Digital O.R.P. Transmitter Type 8206
|
|
- Marilynn Tate
- 5 years ago
- Views:
Transcription
1 Advantages / Benefits Design Compact O.R.P. Transmitter Type 8206 The O.R.P. transmitter compactly combines an O.R.P. sensor and an electronic with display in splash-proof plastic NEMA 4 (IP 65) enclosure. The sensor component consists of a replaceable combination O.R.P. electrode, screwed into the sensor housing. The measured signal is conveyed to the controller via a coax plug. The transmitter component converts the measured signal and displays the actual value. Compact version for fitting Types S020 and 1500 / Separated O.R.P. transmitter Type 8206 The O.R.P. transmission system combines a O.R.P. sensor Type 8200 and a separate O.R.P. transmitter Type 8206 with display. The 8206 separate transmitter is available in panel mounted version and in a wall mounted plastic NEMA 4 (IP65) enclosure for connection to the O.R.P. sensor Type 8200 for short distance (max. 15 ft). O.R.P. Sensor Type 8200 A wide range of O.R.P. sensors with different characterized electrodes and process connection types offers large capabilities of mounting and O.R.P. measurement. Remote indication with separated transmitter device for wall or panel mounting connected over coaxial cable with O.R.P. sensor 8200 for distances up to 15 feet. Sensor Type 8200 is used for mounting on different fitting types as S020, 1500 / 1501, TriClamp or sanitary versions. Easy System integration by Easy LINK provides low cost of ownership Programmable O.R.P. transmitter for easy O.R.P. measuring system solutions Compact version with integrated O.R.P. electrodes Remote version with separated controller away from the sensor for short and long distances Large range of process connections with different fittings as threads, Triclamp or sanitary versions Easy commissioning due to multi language, menuguided operation Easy processing by 4-20 ma output signal, two relay outputs Individual adjustment of all measuring ranges For use in both pipes and tanks installed in custom fittings and submersion kits approval Application O.R.P. measurements Waste engineering Water treatment and process technology Cooling water monitoring Swimming pool engineering Chemical dosing Electroplating Burkert Contromatic USA 2602 McGaw Avenue Irvine, CA Tel Fax Burkert Contromatic Inc. 760 Pacific Road, Unit 3 Oakville, Ontario, Canada L6L 6M5 Tel Fax Fluid Control Solutions 1
2 The Easy O.R.P. - Control System ON / OFF Process Control Description Applications: ON / OFF Valve Relays 8206 O.R.P.-Transmitter Neutralization Chemical Dosing Waste Water Processing ON / OFF Valve Relays 8200 O.R.P-Sensor with S020 Fitting 4-20 ma Printer Recorder Continuous Process Control Applications: Description Continuous Control Valve 8206 ORP-Transmitter Water Monitoring Continuous Chemical Dosing Waste Water Treatment 4-20 ma 8200 Sensor with S020 Fitting Easy Connection of Burkert Valve Types Directly with 8206 O.R.P. Transmitter Outputs Principle of Operation The most important part of the O.R.P. or redox transmitter is the redox electrode with its potential selective glass membrane. When the redox electrode is immersed into the solution, an electron exchange occurs between the oxidised and the reduced state of the electrolyte. The generated cell voltage is the redox potential, that is directly proportional to the redox value. The transducer without relay functions in a 2-wire circuit and requires a power supply of VDC. A 4-20 ma standard signal is available as an output signal, proportional to the redox value. The transducer with two additional relays functions in a 3-wire circuit. Limit values are freely adjustable. The compact version as well as the panel- and wall mounted version requires a power supply of VDC. The wall mounted version is also available with VAC power supply. 2
3 Installation The compact O.R.P. transmitter can easily be installed into any Burkert insertion fitting system (S020 or 1500 / 1501) by just fixing the main nut. For the separated transmitter version, a wide range of holders offers large capabilities of mounting and redox measurement. The redox transmission system combines a 8200 O.R.P. sensor with a Burkert fitting type and a separate O.R.P. transmitter Type 8206 with display. The transmitter Type 8206 is available in panel mounted version or in a wall mounted plastic NEMA 4 (IP65) enclosure for short distance (up to 15 feet) connection to the O.R.P. sensor Type Compact Version 8206 Separate Version 8206 O.R.P-Sensor 8200 O.R.P.-Transmitter 8206 Distance <15 feet Output Signals Variety of 8200 Sensors with Different Process Connections 8206 Wall- or Panel Mounted Transmitter Pressure-Temperature-Diagram Pressure (PSI) PVDF 6 5 PVC + PP PVDF (PN 6) 4 3 PVC (PN 6) 2 1 PP (PN 6) Temperature F Industrial Immersion Fitting Allows installation into tanks and containers. The following standard lengths are available: 20, 40, 60, 80 inches. Special lengths on request. (dimensions see fittings) Operation / Commissioning Customized adjustments, such as measuring ranges and alarm setpoints can be carried out menu-supported on site via a multi-lingual display. Please consider the respective operating instructions prior to commissioning the devices. 3
