IEI UPS Battery Total Solution

Transcription

1 IEI UPS Battery Total Solution Providing Emergency Power Providing Wide Range DC Power Input A B AFOLUX PPC with Intelligent UPS Module VESA Mount UPS Module UPS Industrial Motherboard c UPS Embedded System ries 00 se M O-ATO ekin 2 2/915 O-910 ekin M A-ATO enov IBX-6

2 AUPS Applications power for certain period of time after a power fail has occurred. IEI AUPS Sub-system Benefit: Provides Continue to provide stable power to equipment during line sags & spikes. Absorb power surges & transients. Smooth out noisy power sources. A.Power Bank Solution AUPS modules act as power input regulator to prevent unstable power input damage and avoid protect against unexpected power loss. B.Mobile System Solution AUPS provides backup power for the data sensitive part of movable equipment, allowing charging and battery replacement of the primary power without shutting down the data terminal. C.Other Relative Applications Production Line Blue Screen Power Fail With AUPS sub-system The IEI Smart Battery is immediately enabled when power failed, and provides stable power so the operator can save important system parameter. Without AUPS sub-system System shuts down or hangs-up suddenly and all data is lost because no backup power is available. Other Fields: Network Surveillance Medical UPS batter y solution-v1.0 ATM Machine Portable Equipment Point of Sale System

3 What is AUPS? AUPS modules act as power input regulator to prevent unstable power input damage and avoid protect against unexpected power loss. What is IEI Complete UPS Solution? 1. Economy 2. Efficiency 3. Easy Management 4. Emergency power backup 1. Economy IEI complete UPS solution equipped with an AUPS sub-system acts as a simple UPS system and provides emergency power when the utility power is not available. IEI motherboard with AUPS sub-system provides wide range DC power input for regulator function to prevent eunstable power input damage, and avoid unexpectedly power lost. Traditional UPS system is combined by expensive charger circuit, huge battery and many complicated cables. OLD + + = Expensive charger board Complicated cables Huge battery UPS The IEI motherboard integrated with on-board battery charger circuit and a smart battery kit can act as a compact and simple UPS system. It is the best choice for those who are looking for a highly reliable industrial system with UPS function. NEW + = AUPS charger on board Wide range DC input Full function motherboard 2.Efficiency AUPS Battery kits Compact embedded system with UPS function AC Power supply 80% efficiency Traditional UPS Power event Traditional UPS 70% Power Efficiency DC Only 56% DC power input AC Plug IEI AUPS Sub-system IEI AUPS Sub-system DC 90~95% DC power input DC in Power event DC IEI on board DC power module

4 3.Easy Management Network Remote Management Anywhere AUPS IP address Network Remote Management Software Battery Capacity Status Power On/OFF Status Report UPS Status Monitoring Remote control DC output ON/OFF via web interface. Intelligent Softwrae Utility The remote management software utility and application program allows users to easily get the status of the AUPS and to control the AUPS power functions from anywhere with an Internet connection. Click ALARM to get each AUPS status via internet STATUS Send Board configuration Network Remote Management Software

5 Battery Monitoring Utility Monitor The Most Critical Battery Functions on the Local Machine The battery monitoring utility allows AUPS status monitoring and provides the ability to change the settings Uninterruptible Power Systems is a significant product that serves as emergency power when you suffer from electric event DC Input Detection Battery Status Detection AUPS STATUS STATUS shows DC / Battery power input detection Battery Type Battery usage remaining time Battery capacity bar Real time information updating BATTERY STATUS BAT.A shows Battery status real time monitoring IEI smart battery software Battery detection Battery capacity status Battery charge DC Input Indicator Battery Indicator Temperature warning Low battery alarm Connection port status DC Input only Normal Icon Charging 50% Capacity 50% Charging 100% Capacity 100% LAN CONFIGURATION LAN shows system IP Address information Auto Shutdown Auto-Scan Connection port System shuts down condition by battery capacity setting SETTING SETTING shows Connection Detection port In addition, the utility software provide the following functions: Current Power source. Battery status. Charging status. Percentage remaining ABOUT shows AUPS Utility information Meanwhile, IEI also provides AUPS API SDK and command list for customer programming under DOS or Linux system AUPS API Content AUPS API SDK Inti() AUPS Close() WriteCommand() ReadCommand() Error Code Definition() AUPS API SDK/Content

