FAX L360 User s Guide

Transcription

1 FAX L360 User s Guide

2 This equipment conforms with the essential requirements of EC Directive 1999/5/EC. We declare that this product conforms with the EMC requirements of EC Directive 1999/5/EC at nominal mains input 230V, 50Hz although the rated input of the product is 200V 240V, 50/60Hz. If you move to another EU country and are experiencing trouble please call the Canon Help Desk. (For Europe Only) Model Name H12249 (FAX-L360) Copyright Copyright 2002 by Canon, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon, Inc. ii Preface

3 Trademarks Canon- is a registered trademark, and UHQ is a trademark of Canon Inc. IBM0 is a registered trademark. Microsoft0 and Windows0 are registered trademarks of Microsoft Corporation. Other brand and product names may be trademarks or registered trademarks of their respective companies. As an ENERGY STAR0 Partner, Canon has determined that the FAX-L360 meets the Energy Star guidelines for energy efficiency. Super G3 is a phrase used to describe the new generation of fax machines that use ITU-T V.34 standard 33.6Kbps* modems. Super G3 High Speed Fax machines allow transmission time of approximately 3 seconds* per page which results in reduced telephone line charges. * Approximately 3 seconds per page fax data transmission time based on Canon FAX Standard Chart No.1, (Standard Mode) at 33.6Kbps modem speed. The Public Switched Telephone Network (PSTN) currently supports 28.8Kbps modem speeds or lower, depending on telephone line conditions. Preface iii

4 Safety Information Laser Safety Information Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this unit is hermetically sealed within the protective housing and external cover. No radiation can leak from the machine in the normal operation of the product by the user. This fax is classified as a Class 1 Laser Product under EN : V-240V model The label shown below is attached to the laser scan unit on the fax. This fax has been classified under EN : 1994 and conforms to the following classes: CLASS 1 LASER PRODUCT LASER KLASSE 1 APPAREIL A RAYONNEMENT LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LASER DE CLASE 1 APARELHO A LASER DE CLASSE 1 Caution PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THIS GUIDE MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. iv Preface

5 Contents Chapter 1 Introducing the FAX-L Welcome The Main Features of the FAX-L Plain Paper Fax Features Printer Features Copier Features Telephone Features Using the FAX-L360 With the Printer Driver System Requirements Using Your Documentation How to Use This User s Guide Type Conventions Used in This User s Guide Customer Support Safety Instructions Chapter 2 Setting Up Your FAX-L Choosing a Location for Your FAX-L Dimensions Unpacking Your FAX-L Do You Have Everything? Lifting the FAX-L Removing Shipping Materials Replaceable Parts Assembling the FAX-L Attaching Components Attaching the Paper Loading Warning Label Attaching the Extension Tray Straightening the Multi-Purpose Tray Attaching the Support Trays Making Connections Connecting the FAX-L360 to Your PC Connecting the Telephone Line Connecting the Optional Handset Connecting an Extension Phone or Answering Machine Connecting the Power Cord Setting the Display Language and Country Getting Acquainted With Your FAX-L Front View Contents v

6 Inside View Rear View The Operation Panel Special Function Buttons (One-Touch Speed Dial panel open) The Toner Cartridge Handling and Storing Cartridges Installing/Replacing the Toner Cartridge Loading Recording Paper Loading Paper in the Cassette Loading Paper in the Multi-Purpose Tray Testing the FAX-L Chapter 3 Registering Information in the FAX-L Guidelines for Entering Information Entering Numbers, Letters, and Symbols Editing Information Using the One-Touch Speed Dial button/one-touch Speed Dial Panel. 3-5 Using the Special Function Buttons Using the Menu System Personalising Your FAX-L Identifying Your Documents Entering the Date and Time Registering Your Fax Number and Name Setting the Telephone Line Type Setting the Summer Time Chapter 4 Paper Handling Guidelines for Selecting Print Media Plain Paper Envelopes Labels Transparencies The Paper Path Selecting Paper Delivery Face-Down Delivery Face-Up Delivery Loading Paper The Paper Cassette The Multi-Purpose Tray Loading Envelopes in the Multi-Purpose Tray Changing the Paper Size Setting vi Contents

