SpO 2 Upgrade Instructions
|
|
- Cody Phillips
- 5 years ago
- Views:
Transcription
1 SpO 2 Upgrade Instructions M3535A/M3536A HeartStart MRx
2 Notice About This Edition Edition 3 Printed in the USA Publication number M The information in this document applies to the HeartStart MRx product version indicated below. This information is subject to change without notice. Philips shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Edition History Edition Product Version Print Date 1 A.00 December, B.xx and earlier January, B.xx and earlier October, 2005 Medical Device Directive The HeartStart MRx complies with the requirements of the Medical Device Directive 93/42/EEC and carries the 0123 mark accordingly. Authorized EU-representative: Philips Medizin Systeme Böblingen GmbH Hewlett Packard Str Böblingen Germany Canada EMC:ICES-001 Warning Radio frequency (RF) interference from nearby transmitting devices may degrade the performance of the HeartStart MRx. Electromagnetic compatibility with surrounding devices should be assessed prior to using the monitor/defibrillator. Copyright Copyright 2005 Koninklijke Philips Electronics N.V Minuteman Road Andover, MA USA (978) All rights are reserved. Permission is granted to copy and distribute this document for your organization s internal educational use. Reproduction and/or distribution outside your organization in whole or in part is prohibited without the prior written consent of the copyright holder. Use of supplies or accessories other than those recommended by Philips may compromise product performance. THIS PRODUCT IS NOT INTENDED FOR HOME USE. IN THE U.S., FEDERAL LAW RESTRICTS THIS DEVICE TO SALE ON OR BY THE ORDER OF A PHYSICIAN. ii
3 Conventions Used in This Manual This document contains the following conventions: WARNING Warning statements describe conditions or actions that can result in personal injury or loss of life. CAUTION Caution statements describe conditions or actions that can result in damage to the equipment or loss of data. NOTE Notes contain additional information on usage. TIP Tips provide hands-on insight into servicing this product. TEXT represents messages that appear on the display [Softkey] represents softkey labels that appear on the display above or below the button to which they correspond. Abbreviations Name HeartStart MRx Monitor/Defibrillator Abbreviation monitor/defibrillator device iii
4
5 Introduction This document provides instructions for installing the M3530A SpO 2 upgrade on the HeartStart MRx. The intended users of this document are technical personnel who have been trained in the safe and proper servicing of the HeartStart MRx. NOTE You must load the latest software after replacing the SpO 2 PCA if the device is running a software version prior to B.05. See Chapter 6 of the Service Manual for information on ordering the Software Support Tool. If the device is running version A software, you must also replace the Processor PCA. See Chapter 4 of the Service Manual for instructions on replacing the Processor PCA. If you are upgrading the device s software, it is essential that the customer gets the latest Instructions for Use. Make sure the customer has the Readme document, which contains instructions on how to download the latest Instructions for Use from the Philips website ( productdocumentation). Tools Required You will need the following tools: HeartStart MRx Service Manual (M ) Torx T10 and T15 drivers (or Torx driver kit, part number ). T15 driver shaft should be at least 3.5-inches (90 mm) long and less than 0.4-inches (10 mm) in diameter to reach down to recessed case screws. Straight-bladed screwdriver. Straight-tip needle nose pliers or tweezers. Defibrillator Discharge Tool (M ). 1
6 Parts List Parts List The parts included in the M3530A SpO 2 upgrade are listed in the following table: Description Quantity SpO 2 PCA 1 SpO 2 stacking connector 1 M1191A SpO 2 Adult Finger sensor 1 Plastic shield 1 Measurement module panel with SpO 2 port 1 Standoff and washer for measurement module panel 1 T10 screws 2 Label with options key 1 2
7 Install the upgrade by following the steps in this document. The chapter and sections provided are from the HeartStart MRx Service Manual (M ). WARNING Remove all power sources (AC, battery, DC) before opening the device. Failure to do so may allow the device to charge without warning and could result in serious injury or death. WARNING HeartStart service should only be performed by qualified service personnel, in accordance with the HeartStart MRx Service Manual. CAUTION Be sure to work in a static-safe environment. Preparation 1. Open and separate the case. See Opening the Case in Chapter Position the front case Lay the front case on the work surface with the display facing down and the printer in the lower left corner. 3. Disconnect the measurement module panel. a. Disconnect the ECG connector cable from the Processor PCA by releasing the latches at the edges of the connectors. (1) b. Disconnect the ECG Out jack wire from the Processor PCA. (2) 3