4 O.R.P. Electrode The O.R.P-transmitter is available with five different types of standard electrodes. The adjacent chart indicates the appropriate electrode for the respective application. The service life of the O.R.P.-electrode depends on the application. Electrodes in the Type 8206 / 8200 can easily be replaced. How to Select the Most Suitable Redox Electrode 1) Compact Type 8206 Sensor 8200 Applications PLA Easycontrol Oxitrode Waste water samples General aqueous solution Aquariums Beer, juices, wine Butter, compact yogurt, cheese Protein-containing solutions Aqueous emulsions Partly aqueous emulsions Soil, earth suspensions Extreme ph-values (ph<1, ph>13) Hydrofluoric acid containing solutions Galvanic waste water Hot lyes Highly viscous solutions Infusion solutions Solutions with low ion content Jam Cosmetic products Varnish, colors Milk Non-aqueous solutions Oil Ultra pure and rain water Cream, yogurt Brines Swimming pools Soaps, detergents Aqueous suspensions Partly aqueous suspensions Partly aqueous solutions >10% H2O Partly aqueous solutions <10% H2O TRIS buffer solutions most suitable electrode depending on the application 1) Technical Data See: Ordering Data Accessories Note: Flat glass electrode is now available. Please consult engineering for information. 4
5 Operation and Display The operation of the O.R.P. transmitter is classified in the following 3 different menus: Main Menu - Redox potential - Output current - HOLD function - O.R.P. electrode calibration Calibration Menu - Language - Measuring range 4-20 ma - Relay parameter definition - Filter selection Test Menu - Offset - Span - Simulation of redox potential Direction upwards in menu Choice of digit value. Steps from 0 to 9 Direction downwards in menu or sideways for digit selection Relay 1: contact closed Relay 2: contact closed Accept of choosen parameter or adjusted value 5
6 Technical Data General Data Measuring range mv Smallest measuring range on output ma 50 mv Measuring error +/-3 mv, depending on electrode calibration Ambient temperature 32 F to 140 F (0 C to 60 C ) Storage temperature 32 F to 140 F (0 C to 60 C ) Compact Version Pipe Diameter: Stainless Steel: 1/2" to 2" (DN 15 to DN 50) fitting Type S020 21/2" to 4" (DN 65 to DN 100) weld-o-let fitting Type 1500 Brass: 1/2" to 2" (DN 15 to DN 50) fitting Type S020 PVC, PP, PVDF: 1/2" to 2" (DN 15 to DN 50) fitting Type S020 PE, PP, PVDF: 21/2" to 4" (DN 65 to DN 100) weld-o-let fitting Type 1501 Enclosure NEMA 4 (IP65). Relative humidity max. 80% Electronic housing Polycarbonate Front plate Polyester Sensor housing PVDF; O-rings FPM / EPDM Voltage supply VDC Consumption 80 ma (with relays), 20 ma (without relays) Display.6" x 2.4" LCD 8 digits, alphanumeric 15 segments,.35 in. high Analog output signal 4-20 ma programable, proportional to the O.R.P. Load <700 Ω at 30 V; <400 Ω at 24 V; <100 Ω at 15 V Relay output 2 relays 3 A / 230 V; freely adjustable Electrode PLA; glass shaft Diaphragm Zirkon dioxide Reference electrolyte gel Media pressure 0-87 PSI (0-6 bar) Media temperature 32 F to 194 o F (0 C to 90 C) Max. pressure at max. temperature 58 PSI (4 bar) Remote Version Short Distance (<15 feet) Pipe Diameter Stainless Steel: 1-1/4" to 2" (DN 32 to DN 50); fitting Type S020 DN 65 to 100 weld-in; weld-o-let fitting Type 1500 Brass: DN 32 to DN 50; fitting Type S020 PVC, PP, PVDF: DN 15 to DN 50; fitting Type S020 (true union ISO) DN 32 to DN 50; fitting Type S020 (all other versions) DN 65 to DN 100 PE/PP/PVDF-weld-o-let fitting Type 1501 Enclosure Voltage supply Consumption Display Analog output signal Load Relay output Wall mounted version NEMA 4 (IP 65). Rel. humidity max. 80%; ABS Panel version IP 20 (rear plate); NEMA 4 (IP 65) (front plate); PC VDC; (115/230 VAC option wall mounted version) 80 ma (with relays), 20 ma (without relays).6" x 2.4" LCD 8 digits, alphanumeric 15 segments;.35 in. high 4-20 ma programable, proportional to the O.R.P. <700 Ω at 30 V; <400 Ω at 24 V; <100 Ω at 15 V 2 relays 3 A / 230 V; freely adjustable Signal input/connection to sensor 8200 Short distance version (<15 feet): Analog signal input for coaxial cables from O.R.P.-electrode Separate ph-sensor Type 8200 with O.R.P. Electrode Easycontrol Oxytrode Measuring Range mv to 2000 mv mv to mv Housing glass shaft glass shaft Fluid Pressure 0 29 PSI (0-2 bar) PSI (0 16 bar) Fluid Temperature 32 F to 140 F (0 C to 60 C) 32 F to 266 F (0 C to 130 C) Max. Pressure at Max. Temperature 29 PSI (2 bar) 44 PSI (3 bar) Diaphragm ceramic ceramic Reference electrolyte gel special O.R.P. - Sensor Connection Connection G 2" with Union Nut G 1" Sanitary Triclamp Wiring Material-connection size PVC PVC; PP; PVDF; SS SS DN40; DN 50; DN 65 (metric standard) SS 50.5 / 64 (metric standard) coaxial cables for O.R.P.: 6 ft. or 15 ft. 6