7 The Multi-Purpose Tray Chapter 5 Speed Dialling Speed Dialling Methods One-Touch Speed Dialling Storing Numbers for One-Touch Speed Dialling Changing a Number/Name Stored Under a One-Touch Speed Dialling Button Using One-Touch Speed Dialling Coded Speed Dialling Storing Numbers for Coded Speed Dialling Changing a Number/Name Stored under a Coded Speed Dialling Code Using Coded Speed Dialling Group Dialling Creating Groups for Group Dialling Using Group Dialling Chapter 6 Sending Faxes Preparing to Send a Fax Document Requirements Scanning Area Selecting Automatic/Manual Document Feed Loading Documents for Automatic Feed Loading Documents for Manual Feed Setting the Resolution and Contrast Setting the Scanning Resolution Setting the Scan Contrast Sending Methods Manual Sending Via the Handset Memory Sending Dialling Methods Sending Documents Manual Sending Via the Handset Memory Sending Adding Pages to the Document in the Automatic Document Feeder (ADF) 6-22 Cancelling Sending Removing the Document From the Automatic Document Feeder (ADF) 6-24 Redialling Manual Redialling Contents vii

8 Automatic Redialling With Memory Sending Cancelling Automatic Redialling Setting Up Automatic Redialling Sequential Broadcasting Sending a Document to More Than One Destination Sending a Document Using Group Dialling Delayed Sending Sending Other Documents While the FAX-L360 is Set for Delayed Sending Chapter 7 Receiving Faxes Different Ways to Receive a Fax FAX/TEL AUTO SW FAX ONLY MODE Setting the RX MODE Setting the Receive Mode Receiving Faxes and Phone Calls Automatically: Fax/Tel Mode Setting Up Fax/Tel Mode What Happens When Fax/Tel Mode is Selected Receiving Faxes Manually: MANUAL MODE Receiving Faxes Automatically: FAX ONLY MODE Using an Answering Machine: ANS.MACHINE MODE Using the FAX-L360 With an Answering Machine Documents Received in Memory Messages Displayed When Documents are Received in Memory Receiving While Registering, Copying, or Printing Cancelling an Incoming Fax Chapter 8 Using the Memory Features Documents Stored in Memory Printing a List of Documents Stored in Memory Printing Documents Stored in Memory Method Method Sending Documents Stored in Memory Deleting a Document Stored in Memory Method Method Chapter 9 Setting Up and Using Polling What s Polling? viii Contents

9 Before You Use Polling Receiving Polling to Receive Faxes Requesting Another Fax to Send a Document Cancelling a Polling Setting Up Polling Sending Before You Can Be Polled to Send Setting Up a Polling Box Scanning a Document into the Memory for Polling Sending Changing the Polling Box Setup Cancelling a Polling Box Chapter 10 Special Features Special Dialling Dialling Through a Switchboard Registering the Access Type and Outside Line Access Number Under the R button Long Distance Dialling How to Enter Pauses Confirming a Dial Tone Using Tone Dialling On a Pulse Line Restricting Use of the FAX-L Restricting Reception Chapter 11 Making Copies Making Copies Chapter 12 Reports and Lists Activity Report Transmission (TX) Reports Error TX Report TX Report Multi TX/RX Report Reception (RX) Report Memory Clear Report Speed Dialling Lists One-Touch Speed Dial List Coded Speed Dial List Group Dial List User s Data List Doc Memory List Contents ix