8 4. Remove the standoff and washer using a straight-blade screwdriver. (3) 5. Remove the measurement module panel. Lift the module straight up out of its groove in the front case. Figure 1 Measurement module panel removal If you are replacing the Processor PCA, do so now. See Chapter 4 of the Service Manual for instructions. 4
9 Installation 1. Secure the stacking connector to the Processor PCA. Insert the short plug into the J23 socket on the Processor PCA. Make sure it is firmly engaged in the socket. 2. Place the SpO 2 PCA in position. a. Line up the screw holes on the SpO 2 PCA with the standoffs on the Processor PCA. b. Line up the holes on the SpO 2 PCA with the stacking connector on the Processor PCA. Push gently to ensure that the pins on the stacking connector are fully engaged. Figure 2 Installing the SpO 2 PCA Stacking Connector 3. Place the new measurement module panel into position. Align its gasket with the groove in the case and lower the module into position. Be careful not to pinch or crush the soft gasket. NOTE Make sure that you carefully seat the measurement module panel without skewing it or crushing the gasket. 4. Loop the SpO 2 flex circuit through the plastic shield. Figure 3 (1) 5. Connect the SpO 2 PCA. Connect the SpO 2 flex circuit to the SpO 2 PCA. Make sure it slides in all of the way. 6. Place the plastic shield over the SpO 2 PCA and secure. Replace and tighten the two T-10 screws. 5
10 7. Replace the washer and standoff. Figure 3 Connecting the SpO 2 PCA 1 8. Connect the measurement module panel. a. Connect the ECG connector cable to the Processor PCA. Be sure that the connector is properly centered and both latches are locked. b. Connect the ECG Out jack wire to the Processor PCA. 9. Close the case. See Closing the Case in Chapter 4. Affixing the Options Key Label 1. Record the options key from the label. 2. Cut the label along the line. 3. Clean the battery compartment A surface with isopropyl alcohol. Allow it to dry. 4. Peel off the adhesive backing. 5. Affix the label to battery compartment A. 6
11 Install the Software You must load the latest software after replacing the SpO 2 PCA if the device is running a software version prior to B.05. NOTE If you are upgrading the device s software, it is essential that the customer gets the latest Instructions for Use. Make sure the customer has the Readme document, which contains instructions on how to download the latest Instructions for Use from the Philips website ( productdocumentation). 1. Insert the AC power module and a battery (charged to at least 20%) and turn the Therapy Knob to Monitor. 2. Insert the Software Support Tool into the data card slot. 3. Access Service Mode. See Accessing Service Mode in Chapter Select Software Upgrade from the Service Mode Main menu. 5. Press the [Upgrade] soft key. The software is installed on the device. This process takes a few minutes. While the software is being updated, progress messages are displayed and the [Main Service] soft key is disabled. 7
12 CAUTION Be careful not to interrupt the software installation process by removing the power source or turning the Therapy Knob. Figure 4 Installing Software 02 Mar :52 Service. SOFTWARE UPGRADE HeartStart MRx Version B Upgrade: American English Main Service Prev Item Next Item Upgrade 6. When the software installation process is complete, turn the device off and on. 8
13 Enabling Options Once you install software, you need to enable the option. If you enter the options key incorrectly, the device s options will not function. 1. From the Device Info menu, select Options Key. An alphanumeric menu is displayed. Figure 5 Enabling Options 02 Mar :52 Service. DEVICE INFO Model Number: M3535A Serial Number: US Language: American English Options: SpO2, CO2, NB P, Q-CPR Main Service Options: _ Done Cancel Backspace Enter the options key using the Navigation buttons to scroll through the letters and numbers. Press the Menu Select button to complete each selection. Select Cancel or backspace to cancel a selection. When the options key has been entered the corresponding product options are displayed. 3. Select Done when you have finished entering the options key. 4. Check the information on the screen to ensure it is correct. CAUTION Do not clear or change the serial number. If you clear or change the serial number, the options are cleared and you must re-enter the correct serial number and the options key. 9
14 After Installation Run Performance Verification testing as described in Chapter 5 Performance Verification. M Edition 3 October, 2005 *M * *3* 10
Keysight Technologies N9020B MXA Signal Analyzer
Keysight Technologies N9020B MXA Signal Analyzer Analog Baseband IQ Inputs (Option BBA) Upgrade Kit Notice: This document contains references to Agilent. Please note that Agilent s Test and Measurement
More informationInstallation Note. Enhanced Memory Upgrade Kit (Option B72) for Agilent ESA-E Series and ESA-L Series Spectrum Analyzers
Installation Note Enhanced Memory Upgrade Kit (Option B72) for Agilent ESA-E Series and ESA-L Series Spectrum Analyzers Part Number E4401-90498 Supersedes: E4401-90332 Printed in USA July 2005 Notice.