7 Dimensions [mm (inch)] Dimensions of the Compact O.R.P. Transmitter Type (4.96") 116 (4.57") 103 (4.06") 170 (6.7") 106 (4.17") NPT G1/21/2 170 (6.7") 106 (4.17") PG /2" NPT 1/2" G1/2 NPT 88 (3.46") 88 (3.46") 88 (3.46") 88 (3.46") Dimensions O.R.P. Transmitter Type 8206 Panel Version Dimensions O.R.P. Transmitter Type 8206 Wall-Mounted Version 7
8 Dimensions [mm (inch)] O.R.P-Sensor Type 8200 for Burkert Fitting Type S020; 1500; 1501 Material: PVC, PP, PVDF, SS Type 8200 O.R.P. -Sensor Type 8200 Short Long ø42 SW G1" NPT1" Rc1" G1" O.R.P.-Sensor Type 8200 Sanitary Connection According to DIN Material: SS (304 or 316Ti) O.R.P-Sensor Type 8200 Triclamp Connection Material: SS (316L) Type 8200 Type 8200 øa øb C øa øb ,2 ø17,2 øa øb C DN DN DN øa øb C 2" DN32 2"1/ DN40 8
9 Fittings Type S020 DN15 50 for Transmitter 8206 or Sensor 8200 with G2"-Connection Variable Dimensions [mm] DN H 1 H2 H3 H Applicable for all fitting materials 1/2" to 2" (DN 15-50) sizes and process connections. True Union - PVC, PP, PVDF Solvent Spigot - PVC, PP, PVDF D øc øa øc B B L1 L3 L E L2 True Union Remote Version Short Distance Solvent Spigot B øa L øc L1 L3 DN D L2 E DIN ANSI JIS (DIN) (ANSI)* (JIS)* (3/4) (1) (1-1/4) (1-1/2) 42.2 (1.66) (2) 48.3 (1.90) (2-1/2) 60.3 (2.37) * only for PVC with true union PVC PP/PVDF PVC PP/PVDF True Union Compact Version Solvent Spigot B øa L øc L1 L3 DN D L2 E DIN ANSI JIS (DIN) (ANSI)* (JIS)* PVC PP/PVDF PVC PP/PVDF (3/4) 21.3 (.84) (1) 26.7 (1.05) (1-1/4) 33.4 (1.31) (1-1/2) 42.2 (1.66) (2) 48.3 (1.90) (2-1/2) 60.3 (2.37) * only for PVC with true union 9
10 Dimensions [mm] - Fittings S020, DN Flange - Stainless Steel Tri-Clamp Connection Acc. ISO 2852 M K N H J D DIN 3202-F1 I E Material: B.S. 316 L Material: B.S. 316 L Variable Dimensions [mm] for Weld Ends, Male Threaded Port, Female Threaded Port, Flange, Tri-Clamp Remote Version Short Distance Weld Ends Length Dimensions Thread Tri- Wall- Clamp DN ø out- thick- A B C D E E F G1 L1 G2 L2 H (DIN) side ness (JIS) (ANSI) G 1-1/ NPT 1-1/ G 1/ Rc 21.0 G 1-1/ NPT 1-1/ M55x Rc 1-1/ G NPT M64x Rc Compact Version Weld Ends Length Dimensions Thread Tri- Wall- Clamp DN ø out- thick- A B C D E E F G1 L1 G2 L2 H side ness (DIN) (ANSI) (JIS) G 1/ NPT 1/ G 3/ Rc 1/ G 3/ NPT 3/ G Rc 3/ G NPT G 1/ Rc G 1-1/ NPT 1-1/ G 1/ Rc 21.0 G 1-1/ NPT 1-1/ M55x Rc 1-1/ G NPT M64x Rc * Flange: DIN 2501/2633, Length According to DIN 3201-F1; ANSI B , Length According to DIN 3201-F1 JIS 10K, Length According to ANSI B16-10 Flange Dimensions Norm* I J K M N DIN x ANSI x JIS x DIN x ANSI x JIS x DIN x ANSI x JIS x Flange Dimensions Norm* I J K M N DIN x ANSI x JIS x DIN x ANSI x JIS x DIN x ANSI x JIS x DIN x ANSI x JIS x DIN x ANSI x JIS x DIN x ANSI x JIS x
11 Dimensions [mm] - Fittings DN Weld-o-Let Fittings With Radius - Stainless Steel Variable Dimensions [mm] Material: 316L (B.S.) DN A R Weld-o-Let Fittings - PE, PP, PVDF Variable Dimensions [mm] DN A PE PP PVDF B C B C B C Immersion Fitting - PP Lengths L: 20, 40, 60, 80 inches Ø 145 Ø 91 L L Ø 75 Ø 104 Ø
12 Ordering Data for O.R.P. Transmitter 8206 A Compact Version of O.R.P. Transmitter Type 8206 Consists of Two Basic Units as Follows: - Fitting Type S020 1/2" to 2" (DN15 to DN50) or 1500/ /2" to 8" (DN65 to DN200) - Compact O.R.P. Transmitter TYPE DESCRIPTION Electrode Gasket ITEM-No ITEM-No ITEM-No Worldwide Standard Worldwide Standard North America Plug, PG 9 1 x PG 13.5 Standard Plug 1/2" NPT O.R.P-transmitter compact 4-20 ma output, no relay, VDC; with Pt1000 Comact O.R.P. Transmitter 8206 PLA FPM K D F Compact O.R.P. Transmitter 8206 PLA EPDM G S S TYPE DESCRIPTION Electrode Gasket ITEM-No ITEM-No Worldwide Standard North America 2 x PG 13.5 Standard O.R.P.-transmitter compact 4-20 ma output; 2 relay outputs; VDC; with Pt x 1/2" NPT Compact O.R.P. Transmitter 8206 PLA FPM L U Compact O.R.P. Transmitter 8206 PLA EPDM Y Y A Separate Version of O.R.P-Transmitter Consists of Five Basic Units as Follows: - Fitting Type S020 1/2" to 2" (DN15 to DN50) or 1500/ /4" to 8" (DN65 to DN200) - O.R.P. Holder - O.R.P. Electrode - Cable for O.R.P. Electrode - O.R.P. Transmitter 8206 Wall- or Panel Mounted Version TYPE DESCRIPTION Pulse output Cable Power supply ITEM-No connection O.R.P. Transmitter Panel Mounted Version for Separate Sensor Type 8200; 4-20 ma Output Panel Mounted Transmitter 8206 Max. 15 ft. to Sensor no clamps VDC U Panel Mounted Transmitter 8206 Max. 15 ft. to Sensor 2 x relay clamps VDC G O.R.P. Transmitter Wall Mounted Version for Separate Sensor Type 8200; 4-20 ma Output Wall Mounted Transmitter 8206 Max. 15 ft. to Sensor no 5 x PG VDC H Wall Mounted Transmitter 8206 Max. 15 ft. to Sensor 2 x relay 5 x PG VDC A Wall Mounted Transmitter 8206 Max. 15 ft. to Sensor no 5 x PG VAC B Wall Mounted Transmitter 8206 Max. 15 ft. to Sensor 2 x relay 5 x PG VAC L 12