10 Chapter 13 Frequently Asked Questions If You Cannot Solve the Problem Problems Index Paper Jams Jams in the Automatic Document Feeder (ADF)? Jams in the Output Slots? Jams in the Paper Cassette? Jams Inside the Unit? Jams in the Front Area of the Unit? Jams in the Rear Cover of the Unit? After Clearing a Paper Jam Problems Feeding Paper into the FAX-L Faxing Problems Sending Faxes Receiving Faxes Telephone Problems Copying Problems Printing Problems Print Quality Problems General Problems If the Power Goes Out Error Codes, Messages, and Solutions Chapter 14 Maintaining Your FAX-L Cleaning the FAX-L Cleaning the FAX-L360 Exterior Cleaning the Inside of the FAX-L Cleaning the Scanner Components Transporting the FAX-L Chapter 15 The Menu System Understanding the Menu System Accessing the USER SETTINGS Menu Accessing the REPORT SETTINGS Menu Accessing the TX SETTINGS Menu Accessing the RX SETTINGS Menu Accessing the PRINTER SETTINGS Menu Accessing the POLLING BOX Menu Accessing the SYSTEM SETTINGS Menu Appendix A Specifications... A-1 General... A-2 x Contents

11 Plain Paper Fax... A-4 Copier... A-6 Telephone... A-7 Printer... A-8 Printable Area: Papers... A-9 Printable Area: Envelopes... A-10 Document Sizes... A-11 PC Interface... A-13 Printer Driver... A-13 Appendix B Attaching the Optional Handset to the FAX-L B-1 Handset... B-2 Attaching the Handset to Your Unit... B-3 Adjusting the Ringer Volume Switch... B-6 Maintaining Your Handset... B-6 Contents xi

12 Glossary... G-1 Index... I-1 xii Contents

13 Chapter 1 Introducing the FAX-L360 This chapter introduces you to the main features of the FAX-L360. It also explains how to get the most out of the documentation that comes with the unit, and gives important safety instructions. Welcome The Main Features of the FAX-L Plain Paper Fax Features Printer Features Copier Features Telephone Features Using the FAX-L360 With the Printer Driver System Requirements Using Your Documentation How to Use This User s Guide Type Conventions Used in This User s Guide Customer Support Safety Instructions Introducing the FAX-L360 Chapter 1 Introducing the FAX-L

14 . Welcome Thank you for purchasing the new Canon FAX-L360. We are sure that your FAX-L360 will meet your printing and copying needs easily and conveniently, as well as your fax and phone requirements FAX-L Introducing the FAX-L360 Chapter 1

15 The Main Features of the FAX-L360 The FAX-L360 is a multifunction system for your home or small office. The FAX-L360 combines a plain paper fax machine, a copier, and a telephone* into a single, convenient desktop unit. Plain Paper Fax Machine Printer Introducing the FAX-L360 Copier Telephone* The FAX-L360 s multitasking ability enables you to perform a number of operations simultaneously. For example, you can print a document or make copies at the same time you are sending a fax or receiving a fax into memory. The compact size of the FAX-L360 makes it ideal for desktop use, and allows you to use it in places where other machines may not fit. Plain Paper Fax Features UHQ Image Processing System The FAX-L360 uses Canon s Ultra High Quality Image Processing System to provide enhanced definition in faxed photos. Error Correction Mode (ECM) Using the FAX-L360 s Error Correction Mode (ECM) reduces transmission errors when sending faxes to or receiving faxes from other fax machines that also have ECM capability. Automatic switching between fax and voice calls The FAX-L360 can automatically distinguish between fax calls and normal telephone calls, so that you can receive both through a single phone line. Answering machine connection You can connect an answering machine to the FAX-L360 to let it receive telephone messages and faxes while you are away from your desk. * With optional handset or other telephone connected. This feature is available for certain countries only. Chapter 1 Introducing the FAX-L

