incoris Model S and incoris Model L In-House Model Milling only with Sirona inlab

Size: px
Start display at page:

Download "incoris Model S and incoris Model L In-House Model Milling only with Sirona inlab"

Transcription

1 CMW Product Launch CMW Product Launch incoris Model S and incoris Model L In-House Model Milling only with Sirona inlab

2 CEREC Connect Current Process Dentist Laboratory Digital impression Check of the data Receiving data Data processing Data transmisson infinident model production Restorationproduction Restoration milling Restauri Veneering 2

3 Sirona s SLA Models CEREC Connect Models: Tooth colored models Digitally ditched and sectioned Removable model segments Full-arch and quadrant articulators available 3

4 CEREC Connect New Process Dentist Laboratory Digital impression Check of the data Data transmisson Receiving data Data processing infinident model production Model milling inlab MCXL Restorationproduction Restoration milling Restauri 4

5 Means to acquire data for model milling Receive files from digital impressions from CEREC dentists via CEREC Connect Receive files from physical impression scans via ineos Blue (?) Receive files from physical impression scans via 3Shape scanners (?) 5

6 CEREC Connect Cases Received Design Change 6

7 Components of model milling Software (inlab 3D V3.85) Accessories: Instruments (Shaper/Finisher), i h model blocks, baseplates etc. Hardware (inlab MCXL) 7

8 Software inlab 3D V3.85 New design mode: Model MC XL Mode Download digital impression from CEREC Connect portal Possibility to acquire physical impression with ineos Blue Model segments positioned in block in inlab Stack Software and milled out 8

9 Milling the model on the inlab MC XL NOTICE: Only inlab MC XL machines starting with serial number (Feb. 2011) are able to mill models (Patterson did have some that were less than the serial number that were sent back for conversion) Older machines can be upgraded (No Update on Cost, Kit, and Steps) Models milled with the Shaper/Finisher only, not diamond burs Shaper/Finisher to be used with inlab MC XL machines with serial number or higher, or with upgraded machines Shaper/Finisher burs not to be used on ceramic materials 9

10 inlab MC XL starting ti with serial number

11 Machine components inlab MCXL Instruments Tungsten carbide Shaper 25 (Ref ) PD# pcs Retail: $ Finisher 10 (Ref ) PD# pcs Retail: $ Shaper 25: Diameter 2.5mm Have to be inserted into bur set 2 Finisher 10: Diameter 1.0mm Have to be inserted into bur set 1 Shaper 25 Finisher 10 11

12 Machine components inlab MC XL Bur change instrument New torque key without spring New one can be indicated by the red screw Will be used for all instruments Is already part of the pack list of inlab MC XL Torque key New torque key for block chuck Torque 1.6nm Will be used for all materials Already part of the inlab MC XL pack list 12

13 Machine components inlab MCXL New screen New milling chamber screen Prevents milling residue from entering the cooling system of the machine Take out milling residue after each model milling Remains in inlab MC XL for all materials Already part of the inlab MC XL packing list 13

14 Accessories Model blocks incoris Model S and incoris Model L Polyurethane Material 2 sizes: NOTICE: Model S - 65x40x22mm (Ref ) PD# blocks/box Retail: $ Model L - 85x40x22mm (Ref ) PD# blocsk/box Retail: $ Blocks can only be used for milling models Blocks can only be milled with Shaper 25 and Finisher 10 burs 14

15 Accessories Model baseplate quadrant and full arch Quadrant: REF# (100 pcs) PD# Retail: $85.23 Full-Arch: REF# (100 pcs) PD# Retail : $ Quadrant and full arch articulators t Quadrant: REF# (3 pcs + 3 centric stop pins) PD# Retail : $21.19 Full-Arch: REF# (3 pcs + 3 centric stop pins) PD# Retail : $22.24 Model pins REF#: (1000 pcs) PD# Retail: $81.46 All components are already used with CEREC Connect SLA models 15

16 Accessories Pinning tool Pins can be pressed into the model segments Moveable arm can push segments out again Additional functionality for pushing out segments from the model baseplate REF# PD # Retail: $

17 Accessories Pinning tool 17

18 inlab Model Milling Starter Kit 15 x incoris Model S 10 x model base plates quadrant 6 x model base plates full arch 3 x Finisher 10 3 x Shaper 25 1 x model holder full arch 1 x model holder quadrant 2 x packs model pins ~500 pcs. 1 x pinning tool 1 x torque key block clamping 1 x tube support pins Starter kit provides all accessories that a lab needs to start with model milling REF # PD# Proposed RETAIL $782.69