13 TYPE DESCRIPTION Material Boring for Protection ITEM-No Connection Tube Sensor O.R.P.-Holder Type 8200 Without O.R.P.-Electrode 8200 short version G1" connection thread PVC no no G 8200 long version G1" connection thread PVC no no W 8200 short version 1"NPT connection thread PVC no no S 8200 long version 1"NPT connection thread PVC no no U 8200 short version RC 1" connection thread PVC no no E 8200 long version RC 1" connection thread PVC no no Y 8200 with G 2" connection for fitting Type S020; 1500; 1501 PVC no no Y 8200 with G 2" connection for fitting Type S020; 1500; 1501 PP no no Z 8200 with G 2" connection for fitting Type S020; 1500; 1501 PVDF no no S 8200 with G 2" connection for fitting Type S020; 1500; 1501 SS no no T 8200 with Triclamp connection DN 32 (dia 50.5 mm) metric SS 316 L no no Y 8200 with Triclamp connection DN 32 (dia 50.5 mm) metric SS 316 L no yes Z 8200 with Triclamp connection DN 40 (dia 64 mm) metric SS 316 L no no U 8200 with Triclamp connection DN 40 (dia 64 mm) metric SS 316 L no yes V 8200 with sanitary connection DN 40 DIN metric SS 304 no no L 8200 with sanitary connection DN 40 DIN metric SS 304 no yes A 8200 with sanitary connection DN 40 DIN metric SS 316 Ti no no H 8200 with sanitary connection DN 40 DIN metric SS 316 Ti no yes B 8200 with sanitary connection DN 50 DIN metric SS 304 no no Q 8200 with sanitary connection DN 50 DIN metric SS 304 no yes N 8200 with sanitary connection DN 50 DIN metric SS 316 Ti no no R 8200 with sanitary connection DN 50 DIN metric SS 316 Ti no yes D 8200 with sanitary connection DN 65 DIN metric SS 304 no no G 8200 with sanitary connection DN 65 DIN metric SS 304 no yes Q 8200 with sanitary connection DN 65 DIN metric SS 316 Ti no no H 8200 with sanitary connection DN 65 DIN metric SS 316 Ti no yes D TYPE DESCRIPTION Material Temperature Pressure ITEM-No ACCESSORIES Range O.R.P. Electrodes 120 mm for Sensor Type 8200 EASYCONTROL +/-2000 mv glass F (0-60 C) 29 PSI C OXYTRODE +/-2000 mv glass F (0-130 C) 232 PSI Z Connection Cables Between 8206 Controller and 8200 Sensor; Short Distance Cable Length O.R.P coaxial cable with standard electrode plug 6 ft H O.R.P coaxial cable with standard electrode plug 15 ft A Gaskets Gasket for all fitting Type 8200 FPM (Viton) G Gasket for all fitting Type 8200 EPDM H Accessories for Tank Installation (Compact Version) Immersion fitting PP 1.5 ft W Immersion fitting PP 3 ft F Immersion fitting PP 4.5 ft G Immersion fitting PP 6 ft D Extension cable for immersion fitting 1.5 ft M Extension cable for immersion fitting 3 ft S Extension cable for immersion fitting 4.5 ft P Extension cable for immersion fitting 6 ft Q Fixing Kit Flange DN65 with SS-screws PP Q 13
14 Ordering Data of Stainless Steel Fittings Type S020 I T E M - No. Diameters Materials Compact Vers. Remote Short Dist. I T E M - No. Diameters Materials Compact Vers. Remote Short Dist. SS - Female G-Threaded Ports DN 15 SS, FPM Y DN 20 SS, FPM Z DN 25 SS, FPM A DN 32 SS, FPM B B DN 40 SS, FPM Q Q DN 50 SS, FPM D D SS - Female NPT-Threaded Ports 1/2" (DN 15) SS, FPM E /4" (DN 20) SS, FPM F " (DN 25) SS, FPM G /4" (DN 32) SS, FPM H H 1-1/2" (DN 40) SS, FPM A A 2" (DN 50) SS, FPM B B SS - Female ISO7 (JIS) Threaded Ports DN 15 SS, FPM L DN 20 SS, FPM M DN 25 SS, FPM J DN 32 SS, FPM F F DN 40 SS, FPM G G DN 50 SS, FPM H H SS- Male G Threaded Ports DN 15 SS, FPM A DN 20 SS, FPM B DN 25 SS, FPM C DN 32 SS, FPM D D DN 40 SS, FPM N N DN 50 SS, FPM P P SS - Weld Ends DN 15 SS, FPM L DN 20 SS, FPM H DN 25 SS, FPM A DN 32 SS, FPM B B DN 40 SS, FPM C C DN 50 SS, FPM D D SS - Tri-Clamp (ISO 2852) DN 15 SS, FPM E DN 20 SS, FPM F DN 25 SS, FPM Q DN 32 SS, FPM R R DN 40 SS, FPM N N DN 50 SS, FPM B B SS - DIN Flanges (DIN 2501) DN 15 SS, FPM C DN 20 SS, FPM D DN 25 SS, FPM E DN 32 SS, FPM F F DN 40 SS, FPM G G DN 50 SS, FPM H H SS - Flanges (JIS 10K) DN 15 SS, FPM J DN 20 SS, FPM K DN 25 SS, FPM L DN 32 SS, FPM M M DN 40 SS, FPM N N DN 50 SS, FPM X X SS - ANSI Flanges (ANSI B ) 1/2" (DN 15) SS, FPM J /4" (DN 20) SS, FPM K " (DN 25) SS, FPM H /4" (DN 32) SS, FPM W W 1-1/2" (DN 40) SS, FPM X X 2" (DN 50) SS, FPM Y Y SS - Weld-o-Let DN 65 SS M M DN 80 SS N N DN 100 SS P P Ordering Data of Brass Fittings Type S020 I T E M - No. Diameters Materials Compact Vers. Remote Short Dist. Brass - Female G-Threaded Ports DN 15 Brass, FPM Y DN 20 Brass, FPM Z DN 25 Brass, FPM S DN 32 Brass, FPM T T DN 40 Brass, FPM U U DN 50 Brass, FPM V V Brass - Female NPT-Threaded Ports 1/2" (DN 15) Brass, FPM E /4" (DN 20) Brass, FPM F " (DN 25) Brass, FPM C /4" (DN 32) Brass, FPM Z Z 1-1/2" (DN 40) Brass, FPM S S 2" (DN 50) Brass, FPM T T Brass - Female ISO7 (JIS) Threaded Ports DN 15 Brass, FPM U DN 20 Brass, FPM V DN 25 Brass, FPM W DN 32 Brass, FPM X X DN 40 Brass, FPM G G DN 50 Brass, FPM H H Brass - Male G/Metric Threaded Ports DN 15 Brass, FPM E DN 20 Brass, FPM T DN 25 Brass, FPM U DN 32 Brass, FPM V V DN 40 Brass, FPM W V DN 50 Brass, FPM X X 14