16 Transmission speed The FAX-L360 uses G3 data encoding methods that increase transmission speed to approximately 3 seconds* per page. Memory sending/receiving The FAX-L360 can store up to 400* fax pages (either received or to be sent) in its built-in memory, and can receive faxes while printing. Reduced-size printing The FAX-L360 automatically scales received faxes to fit the size of the paper loaded in the paper cassette or the multi-purpose tray. So if your client is sending you a fax on A4-size paper and you have letter-size paper in the multi-purpose tray, the fax will be scaled down and printed on letter-size paper. Automatic dialling and broadcasting To make faxing even easier, the FAX-L360 provides several automatic dialling methods: One-Touch Speed Dialling, Coded Speed Dialling, and Group Dialling. The FAX-L360 also enables you to broadcast faxes or send faxes at a preset time to as many as 133 locations at once. Flexible document feeding The FAX-L360 includes an Automatic Document Feeder (ADF) that can be set for automatic document feed or manual document feed, according to your needs. This allows you to fax a variety of documents, from multipage documents, to a single photo or business card. Printer Features Excellent print quality The FAX-L360 offers dpi laser beam printing, providing you with high resolution text and graphics. Simple maintenance The FX-3 toner cartridge for the FAX-L360 contains both the toner and drum, making installation and replacement simple. Economy toner-saving printing The FAX-L360 includes an economy printing mode which allows you to reduce toner consumption by 30% to 40% approximately. * Based on Canon FAX Standard Chart No.1, standard mode 1-4 Introducing the FAX-L360 Chapter 1

17 Copier Features Up to 99 copies The FAX-L360 can make up to 99 copies of a document at a time, at a rate of up to 6 copies per minute. Resolution The FAX-L360 scans documents at dpi when using direct copying and dpi when using memory copying. Printing resolution is dpi. Introducing the FAX-L360 Copy reduction The FAX-L360 can reduce copies to 90%, 80% or 70% of their original size. This allows you to copy legal-size documents onto A4-size paper, for example. Telephone Features* Automatic dialling The FAX-L360 s three automatic dialling methods (One-Touch Speed Dialling, Coded Speed Dialling, and Group Dialling) can be used to store phone numbers and fax numbers for easy and efficient calling. Connection for the optional handset, an answering machine, or a telephone Connecting the optional handset or a telephone to the FAX-L360 allows you to use it to make and receive normal telephone calls. In addition, connecting an answering machine allows you to receive faxes and phone messages while you are away from your desk. * This feature is available for certain countries only. Chapter 1 Introducing the FAX-L

18 Using the FAX-L360 With the Printer Driver The printer driver that is included with your FAX-L360 unit allows you to use the FAX-L360 s printing function directly from your PC. Use the FAX-L360 as the default printer for Windows applications For more information on using the printer driver with your FAX-L360, refer to the Printer Driver Guide also stored on this CD-ROM. Note The supplied printer driver is designed to operate with Windows 98, Windows Me, Windows 2000, or Windows XP. System Requirements The following hardware and software are necessary to operate the printer driver with the FAX-L360. These are the minimum requirements. Windows Operating System Microsoft Windows 98, Windows Me, Windows 2000, or Windows XP. USB port Computer Processor Windows 98: A 90-megahertz (MHz) Pentium processor or higher Windows Me: A 150-MHz Pentium processor or higher Windows 2000: A 133-MHz Pentium processor or higher Windows XP: A 233-MHz Pentium processor or higher Memory Windows 98/Me: 32 megabytes (MB) of RAM, 64 MB of RAM or more is recommended. Windows 2000/XP: 64 MB of RAM, 128 MB of RAM or more is recommended. 1-6 Introducing the FAX-L360 Chapter 1

19 Hard Disk Space 15 MB of available hard disk space Disk Drive CD-ROM drive, or access to one over a network connection Monitor 256-colour SVGA monitor or greater Introducing the FAX-L360 Printer Cable A USB cable 5 meters (16.4 feet) in length or shorter. For help in purchasing the correct cable, consult your dealer or retailer. Chapter 1 Introducing the FAX-L

