PB600/H1 BASIC SYSTEM

Transcription

1 PB600/H1 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H1 BASIC SYSTEM PB600/H1 basic configuration Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC CPU RAM MEMORY HARD DISK POWER SUPPLY ETHERNET PORTS OPTIONS Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 256 MB 1 SODIMM module DDR2 PC MB 1 SODIMM module DDR2 PC GB 1 SODIMM module DDR2 PC GB 2 SODIMM modules DDR2 PC4300, 1 GB each No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer V/AC 140W, autoranging 18 36V/DC 140W, autoranging 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 2: For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 2006 PB600/H1 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case DIN rail mount Overall dimensions & weight See details on the rear Motherboard "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Video controller Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan Video memory (shared) 64/128 MB selectable in system setup RAM memory sockets 2 x SODIMM modules, 200 pin RAM memory DDR2-533 type PC4300 low profile Minimum system memory 256 MB Maximum system memory 2 GB Mass storage interfaces 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 Solid State Disk interface 1 x Compact Flash type II slot, rear access On-board options predisposition Additional serial port (3rd) predisposition (see OPTIONS) Bus expansions slots Not available Rear access interfaces 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector Rear access serial interfaces 2 x RS-232 DB9 male connector Fieldbus interfaces NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 2 at previous page Environmental specifications Operating temperature: C without HDD, C with HDD Storage temperature: C Humidity: 80% (non-condensing) Standard warranty 12 months + 1 month exemption warranty management by ASEM headquarters

2 PB600/H1 PB600/H1-TE OVERALL DIMENSIONS (mm) FRONT VIEW REAR VIEW SIDE VIEW Weight 4.8kg

3 PB600/H3 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H3 BASIC SYSTEM PB600/H3 basic configuration Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 2 slots PCI CPU RAM MEMORY HARD DISK POWER SUPPLY EXPANSION SLOTS ETHERNET PORTS FDD/CD/DVD REAR ACCESS OPTIONS Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 256 MB 1 SODIMM module DDR2 PC MB 1 SODIMM module DDR2 PC GB 1 SODIMM module DDR2 PC GB 2 SODIMM modules DDR2 PC4300, 1 GB each No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 160GB 3.5" SATA 7200rpm, 8 MB buffer V/AC 140W, autoranging 18 36V/DC 140W, autoranging 2 x PCI half size on riser card 2 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 1 x PCI, 1 x PCI-Express x1 format half size on riser card 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: Standard height (1") FDD can be installed as an alternative to the slim units only 2: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 3: For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 2006 TECHNICAL SPECIFICATIONS: see next page

4 PB600/H3 PB600/H3 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case DIN rail mount Overall dimensions & weight See details on the rear Motherboard "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Video controller Video memory (shared) Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan 64/128 MB selectable in system setup RAM memory sockets 2 x SODIMM modules, 200 pin RAM memory DDR2-533 type PC4300 low profile Minimum system memory 256 MB Maximum system memory 2 GB Mass storage interfaces 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 Solid State Disk interface 1 x Compact Flash type II slot, rear access On-board options predisposition Additional serial port (3rd) predisposition (see OPTIONS) Bus expansions slots 2 x PCI Rear access interfaces 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector Rear access serial interfaces 2 x RS-232 DB9 male connector Fieldbus interfaces NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page Environmental specifications Operating temperature: C without HDD, C with HDD Storage temperature: C Humidity: 80% (non-condensing) Standard warranty 12 months + 1 month exemption warranty management by ASEM headquarters PB600/H3-TE OVERALL DIMENSIONS (mm) FRONT VIEW REAR VIEW SIDE VIEW weight 6.4kg