15 Ordering Data of Plastic Fittings Type S020 I T E M - No. Diameters Materials Compact Vers. Remote Short Dist. I T E M - No. Diameters Materials Compact vers. Remote Short Dist. PVC - True Union DIN DN 15 PVC, FPM J L DN 20 PVC, FPM F V DN 25 PVC, FPM G W DN 32 PVC, FPM H H DN 40 PVC, FPM A A DN 50 PVC, FPM B B PVC - True Union ASTM 1/2" PVC, FPM T /4" PVC, FPM U " PVC, FPM V " 1/4" PVC, FPM W W 1" 3/4" PVC, FPM X X 2" PVC, FPM Y Y PVC - True Union JIS DN 15 PVC, FPM H DN 20 PVC, FPM A DN 25 PVC, FPM Y DN 32 PVC, FPM M M DN 40 PVC, FPM N N DN 50 PVC, FPM P P PVC - Solvent Spigot DN 15 PVC, FPM C DN 20 PVC, FPM D DN 25 PVC, FPM N DN 32 PVC, FPM P P DN 40 PVC, FPM D D DN 50 PVC, FPM S S PE - Weld-o-Let DN PE G G PP - True Union with Threaded Port DN 15 PP, FPM H B DN 20 PP, FPM A Y DN 25 PP, FPM F Z DN 32 PP, FPM U U DN 40 PP, FPM V V DN 50 PP, FPM W W PP - Weld Ends DN 15 PP, FPM X DN 20 PP, FPM Y DN 25 PP, FPM Z DN 32 PP, FPM S S DN 40 PP, FPM B B DN 50 PP, FPM C C PP - Weld-o-Let DN PP L L PVDF - True Union with Threaded Port DN 15 PVDF, FPM R S DN 20 PVDF, FPM E T DN 25 PVDF, FPM F U DN 32 PVDF, FPM G G DN 40 PVDF, FPM H H DN 50 PVDF, FPM A A PVDF - Weld Ends DN 15 PVDF, FPM B DN 20 PVDF, FPM C DN 25 PVDF, FPM M DN 32 PVDF, FPM N N DN 40 PVDF, FPM A A DN 50 PVDF, FPM X X PVDF - Weld-o-Let DN PVDF Q 15
16 Ordering Data for O.R.P. Transmitter 8206 ON/OFF Control 50% Savings In case of special application requirements, please consult for advice. We reserve the right to make technical changes without notice. US_8206_10/00 16
Digital ph-controller
Advantages / Benefits Design Compact ph-controller The ph-controller compactly combines a ph-sensor and a PID-controller with display in a splash-proof plastic NEMA 4 enclosure. The sensor component consists
More informationDigital ph-transmitter. Type Advantages / Benefits. Design. Application
Advantages / Benefits Easy System integration by Easy LINK provides low cost of ownership Programmable ph-transmitter functions for easy ph-measuring system solutions Compact version with integrated ph-electrodes
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationSignet 2552 Metal Magmeter Flow Sensors
Signet 2552 Metal Magmeter Flow s Features Test certificate included Award winning hot-tap magnetic flow sensor up to DN2550 (102 in.) Patented Magmeter technology* Operating range 0.05 to 10 m/s (0.15
More informationGRUNDFOS ALLDOS DATA BOOKLET. Conex DIS-C. Measuring amplifiers and controllers for conductivity measurement 50/60 Hz
GRUNDFOS ALLDOS DATA BOOKLET Measuring amplifiers and controllers for conductivity measurement 50/60 Hz TM042232 if Contents Product features Conex DIS 3 3 Identification Type key,, controller 4 Type key,,
More informationEchotouch, EchoSpan & EchoSwitch Ultrasonic Liquid
Echotouch, EchoSpan & EchoSwitch Ultrasonic Liquid The Echotouch, EchoSpan and EchoSwitch are innovative ultrasonic liquid level sensor families that replace float, conductance and pressure sensors that
More informationGRUNDFOS DATA BOOKLET. Conex DIS-C. Measuring amplifiers and controllers. For conductivity measurement (conductive, inductive)
GRUNDFOS DATA BOOKLET Measuring amplifiers and controllers For conductivity measurement (conductive, inductive) Table of contents 1. Product features 3 Conex DIS 3 Conex DIS-C 3 2. Identification 4 Type
More informationph/orp 3/4-inch Combination ph and ORP Sensor Kits Features and Benefits DATA SHEET Versatile Mounting Styles Low Price High Performance
DATA SHEET 3/4-inch Combination ph and ORP Sensor Kits ph/orp Use the Digital Gateway to make any Hach analog combination ph or ORP sensor compatible with the Hach sc1000 Controller. Features and Benefits
More informationCAPACITIVE: CONTROL CLS2 CLS4 CLS5. Applications liquids / solids liquids / solids solids / granules
CAPACITIVE: CONTROL On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic
More informationLAKEWOOD INSTRUMENTS MODEL 1575e WATER TREATMENT CONTROLLER
LAKEWOOD INSTRUMENTS MODEL 1575e WATER TREATMENT CONTROLLER The Model 1575e uses the latest in microprocessor capability, giving the user a high level of application flexibility. A large illuminated graphics
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationLevel Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. This general purpose, 2-wire, to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open
More informationGEMÜ 723 Motorized ball valve