20 Using Your Documentation Your FAX-L360 includes the following documentation to help you learn how to use your unit quickly and easily: Quick Start Guide This guide provides basic information on how to set up and operate the FAX-L360. FAX-L360 User s Guide (this guide) This guide provides detailed information on how to set up, operate, maintain, and troubleshoot your FAX-L360. Printer Driver Guide This Guide is also stored on this CD-ROM, and describes how to use your FAX-L360 to print from within your PC s Windows environment. Refer to this Guide whenever you need information about printing from your PC. How to Use This User s Guide To make the best use of this user s guide in learning how to set up and operate your FAX-L360, be sure to do the following: Read this chapter to learn about the FAX-L360 s main features and for guidelines on using the unit safely. Carefully follow the instructions in Chapter 2 to get your unit unpacked and assembled properly. Read Chapter 3 to learn how to enter information in the FAX-L360 and to register your user information. Read Chapte 4 to learn about the types of print media you can use with your FAX-L360, and for instructions on selecting paper delivery and loading paper. Read Chapter 5 to learn how to register numbers for speed dialling, how to change them, and how to use speed dialling to send faxes. Read Chapter 6 through 11 to master the FAX-L360 operating procedures (such as sending faxes, receiving faxes, and making copies) and to learn more about its special features (such as restricting use of the unit and special dialling features). Refer to Chapter 12 to learn about the reports and lists that can be automatically or manually printed from your FAX-L360. If your FAX-L360 begins operating improperly, use Chapter 13 to try to solve the problem. 1-8 Introducing the FAX-L360 Chapter 1

21 Look over Chapter 14 to become familiar with procedures for cleaning your FAX-L360 and replacing the toner cartridge. Refer to Chapter 15 to learn how to change the settings of the FAX-L360. Refer to Appendix A for the FAX-L360 technical specifications. If you still have questions about how to use your FAX-L360, contact your local authorised Canon dealer or the Canon help line. They will be happy to answer your questions. Introducing the FAX-L360 Type Conventions Used in This User s Guide This user s guide follows the conventions below to emphasize certain information that will help you use your FAX-L360 correctly and safely: Caution Cautions tell you how to avoid actions that could injure you or damage your FAX-L360. Note Notes provide advice for using your FAX-L360 more effectively, describe operating restrictions, and tell how to avoid minor operating difficulties. In addition, this user s guide uses bold letters to show the names of buttons and switches on the FAX-L360, such as Stop, Set, and Start/Copy. Text that appears in the unit s display is shown in plain capital letters, such as: RECEPTION OK. Chapter 1 Introducing the FAX-L

22 Customer Support Your FAX-L360 is designed with the latest technology to provide trouble-free operation. If you encounter a problem with the unit s operation, try to solve it by using the information in Chapter 13. If you cannot solve the problem or if you think your FAX-L360 needs servicing, contact your local authorised Canon dealer or the Canon help line Introducing the FAX-L360 Chapter 1

23 Safety Instructions Caution Read these safety instructions thoroughly before using your FAX-L360, and keep them handy in case you need to refer to them later. Except as specifically described in this user s guide, do not attempt to service the FAX-L360 yourself. Never attempt to disassemble the unit: opening and removing its interior covers will expose you to dangerous voltages and other risks. For all service, contact your local authorised Canon dealer or the Canon help line. Introducing the FAX-L360 Always follow all warnings and instructions marked on the FAX-L360. Use the FAX-L360 only on a sturdy, stable, level surface. If the unit falls, it could be seriously damaged. Do not use the FAX-L360 near water. If you spill liquid on or into the unit, unplug it immediately and call your local authorised Canon dealer or the Canon help line. The back of the FAX-L360 includes slots and openings for ventilation. To keep the FAX-L360 from overheating (which can cause it to operate abnormally and create a fire risk), take care not to block or cover these openings. Do not operate the unit on a bed, sofa, rug, or other similar soft surface, or near a radiator or other heat source. Do not place the FAX-L360 in a closet or cabinet or on shelves unless adequate ventilation is available. See Choosing a Location for Your FAX-L360 on page 2-3 for guidelines on how much space the unit needs for ventilation. Operate the FAX-L360 only from the type of power source indicated on the unit s label. If you are unsure of the type of power available from your wall outlets, contact your local power company. Make sure the total amperage used by all devices plugged into the wall outlet does not exceed the ampere rating of the outlet's circuit breaker. Do not allow anything to rest on the power cord and do not place the FAX-L360 where the cord will be walked on. Make sure the cord is not knotted or kinked. Do not insert object of any kind into the slots or openings on the FAX-L360 s cabinet, as they could touch dangerous voltage points or short out parts, and result in fire or electric shock. Chapter 1 Introducing the FAX-L