6 AUPS Battery Kits Connection board Connection cable Connection board screw Battery screw PN:13ZD RS PN: RS Length 180mm PN: RS M3*6 screw PN: RS M2*10 screw Base board IEI AUPS Battery Kits includes: Battery pack BAT-LI-2S2P3800 for BATKIT-2S2P3800-R10 IEI provides two type AUPS Battery kits for user to choose. Type1: BATKIT-2S2P3800-R10 (7.4V 3800mAH) Base board BAT-LI-4S2P3800 for BATKIT-4S2P3800-R10 Type2: BATKIT-4S2P3800-R10 (14.8V 3800mAH) Base board C2-00-RS for BATKIT-2S2P3800-R C2-00-RS for BATKIT-4S2P3800-R10 Connection board (PN:13ZD RS) PN: C2-00-RS Connection cable (PN: RS) PN: C2-00-RS Battery screw (PN: RS) Base board screw (PN: RS) BAT-LI-2SP3800 BAT-LI-4SP3800 BATKIT-2S2P3800-R10 BATKIT-4S2P3800-R10 Battery Model Name BAT-LI-2S2P3800 BAT-LI-4S2P3800 Battery type Li-Ion 2S2P 7.4V Li-Ion 4S2P 14.8V Battery capacity 7.4V 3800mAH 14.8V, 3800mAH Maximum charge voltage 8.4V 16.8V The end of discharging voltage 5.6V 11.2V Suggestive charging current (Max.) 2A 2A System continuous discharging current(max) 7.6A 7.6A The end of charge condition 250mA/1Minutes 200mA/1Minutes Battery charge time ( Power off ) 2.5hrs 5hrs Battery charge time ( Power on ) 6.5hrs 13hrs Discharge protection Charge protection Under Voltage Protection / Over Current Protection Over Voltage Protection / Over Current Protection Ambient temperature 0 C~40 C 0 C~40 C Storage temperature -20 C~60 C -20 C~60 C Self-discharge rate 340uA~440uA Dimensions 139mm(L) * 47mm(W)*26mm(H) 165mm(L) * 76mm(W)*26mm(H) Weight 236g 450g Cycle life 300 charge/discharge cycles Backup 60W/10Minutes 100W/10Minutes Safety class CE,UL,TUV enova-atom Used on ekino-atom ekino-9102/9152 Note: Suggest to replace Battery Module every 2 years. enova-atom ekino-atom (DC input voltage should be over 18V)

7 UPS Industrial Motherboard ekino-9102/9152 Mini-ITX Motherboard with AUPS sub-system, Intel Pentium M/ Celeron M CPU, Wide range 9-28VDC input DC-In 9~28V CF card IEEE1394a port with bracket to 8pin(1x8) connector LVDS IEEE 1394a Intel 910GMLE DDR2 400 PCIe Mini card Solder Side IEI AUPS sub-system Benefit: RS DIO 2 x USB Intel ICH6M Intel Celeron M 1GHz SATA PCI-E 1x Provides power immediately and maintains power for certain period of time. Continues to provide stable power to equipment and absorbs power surges Smooth out noisy power sources. IEI motherboard with AUPS sub-system kits KB/MS IEEE 1394a 5V power COM 3 Networking UPS Management Port by RJ45 GbE BAT-LI-2S2P3800 2S2P 7.4V 3800mAH BATKIT-2S2P3800-R10 Base board Connection board Connection cable DC-In COM 1/2 VGA 4 x USB2.0 Audio Specifications Form Factor Mini ITX CPU On board Intel Celeron M 1GHz with 512K L2 Cache CPU Socket479 Intel Pentium M/ Celeron M CPU with 400/533MHz FSB System Chipset Intel 910GMLE+ ICH6-M Intel 915GME+ ICH6-M BIOS AMI BIOS Memory One 200-pin DDR2 400MHz SDRAM SO-DIMM supported (ekino-9102 system max. 2GB) One 200-pin DDR2 400/533MHz SDRAM SO-DIMM supported (ekino-9152 system max. 2GB) Ethernet 1 x RTL8111CP PCIe GbE LAN controller Display Output VGA Integrated in Intel 910GMLE/915GME 24-bits dual-channel LVDS by Intel 910GMLE/915GME Graphic Intel Graphics Media Accelerator 900 I/O Interfaces 6 x USB2.0 2 x SATA with 5V DC output 2x RS-232 1x RS-232/422/485 2 x IEEE1394a(1 port by Rear IO, 1 port by CN3) 1 x 6pin box header (2.0mm pitch) for KB/MS Expansion 1x PCI 1x PCIe mini card 1 x PCIe x1 Digital I/O 8-bit digital I/O, 4-bit input/ 4-bit output Super IO ITE IT8718F Audio AC'97 with Realtek ALC655 codec DC connector 2pcs 1x4pin 5V power connector (Major for 2.5" HDD used) SSD CompactFlash Type II WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x external DIN 4pin DC jack 1x internal 2x2pin power connector Power Consumption 2.57A@12V(Intel Celeron M 1GHz with 2GB DDR2) Temperature Operation: 0 C ~ 40 C with AUPS sub-system Operation: 0 C ~ 60 C without AUPS sub-system Humidity Operation: 5% ~95% non-condensing Dimensions 170mm x 170mm Weight GW: 1100 g / NW: 400g Features 1. Equipped AUPS sub-system as a simple UPS system 2. IBX600 Series Embedded System 3. Intel Pentium M and Celeron M FSB400/533 MHz CPU 4. Single voltage wide range 9~28VDC input 5. Support DDR2 400/533MHz SO-DIMM Memory up to 2GB 6. Support PCI Express Mini Card 7. VGA, 24 bits LVDS for Dual Display output 8. CF Socket for SSD Storage Expansion Packing List 1 x ekino-9102/ekino-9152 single board computer 1 x KB/MS Y cable (PN: RS) 1 x I/O shielding (P/N: C0-00-RS ) 1 x Dual USB cable(pn: rs) 2 x SATA 5V power output cable Kits (P/N: RS ) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) Ordering Information Part No. Description Mini-ITX Motherboard with AUPS sub-system, Intel ekino g512-r10 Celeron M 1GHz 512K Cache CPU, 910GMLE, Wide range 9-28VDC input Mini-ITX Motherboard with AUPS sub-system, Intel ekino-9102cf-1g512-r10 Celeron M 1GHz 512K Cache CPU, 910GMLE, Wide range 9-28VDC input, CF Card Mini-ITX Motherboard with AUPS sub-system, Intel ekino-9152-r10 Pentium M/ Celeron M CPU, 915GME, Wide range 9-28VDC input Mini-ITX Motherboard with AUPS sub-system, Intel ekino-9152cf-r10 Pentium M/ Celeron M CPU, 915GME, Wide range 9-28VDC input, CF Card Embedded system with UPS function, Intel Celeron M 1 GHz 512K cache CPU,910GMLE,1GB DDR2,802.11b/g IBX UPS-R10/CM373/1GB wireless, Li-ion Battery(2S2P), 9~28VDC in, 60W adaptor, white, RoHS CF-479B-RS CPU Cooler (50mm x 50mm x 26mm, 50W) WMPCIE-V01-R10 BAT-LI-2S2P3800 BATKIT-2S2P3800-R RS FSP0601AD101C746-RS SAIDE-KIT01-R10 PCIe Mini card wireless LAN Module 2S2P 7.4V 3800mAH SMART BATTERY 2S2P 7.4V 3800mAH AUPS BATTERY KIT Single port IEEE1394a Cable 60W/12V Power Adaptor 90VAC~260VA, DIN 4 PIN SATA to IDE/CF Converter board