5 PB600/H4 Embedded & Industrial PCs INTERNATIONAL PRODUCTS AND CONFIGURATIONS PB600/H4 BASIC SYSTEM PB600/H4 basic configuration Intel Celeron M 1.5GHz 256 MB RAM kit HDD 40GB 2.5" SATA No FDD Power supply 220V/AC 4 slots PCI CPU RAM MEMORY HARD DISK POWER SUPPLY EXPANSION SLOTS ETHERNET PORTS FDD/CD/DVD REAR ACCESS OPTIONS Intel Celeron M 1.5 GHz, 400MHz front side bus, 1MB cache socket 478 μfc-pga Intel Pentium M 1.73 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga Intel Pentium M 2 GHz, 533MHz front side bus, 2MB cache socket 478 μfc-pga 256 MB 1 SODIMM module DDR2 PC MB 1 SODIMM module DDR2 PC GB 1 SODIMM module DDR2 PC GB 2 SODIMM modules DDR2 PC4300, 1 GB each No Kit Hard Disk Kit HDD 40GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 60GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 2.5" SATA 5400rpm, 8 MB buffer Kit HDD 80GB 3.5" SATA 7200rpm, 8 MB buffer Kit HDD 160GB 3.5" SATA 7200rpm, 8 MB buffer V/AC 140W, autoranging 18 36V/DC 140W, autoranging 4 x PCI half size on riser card 4 x PCI half size on riser card with predisposition for 32-bit, 512KB max NOVRAM 3 x PCI, 1 x PCI-Express x1 format half size on riser card 2 x 10/100Mbit RJ45 connector 1 x 10/100Mbit, 1 x 10/100/1000Mbps RJ45 connector Kit FDD 3.5" 1.44 MB H=1" white bezel > see annotation 1 Kit CD-ROM E-IDE 24x Slim H=0.5" black bezel Kit COMBO DVD-ROM E-IDE 24x / CD-RW 24x10x24x Slim H=0.5" black bezel Kit DVD-RW E-IDE 8x4x24x10x Slim H=0.5" black bezel Kit FDD 3.5" 1.44 MB Slim + CD-ROM E-IDE 24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + COMBO E-IDE DVD-ROM 24x / CD-RW 24x10x24x Slim H=1" black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW E-IDE 8x4x24x10x Slim H=1" black bezel Additional serial port (3rd) RS-232/422/485 DB15 male connector > see annotation 1 Additional serial port (3rd) RS-232/422/485 RS-422/485 optoisolated DB15 male connector > see annotation 1 Parallel port SPP-EPP-ECP bidirectional DB25 male connector > see annotation 1 Fieldbus module NETCORE > see annotation 2 Warranty extension to 18 months + 1 month exemption on basic system and its variants Warranty extension to 24 months + 1 month exemption on basic system and its variants ANNOTATIONS 1: Standard height (1") FDD can be installed as an alternative to the slim units only 2: Additional serial ports RS-232/422/485 and parallel port can be installed alternatively one to the other only 3: For fieldbus module NETCORE specifications see page 107 of Poducts and Configurations dated November 8th, 2006 TECHNICAL SPECIFICATIONS: see next page

6 PB600/H4 PB600/H4 BASIC SYSTEM TECHNICAL SPECIFICATIONS Case Overall dimensions & weight Motherboard Video controller Video memory (shared) RAM memory sockets RAM memory Minimum system memory Maximum system memory Mass storage interfaces Solid State Disk interface On-board options predisposition Bus expansions slots Rear access interfaces Rear access serial interfaces Fieldbus interfaces Environmental specifications Standard warranty DIN rail mount See details on the rear "All-In-One" type ASEM 921 with watchdog timer, hardware system for temperature and voltage board diagnostics Integrated on-board, VGA standard analog interface (external port) and LVDS digital interface for TFT LCD (internal socket) Simul Scan 64/128 MB selectable in system setup 2 x SODIMM modules, 200 pin DDR2-533 type PC4300 low profile 256 MB 2 GB 1 x FDD 1 x ATA/100 (Master, Slave) 2 x SATA/150 1 x Compact Flash type II slot, rear access Additional serial port (3rd) predisposition (see OPTIONS) 4 x PCI 2 x PS/2 (K/M) 2 x Ethernet 10/100Mbit RJ45 connector 4 x USB (2 x 2.0) standard-a connector 1 x analog VGA DB15 female connector 2 x RS-232 DB9 male connector NETCORE fieldbus module predisposition (see OPTIONS) > see annotation 3 at previous page Operating temperature: C without HDD, C with HDD Storage temperature: C Humidity: 80% (non-condensing) 12 months + 1 month exemption warranty management by ASEM headquarters PB600/H4-TE OVERALL DIMENSIONS (mm) FRONT VIEW REAR VIEW SIDE VIEW Weight 8kg