24 Do not allow small objects (such as pins, paper clips, or staples) to fall into the FAX-L360. If something does fall into it, unplug the unit immediately and call your local authorised Canon dealer or the Canon help line. Do not plug the power cord into an uninterruptible power supply (UPS). Always unplug the FAX-L360 before moving or cleaning it. Whenever you unplug the FAX-L360, wait at least five seconds before you plug it back in. Keep the FAX-L360 away from direct sunlight, as this can damage it. If you have to place it near a window, install heavy curtains or blinds. Do not expose the FAX-L360 to extreme temperature fluctuations. Install the unit in a place with temperatures between 10 and 32.5 C. Always unplug the FAX-L360 during thunderstorms. Before you transport the FAX-L360, remove the toner cartridge. Always lift the FAX-L360 as shown below. Never lift it by its multi-purpose tray or other supports Introducing the FAX-L360 Chapter 1

25 Caution Unplug the FAX-L360 and contact your local authorised Canon dealer or the Canon help line in any of these situations: If the power cord or plug is damaged or frayed. If liquid spills into the unit, or if it is otherwise exposed to rain or liquids. If you notice smoke, unusual noises or odor coming from it. If the FAX-L360 does not operate normally when you follow the operating instructions. Adjust only those controls that are covered by the operating instructions in this user s guide, or you can damage the unit and require extensive repair work. If the FAX-L360 is dropped or its cabinet damaged. If the FAX-L360 begins performing poorly, and you cannot correct the problem by following the procedures in Chapter 13, Frequently Asked Questions. This product emits low level electromagnetic waves. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor. Introducing the FAX-L360 Chapter 1 Introducing the FAX-L

26 1-14 Introducing the FAX-L360 Chapter 1

27 Chapter 2 Setting Up Your FAX-L360 This chapter tells you how to unpack, assemble, and connect your FAX-L360, install the FX-3 toner cartridge, and load paper everything you need to know to get your FAX-L360 ready to use. Choosing a Location for Your FAX-L Dimensions Unpacking Your FAX-L Do You Have Everything? Lifting the FAX-L Removing Shipping Materials Replaceable Parts Assembling the FAX-L Attaching Components Attaching the Paper Loading Warning Label Attaching the Extension Tray Straightening the Multi-Purpose Tray Attaching the Support Trays Making Connections Connecting the FAX-L360 to Your PC Connecting the Telephone Line Connecting the Optional Handset Connecting an Extension Phone or Answering Machine Connecting the Power Cord Setting the Display Language and Country Getting Acquainted With Your FAX-L Front View Inside View Rear View The Operation Panel Setting Up Your FAX-L360 Chapter 2 Setting Up Your FAX-L

28 Special Function Buttons (One-Touch Speed Dial panel open) The Toner Cartridge Handling and Storing Cartridges Installing/Replacing the Toner Cartridge Loading Recording Paper Loading Paper in the Cassette Loading Paper in the Multi-Purpose Tray Testing the FAX-L Setting Up Your FAX-L360 Chapter 2