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not
More informationIntelliVue Patient Monitors
Hardware Upgrade Installation Guide IntelliVue Patient Monitors MX400/MX450 Patient Monitoring 1Table of Contents 1 Introduction 5 What is in this Installation Note 6 2 Checking your Tools and Kit Hardware
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein should be construed
More informationEncore XT Manual Gun Upgrade Kit
Instruction Sheet P/N 1600823-01 Encore XT Manual Gun Upgrade Kit 1600834 Introduction Follow these instructions to upgrade your Encore manual spray gun to the improved design of the Encore XT spray gun.
More informationKeysight N9030A Signal Analyzer Option BBA Analog Baseband IQ Inputs Retrofit Kit
Keysight N9030A Signal Analyzer Option BBA Analog Baseband IQ Inputs Retrofit Kit Notice: This document contains references to Agilent. Please note that Agilent s Test and Measurement business has become
More informationInstallation Note. Agilent PSA Series Spectrum Analyzers Secure Memory Erase, Option 117
Installation Note Agilent PSA Series Spectrum Analyzers Secure Memory Erase, Option 117 Part Number E4440-90323 Printed in USA July 2006 Notice. The information contained in this document is subject to
More informationIntelliVue MP20/30. Hardware Upgrade Installation Guide. IntelliVue Patient Monitor MP20/30. Patient Monitoring M B *M B*
IntelliVue MP20/30 Hardware Upgrade Installation Guide IntelliVue Patient Monitor MP20/30 Patient Monitoring M8001-9302B *M8001-9302B* Part Number M8001-9302B 4512 610 06841 Printed in Germany 01/05 1
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide The information in this document is subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not
More informationGPIB-232CT-A IBCL EPROM Installation Guide
NATIONAL INSTRUMENTS The Software is the Instrument Installation Guide GPIB-232CT-A IBCL EPROM Installation Guide This guide describes how to replace the factory-installed EPROM that comes with your GPIB-232CT-A.
More informationInstalling the NEMA 4X Hatch
Installing the NEMA 4X Hatch ET 350 Monitor (Models ET 350R and ET 350L3) and ET 3170 Terminal Intended Use When properly installed using the materials provided, and according to these instructions, the
More informationHeartStart Configure User Guide
HeartStart Configure User Guide About this edition Configure version 3.1 Publication date: December 2012 Document part number: 453564239034 The information in this document applies to the product version
More informationUpgrade Instructions. P/N Revision A. October Printer Terminal Holder * *
Upgrade Instructions P/N 96-08-0 Revision A October 000 480 Printer Terminal Holder P/N 96-08-0 Revision A *96080* Instructions This terminal holder connects the INTERMEC R 600 Series and 700 Series Computers
More informationZ-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly
Replacing the LCD Cable To remove and replace the LCD Cable you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Socket wrench with 10mm socket Removing the Side Panel 1.