8 ekino-atom DIO Intel 945GSE Network AUPS Management Port Mini-ITX SBC with AUPS sub-system, Intel Atom N GHz, Wide range 9-28VDC input, VGA/DVI/TV COM1/2 VGA Dual GbE COM3~4 5V output KB/MS DC-In DVI 4x USB2.0 Audio HDTV PCIe Mini card 2 x USB Intel Atom Processor 2x SATA IDE BAT-LI-2S2P3800 2S2P 7.4V 3800mAH BATKIT-2S2P3800-R10 Base board Connection board Connection cable Specifications LVDS Intel ICH7M Form Factor Mini ITX CPU Intel Atom Processor N GHz with 533MHz FSB 512K L2 Cache System Chipset Intel 945GSE + Intel ICH7M BIOS AMI BIOS Memory One 200-pin 400/533 DDR2 SDRAM SO-DIMM supported (system max. 2GB) Ethernet Dual Realtek PCIe 8111CP GbE Controller I/O Interface 6 x USB2.0 3 x RS x IDE 2 x SATA with 5V DC output 1 x RS-232/422/485 1 x 6pin header for KB/MS Graphic On Intel Graphics Media Accelerator 950 (Intel GMA 950) Display Output VGA integrated in Intel 945GSE Support HDTV resolution up to 1080i by component interface 18-bits dual-channel LVDS by Intel 945GSE DVI-D support by Silicon image Sil1362 Expansion 1x PCI 1x PCIe mini card DC connector 2pcs 1x4pin 5V power connector (Major for 2.5" HDD used) Digital I/O 8-bits digital I/O, 4-bits input/ 4-bits output Infrared Interface 1x 5pin pin header SSD 1 x CF Type II Super IO ITE IT8718F Audio Realtek ALC655 AC'97 Codec WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x external DIN 4pin DC jack 1x internal 2x2pin power connector Power Consumption 1A@12V (Intel Atom N270 with 1GB DDR2) Temperature Operation: 0 C ~ 40 C with AUPS sub-system Operation: 0 C ~ 60 C without AUPS sub-system Humidity Operation: 5% ~95% non-condensing Dimensions 170mm x 170mm Weight GW: 1100g / NW: 400 g 1. Intel Atom N GHz for ultra low voltage fan-less support 2. Wide range 9-28V DC input 3. Equipped with AUPS sub-system acts as a simple UPS system 4. Dual-display supported by VGA + DVI-D, LVDS + VGA, LVDS + DVI-D 5. IBX 600 Embedded System 6. Support 6 x USB2.0, 2 x SATA, 4x COM 1 x ekino-atom single board computer 1 x Dual RS-232 cable (P/N: RS) 2 x SATA 5V power output Cable Kit (P/N: RS) 1 x I/O shielding (P/N: C0-00-RS) 1 x KB/MS Y cable (PN: RS) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) Part No. BAT-LI-4S2P3800 4S2P 14.8V 3800mAH Features Packing List Ordering Information ekino-atom-n270-r10 CB-USB02-RS HDTVCABLESET-01 WMPCIE-V01-R10 BATKIT-2S2P3800-R10 BAT-LI-2S2P3800 BATKIT-4S2P3800-R10 BAT-LI-4S2P FSP0601AD101C746-RS RS BATKIT-4S2P3800-R10 Base board Connection board Connection cable (DC input voltage should be over 18V) Description Mini-ITX SBC with AUPS sub-system, Intel Atom N GHz, Wide range 9-28VDC input, VGA/DVI/TV Dual USB cable HDTV Cable Set with S-Video, Composite and Component Interfaces PCIe Mini card wireless LAN Module 2S2P 7.4V 3800mAH AUPS BATTERY KIT 2S2P 7.4V 3800mAH SMART BATTERY 4S2P 14.8V 3800mAH AUPS BATTERY KIT 4S2P 14.8V 3800mAH SMART BATTERY 60W/12V Power Adaptor 90VAC~260VA, DIN 4 PIN 44pin 2.5" IDE cable