19 From the file to the milled model Preparation of models in the inlab 3D software 19

20 From the file to the milled model Inhalte Choose Model

21 From the file to the milled model Inhalte Chosse Model Cut and clean the model

22 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin

23 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin Align the model

24 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin Align the model Segmentation

25 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin Align the model Segmentation Ditching of the dies

26 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin Align the model Segmentation Ditching of the dies Positioning on the baseplates

27 From the file to the milled model Inhalte Choose Model Cut and clean the model Edit preparation margin Align the model Segmentation Ditching of the dies Positioning on the baseplates Export model

28 From the file to the milled model Positioning of the segments via the inlab Stack software (Note: Must open the stack program,setting, configuration, options, select start in MCXL model mode, OK, Close and then reopen program) 28

29 From the file to the milled model Parallel roughing with Shaper 25 Drilling the pin holes with Finisher 10 Timming of segments with Finisher 10 Selective Finishing process from 3 angles with Finisher 10 + anterior undercuts 29

30 From the file to the milled model Break out of model segments Pinning of the segments Articulate models Mount segments on the base plates 30

31 Splitcast Adapter Plate for Articulation

32 Splitcast Adapter Plate for Articulation

33 Thanks for your attention! Q & A incoris Model S and incoris Model L

CEREC Connect The World s only Network for Digital Dentistry!

CEREC Connect The World s only Network for Digital Dentistry! CEREC Connect The World s only Network for Digital Dentistry! Quadrant cases from CEREC Connect in inlab CEREC Connect TT (Tips and Tricks) Bensheim, Germany August 2009 Quadrant cases from CEREC Connect

More information

inlab CAM 15 FEATURES

inlab CAM 15 FEATURES inlab CAM 15 FEATURES OCTOBER 2015 inlab SW CAM 15 FEATURES 02 inlab CAM 15.0 OCTOBER 2015 SYSTEM REQUIREMENTS inlab 4 PC HW v1.0.1 or higher Recommended monitor resolution 1980 x 1080 NEW LICENSE CONCEPT

More information

MRKOMNM. kéï=~ë=çñw== áåi~ä=pa. réöê~çé=çéëåêáéíáçåi=séêëáçå=pkuu. båöäáëü

MRKOMNM. kéï=~ë=çñw== áåi~ä=pa. réöê~çé=çéëåêáéíáçåi=séêëáçå=pkuu. båöäáëü kéï=~ë=çñw== MRKOMNM áåi~ä=pa réöê~çé=çéëåêáéíáçåi=séêëáçå=pkuu båöäáëü Table of contents Sirona Dental Systems GmbH Table of contents 1 Installation... 4 1.1 General information... 4 1.2 Installing inlab

More information

MPKOMNP. kéï=~ë=çñw== áåi~ä=pt. lééê~íçêdë=j~åì~ä pçñíï~êé=séêëáçå=qko. båöäáëü. Operator's Manual\rSoftware version 4.0

MPKOMNP. kéï=~ë=çñw== áåi~ä=pt. lééê~íçêdë=j~åì~ä pçñíï~êé=séêëáçå=qko. båöäáëü. Operator's Manual\rSoftware version 4.0 kéï=~ë=çñw== MPKOMNP áåi~ä=pt lééê~íçêdë=j~åì~ä pçñíï~êé=séêëáçå=qko båöäáëü \rsoftware version 4.0 = Table of contents 1 Introduction... 11 1.1 Dear Customer,... 11 1.2 Copyright and trademark... 11 2

More information

áåi~ä=`^j=pt pçñíï~êé=séêëáçå=qkpkm

áåi~ä=`^j=pt pçñíï~êé=séêëáçå=qkpkm kéï=~ë=çñw== NMKOMNQ áåi~ä=`^j=pt pçñíï~êé=séêëáçå=qkpkm lééê~íçêdë=j~åì~ä båöäáëü Operator's Manual\rSoftware version 4.3.0 = Table of contents Sirona Dental Systems GmbH Operator's Manual inlab CAM SW

More information

WIELAND Dental Digital Support Milling arch models with Dental Wings

WIELAND Dental Digital Support Milling arch models with Dental Wings D E N T A L WIELAND Dental Digital Support Milling arch models with Dental Wings Table of contents 1. CAD à Dental Wings ModelBuilder... 1 1.1 Creating an order... 1 1.1.1 Editing an order... 1 1.2 Scanning...

More information

pçñíï~êé=réöê~çé=séêëáçå=pkmu= båöäáëü

pçñíï~êé=réöê~çé=séêëáçå=pkmu= båöäáëü `bob` Pa pçñíï~êé=réöê~çé=séêëáçå=pkmu= båöäáëü Contents Contents 1 Installation...5 1.1 General... 5 1.2 System requirements... 5 1.3 Installing the CEREC 3D software... 6 1.4 Activating all milling instruments...