More informationWritten By: Walter Galan
Replace a cracked screen on your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 32 INTRODUCTION Use this guide to replace the screen on your iphone 4S. After successfully
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationReplacing the Battery HP t5730 and t5735 Thin Clients
Replacing the Battery HP t5730 and t5735 Thin Clients Copyright 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows
More informationRemoval and Installation 8
Removal and Installation 8 8 Introduction 8-2 Service Calibration Guide to Removal and Installation 8-4 Window 8-8 Covers and Trims 8-12 Rear Tray 8-31 Rear Cover 8-32 Media Lever 8-33 Media Lever Position
More informationSITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions
Introduction 1 Installing/Mounting 2 SITRANS F Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel Hardware Installation Instructions 1/2010 A5E02518333A Revision 04 Legal information Warning notice
More informationInstallation Note ESG Vector Signal Generator E4438C Add Option 005 (Internal Hard Drive) Kit Part Number E
Installation Note ESG Vector Signal Generator E4438C Add Option 005 (Internal Hard Drive) Kit Part Number E4400-60599 NOTICE: In August 2014, Agilent Technologies former Test and Measurement business became
More informationimac Intel 27" EMC 2639 Hard Drive
imac Intel 27" EMC 2639 Hard Drive Replacement Replace the Hard Drive in your imac Intel 27" EMC 2639. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 26 INTRODUCTION Replacing the
More information*E * E E0606
75000 SERIES B Instrument BASIC Installation Note Copyright Agilent Technologies, Inc., 1990-2006 *E1300-90020* E1300-90020 E0606 Manual Part Number: E1300-90020 Printed: June 2006 Edition 1 Rev 2 Microfiche
More informationInstallation Guide. English. HP LaserJet 5, 5M and 5N Printer Duplex Printing Accessory (C3920A)
Installation Guide English HP LaserJet 5, 5M and 5N Printer Duplex Printing Accessory (C3920A) Copyright Hewlett- Packard Company 1996 All Rights Reserved. Reproduction, adaptation, or translation without
More informationSeries 3700 Screw Terminal Assemblies Installation Instructions
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Series 3700 Screw Terminal Assemblies Installation Instructions Introduction This document contains handling
More informationTRC-190 User s Manual
First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide Copyright Information The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing
More informationQuicksilver 606 TR-606 CPU Upgrade
Quicksilver 606 TR-606 CPU Upgrade D650C 128 Installation Guide Social Entropy Electronic Music Instruments TABLE OF CONTENTS WARNINGS... 1 OVERVIEW... 2 WHAT'S IN THE BOX... 3 OPENING THE TR-606 CASE...
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide Copyright Information The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing
More informationSerial ATA Hot Swap Drive Cage Upgrade Kit for: Intel Server Chassis SC5200 Intel Server Chassis SC5250-E
Serial ATA Hot Swap Drive Cage Upgrade Kit for: Intel Server Chassis SC5200 Intel Server Chassis SC5250-E A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/Products Order Number:
More informationQUICK REFERENCE. Using the Battery
QUICK REFERENCE This Quick Reference contains supply loading information and general care and maintenance procedures for the Monarch Sierra Sport4 9493 printer. For more detailed information, refer to
More informationTo connect the AC adapter:
Replacing the AC Adapter Replacing the AC Adapter 3 Plug the power cord into a wall outlet. The power indicator turns on. To connect the AC adapter: Connect the power cord to the AC adapter. Power indicator
More informationedrive RAM Battery Alternate Replacement Procedure
edrive RAM Battery Summary This technical note describes the process for replacing the TINI RAM battery with a higher capacity battery. With the edrive turned on, the external battery can be changed without
More informationJLTX Lever and Joystick Replacement Instructions
JLTX Lever and Joystick Replacement Instructions WARNING THE INCORRECT INSTALLATION OF A LEVER OR JOYSTICK CAN CAUSE AN EQUIPMENT MALFUNCTION FAILURE TO FOLLOW THIS PROCEDURE CAREFULLY COULD RESULT IN
More informationPRODUCT MARKING AND BARCODE IDENTIFICATION. up to Serial No Barcode/Label printer MACH4. Service Manual. Edition 11/06
PRODUCT MARKING AND BARCODE IDENTIFICATION up to Serial No. 9999 Barcode/Label printer MACH4 Service Manual Edition 11/06 copyright by cab / 9008553 / Q49 / 1 All specifications about delivery, design,