9 enova-atom 5.25" SBC with AUPS sub-system, Intel Atom N GHz, Wide range 9-28VDC input, Dual PCIe Mini card Network UPS Management Port by RJ45 DIO COM1~4 DDR2 533 CF Type II IDE Intel Atom Processor 5V output BATKIT-2S2P3800-R10 Intel 945GSE Dual PCIe Mini card BAT-LI-2S2P3800 2S2P 7.4V 3800mAH Base board Connection board Connection cable LVDS CRT HDTV Specifications Intel ICH7M Audio CPU Intel Atom Processor N GHz with 533MHz FSB 512K L2 Cache System Chipset Intel 945GSE / Intel ICH7M BIOS AMI BIOS Memory One 200-pin 400/533 DDR2 SDRAM SO-DIMM supported (system max. 2GB) Ethernet Dual Realtek PCIe 8111CP GbE Controller Graphic On Intel Graphics Media Accelerator 950 (Intel GMA 950) I/O Interface 3 x RS x RS-232/422/485 6 x USB2.0 1 x LPT 2 x SATA with 5V DC output 1 x IDE 1 x 6pin header for KB/MS Expansion 1 x PC/104+ (ISA+PCI bus) 2 x PCIe mini card DC connector 2pcs 1x2pin 5V power connector (Major for 2.5" HDD used) Digital I/O 8-bit digital I/O (4-bit input, 4-bit output) Infrared Interface 1x 5pin pin header Super IO ITE8718F Display Output Analog CRT Support for CRT Hot plug Support HDTV by component interface 18-bit dual-channel LVDS Support up to UXGA (1600x 1200) Audio AC'97 ALC655 codec SSD CF Type II TPM 1x 20pin pin header WDT Software programmable supports 1~255 sec. system reset Power Supply Maximum input voltage range 9V~28V Recommend operating input voltage range 12V~24V 1x internal 2x2pin power connector Power Consumption 1.19A@12V (Intel Atom N270 with 1GB DDR2) Temperature Operation: 0 C ~ 40 C with AUPS sub-system Operation: 0 C ~ 60 C without AUPS sub-system Humidity Operation: 5% ~ 95%, non-condensing Dimension 203mm x 146mm Weight GW:1000g, NW:400g 6x USB2.0 KB/MS Features 1.Intel Atom N GHz for ultra low voltage fan-less support 2.Equipped with AUPS sub-system acts as a simple UPS system 3.Support Dual PCIe mini Card for expansion 4.Wide range 9-28V DC input 5.Support LVDS, TV-out, VGA display output 6.CF socket for storage expansion 7.TPM support Packing List 1 x enova-atom Single Board Computer 1 x VGA cable (P/N: RS) 1 x KB/MS Y cable (P/N: RS) 1 x Audio cable (P/N: RS) 4 x RS-232 cable (PN: RS) 2 x SATA 5V power output Cable Kit (PN: RS) 1 x USB cable (PN: RS) 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG Part No. Ordering Information enova-atom-n270-r10 HDTVCABLESET RS RS WMPCIE-V01-R10 WMUSB-V01-R10 TPM-WI01-R10 TPM-IN01-R10 BATKIT-2S2P3800-R10 BAT-LI-2S2P3800 BATKIT-4S2P3800-R10 BAT-LI-4S2P3800 BAT-LI-4S2P3800 4S2P 14.8V 3800mAH BATKIT-4S2P3800-R10 Description 5.25" SBC with AUPS sub-system, Intel Atom N GHz, Wide range 9-28VDC input, Dual PCIe Mini HDTV Cable Set with S-Video, Composite and Component Interfaces SATA Power cable LPT cable Base board Connection board (DC input voltage should be over 18V) b+g PCIe mini card wireless LAN module with Atheros b+g USB embedded module with VIA 20-pin WINBOND TPM Module, S/W management Tool 20-pin INFINEON TPM Module, S/W management Tool 2S2P 7.4V 3800mAH AUPS BATTERY KIT 2S2P 7.4V 3800mAH SMART BATTERY 4S2P 16.8V 3800mAH AUPS BATTERY KIT 4S2P 14.8V 3800mAH SMART BATTERY Connection cable