More information

CEREC Premium CEREC Premium Cam Training

CEREC Premium CEREC Premium Cam Training CEREC Premium CEREC Premium Cam Training Premium Software Basics The system, configuration, parameters, and settings menus do not have significant differences from Chairside/inLab. No Generic Machines

More information

áåi~ä=m~êíá~ä=cê~ãéïçêâ

áåi~ä=m~êíá~ä=cê~ãéïçêâ kéï=~ë=çñw== MNKOMNR áåi~ä=m~êíá~ä=cê~ãéïçêâ pçñíï~êé=séêëáçå=nkmkm lééê~íçêdë=j~åì~ä båöäáëü Operator's Manual\rSoftware version 1.0.0 = Table of contents Sirona Dental Systems GmbH Table of contents

More information

inlab Software inlab 16 CAD Software Upgrade Rev 1.1 January 2017 Page 1

inlab Software inlab 16 CAD Software Upgrade Rev 1.1 January 2017 Page 1 System Requirements: Minimum: Sirona inlab 4 PC V3.0.1 with Windows 7 64-bit Recommended: Sirona inlab 4 PC V3.0.1 or 4.0.1 with Windows 7 64-bit inlab 16 will not work on a CEREC computer. Distribution:

More information

MOKOMMU. kéï=~ë=çñw== `bob`=pa. pçñíï~êé=réç~íéi=séêëáçå=pknm= båöäáëü

MOKOMMU. kéï=~ë=çñw== `bob`=pa. pçñíï~êé=réç~íéi=séêëáçå=pknm= båöäáëü kéï=~ë=çñw== MOKOMMU `bob`=pa pçñíï~êé=réç~íéi=séêëáçå=pknm= båöäáëü Table of contents Sirona Dental Systems GmbH Table of contents 1 Installation... 3 1.1 General information... 3 1.2 System requirements...

More information

`bob`=mêéãáìã=`^j=pt pçñíï~êé=séêëáçå=qkrkñ

`bob`=mêéãáìã=`^j=pt pçñíï~êé=séêëáçå=qkrkñ kéï=~ë=çñw= MUKOMNT `bob`=mêéãáìã=`^j=pt pçñíï~êé=séêëáçå=qkrkñ lééê~íçêdë=j~åì~ä båöäáëü Operator's Manual\rSoftware version 4.4 = Table of contents Sirona Dental Systems GmbH Operator's Manual CEREC

More information

Clean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging

Clean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when

More information

MSKOMNM. kéï=~ë=çñw== áåbçë=_äìé. lééê~íáåö=fåëíêìåíáçåë. båöäáëü

MSKOMNM. kéï=~ë=çñw== áåbçë=_äìé. lééê~íáåö=fåëíêìåíáçåë. båöäáëü kéï=~ë=çñw== MSKOMNM áåbçë=_äìé lééê~íáåö=fåëíêìåíáçåë båöäáëü Table of contents Sirona Dental Systems GmbH Table of contents 1 Dear Customer,... 5 2 General information... 6 2.1 Structure of the documents...

More information

SNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25

SNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25 SNOWBOARD RACK KIT P/N 2881251 APPLICATION Pro Ride RMK 155 and 163, Axys RMK 155, 163, and 174 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please

More information

MVKOMMT. kéï=~ë=çñw= `bob`=p. lééê~íáåö=fåëíêìåíáçåë. båöäáëü CEREC 3 START STOP

MVKOMMT. kéï=~ë=çñw= `bob`=p. lééê~íáåö=fåëíêìåíáçåë. båöäáëü CEREC 3 START STOP kéï=~ë=çñw= MVKOMMT `bob`=p lééê~íáåö=fåëíêìåíáçåë båöäáëü CEREC 3 START STOP Operating Instructions CEREC 3 Contents Contents 1 Dear Customer... 6 2 General information... 7 2.1 Structure of the documents...