More informationUpgrading and Servicing Guide
Upgrading and Servicing Guide The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein should be construed
More informationReplacing the RAID Battery Backup Unit Assembly on Series 3 FireSIGHT 3500 Defense Centers, Version 5.x
Replacing the RAID Battery Backup Unit Assembly on Series 3 FireSIGHT 3500 Defense Centers, Version 5.x Last Updated: December 4, 2014 Use these instructions to replace the RAID battery backup unit (BBU)
More informationQ U I C K S T A R T G U I D E
QUICKSTART GUIDE 2 Top 4 5 6 3 13 14 18 19 16 17 12 1 20 7 8 9 10 15 Left Side Front Right Side Back 11 Bottom 1 Power Button 2 Earphone Connector 3 Front-Facing Camera 4 Speaker 5 Ambient Light Sensor
More informationInstallation Note. Source Attenuators and Bias Tees Upgrade Kit. For E8362B/C PNA Series Microwave Network Analyzers. Network Analyzer Model Number
Installation Note Source Attenuators and Bias Tees Upgrade Kit For E8362B/C PNA Series Microwave Network Analyzers Network Analyzer Model Number Upgrade Kit Part Number E8362B/C E8362-60115 Agilent Part
More informationDell Inspiron Mini 10 RAM Replacement
Upgrade or replace RAM to boost speed and performance. Written By: Danielle Jarecki ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide will give step-by-step instructions on how to
More informationPrintPAD MC65. User Guide
110288 000 PrintPAD MC65 User Guide TABLE OF CONTENTS PrintPAD MC65 Printer Views...1 Open View...1 Closed View...1 Using Batteries: General Guidelines...1 Installing and/or Replacing Batteries...2 Charging
More informationContents. Text Notations. Copyright. Using the digitizer pen (Optional) 10. Contents 3. Basic Items 4. Using the Slate PC Dock (Optional) 11
Contents Contents 3 Basic Items 4 Overview 5 Setting up the computer 8 Using the digitizer pen (Optional) 10 Using the Slate PC Dock (Optional) 11 Using the Bluetooth Wireless Keyboard (Optional) 14 Text
More informationInstallation Guide. Retrofit Kit for USB Ready Intraoral Systems
Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the
More informationRM-937, RM-938, RM-939, RM-940 (AT&T)
Service Manual for L1 and L2 Nokia Lumia 1520 RM-937, RM-938, RM-939, RM-940 (AT&T) Key features 5.98" ClearBlack display 2GB RAM 32 GB Internal mass memory (16 GB AT&T) 20 MP camera Wireless charging
More informationManual 04 - Logic Board
Manual 04 - Logic Board Written By: Josh Patterson 2017 guides.cellphonesandbox.com Page 1 of 16 TOOLS: Technician Starter Package (1) 2017 guides.cellphonesandbox.com Page 2 of 16 Step 1 Removal 1 - Battery
More informationInstructions for SVC-KIT-0020
Kaleidescape, Inc. July 22, 2010 Instructions for SVC-KIT-0020 Title Time to complete 1U Server Power Supply Replacement 1 hour Procedure to complete Locate Parts and Tools Service Kit Parts Power supply
More informationMacBook Air 13" Mid 2011 I/O Board
MacBook Air 13" Mid 2011 I/O Board Replacement Replace the I/O board on your MacBook Air 13" Mid 2011. The I/O board houses the MagSafe DCin port, a USB socket, and the headphone jack. Written By: Andrew
More informationMotorola Moto Z2 Play Audio Jack Replacement
Motorola Moto Z2 Play Audio Jack Replacement How to replace your Moto Z2 Play's audio jack with this guide if you can't hear with headphone or if there are scratching noises. Written By: mitch miller ifixit
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationInstallation Note. Configurable Test Set Upgrade Kit. For PNA Series RF Network Analyzers (E8801A, E8802A, and E8803A) Network Analyzer Model Number
Installation Note Configurable Test Set Upgrade Kit For PNA Series RF Network Analyzers (E8801A, E8802A, and E8803A) Network Analyzer Model Number Upgrade Kit Part Number E8801A, E8802A, E8803A E8801-60103
More informationInstalling the Cisco SFS 3504 Server Switch
CHAPTER 3 This chapter describes how to mount your Cisco SFS 3504 Server Switch on a rack, boot the Cisco SFS 3504 Server Switch, and configure basic services. For advanced configuration information, see
More informationKeysight E6650AU-TRX Module Add
Keysight E6650AU-TRX Module Add Notice: This document contains references to Agilent. Please note that Agilent s Test and Measurement business has become Keysight Technologies. For more information, go
More informationRSA5100B Series Real-Time Signal Analyzers RSA5BUP Option 300 High Performance Real Time Upgrade Instructions
xx ZZZ RSA5100B Series Real-Time Signal Analyzers RSA5BUP Option 300 High Performance Real Time Upgrade Instructions www.tektronix.com *P075105800* 075-1058-00 Copyright Tektronix. All rights reserved.
