CMB-672/674/678. Mini Barebone system Intel High Performance Platform Installation Guide Edition /07/30

Transcription

1 CMB-672/674/678 Mini Barebone system Intel High Performance Platform Installation Guide Edition /07/30

2 Document Content: Packing List Product Specification Hardware Installation Packing List: CMB-672/674/678 Chassis x 1 (Including LV-672/LV-674/678 Motherboard) DCP-PSG W AC-DC Adapter x1 Slim FDD Cable x 1 40-pin to 40-pin UDMA IDE Cable x1 (Only CMB-672 and CMB-674 ) SATA Cable x2 PCIE-3P1 x1 IDE to Slim CD-ROM Module x1 (Only CMB-672 and CMB-674 ) CD Driver x1 Raid Driver disc x1 CMB-672/674/678 2

3 Hardware Installation: Motherboard placement JLAN1 JLAN2 CDIN CN_12V PCI-Express SATA CPU Socket NBFAN JFRNT USB CPUFAN SYSFAN JRTC IDE DDRII 1/2 ATX FDD JDOM Components showed is available for CMB-672 only For Connector For Jumper 3

4 ATX CN_IR IDE SYSFAN DDRII 1/2 FDD JFRNT USB JRTC NBFAN SATA Port CN_12V PCI-Express SPDIF CN_AUDIO CPUFAN CN_1394 Mini_PCI Components showed is available for CMB-674 only For Connector For Jumper 4

5 FDD CN_DIO DDRII 1/2 ATX JFRNT CN_IR SYSFAN JAT JRTC S_ATA1~6 CPU Socket PCIE_16X CPUFAN CN_12V Mini-PCI CN_AUDIO JCSEL2 CN_COM2 CN_USB JCSEL1 CDIN Components showed is available for CMB-678 only For Connector For Jumper 5

6 I/O panel: LV-672/LV-674/LV-678 Front: CD-ROM Power Button Reset Button FDD Power LED HD LED USB 6

7 LV-672 Rear: COM Port VGA Lan Port Antenna PCI-E Port COM Port USB IEEE1394 Keyboard Line-Out Line-In Mic Phone Power Supply Mouse 7

8 LV-674 Rear: Lan Port 1/3 VGA 1394 Antenna PCI-E Port COM Port 1/2 Lan Port 2/4 KB/MS USB Power Supply Center Rear Speaker Side Speaker LINE-IN LINE-OUT MIC-IN 8

9 LV-678 Rear: LAN1 LAN2 COM1 Antenna PCI-E Port MS/KB USB Port VGA SPIF Power Supply Center Rear Speaker Side Speaker LINE-IN LINE-OUT MIC-IN 9

10 Chassis Setup procedure: 1. Turn the chassis screws. 2. Push the Chassis shield towards the back then open it

11 3. Turn the holder screws and open it. 4. Be carefully to take the CPU Fan off. 11

12 5. Open the CPU cover and refer the motherboard manual page.16 to install the CPU. (After installed CPU, please remember to install the CPU Fan back ) 12

13 6. Open the Dimm holder then check the pin number to match the socket side well before installing memory module. 7. Press down the memory module then check dimm holder hook well. 13

14 8. Turn the PCI-E port shield s screw and take shield off refer picture A and B. (If you don t install PCI-E card, please direct to Step 11.) NOET: PCIE Card MAX Dimension (L*W*H) 220/110/20mm (A). 14

15 (B) (C) 15

16 9. Put into the PCI-E Card. And Check the connects into the riser card well then turns shield screw. 16

17 10. Take the holder to install HD driver.this holder can install two 3.5 HD driver or four 2.5 HD driver. To refer the picture (a) and (b). (a) 2.5 HD Drive HD Drive 2 (b) 2.5 HD Drive HD Drive 4 17

18 11. Put into HD driver and connect the cable well then turn the HD driver screws. (If you don t have HD driver, please direct to step 12.) 18

19 12. Before Install Floppy. Turn the CD-ROM and Floppy shield screw. (If you don t have floppy,please direct to step 15. ) 13. Take the CD-ROM and Floppy shield off. 19

20 14. Turn the floppy Screws then refer motherboard manual page 21 to connect the floppy cable correctly. 20

21 15. Before Install the CD-ROM. Turn the CD-ROM shield screws and take it off. (If you don t have the CD-ROM, please direct to step 18. ) 16. Insert CD-ROM into the chassis from front panel. 21

22 17. To tighten the CD-ROM and holder screws. 18. To tighten the chassis shield screws well. 22

23 Mini-PCI card Setup procedure(for CMB-672): 1. Turn the mini-pci chassis shield screws. 2. Take mini-pci chassis shield off. 23

24 3. Follow the Idiot-proof design then insert the mini-pci card then press down. 1 Push 2 Press 4. To close mini-pci chassis shield and tighten a screw. 24

25 Contact Information Any advice or comment about our products and service, or anything we can help you please don t hesitate to contact with us. We will do our best to support you for your products, projects and business Taiwan Commate Computer Inc. Address 19F, No. 94, Sec. 1, Xintai 5th Rd., Xizhi Dist New Taipei City, Taiwan TEL FAX Website TUhttp:// TUinfo@commell.com.twUT (General Information) TUtech@commell.com.twUT (Technical Support) Facebook Twitter Commell is a brand name of Taiwan Commate Computer Inc. 25