More information

Ortho 1.0, Connectivity Pack V1.0.0 & Dolphin 11.8 B22 Integration Basics

Ortho 1.0, Connectivity Pack V1.0.0 & Dolphin 11.8 B22 Integration Basics Ortho 1.0, Connectivity Pack V1.0.0 & Dolphin 11.8 B22 Integration Basics 8-10-2015 Below is a short version of the steps required for standard setup of CEREC-Dolphin Integration. Keep in mind that this

More information

páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë

páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë kéï=~ë=çñw= NNKOMNM páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë lééê~íáåö=fåëíêìåíáçåë båöäáëü=erpf Sirona Dental Systems GmbH Contents Contents 1 Dear Customer,... 6 2 General information... 7 2.1 Structure of

More information

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_> 96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5

More information

áåi~ä MRKOMMV lééê~íáåö=fåëíêìåíáçåë kéï=~ë=çñw= båöäáëü This product is covered by one or more of the following US patents:

áåi~ä MRKOMMV lééê~íáåö=fåëíêìåíáçåë kéï=~ë=çñw= båöäáëü This product is covered by one or more of the following US patents: kéï=~ë=çñw= MRKOMMV áåi~ä lééê~íáåö=fåëíêìåíáçåë båöäáëü This product is covered by one or more of the following US patents: US6485305 US6885464 US7010150 US6454629 US6394880 US6614538 US6953383 US6702649

More information

páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë=_äìé

páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë=_äìé kéï=~ë=çñw= MTKOMNN páêçå~=aéåí~ä=`^al`^j=póëíéã áåbçë=_äìé lééê~íáåö=fåëíêìåíáçåë båöäáëü=erpf Operating Instructions Sirona Dental Systems GmbH Table of contents 1 Dear Customer,... 5 2 General information...

More information

3D Printing Splints with the Form 2

3D Printing Splints with the Form 2 FORMLABS APPLICATION GUIDE: 3D Printing Splints with the Form 2 Dental LT Clear Resin is a long term biocompatible material formulated for manufacturing dental splints and retainers. As a rigid material,

More information

`bob`=`çååéåí=pt pçñíï~êé=séêëáçå=qkp

`bob`=`çååéåí=pt pçñíï~êé=séêëáçå=qkp kéï=~ë=çñw== MTKOMNQ `bob`=`çååéåí=pt pçñíï~êé=séêëáçå=qkp lééê~íçêdë=j~åì~ä båöäáëü Operator's Manual\rSoftware version 4.2x = Table of contents Sirona Dental Systems GmbH Table of contents 1 Introduction...

More information

Dia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions

Dia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions Dia Lens Finishing Products & Accessories The best solutions for your finishing laboratory solutions For simple and precise rimless drill mounts DigiDrillDM-50 Rimless Lens Drill The best solution for

More information

TL Laser Systems for Tool Measurement

TL Laser Systems for Tool Measurement TL Laser Systems for Tool Measurement Tool monitoring with a TL laser system is a very flexible solution. The contact-free optical measurement enables you to check even the smallest tools rapidly, reliably

More information

LEICA EM TXP. Target surfacing system

LEICA EM TXP. Target surfacing system LEICA EM TXP Target surfacing system LEICA EM TXP TARGET SURFACING SYSTEM The Leica EM TXP is a unique target preparation device especially developed for cutting and polishing samples prior to examination

More information

Leica EM TXP. Target Surfacing System

Leica EM TXP. Target Surfacing System Leica EM TXP Target Surfacing System Leica EM TXP Target Surfacing The Leica EM TXP is a unique target preparation device especially developed for cutting and polishing samples prior to examina tion by

More information

OPERATING INSTRUCTIONS:

OPERATING INSTRUCTIONS: List OPERATING INSTRUCTIONS: Preparation For Installation, Product Identification Charging The Batteries ing And Adjusting The Lift Mounting Head s Brackets Mounting Clamps And Quick-Locking Arms Installation

More information

ACUTABOV WOOD 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT PAGE

ACUTABOV WOOD 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT PAGE ACUTABOV WOOD PAGE 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT 52 Alpha_PG_09.pdf 52 23/12/08 11:01:44 AM E PAGE 54 TURBOMAX AUGER BITS 55 TURBO-BORE SPADE BITS 56 SHIPPER AUGERS

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm

More information

Exactly tailored to your demands.

Exactly tailored to your demands. CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS HELIODENT Plus EASY INTRAORAL X-RAYING Exactly tailored to your demands. T h e D e n t a l C o m p a n y Above all, the X-ray

More information

Nortel IP Phone Key Expansion Module User Guide

Nortel IP Phone Key Expansion Module User Guide Nortel IP Phone Key Expansion Module User Guide NN10300-011 Document status: Standard Document version: 0604 Document date: 20 October 2006 All Rights Reserved The information in this document is sourced

More information

#redcube. REDCUBE PRESS-FIT REDCUBE PLUG REDCUBE SMD REDCUBE THR

#redcube.   REDCUBE PRESS-FIT REDCUBE PLUG REDCUBE SMD REDCUBE THR #redcube REDCUBE Terminals are the most reliable high-power contacts on PCB level. Low contact resistance guarantees minimum self-heating. Four different designs cover all leading processing technologies