More informationPeel & Present Option Rev.C
Peel & Present Option 92-2479-01 Rev.C Contents of the Peel & Present Kit This kit contains the following items: Peel and Present Mechanism Assist Roller Bushing Follow the steps below to install these
More information13 MMC for PC Option Modules
Part Number M.1300.8684 MMC for PC Option Modules Manual V3.0 The information in this document is also available in the MMC for PC Hardware Manual. 13 MMC for PC Option Modules 13.1 General The MMC for
More informationDemo Kit Quick Start Guide
Near Field Imaging (NFI) Projected Capacitive Touch Screen Systems Read and understand all safety information contained in this document before using this product. Introduction This is intended to help
More informationPrintPAD MC65. User Guide
110288-000 PrintPAD MC65 User Guide TABLE OF CONTENTS PrintPAD MC65 Printer Views...1 Open View...1 Closed View...1 Using Batteries: General Guidelines...1 Installing and/or Replacing Batteries...2 Charging
More informationElecraft K3 KPA3 Power Connector Replacement Revision B, June 30, 2017 Copyright 2017, Elecraft, Inc. All Rights Reserved
Introduction Elecraft K3 KPA3 Power Connector Replacement Revision B, June 30, 2017 Copyright 2017, Elecraft, Inc. All Rights Reserved The connectors furnishing high current to the KPA3 module have failed
More informationInstalling the A4504A PMC Bridge Adapter and A4509A Expansion Adapter. HP Part No. A Edition E1197 Printed in U.S.A.
Installing the A4504A PMC Bridge Adapter and A4509A Expansion Adapter HP Part No. A4504-90601 Edition E1197 Printed in U.S.A. Hewlett-Packard Co. 1997 Printing History First Printing: November 1997 UNIX
More informationPrint Mechanism Maintenance Kit
Print Mechanism Maintenance Kit Installation Instructions This kit includes the parts and documentation necessary to install the print mechanism maintenance kit in the following printers: ZT0 ZT0 ZT0 Read
More informationReplacement Instructions
imac G5 Inverter, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online
More information2001 Dynojet Research, Inc. All Rights Reserved. CPU Module Installation Guide
2001 Dynojet Research, Inc. All Rights Reserved. This manual is copyrighted by Dynojet Research, Inc., hereafter referred to as Dynojet, and all rights are reserved. This manual, as well as the software
More informationLASERJET ENTERPRISE MFP M630
LASERJET ENTERPRISE MFP M630 Maintenance kit replacement manual M630dn M630f M630z M630h Copyright and License 2014 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation, or translation
More informationWritten By: Andrew Bookholt
Replace a dead logic board in your iphone 4 Verizon. Written By: Andrew Bookholt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 17 INTRODUCTION Use this guide to replace your iphone's logic board. TOOLS:
More informationWARNING ELECTRICAL SHOCK HAZARD
Description Safety Instructions The top-entry sub D9 connector kit is designed for enclosure sizes D1h D8h, E1 E2, and E1h E4h with VLT PROFIBUS DP MCA 101 option. It fits the following drives: VLT HVAC
More informationV5420 Host Card Upgrade Kit for R3082D Quick Start Guide
Quick Start Guide Upgrade kit contents The table below shows the contents of the V5420 Host Card Upgrade Kit (components are not shown to scale). Part Function Pieces V5420 Host Card 1 Host card bracket
More informationREMOTE HEAD ADAPTER INSTALLATION GUIDE
REMOTE HEAD ADAPTER INSTALLATION GUIDE The Remote Head adapter is a valuable accessory for the Uniden BC-780, 785 and 796 scanners. It allows the scanner's control panel to be removed from the radio and
More informationPro-Flo System Digital Controller EPROM Upgrade
Instruction Sheet P/N Pro-Flo System Digital Controller EPROM Upgrade 1. Introduction See Figure 1. The EPROM chips are designed to upgrade your Pro-Flo system digital controller for expanded operation.
More informationINSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE
INSPECTION TOOL Inspection Video Camera with Color LCD Monitor Model: 8802LE,8803LE EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle
More informationPackard Bell Vibe 300 Disassembly Manual
Packard Bell Vibe 300 Disassembly Manual 1 Table of Contents Overview 2 Technician Notes 2 Disassembly Instructions 2 Reassembly Instructions 2 Required Tools 2 Removing the Bottom Cover 3 Removing the
More informationMoto G4 LCD Screen and Digitizer Assembly Replacement
Moto G4 LCD Screen and Digitizer Assembly Replacement Replace a cracked or faulty display as a complete assembly, including the surrounding frame/chassis. Written By: Richard Gonzalez ifixit CC BY-NC-SA
More informationapple Service Source PowerBook G4 Updated 8 July Apple Computer, Inc. All rights reserved.
apple Service Source PowerBook G4 Updated 8 July 2003 2003 Apple Computer, Inc. All rights reserved. apple Service Source Take Apart PowerBook G4 2003 Apple Computer, Inc. All rights reserved. apple PowerBook
More informationTRC-190 User s Manual
User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only
More informationBluetooth Shielding Instructions
Mac mini 2012 Bluetooth Shielding Instructions 1 INTRODUCTION 1.1 STATIC PRECAUTIONS 1.2 TOOLS REQUIRED 2 DISASSEMBLY 3 SHIELDING 4 FAQ 4.1 FAQ 5 CUSTOMER SERVICE 5.1 Before Contacting Customer Service
More informationSun StorageTek. 1U Rackmount Media Tray Reference Guide. Sun Doc Part Number: Second edition: December 2007
Sun StorageTek nl 1U Rackmount Media Tray Reference Guide Sun Doc Part Number: 875 4297 10 Second edition: December 2007 Legal and notice information Copyright 2007 Hewlett Packard Development Company,
More informationEscrito por: Andrew Bookholt
Replace the exterior metal silent switch on your Verizon iphone 4. Escrito por: Andrew Bookholt ifixit CC BY-NC-SA es.ifixit.com Página 1 de 23 INTRODUCCIÓN Use this guide to replace the external metal
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More informationKeysight Add Source and Receiver Attenuators Upgrade Kit
Keysight Add Source and Receiver Attenuators Upgrade Kit To Upgrade PNA N5221A or N5222A Option 401 to Option 417 Upgrade Kit Order Numbers: N5221AU-417 or N5222AU-417 Keysight Kit Number: N5222-60107
More informationInstallation Note. Agilent ESG and ESG-D Series Signal Generators Add Option 1E5 Upgrade Kit Kit Part Number E
Installation Note Agilent ESG and ESG-D Series Signal Generators Add Option 1E5 Upgrade Kit Kit Part Number E4400-60032 Part Number E4400-90111 Supersedes: July 1998 Printed in USA September 2001 Notice.