Motorized ball valve Features High flow rates Low weight Choice of various body materials and connection types Available as shut off or control valve / and /-way versions available The / and/or /-way ball
More informationSITRANS F flowmeters SITRANS F US. Flowmeter SONO 3300/FUS060 4/177. Technical specifications. Overview
Overview The combination of sensor SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and
More informationConductivity Transmitters
Conductivity Transmitters CDTX-90 Series Starts at $ 576 Electronics Only Display in µs, ms, kω, MΩ, ppm (TDS) Simulate Function Programmable Temperature Compensation Relay Options Dual Output Option Allows
More information14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
More informationSono-Trak Transit Time Clamp-on Ultrasonic Flow Meter
A trademark of Spirax Sarco, Inc. Sono-Trak Transit Time Clamp-on Ultrasonic Flow Meter Description Engineered for performance excellence, the Sono-Trak Transit Time ultrasonic meter combines non-invasive,
More informationControl and automatic dosing
Control and automatic dosing For public and residential pools Control Basic and Control Basic Plus Control Basic Next Optima and Optima Next dosing pumps Panels for the galvanic and amperometric control
More informationEchotouch, EchoSpan & EchoSwitch Ultrasonic Liquid
Echotouch, EchoSpan & EchoSwitch Ultrasonic Liquid The Echotouch, EchoSpan and EchoSwitch are innovative ultrasonic liquid level sensor families that replace float, conductance and pressure sensors that
More informationC-Flow Coriolis Mass Flow Meter
Coriolis Mass Flow Meter Application and Features For fluids (e.g. PU components, paints) and gases of high density Suitable for aggressive and contaminated media Measurement of mass flow, density, temperature
More informationLevel sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H
Level measurement Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H KSR data sheet FFG-P, FFG-T, FFG-TP, FLM-H Applications High-accuracy level measurement
More informationCapacitance level switches LS 210 LS 220
KROHNE 03/2001 7.02374.31.00 GR/PRINTO Capacitance level switches Compact switches for liquids, solids, slurry, foam and interface; outstanding performance for a low price Easy to install, no moving parts,
More informationLevel Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. It is intrinsically safe (ATEX, CSA, FM, IECEx, NEPSI), 2 wire, to 20 ma loop powered, ideal for liquids, slurries, and
More informationC200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
More information770MAX Conductivity/Resistivity Sensors THORNTON. Leading Pure Water Analytics
THORNTON Leading Pure Water Analytics - ASTM & NIST Traceable Calibration - Smart Sensor Technology - Two & Four Electrode Designs - NPT & Tri-Clamp Connections 770MAX Conductivity/Resistivity Sensors
More informationFILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane
Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please
More informationSmart Conductivity. Reliable and Accurate Conductivity/Resistivity Measurement. THORNTON Leading Pure Water Analytics
Smart Conductivity THORNTON Leading Pure Water Analytics 770MAX Conductivity/ Resistivity Sensors ASTM & NIST Traceable Calibration Smart Sensor Technology Two & Four Electrode Designs NPT & Tri-Clamp
More information*suitable both for membrane sensors or chlorine open cell
CTRL POOL THE SIMPLE, RELIABLE, COST EFFECTIVE SYSTEMS FOR SMALL POOLS CTRL POOL is a compact system, with single or dual controller and peristaltic dispensers all in one enclosure. CTRL POOL is extremely
More information200CRS Single-Channel Conductivity/Resistivity Measurement System THORNTON. Leading Pure Water Analytics
THORNTON Leading Pure Water Analytics - NIST Traceable Calibration - Two Analog Outputs Standard - Three-Wire Temperature Measurement - Wide Range of Sensor and Cable Selections 200CRS Single-Channel Conductivity/Resistivity
More informationaccurate measurement of compressed air consumption and leakage detection Calibration certificates and continous calibration, OEKD calibration service
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
More informationMiniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
More informationFlexBar HRT Pressure Transmitter
FlexBar HRT Pressure Transmitter 4...0 ma, -wire transmitter, HART communication Some hygienic connections conform to -A standards, FDA demands and EHEDG guidelines Configurable span, unit and damping
More informationFlow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
More informationFamily of Water Cut Analyzers
Phase Dynamics Technology for Precision Measurements Phase Dynamics, Inc. 1251 Columbia Drive Richardson, TX 75081 USA E-Mail sales@phasedynamics.com Tel: 972-680-1550 Fax: 972-680-3262 Family of Water
More informationSIGNET ph/orp Transmitter
SIGNET 8750- ph/orp Transmitter ENGLISH 3-8750.090- D-4/03 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury. Contents.