10 UPS Embedded System IBX-600-ATOM Mini ITX Intel Atom Solution with AUPS sub-system Battery Support Features 1. Intel Atom N GHz Mini ITX solution 2. Supports Slim ODD, 2.5 hard drive 3. UPS function by Li-ion battery with easy assembly design 4. Built-in b/g wireless with PIFA antenna VDC ~ 24 VDC wide range input IEI Smart Battery Monitoring Software. Can support remote monitoring from RJ-45. Specifications Model IBX-600-ATOM IBX-600-ATOMUPS SBC Processor Chipset System Memory Ethernet Wireless Display ekino-atom Intel Atom TM N GHz with 533 FSB Intel 945GSE + Intel 82801GBM/ICH7M 200-pin 1GB DDR2 SDRAM SO-DIMM Dual Realtek RTL8111CP GbE controllers built in b/g wireless, PCIe mini card form factor with USB interface VGA interface intergrated in 945GSE DVI -D support by Silicon Image Sil1362 USB 6 x USB 2.0 Serial Port Audio Storage Power Input 2x RS x mic in, 1 x speaker out 1 x slim type ODD, 1 x 2.5 SATA HDD 12 VDC ~ 24 VDC in with 4 pin DC power DIN connector Ship with 60W power adaptor UPS Function N/A 7.4V 2S2P 3800mAH Li-Ion smart battery Chassis Construction Heavy duty metal with plastic front panel Operating Temperature 0 C~45 C 0 C~40 C Operating shock Operating Vibration Half-sine wave shock 3G; 11ms; 3 shocks per axis MIL-STD-810F 514.5C-1 (HDD) MIL-STD-810F 514.5C-2 (CompactFlash) Weight (Net/Gross) 2.1 kg / 3.9 kg 2.8kg / 4.6kg Dimensions (DxWxH) Mounting EMC/Safety 306.8mm x 209.8mm x 65mm Desktop, wall mount CE, FCC class A Packing List Ordering Information 1 x QIG 1 x screw set with mini jumper 1 x wall mount kit 1 x power adaptor 1 x power cord 1 x SATA CD-ROM cable 1 x driver & manual CD 4 x foot pad Part No. IBX-600-/N270/1GB IBX-600-ATOMUPS-R10/N270/1GB Description Embedded system, Intel N GHz CPU, Intel 945GSE, built in 1GB DDR2 memory, built-in b/g wireless, 12~24VDC in, with 60W adaptor, white, RoHS Embedded system with UPS function, Intel N GHz CPU, Intel 945GSE, built in 1GB DDR2 memory, built-in b/g wireless, Li-ion Battery(2S2P); 7.4V;3800mAh, 12~24VDC in, with 60W adaptor, white, RoHS 10