More informationRemoving and Replacing Parts
Removing and Replacing Parts Preparing to Work Inside the Computer Recommended Tools Screw Identification System Components Hard Drive Fixed Optical Drive Media Bay Devices Memory Modules Mini PCI Card
More informationInstallation Note. Removable Hard Disk Drive Upgrade Kit. For All PNA Series RF Network Analyzers. Network Analyzer Model Number
Installation Note Removable Hard Disk Drive Upgrade Kit For All PNA Series RF Network Analyzers Network Analyzer Model Number E8356A, E8357A, E8358A E8801A, E8802A, E8803A N3381A, N3382A, N3383A Upgrade
More informationMemory (RAM) Replacement Instructions. apple PowerBook (FireWire) Tools Required. Electrostatic Discharge (ESD)
apple PowerBook (FireWire) Memory (RAM) Replacement Instructions Be sure to follow these instructions carefully. Failure to follow these instructions could result in damage to your equipment and may void
More informationiphone 4 Verizon Headphone Jack Cable Replacement
iphone 4 Verizon Headphone Jack Cable Replacement Replace a broken headphone jack cable that contains the upper microphone as well as the electronic portions of the volume buttons and silent switch on
More informationiphone 4 Verizon Earpiece Speaker Replacement
iphone 4 Verizon Earpiece Speaker Replacement Replace a blown-out earpiece speaker in your iphone 4 Verizon. Written By: Andrew Bookholt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 18 INTRODUCTION Use
More informationKeysight Second Source, Combiner, and Mechanical Switches Upgrade Kit
Keysight Second Source, Combiner, and Mechanical Switches Upgrade Kit To Upgrade PNA-X N5241A, N5242A, or N5249A Option 419 to Option 423 Upgrade Kit Order Number: N5241AU- 927, N5242AU- 927, and N5249AU-
More informationimac Intel 27" Retina 5K Display CPU Replacement
imac Intel 27" Retina 5K Display CPU Replacement Replace or upgrade the CPU in your imac Intel 27" Retina 5K Display. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com Page 1 of 36 INTRODUCTION
More informationDell Latitude V710/V740 Service Manual
Dell Latitude V710/V740 Service Manual Dell Latitude V710/V740 Service Manual Before You Begin Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification System Components
More informationRFID Ready Option Rev.C
RFID Ready Option 92-2499-01 Rev.C Overview This document describes the contents and installation of the M-Class Mark II RFID options. Only qualified service personnel should perform this installation.
More informationReplace the edrive TINI Module and Battery
Product All edrive Configurations Special Information INFORMATION: This service bulletin is for informational purposes only. It is intended for use by Northrop Grumman Cutting Edge Optronics (NG CEO) employees
More informationWall-Mounting your HP TouchSmart. User Guide
Wall-Mounting your HP TouchSmart User Guide The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein
More informationCINTENNA ANTENNA REPAIR GUIDE
The Cintenna is a great tool when looking to transmit WIRELESS DMX data over obstacles or hard to reach places. Wireless DMX can have its issues when not having a good line of sight between the transmitter
More informationSamsung Galaxy S10 Motherboard
Samsung Galaxy S10 Motherboard Replacement This guide shows how to remove the motherboard for the Galaxy S10. This assembly includes the USB-C charging port. Written By: Arthur Shi ifixit CC BY-NC-SA www.ifixit.com
More informationMacBook Pro 15" Core Duo Model A1150 Keyboard Replacement
MacBook Pro 15" Core Duo Model A1150 Keyboard Replacement Written By: irobot ifixit CC BY-NC-SA www.ifixit.com Page 1 of 16 INTRODUCTION This guide shows the hidden screws you must remove when replacing
More informationNote: Clean Work area of all or any debris after Repair.
Scope: Details: Required Tools For Reference when repairing the: Display / Assembly Replacement ESD Strap (From Kit): Phillips #00 Screwdriver Tweezers Plastic Spudger Plastic Opening Pick Personal Protective
More informationA-dec 570L Dental Light on a DCS System INSTALLATION GUIDE
A-dec 570L Dental Light on a DCS System INSTALLATION GUIDE C ONTENTS Choose an Installation Guide...... Before You Begin.............. 3 Disconnect the Light Cable........ 3 Cut the Light Cable............
More informationInstallation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V C30B and V T40B.
Vision OPLC Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V290-19-C30B and V290-19-T40B. General Description Vision OPLCs are programmable
More informationMotion LE1700 Tablet PC Hard Disk Drive Upgrade Procedure
Motion LE1700 Tablet PC Hard Disk Drive Upgrade Procedure 2008 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document may be reproduced
More informationhp uninterruptible power system r12000 xr models installation instructions
hp uninterruptible power system r000 xr models installation instructions Overview These instructions show how to install an uninterruptible power system (UPS). For detailed information about the UPS, refer
More informationModel 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit
More informationCONTENTS. 1. Motherboard installation Install 5¼ and 3½ drives Install PCI components Case fan setup...5
USER S MANUAL CONTENTS 1. Motherboard installation...1 2. Install 5¼ and 3½ drives...3 3. Install PCI components...4 4. Case fan setup...5 5. Connect case leads to motherboard...6 6. Identify the power
More information