More informationIndicating Digital Transmitter for Differential Pressure and Flow. Media 6 with LCD Media 6 with LED
Indicating Digital Transmitter for Differential Pressure and Flow Media 6 with LCD Media 6 with LED Application Microprocessor-controlled transmitter for measuring and indicating the differential pressure
More informationFloat Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
More informationProsonic T FMU30. Technical Information
Technical Information Prosonic T FMU30 Ultrasonic Level Measurement Compact transmitters for non-contact level measurement of fluids, pastes and coarse bulk materials Application Continuous, non-contact
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationFlow Measurement SITRANS F US Inline
Overview Function Displays and keypad Operation of the SITRANS FUS060 transmitter can be carried out using: Keypad and display unit HART communicator PC/laptop and SIMATIC PDM software via HART communication
More informationFlow Measurement SITRANS F US Inline
Overview Function Displays and keypad Operation of the SITRANS FUS060 transmitter can be carried out using: Keypad and display unit HART communicator PC/laptop and SIMATIC PDM software via HART communication
More informationPlug & Play Analytical Solutions Making Basic Measurements Easy
easy Line easy Line Plug & Play analytics Complete solution package Easy commissioning & installation Plug & Play Analytical Solutions Making Basic Measurements Easy easy Line A Complete Solution Package
More informationFOR LIQUIDS AND SOLIDS
FOR LIQUIDS AND SOLIDS LEVEL SWITCHES VIBRATING FORK LEVEL SWITCHES O U R P R O F E S S I O N NIVOSWITCH VIBRATING FORK LEVEL SWITCHES MAIN FEATURES and mini compact type Rod extension up to 3 meters (10
More informationExplosion-Proof Gauge Pressure Transmitter
Technology Solutions T EK-B AR 3120A Explosion-Proof Gauge Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More informationMMT330 Series Moisture and Temperature Transmitters for Oil
MMT330 Series Moisture and Temperature Transmitters for Oil Features Continuous online measurement of moisture in oil Ball-valve installation no need to shut down the process or drain the oil Proven Vaisala
More informationInstruction Manual. M Pump Motor Controller. For file reference, please record the following data:
Instruction Manual M Pump Motor Controller For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your
More informationFlow VA 500/
VA 500/ 520 Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) 500 is mounted by means of a standard 1/2 ball valve. During mounting and dismounting the safety
More informationEE771 Series. Flowmeter for compressed air and gases in Industrial Applications. EE771 Compact. EE771 remote probe
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Characteristics C 00 PROP Proportional ball valve based on the C 00
More informationDM28 - Economical Digital Process and Strain Gauge Panel Meters
DM28 - Economical Digital Process and Strain Gauge Panel Meters TRANSDUCERS Easily scaled in any engineering units from -19999 to 99999 Large 18mm (.71 ) high red or green display Front panel MIN, MAX
More informationLevel Transmitter. Table of dimensions see page 4. Total length B Installation length A SW55 Ø 55 Ø 75
Level Transmitter Construction The GEMÜ level transmitter has an immersion tube with reed contacts and a chain of resistors which are triggered by a float with an integrated permanent magnet. A threaded
More informationThis is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
More informationJUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
More informationSignet Conductivity Electrodes
Signet 2839-2842 Conductivity Electrodes Features ± 1% accuracy - Custom calibration certificate provided Dual-threaded Compact electrode length for easy in-line installation in small pipe sizes Triple
More informationAssembly. max Example: 2-wire connection IH More connection types see section electrical connections. Auxiliary voltage.
Guided Level Radar Features Measurement independent of density, temperature, and dust Measurement also possible with foam on the surface Simple, menu-guided on-site operation with four-line plain text
More informationFlow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
More informationLS 5000 series Vibration Level Switch for liquids
Vibration Level Switch for liquids Set-up without adjustment Integrated fault monitoring Unaffected by product variations in density, conductivity, dielectric constant or viscosity Insensitive to foam,
More informationE Q U I C I E N H Y G E U R O P E A N
PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS SERIES 8000-SAN OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE ALL FORMS OF HYGIENIC/ SANITARY CONNECTIONS AVAILABLE VERY STRONG FLUSH MOUNTING DIAPHRAGM
More informationHMT330 Series Humidity and Temperature Transmitters for Industrial Applications
HMT330 Series Humidity and Temperature Transmitters for Industrial Applications The HMT330 transmitter family has the solution for demanding industrial humidity measurements. Six models for demanding industrial
More informationTemperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
More informationLevel sensor for monitoring the level of liquid media
Level sensor MG Level sensor for monitoring the level of liquid media Characteristics Level sensor output 4 20mA or Resistance output in three-wire potentiometer circuit Temperature range: -30 C to 150
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8691 can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationHow to build a Conductivity Measurement System
How to build a Measurement System F B E C D A A Immersion system in open basin B Flow-through system C 1/2 pipe mounted system D 3/4 pipe mounted system E Side-entry system in vessel F Top-entry system
More informationSERIES 8000-SAN PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS DESCRIPTION. OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE
PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS SERIES 8000-SAN OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE ALL FORMS OF HYGIENIC/ SANITARY CONNECTIONS AVAILABLE VERY STRONG FLUSH MOUNTING DIAPHRAGM
More informationOPTISWITCH 6600 C Technical Datasheet
Technical Datasheet Microwave Level Switch for standard hygienic applications Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE CONTENTS
More informationAdapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
More informationSMARTPAT series. Analytical sensors with integrated transmitter technology
SMARTPAT series Analytical sensors with integrated transmitter technology Direct installation in explosive areas (zone 0) Offline configuration and calibration via PACTware (FDT/DTM) with the open standard
More informationF-1000 DIGITAL PADDLEWHEEL FLOWMETER
F-1000 DIGITAL PADDLEWHEEL FLOWMETER F1000 with Machined In-line Fitting High accuracy digital paddlewheel technology with very low pressure drop. 3/8, 1/2, 3/4, 1, 1-1/2, and 2 female pipe threads. Flow
More informationJUMO ecotrans ph 03 Microprocessor transmitter/ switching device for ph/redox voltage and temperature
Page 1/7 JUMO ecotrans 03 Microprocessor transmitter/ switching device for /Redox voltage and temperature with a 2-line LCD for mounting on a 35 mm DIN rail Brief description Depending on the configuration,
More informationSubmersion/Insertion ph/orp Sensors
Instruction Sheet PN 51A-396VP/rev.G January 2011 Models 396VP and 398VP Submersion/Insertion ph/orp Sensors For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/.