More information

Technical data: Pin Spacing

Technical data: Pin Spacing 282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,

More information

Installation Guide. Retrofit Kit for USB Ready Intraoral Systems

Installation Guide. Retrofit Kit for USB Ready Intraoral Systems Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the

More information

ASXPRESS PLUS Rapid Sample Introduction System Quick Installation Guide

ASXPRESS PLUS Rapid Sample Introduction System Quick Installation Guide ASXPRESS PLUS Rapid Sample Introduction System Quick Installation Guide Manual Part Number 610092 Rev 8 ASXPRESS PLUS Quick Installation Guide You can and should arrange for expert installation of the

More information

Chairside Correlation in CEREC 3D software

Chairside Correlation in CEREC 3D software Chairside Correlation in CEREC 3D software Correlation has been a popular design mode in the CEREC software since CEREC 2. This mode allows the user to copy an existing (or waxed up, etc) occlusion and

More information

Mounting Instructions for MTP Modules

Mounting Instructions for MTP Modules VISHAY SEMICONDUCTORS www.vishay.com Modules By Kevin Liu This application note introduces Vishay s MTP rectifier-switch modules and discusses the assembly and PCB issues involved in their use. MTP modules

More information

TOGETHER DIGITAL WORLD ZAHN DENTAL WE ENTER THE. Exclusively Available from

TOGETHER DIGITAL WORLD ZAHN DENTAL WE ENTER THE. Exclusively Available from TOGETHER WE ENTER THE DIGITAL WORLD Exclusively Available from ZAHN DENTAL TOGETHER WE ENTER THE DIGITAL WORLD. Digital dentistry is transforming the dental industry with increased productivity and integrated

More information

Contracer CV-2100 SERIES 218 Contour Measuring Instruments

Contracer CV-2100 SERIES 218 Contour Measuring Instruments Contracer CV-2100 SERIES 218 Contour Measuring Instruments FEATURES scale improves the Z-axis accuracy and resolution. traverse in column Z-axis for CV-2100M4. onto the X-axis drive unit eliminating wired

More information

COUNTERTOP SAW PARTS Rev Mar2019 IMAGE DESCRIPTION BOLD Part No.

COUNTERTOP SAW PARTS Rev Mar2019 IMAGE DESCRIPTION BOLD Part No. SOLID STATE DIODE LASER ½ Diameter - 635nm, 5 mw, 90 Degree Beam Angle E1009204 SOLID STATE DIODE LASER ¾ Diameter - 10 mw - 3/16 wide beam E1009207 1.5 HP Porter Cable Router Motor 120V [ENDCAP MODIFIED

More information

NEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping

NEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

More information

CFP2(CN121 series) Application Specification

CFP2(CN121 series) Application Specification CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles

More information

Dental System. Basic Course

Dental System. Basic Course Dental System Basic Course This Course Booklet contains notes and workflows to help during your training and can be used later for reference and to help you train others. How to Perform a Workflow for

More information

In-Sight 7000 Series Vision System. Optional Configurations

In-Sight 7000 Series Vision System. Optional Configurations In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms

More information

CLAMPING SYSTEM MACRO

CLAMPING SYSTEM MACRO Тольятти: (8482) 25-82-40, (8482) 25-82-85, (927) 775-49-65, (906) 128-12-68, tlt@ionexedm.ru Москва: (499) 782-61-17, (916) 627-56-24, (926) 300-12-42, msk@ionexedm.ru Томск: (3822) 23-16-80, (909) 543-16-80,

More information

EASTERN LABS. Instructions Model RM /25/2007. Operation. Junction Box Assembly. Different Types of Switch Installations

EASTERN LABS. Instructions Model RM /25/2007. Operation. Junction Box Assembly. Different Types of Switch Installations EASTERN LABS Instructions Model RM-1205 04/25/2007 Operation Junction Box Assembly Different Types of Switch Installations Counter Mounting Suggestions Operation Total Counter Mix Counter Thru counter

More information

da Vinci 1.0 Pro Quick Guide

da Vinci 1.0 Pro Quick Guide US da Vinci 1.0 Pro Quick Guide Product Description Print Parameters Description Support Details Product Model: da Vinci 1.0 Professional da Vinci 1.0 Pro Product Description Product Overview Cartridge

More information

Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer

Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer USER'S MANUAL Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer DEIF A/S Frisenborgvej 33 DK-7800 Skive

More information

NEW IDENTICA T-SERIES

NEW IDENTICA T-SERIES 2017 NEW IDENTICA T-SERIES Identica T-Series 1 What's new in T-series? - Everyone s invited. We designed Identica T-series to meet all of your needs. With a powerful scan engine and affordable pricing,

