package. 3 HDMI INPUT 1 Connect to the source equipment such as Blu-ray/DVD player for signal sending on to HDMI output display. 4 USB Port This slot is to connect with Wi-Fi module 5 POWER button & STANDBY LED Press this button to switch ON or set the device to standby mode. 4

10 6.2 Rear Panel RS232 USB ETHERNET HDMI IN HDMI OUT DC 5V USB Ports These slots are to connect with USB devices such as keyboard and mouse for aside control at the display side. 2 ETHERNET Connect this port to an active Ethernet connection for a wire connection of Smart Player function. 3 HDMI INPUT 2~8 Connect to the source equipment such as Blu-ray/DVD player for signal sending on to HDMI output display. 4 HDMI OUTPUT Connect to HDMI TV/monitor for input signal display. 5 RS-232 Connect from PC/NB for control the device through the RS-232 command with D-Sub 9pin cable. 6 DC 5V Plug the 5V DC power supply into the unit and connect the adaptor to AC wall outlet. 5

11 6.3 Remote Control 1 Power Press this button to switch on or set the device to standby mode. SMART PLAYER SMART PLAYER 9 Press this button to switch input source from USB dongle for Wi-Fi or Ethernet for wire function of Smart Player. 3 1~8 Press these keys to switch in between the source inputs from 1~8 ports CR USB Dongle (Optional Accessory) 1 USB Dongle: Plug this Wi-Fi dongle into the USB port for signal transmission. 6

12 6.5 RS-232 Commands RS232 Commands INP001~INP009 INP999 PWR000 PWR001 PWR999 VER999 Description Input switch from IN1~IN9 Input status Power Standby Power ON Power status F/W Version Baud Rate: bps Data bit: 8 bit Parity: None Stop bit: 1 bit Flow Control: None Note: 1. When the commands reply with CMD000 it means the insert commands has error. 2. Commands does not require a carriage return. 3. Commands are case-sensitive with CAPITAL LETTERS. 7. SOFTWARE INSTALLATION AND UN-INSTALLATION The following sections describe the procedures for installing the PC2TV device s drivers. Insert the provided CD driver into the input source s CD-ROM driver then begin the installation. 7.1 Software Installation Insert the CD driver included in the package and double click on the PC2TV execute file to start the setup process. Browse the folder where the files should be unpacked and click Continue to start Installation. 7

13 InstallShield Wizard will install PC2TV on your input source device and click Next to continue. Add program icons to the program folder. You may type a new folder name or select one from the existing folders list and click Next to continue. 8

14 Press Analysis to evaluate your computer system. The Benchmark Information will show whether or not your computer system is matching with the product requirement. 9

15 After the setup is complete click on Finish and restart your source device. 7.2 Uninstall the Computer Software Follow the steps below to uninstall the PC2TV Software Step 1: Open the Control Panel: Start a Control Panel a Uninstall a program. Step 2: Select PC2TV execute file and click to remove. 10

16 Step 3: Click on Finish to complete the uninstall process. 8. CONFIGURING YOUR APPLICATION TO USE THE RECEIVER Configure your PC or Smart Phone with Ethernet connection, or becoming the internet access point. Keep in mind, however, that the number, thickness and location of walls, ceilings or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background 11

17 RF(radio frequency) noise in your usage area. Step 1: Go to Start > Settings > Control Panel. Double-click the System and Network and Internet Options Icon. From the Options Icon, click the button to connect to the Internet and select Wireless Option to use a wireless network and then choose PC2TV_PRO_ AccessPoint to connect to the Internet. Step 2: Click the PC2TV icon the utility. on the windows desktop, to run Step 3: Click Play to establish computer contents to display. Step 4: Click Stop to disconnect the connection. 8.1 Smart Phone Easy Connection To begin with the Smart Phone connection, the user need to make sure if the Smart Phone support DLNA (Digital Living Network Alliance) function. If the Smart Phone is not supporting DLNA, users can download the DLNA software like SKIFTA or Twonky media from Android market or APP store. Configure your Internet settings form the Smart Phone devices: 12

18 From the Home screen, sweep your finger downward to display the Notification Panel. Touch Wi-Fi to turn Wi-Fi ON. When your phone completes a scan, touch a Wi-Fi network to Select the PC2TV(DMR) for display system -- For non-dlna Smart Phone, users may download and execute softwares like Twonky and Skifta. -- For Samsung DLNA Smart Phone, please execute AllShare software. -- For HTC DLNA Smart Phone, Please execute Connected Media. Note: The Smart Phone s DLNA installation may be vary with different brand and therefore, the instruction above are for reference only. For other DLNA Smart Phone not lists in this user manual, please refer to DLNA Smart Phone user manual or contact your Smart Phone customer help line to start with. 8.2 Access Point Application Before you begin, connect an active Ethernet cable to the Ethernet port of the device. Then you can connect multiple computers or Wi-Fi devices through the CWF-901SF. If your Wi-Fi devices running speed are become slowly, please disconnect some of the links and Wi-Fi devices to release more bandwidth. Configure your Internet settings from the Computer devices: Click on the network connection on the bottom right hand corner and select Cypress Smart Player or Go to Start > Settings > Control Panel. Double-click the System and Network and Internet Options Icon. From the Options Icon, click the button to connect to the Internet and select Wireless Option to use a wireless network and then choose Cypress Smart Player to connect to the Internet. 13

19 CR CONNECTION AND INSTALLATION Internet Modem or Hub/Router PC/NB WI-FI HDMI Smart Phone SMART PLAYER HDMI SMART PLAYER 8 9 CSSW-91WF 9X1 HDMI/SMART PLAYER SWITCHER HDMI IN STANDBY 8 USB USB ETHERNET HDMI IN HDMI OUT DC 5V RS232 CAT5e/6 HDMI x 8 HDMI Mouse Keyboard NB Blu-ray x 8 HDTV Internet Modem or Hub/Router 14

20 10. SPECIFICATIONS Video Bandwidth Input Port Host Interface Output port Extender Port Supports (DLNA DMR) Audio Supports (DLNA DMR) Resolution Supports 225MHz / 6.75Gbps 8 x HDMI, 1 x Ethernet 1 x n Wi-Fi and 100/1000Mbps Ethernet 1 x HDMI 3 x USB (Keyboard and Mouse only) Video WMV, AVI, MPEG-1/2/4, 3GP & MOV with 2CH with bit-rate under 15Mbps LPCM, MPEG-1, WMA, WAV, MPEG-4, AAC, OGG, 3GP & MP3 with 2CH VGA ~ WUXGA@60RB, 480i ~ 1080p DLNA DMR: Up to 1920 x 1080 PC to TV: Up to 1280 x 720 or Up to 1920 x 1080 with Sandy Bridge ESD Protection Human body model: ±8 kv (air-gap discharge) ±4 kv (contact discharge) Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL certified) Dimensions (mm) 56 (W) x 20 (D) x 9 (H)/USB Dongle, 240 (W) x 112 (D) x 84 (H) Weight(g) 8/USB Dongle, 792 Chassis Material Plastic/USB Dongle, Metal Silkscreen Color White/USB Dongle, Black Operating Temperature 0 C ~ 40 C / 32 F ~ 104 F Storage Temperature -20 C ~ 60 C / -4 F ~ 140 F Relative Humidity 20 ~ 90% RH (non-condensing) Power Consumption 6.1W 15

21 11. ACRONYMS ACRONYM COMPLETE TERM 16

22 17

23 18

24 CYPRESS TECHNOLOGY CO., LTD Home page: MPM-CSSW91WF