11 IBX Mini ITX Intel Celeron M Solution with AUPS sub-system Support Features 1. Intel Celeron M 1.0GHz Mini ITX solution 2. Supports Slim ODD, 2.5 hard drive and CompactFlash and CompactFlash 3. UPS function by Li-ion battery with easy assembly design 4. Built-in b/g wireless with PIFA antenna VDC ~ 24 VDC wide range input IEI Smart Battery Monitoring Software. Can support remote monitoring from RJ-45. Model IBX IBX UPS SBC Processor Chipset System Memory Ethernet Wireless Display ekino-9102 Intel Celeron M 1GHz 512K cache with 400 MHz FSB Intel 910GMLE + Intel ICH6M 200-pin 1GB DDR2 SDRAM SO-DIMM Realtek RTL8111CP GbE controllers built in b/g wireless, PCIe mini card form factor with USB interface VGA interface intergrated in 910GMLE USB 6 x USB 2.0 Firewire 1 x IEEE 1394 Serial Port Audio Storage Power Input 3x RS x mic in, 1 x speaker out 1 x slim type ODD, 1 x 2.5 SATA HDD, 1 x CompactFlash slot 12 VDC ~ 24 VDC in with 4 pin DC power DIN connector Ship with 60W power adaptor UPS Function N/A 7.4V 2S2P 3800mAH Li-Ion smart battery Chassis Construction Heavy duty metal with plastic front panel Operating Temperature 0 C~45 C 0 C~40 C Operating shock Operating Vibration Half-sine wave shock 3G; 11ms; 3 shocks per axis MIL-STD-810F 514.5C-1 (HDD) MIL-STD-810F 514.5C-2 (CompactFlash) Weight (Net/Gross) 2.1 kg / 3.9 kg 2.8kg / 4.6kg Dimensions (DxWxH) Mounting EMC/Safety Specifications 306.8mm x 209.8mm x 65mm Desktop, wall mount CE, FCC class A Packing List Ordering Information 1 x QIG 1 x screw set with mini jumper 1 x wall mount kit 1 x power adaptor 1 x power cord 1 x SATA CD-ROM cable 1 x driver & manual CD 4 x foot pad Part No. IBX R10/CM373/1GB IBX UPS-R10/CM373/1GB Description Embedded system, Intel Celeron M 1 GHz 512K cache CPU, Intel 910GMLE, built in 1GB DDR2 memory, built-in b/g wireless, 12~24VDC in, with 60W adaptor, white, RoHS Embedded system with UPS function, Intel Celeron M 1 GHz 512K cache CPU, Intel 910GMLE, built in 1GB DDR2 memory, built-in b/g wireless, Li-ion Battery(2S2P); 7.4V;3800mAh, 12~24VDC in, with 60W adaptor, white, RoHS 11

12 Panel PC with Intelligent UPS Module Intelligent UPS Module High Energy Density / Lightweight / Compact DC to DC UPS & Power Module Protect your panel PC from electrical damage and greatly reduce the risk of losing data. The UPS module serves as temporary power during a short break in power and allows a safe system shutdown for longer periods of power loss. D. Networking UPS Management Port by RJ-45 Ethernet 1.DC 9V~36V input by terminal block (Only AUPS-A20 / AUPS-B20) A. Dual Power Input Connector B. Battery Status USB Console Port 2. (1) Only 12V input by DC jack (AUPS-A10 / AUPS-B10) (2) Wide 9V~36V input by DC jack (AUPS-A20 / AUPS-B20) Features 60W 12V) or 100W 12V) output 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements) Rugged metal enclosure for standard VESA 75/100 mounting Web-based, remote network management, no software installation required Local PC-based monitoring software for input detection and battery status monitoring Auto shut down when battery low Remote DC output ON/OFF switch for external switch installation Provides stable power to the PC during line sags and spikes and absorbs power surges and transients, protecting expensive equipment Dimension Battery Capacity Output Power AUPS-A10-R10 AUPS-A20-R10 AUPS-A10-R10 12V AUPS-A20-R10 9~36V 150x95x34mm 28 Wh (Watt/H our) 60W (5A@12V) VESA Support 75x75 mm Model Name Input Power AUPS-B10-R10 AUPS-B20-R10 AUPS-B10-R10 12V AUPS-B20-R10 9~36V 170x150x34mm 56 Wh (Watt/Hour) 100W (8.3A@12V) 75 x 75 mm 100 x 100 mm C.DC Power button DC Remote Power button LED Signal Table Color Function Dark Light Blinking LED 1 Green Power Input DC Power Out DC Power In LED 2 Yellow Charger Status LED 3 Orange Battery Status Discharging Charging Battery Full Battery Low Applications Provide standard VESA mounting to fit in all kind of situations in any application. The fanless embedded system, IBX-530-ATOM which only consumes 15 watts, applied with the AUPS-A20-R10 offers reliable wide range DC input, economical power protection and more than 140 minutes operation time Embedded System IBX-530-ATOM VESA 75/100 Compliance + AUPS-A20-R10 12 UPS batter y solution-v1.0