More information

FortiCam FD40 Mounting Guide

FortiCam FD40 Mounting Guide FortiCam FD40 Mounting Guide 1 FORTINET DOCUMENT LIBRARY http://docs.fortinet.com FORTINET VIDEO GUIDE http://video.fortinet.com FORTINET BLOG https://blog.fortinet.com CUSTOMER SERVICE & SUPPORT https://support.fortinet.com

More information

ED-1100 PORTABLE VARIABLE EDDY CURRENT INSTRUMENT

ED-1100 PORTABLE VARIABLE EDDY CURRENT INSTRUMENT ED-1100 PORTABLE VARIABLE EDDY CURRENT INSTRUMENT EQUIPMENT SPECIFICATION ES-110-1 - 1.0 Description 1.1 The Model ED-1100 is a microprocessor based variable frequency eddy current instrument, with a liquid

More information

ZAVIO Outdoor IR Mini Dome. Quick Installation Guide

ZAVIO Outdoor IR Mini Dome. Quick Installation Guide ZAVIO Outdoor IR Mini Dome Quick Installation Guide 0 Quick Installation Guide Please follow the installation steps below to set up your IP Camera. Check the package contents with the list below. See P.1

More information

Installation Instructions for Installing the Advanced Video Input Board in a D9032 Encoder

Installation Instructions for Installing the Advanced Video Input Board in a D9032 Encoder Installation Instructions for Installing the Advanced Video Input Board in a D9032 Encoder Overview Audience These installation instructions apply to trained Cisco service personnel who want to install

More information

System Description. FINO Semiautomatic Stencil Printer Version 1.1 July 11 th Modification protocol Version

System Description. FINO Semiautomatic Stencil Printer Version 1.1 July 11 th Modification protocol Version FINO Semiautomatic Stencil Printer Version 1.1 July 11 th 2012 Modification protocol Version Date Modification 1.00 29.05.2012 Release 1.01 11.07.2012 Dimension Drawings changed Essemtec AG Mosenstrasse

More information

English. Quick Guide

English. Quick Guide English Quick Guide Specification Product Overview Button and Indicator light Unpacking Accessory Checklist Important Safety Notes Extruder module installation Accessory installation XYZware operation

More information

Quick Start Guide. Preparation. Installation. Operation. Support. Vaisala NOMAD 3 Data Logger. Online manuals

Quick Start Guide. Preparation. Installation. Operation. Support. Vaisala NOMAD 3 Data Logger. Online manuals Quick Start Guide www.vaisala.com Vaisala NOMAD 3 Data Logger Preparation Package Contents Plan Instrumentation Create a SkyServe Account Activating the Nomad 3 Nomad 3 Toolbox Create Setup Files 2 4 5

More information

Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual

Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual Fantasea Blue Ray Tray (Cat. No. 2040, 2045, 2050) Instruction Manual For Illustration- Blue Ray Double Tray with Housing 1 The Fantasea Blue Ray Tray allows integrating different components in an underwater

More information

If looking for the ebook Cadcam manual in pdf form, in that case you come on to right site. We presented complete edition of this book in DjVu, epub,

If looking for the ebook Cadcam manual in pdf form, in that case you come on to right site. We presented complete edition of this book in DjVu, epub, Cadcam Manual If looking for the ebook Cadcam manual in pdf form, in that case you come on to right site. We presented complete edition of this book in DjVu, epub, PDF, doc, txt formats. You may read online

More information

TX-3 TILE SAW OPERATION & PARTS MANUAL

TX-3 TILE SAW OPERATION & PARTS MANUAL www.mkdiamond.com TILE SAW OPERATION & PARTS MANUAL Revision 00 0.09.009 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all

More information

Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.

Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set. Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until

More information

Ultima X5000 Round Duct Mount Kit User Instructions

Ultima X5000 Round Duct Mount Kit User Instructions Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base

More information

OTS optical tool setter (AA version)

OTS optical tool setter (AA version) Data sheet H-5514-8205-01-A OTS optical tool setter (AA version) www.renishaw.com/ots The cableless OTS with optical signal transmission allows unrestricted machine motion and ease of installation on CNC

More information

Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX

Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: 4032689193274 Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling

More information

CS CONNECT. Integrated communication with your lab

CS CONNECT. Integrated communication with your lab CS CONNECT Integrated communication with your lab CS Connect CS Connect is a secure online portal that allows practices to send digital impressions to any laboratory CS Connect can be launched from Carestream

More information

Aspire kit. 80kg, Foot size Maximum Patient Weight: 100kg, Foot size

Aspire kit. 80kg, Foot size Maximum Patient Weight: 100kg, Foot size Aspire kit The Aspire product line is specially designed for emerging markets in Asia and consists of a silicone locking liner, carbon composite foot, and aluminum components. This complete kit solution

More information

Cable Entry Systems for Potentially Explosive Atmospheres

Cable Entry Systems for Potentially Explosive Atmospheres Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating

More information

COBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c

COBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................