More informationHYGROPHIL-F, Moisture Analyzer, Type , -11, -12, -13 series A
HYGROPHIL-F, Moisture Analyzer, Type 5673-10, -11, -12, -13 series A Moisture Measurement in gases and liquids Combined moisture and temperature sensor Multiple channel analyzer, max. 3 sensors can be
More informationOPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES
OPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES N116-19 REV. 10 Water Analytics, Inc. 100 School Street Andover, MA 01810 Tel: (978) 749-9949 (855) 747-7623 Fax: (978) 749-9961
More informationPower/RS 485 Comm. Ultrapure Water
Rouge Monitor A complete Rouge Monitoring System consists of three pieces: Stainless Steel Probe that is inserted into the ultrapure process stream Local E 9020 Rouge Detection Transmitter Remote display
More informationCONTROLLERS. Chemical Injection skids. Water Quality Monitoring Systems cum dosing (WQMSD) Mobile Disinfection/Dosing systems
Chemical Injection skids CONTROLLERS Water Quality Monitoring Systems cum dosing (WQMSD) Mobile Disinfection/Dosing systems Containarised Water Treatment systems CONTROLLERS AND MEASUREMENTS TOUCH controller
More informationTemperature measurement TER8 Front-flush and low-invasive resistance thermometers
Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationFCS PROBE FLOW MONITOR PRODUCT OVERVIEW
FCS PROBE FLOW MONITOR PRODUCT OVERVIEW Mounting Instructions Areas of turbulent flow occur whenever there is a change in the pipe construction (e.g. pipe inlets, pipe outlets, pipe elbows). To avoid an
More informationCombiLyz AFI4 / AFI5 Inductive conductivity transmitter
Main features Range from 500 µs/cm to 1000 ms/cm ll hygienic design Built in graphical display CombiView DFON Very fast temperature compensation Easy and full programmable with FlexProgrammer 9701 FI5
More informationCombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel Pt or Pt sensors, - or -wire DIN A or B (/, /, /) elements ensor tubes Cable sensors
More informationSignet 9900 Transmitter
Signet 9900 Transmitter Member of the SmartPro Family of Instruments Features Panel Mount Field Mount NEW! Modbus Module supports RS485 Serial Modbus Communications Multiple sensor types supported with
More informationTemperature sensors from ifm. Selection guide
Temperature sensors from ifm. Selection guide Temperature sensors www.ifm.com/us WARRANTY years on ifm products Systems for temperature monitoring The optimum solution for every requirement Compact temperature
More informationInCos-P Pressure sensor 20 Pa Pa
InCos-P Pressure sensor 20 Pa... 7.500 Pa Electrical pressure / differential pressure sensors 24 VAC/DC supply voltage, 0...10 V / (0) analogue Compact. Easy installation. Universal. Cost effective. Safe.
More informationFlow. Order number VA 550. Order no. VA 570. Further accessories A_...M_
Order number VA 550 housing High-pressure rig for VA 550 recoended for mounting from 10 to 100 bar Order no. 0695 0550 A_...M_ 0530 1155 Order no. VA 570 Order no. 0695 0570 0695 0571 0695 0572 0695 0573
More informationSeries DiTemp Series SolarTemp. Digital Thermometers
JJ Series DiTemp JJ Series SolarTemp Digital Thermometers DS_Digital_thermometers /7 Without external power supply The SolarTemp and DiTemp series offers remarkable features and performance characteristics
More informationNIVOSWITCH VIBRATING FORK LEVEL SWITCHES
For liquids and solids NIVOSWITCH VIBRATING FORK LEVEL SWITCHES OUR PROFESSION IS YOUR LEVEL LEVEL SWITCHES O U R P R O F E S S I O N I S NIVOSWITCH VIBRATING FORK LEVEL SWITCHES MAIN FEATURES and mini
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationMass Flow Meter (MFM) for Gases
871 Mass Flow Meter (MFM for Gases Type 871 can be combined with Direct flow measurement for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 in MEMS technology High accuracy Short response time
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated
More informationSpecification Sheet (Ref XXXXXX)
Retractex B M Specification Sheet (Ref 243275-XXXXXX) The retractable armature Retractex B M was designed for sanitary applications in biotechnology, food, beverage and pharmaceutical industry. The compact
More informationCombiTemp TFRN/TFRH. Operating instructions. Temperature sensor. Operating Instructions: EN.
EN/2017-04-03 Design and specifications subject to change without notice English page 1 8 Field of application CombiTemp TFRx is a temperature sensor, based on RTD technology, which is designed and produced
More informationLevel switch NS 10/NS 25..-AM
Level switch NS 10/NS 25..-AM Fluidcontrol Oil tanks in lubrication and oil supply systems are often under overpressure compared to the ambient atmosphere. All oil moistened parts of devices mounted externally
More informationTemperature probes 468 Hans Turck GmbH & Co. KG Tel Fax Edition I/
468 Hans Turck GmbH & Co. KG Tel. +49 208 49 52-0 Fax +49 208 49 52-264 Temperature probe a Temperature probes TP series TP series Highest possible flexibility A temperature probe has to be flexible and
More informationDVZ - Vortex Flowmeter and Switch
Measuring Ranges: 0.13-1.2 GPM to 2.7-26 GPM Accuracy: ±2.5 % of F.S. Vortex Shedding Technology with No Moving Parts Ryton Body with Nickel Plated Brass or 316 SS Fittings Outputs: Analog, Frequency,
More informationCombiLyz AFI4 / AFI5 Inductive conductivity transmitter
Main features Range from 500 µs/cm to 1000 S/cm ll hygienic design Built in graphical display CombiView DFON Very fast temperature compensation Easy and full programmable with FlexProgrammer 9701 FI5 split
More informationElectronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
More informationP30-2. Overview. Pressure Transmitter Datasheet. *High Quality* 3 Years Warranty. At a Glance. Function. Application
P30-2 Pressure Transmitter Datasheet At a Glance *High Quality* 3 Years Warranty Premium Pressure Transmitter for gauge and pressure measurement with 3 years warranty High repeatability and long-term stability
More information