13 AUPS module Spec Model Name AUPS-A10 AUPS-A20 AUPS-B10 AUPS-B20 VESA Type VESA 75 VESA 75 VESA 75 and 100 VESA 75 and 100 Input voltage Uinated/range DC +12V DC +9V~+36V DC +12V DC +9V~+36V Input current rated 1. Adapter is 12V--6A (Load is 60W) 2. Battery is 6V--12A (Load is 60W) 1. Adapter is 12V--9A (Load is 100W) 2. Battery is 12V--9A (Load is 100W) Input Data Standby power consumption 0.3A (0.2A if Network Management disabled) Operation with charging current 500mA Operation with charging power consumption 6W 10W Charging time with system ON/OFF 8hrs / 2hrs (Battery empty) Output voltage for normal operation DC +12V +/-5% Output voltage for battery operation, approx. 6~8.4V DC6 V (exhaustive discharge protection) 12~16.8V DC12 V (exhaustive discharge protection) Output Data output current 0A~5A 0A~8.3A Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading 89% 93% 95% 94% short-circuit protection Yes 1.Battery low is 10% of Battery capacity Protection Exhaustive discharge protection 2.Shuntdown 5% of Battery capacity (Default) 3.The end of Battery discharge voltage is 6V EMC / Safety certification UL, TUV. CE, FCC Ethernet interface Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable Monitoring PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B" USB interface connector to DC-UPS Physical Dimensions 152mm(L) * 96mm(W)*28mm(H) 174mm(L) * 147mm(W)*35mm(H) Weight 1.2kg 1.8kg Green DC power input LED Indicator Yellow Battery charging Orange Bettery discharging Environment Operating Tem. 0 C~40 C Storage Tem. -20 C~50 C Note1: Suggest to connect DC input constantly. Battery will be drained after 14 hours. Note2: System power consumption + AUPS charging power consumption = Total watts of power source Battery Module spec Model Name AUPS-A10 AUPS-A20 AUPS-B10 AUPS-B20 Battery Model Name BAT-LI-2S2P3800 BAT-LI-4S2P3800 battery type Li-Ion 2S2P 7.4V Li-Ion 4S2P 14.8V Battery capacity 7.4V 3800mAH 14.8V, 3800mAH Maximum charge voltage 8.4V 16.8V The end of discharging voltage 5.6V 11.2V Suggestive charging current (Max.) 2A 2A System continuous discharging current(max) 7.6A 7.6A The end of charge condition 250mA/1Min 200mA/1Min Discharge protection Under Voltage Protection / Over Current Protection Battery Charge protection Over Voltage Protection / Over Current Protection Ambient temp 0 C~40 C 0 C~40 C Storage Tem -20 C~60 C -20 C~60 C Self-discharge rate 340uA~440uA Dimensions 139mm(L) * 47mm(W)*26mm(H) 165mm(L) * 76mm(W)*26mm(H) Weight 236g 450g Cycle life 300 charge/discharge cycles Backup 60W/10Min 100W/10Min Safety class CE,UL,TUV Note: Suggest to replace Battery Module every 2 years. Selection table for UPS modules and mains buffering time AFOLUX PPC AUPS-A10 AUPS-A20 AUPS-B10 AUPS-B20 Under 50W solution AFL-057-LX (15W~20W) 145min 145min 290min 290min AFL-07A-ATOM (20W~25W) 100min 100min 200min 200min AFL-08AH-ATOM (25W~30W) 70min 70min 140min 140min AFL-10A-ATOM (25~30W) 70min 70min 140min 140min AFL-10A-9103 (40W~45W) 50min 50min 100min 100min AFL-10A-LX (25W~30W) 70min 70min 140min 140min AFL-12A-LX (25W~30W) 70min 70min 140min 140min AFL-12B-CX2 (38W~42W) 50min 50min 100min 100min AFL-12A-ATOM (25W~30W) 70min 70min 140min 140min AFL-12B-9103 (45W~48W) 45min 45min 90min 90min 50W ~ 100W solution AFL-15B-915-CM370 (58W~63W) min 35min AFL-15C-9652-T7500 (65W~70W) min 30min AFL-17B-915-CM370 (75W~80W) min 25min AFL-17C-9652-T7500 (85W~90W) min 20min AFL-19B-915-CM370 (75W~80W) min 25min AFL-19C-9652-T7500 (85W~90W) min 20min Note: The backup time could be varied on different models or operating temperature. BAT-LI-2S2P3800 BAT-LI-4S2P