More information

IS-DM220/IR/HB IS-DM220

IS-DM220/IR/HB IS-DM220 IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S

More information

HQuad500 Frame Assembly Guide

HQuad500 Frame Assembly Guide HQuad500 Frame Assembly Guide V1.0 June 2015 1 What s Included Kit Content Hardware Bag Content 2 HQuad500 Assembly 2.1 Arm & Motor Mount Sub Assembly 2.2 Landing Gear Step 1 2.3 Center Plates Sub Assembly

More information

Cool Drawer Single Sensor

Cool Drawer Single Sensor The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor

More information

Yesterday. CAD/CAM System

Yesterday. CAD/CAM System Yesterday EN CAD/CAM System CONTACT CONTACT +386 (0)3 425 62 43 SALES +386 (0)3 425 62 12 SERVICE +386 (0)3 425 62 06 INTERDENT d.o.o. Opekarniška cesta 26 3000 CELJE SLOVENIA T: +386 (0)3 425-62-00 F:

More information

OXFORD CAMBRIDGE AND RSA EXAMINATIONS General Certificate of Secondary Education. Additional materials: Formulae Sheet OCR (Tables 2).

OXFORD CAMBRIDGE AND RSA EXAMINATIONS General Certificate of Secondary Education. Additional materials: Formulae Sheet OCR (Tables 2). Candidate Name Centre Number Candidate Number OXFORD CAMBRIDGE AND RSA EXAMINATIONS General Certificate of Secondary Education DESIGN AND TECHNOLOGY (ELECTRONIC PRODUCTS) PAPER 1 FOUNDATION TIER 1953/1

More information

2M IR Mini Dome Quick Installation Guide

2M IR Mini Dome Quick Installation Guide 1 2M IR Mini Dome Quick Installation Guide Please follow the installation steps below to set up 2M IR Mini Dome IP Camera. Check the package contents against the list below. See P.1 Physical overview.

More information

Contracer CV-2100 SERIES 218 Contour Measuring Instruments

Contracer CV-2100 SERIES 218 Contour Measuring Instruments Contracer CV-2100 SERIES 218 Contour Measuring Instruments FEATURES Newly designed high precision digital ARC scale improves the Z-axis accuracy and resolution. Quick release grip handle allows for rapid

More information

Online data sheet. TiM TiM5xx 2D LIDAR SENSORS

Online data sheet. TiM TiM5xx 2D LIDAR SENSORS Online data sheet TiM571-501 TiM5xx TiM571-501 TiM5xx A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Field of application Light source Ordering information Type Part no. TiM571-501

More information

Tube Holders / Support Arms

Tube Holders / Support Arms Tube Holders / Support Arms Anesthetic Tube Holders with flexible rod - adjustable in height, length of support arm: 38 cm - clamp and holder optional according to schema Swivelling universal tube holder

More information

KINAX WT720 absolute, programmable angular postion transmitter

KINAX WT720 absolute, programmable angular postion transmitter For industrial applications in rough environments KINAX WT720 is a robust, absolute angular position transmitter, which is particularly suited to applications in rough environments due to its unique capacitive

More information

CLAMPS & SUPPORTS CATALOG

CLAMPS & SUPPORTS CATALOG ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0

More information

RCC45 ➁ Overview / /

RCC45 ➁ Overview / / RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721

More information

Golf Control Panel Conversion Instructions

Golf Control Panel Conversion Instructions Golf Control Panel Conversion Instructions Document Part #: 040-0079-01 This document describes the steps for upgrading the control panel on an old golf cabinet for use with an EA SPRTS PGA TUR Golf Conversion

More information

CAD2Gcode DXF Writer By Bob Adams

CAD2Gcode DXF Writer By Bob Adams CAD2Gcode DXF Writer By Bob Adams No need to learn CAD To make a part you would sketch your idea on paper first. Then making a drawing using a CAD program. Saving as a DXF file to convert, using a gcode

More information

PoE/FPR Kit for Auto-Sync Time Clock. The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery.

PoE/FPR Kit for Auto-Sync Time Clock. The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery. ASTCPOEK PoE/FPR Kit for Auto-Sync Time Clock The Auto-Sync Time Clock is a validated time system with a Web interface and auto discovery. The ASTCPOEK Kit provides Power over Ethernet with Full Power

More information

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m. Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection

More information

Magnetic probe holders are fully adjustable for more DUT heights and probe styles

Magnetic probe holders are fully adjustable for more DUT heights and probe styles Data Sheet The W4.0 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 4.0 wafers or 4.0 x 6.5 printed circuit board assemblies. This mini probe

More information

DIGITAL INDICATORS S_DIAL

DIGITAL INDICATORS S_DIAL DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed

More information

APS4 Inductive Proximity Sensors

APS4 Inductive Proximity Sensors APS4 Inductive APS4-S-E-D APS4-S-E2-D APS4-M-E-D APS4-M-E2-D Compact x27 mm plastic DC 4 models available Compact polycarbonate housing; comes with mounting plate High-frequency oscillation type DC 3-wire,

More information

TCU-100 microfluidic temperature control

TCU-100 microfluidic temperature control TCU-100 microfluidic temperature control Product datasheet Page Description 2 Benefits 3 Product Specifications 3 Parts List 4 Page 1 of 8 Part No. Part Description # 3200428 Meros TCU-100 1 3200197 USB

More information

HIGH AIRFLOW MID-TOWER CASE INSTALLATION GUIDE

HIGH AIRFLOW MID-TOWER CASE INSTALLATION GUIDE CARBIDE SERIES 740 HIGH AIRFLOW MID-TOWER CASE INSTALLATION GUIDE ! CONGRATULATIONS! CONTENTS Congratulations on your new Carbide Series Air 740. With its Direct Airflow Path design and tons of easy-touse

More information

STEREO MICROSCOPE MODEL K400 / K500 / K700 INSTRUCTION MANUAL

STEREO MICROSCOPE MODEL K400 / K500 / K700 INSTRUCTION MANUAL STEREO MICROSCOPE MODEL K400 / K500 / K700 INSTRUCTION MANUAL Contents 1. Introduction...2 2. Nomenclature and Function....3 3. Assembly.....5 4. Operating the Microscope... 6 4.1 Interpupillary Distance

More information

From Eye to Insight EM RAPID. Pharmaceutical Milling System for Pills

From Eye to Insight EM RAPID. Pharmaceutical Milling System for Pills From Eye to Insight EM RAPID Pharmaceutical Milling System for Pills PHARMACEUTICAL SURFACE PREPARATION 170.0 150 100 50 0-50 -100-150 -170.0-200.0-100 0 100 200.0 Image a The EM RAPID milling system has

More information

Dreamer Series User Manual

Dreamer Series User Manual Dreamer Series User Manual Welcome to the world of the Dreamer. To ensure that you have the best possible user experience, it s important that you follow this user manual. Let s get started! In Parts I

More information

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with

More information

NMKOMNR. kéï=~ë=çñw= áåbçë=ur. lééê~íáåö=fåëíêìåíáçåë. båöäáëü. ineos X5 - Operating Instructions

NMKOMNR. kéï=~ë=çñw= áåbçë=ur. lééê~íáåö=fåëíêìåíáçåë. båöäáëü. ineos X5 - Operating Instructions kéï=~ë=çñw= NMKOMNR áåbçë=ur lééê~íáåö=fåëíêìåíáçåë båöäáëü ineos X5 - Operating Instructions = Table of contents Sirona Dental Systems GmbH Table of contents 1 Dear Customer,... 5 2 General data... 6

More information

PUSH BUTTON PANEL. SECTION 3A (Rev. B) SECTION CONTENTS. Download from Technical Manuals area. sec.3a

PUSH BUTTON PANEL. SECTION 3A (Rev. B) SECTION CONTENTS. Download from  Technical Manuals area. sec.3a SECTION 3A (Rev. B) Download from www.urmet.com Technical Manuals area. SINTHESI 2 CAMERA MODULE AND DOOR UNIT WITH 2 BUTTONS...2 Features...2 Structure...2 Terminals pins description...3 Technical characteristics...3

More information

Cable entry systems for potentially explosive atmospheres

Cable entry systems for potentially explosive atmospheres Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market

More information

CFP2(CN121 series) Application Specification

CFP2(CN121 series) Application Specification CFP2(CN121 series) Application Specification Note All numerical values are in metric units. Dimensions are in millimeters. Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and angles

More information

A-dec 586 Ceiling Monitor Mount

A-dec 586 Ceiling Monitor Mount Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with

More information

3) Mount one screw and nut on bracket.

3) Mount one screw and nut on bracket. The following instructions and pictures are provided to assist you with the installation of the EVGA GTX 1080/GTX 1070 FTW Hybrid Cooling Kit on compatible GTX 1080/GTX 1070 FTW graphics cards. Please

More information