14 Light Industrial IP 64 PPCs AFOLUX All-in-One VESA Mount Panel PC Small Size Fanless small size AFOLUX Panel PC is specially focused on interactive control device. Particularly through x86 PC base architecture provides quick developing application software, time to market, and highly compatible to all kind of OS benefits. User can easily choose. Applications: Door Access Control System Car PC Home Automation Building Control Terminal Medium Size 5.6 ~7 Compact All-in-One Touch Panel PC 5.6 QVGA QVGA Touch Panel PC Fanless Design 5.7 VGA VGA higher resolution offers more detail LED-backlight delivers better image and power efficiency \Fanless Design 7 WVGA 16:10 wide screen for better viewing Middle size AFL Panel PC is specially focused on human and graphic interface control device. From embedded processor to dual core platform, IEI provides various performance level for different applications and solutions. Applications: HMI (Human Machine Interface) MES POS System Shop-flow Factory Automation Parking System ATM Machine Large Size 8.4 ~12.1 Medium All-in-One Touch Panel PC 8.4 SVGA 450 nits high brightness Fanless Design 10.4 SVGA Fanless Design 12.1 XGA XGA (1024 x 768) High Resolution Fanless Design 12.1 Fanless POS System Available Big size AFL Panel PC is specially focused on information display and broadcast devices. With many value added accessories, IEI big size AFL panel PC could be easily applied to dedicated applications such as POS, KIOSK, and digital signage solutions. Applications: Digital Signage Surveillance KIOSK Gaming Vending Machine Control System Bus Stop Information Center AFL-056A AFL-057A AFL-07A AFL-08A 15 ~19 Large Size All-in-One Touch Panel PC 15 XGA AFL-15A Intel, AMD and VIA complete platform support Fanless POS System Available Super expansion capability KIOSK System Available AFL-10A AFL-17A 17 SXGA Super expansion capability KIOSK System Available AFL-12A AFL-19A 19 SXGA 19" large screen for better viewing Widescreen Performance Level Embedded Computing Platform AMD LX800 VIA CX700M Intel 945GSE Small Size Medium Size 5.6" 5.7" W7" 8.4" 10.2" 10.4" 12.1" 15" Industrial Solution AFL- 056A-LX Industrial Solution AFL-057A- LX Industrial Solution Industrial Solution In-wall application RFID solution In-wall application Industrial Solution Industrial Solution AFL-07A-LX AFL-08AH-LX AFL-10A-LX AFL-12A-LX AFL-07A- CX2 AFL-057A- AFL-07A- AFL-08AH- CX2 AFL-08AH- AFL-08B- AFL-408A- AFL-408B- ACT-08A-CX2 AFL-10A-CX2 AFL-12B-CX2 ACT-08A- ACT-08B- AFL-W410A- In-wall application POS application Industrial Solution KIOSK application AFL-12B- LXPOS AFL-10A-CX AFL-12B-CX AFL-15A-CX AFL-10A- AFL-12A- AFL-412A- AFL-15A- Single CoreComputing Dual CoreComputing Intel 915GME / 910GMLE Intel 945G ACT-08A-9103 AFL-10A-9103 AFL-12B-9103 AFL-15A-915-R11 AFL-15B-915-R11 Intel GME965 AFL-15C-9652 Intel GM45 AFL-315A- 945-R11 AMD 690E AFL-15B-AM2 14

15 3-series KIOSK Panel PC AFL-315A Feature: 15 and 17 TFT LCD with resistive touch screen Sophisticated high reflection surface with black or white color Multiple functions and connectors built in the one unit system fits all self service solutions and not only decreases maintenance time but also saves the space considerably Versatile mounting solutions and back IO design allows installed in minutes 4-series In-wall Panel PC Feature: 7 ~15 fanless system with resistive touch screen Changeable face plate sticker available to match diverse decoration styles In-wall mounting allows easy installation in minutes 5-series Fanless Dual Core Panel PC AFL-4xxA Removable Face Plate AFL-517A Feature: 17 TFT LCD with Intel GM45 chipset and 45nm mobile Core 2 Duo processor support High performance fanless with optical drive design Feature: x 768 HD large screen with anti-reflection tempered glass protection WiFi b/g/n connection Built-in Bluetooth technology rids systems of cables and allows wireless connection to peripheral devices RFID Panel PC ACT-08A 6-series Large Screen Panel PC AFL-26A AFL-642A Feature: 8.4 SVGA intelligent access control terminal Integrated RFID reader in front of the panel for MIFARE MHz or EM 125 KHz RFID tag Built-in 300K pixel camera and digital microphone WiFi b/g connection Bluetooth Connectivity Vertical Market PPCs Widescreen Widescreen In-wall application POS application AFL-15A-LXPOS Large Size W15" 17" 19" W19" 26" 42" 65" Industrial Solution Industrial Solution KIOSK application Fanless dual cores TV Size Industrial Solution Fanless dual cores Industrial Solution Industrial Solution Large size solution Large size solution AFL-17A-CX AFL-19A-CX AFL-415A- AFL-415AE- AFL-W15A- AFL-17D- AFL-W19A- AFL-W19B- AFL-17A-915-R11 AAFL-19A-915-R11 AFL-17B-915-R11 AFL-317A- 945-R11 AFL-19B-915-R11 AFL-17C-9652 AFL-19C-9652 AFL-26A-965-R10 AFL-642A-965-R10 AFL-17D-GM45-R10 AFL-517A- GM45-R10 AFL-519A-GM45-R10 AFL-W19A-GM45-R10 AFL-665A-GM45-R10 AFL-W19B-GM45-R10 AFL-17B-AM2 AFL-19B-AM2 AFL-26A-AM2-R10 AFL-642A-AM2-R10 15

16 ekino-9102/9152 ekino-atom enova-atom IBX-600 Series AUPS Series AFOLUX PPC Series Headquarters IEI Technology Corp. No. 29, Jhongsing Rd.,Sijhih City,Taipei County, 221, Taiwan TEL : FAX : sales@ieiworld.com America IEI Technology USA Corp. 168 University Parkway, Pomona, CA TEL : FAX : sales@usa.ieiworld.com China IEI Technology (Shanghai) Co., Ltd F No Yi-Shan Road, Min-Hang, ShangHai, China TEL : FAX : , sales@ieiworld.com.cn