29 Choosing a Location for Your FAX-L360 Before unpacking your FAX-L360, follow these guidelines to choose an appropriate location for the unit. Caution Please review the information provided in Safety Instructions on pages 1-11 to 1-13, to make sure you are installing your FAX-L360 for safe use. Put the FAX-L360 in a cool, dry, clean, well ventilated place: Make sure the area is free from dust. Make sure the location is not affected by extreme temperature fluctuations, and remains between 10 and 32.5C. Make sure the area s relative humidity is always between 20% and 80%. Keep the FAX-L360 away from direct sunlight. If possible, place the FAX-L360 near an existing telephone outlet, to allow for an easy connection of the telephone line to the unit. Place the FAX-L360 near an electrical wall outlet that provides 200 to 240-volt AC (50 to 60 Hz) power. Place the FAX-L360 near the PC you will be connecting it to. Make sure you can reach it easily, as you will be using the FAX-L360 as a printer, fax machine, copier, and telephone. Do not plug the FAX-L360 into the same circuit as an appliance such as an air conditioner, electric typewriter, television, or copier. Such devices generate electrical noise that can interfere with your unit s ability to send or receive faxes. Set the FAX-L360 on a flat, stable, vibration-free surface that is strong enough to support its weight (about 13 kg). Setting Up Your FAX-L360 Chapter 2 Setting Up Your FAX-L

30 Dimensions Make sure the location you choose provides enough space around the FAX-L360 for adequate ventilation, and to allow paper to flow freely into and out of the unit. The figure below shows the minimum space required for the unit. 773 mm TOP VIEW 483 mm SIDE VIEW 448 mm mm 380 mm BOTTOM VIEW 361 mm 773 mm 483 mm 380 mm Note If you need help installing your FAX-L360 or have any questions about it, contact your local authorised Canon dealer or the Canon help line. 2-4 Setting Up Your FAX-L360 Chapter 2

31 Unpacking Your FAX-L360 Follow the directions below to unpack your FAX-L360 properly, and to make sure you have all of its components and documentation. Do You Have Everything? As you unpack the FAX-L360, save the carton and packing material in case you want to move or ship the unit in the future. Carefully remove all items from the box. You should have someone help by holding the box while you lift the FAX-L360 and its protective packaging out of the carton. Make sure you have the following items: Setting Up Your FAX-L360 MAIN UNIT EXTENSION TRAY SUPPORT TRAYS FX-3 TONER CARTRIDGE POWER CORD TELEPHONE LINE CORD DOCUMENTATION PAPER LOADING WARNING LABEL DESTINATION LABELS If any of the above items are damaged or missing, notify your local authorised Canon dealer immediately. Chapter 2 Setting Up Your FAX-L

32 Note The actual items may differ in shape and quantity from the one shown on page 2-5. Note that the items included with your FAX-360 may vary depending on the country of purchase. Important! Save your sales receipt for proof of purchase in case your FAX-L360 requires warranty service. If you have purchased the optional handset, see Appendix B for the items included. In addition to the items shipped with your FAX-L360, if you wish to use the FAX-L360 as a printer, you will need a USB cable, which you can purchase from your Canon dealer. For best results, use a cable that is no more than 5 metres long. Lifting the FAX-L360 Whenever you plan to move the FAX-L360, be sure to: Hold the unit firmly and keep it level. Always grip the sides of the unit. The recessed areas on each side of the unit serve as handles. 2-6 Setting Up Your FAX-L360 Chapter 2

33 Removing Shipping Materials In order to protect your FAX-L360 during shipping, the unit has been packed with protective material that you must remove before using. Follow these steps: 1. Remove all pieces of shipping tape from the outside of the FAX-L360. Setting Up Your FAX-L Open the operation panel by grasping it with both hands and gently pulling it toward you. Remove protective sheet from the Automatic Document Feeder (ADF), then gently close the operation panel by pressing it down from the centre until it clicks. Note The actual shipping materials may differ in shape, quantity, and position from the ones shown above. Chapter 2 Setting Up Your FAX-L

34 3. Open the front cover by lifting the right side release latch of the unit. Lift the cover forward to its open position. 4. Remove all pieces of shipping tape from the inside of the FAX-L Setting Up Your FAX-L360 Chapter 2

35 5. Lift the paper cassette slightly and pull it out. 6. Remove the shipping tapes and cardboard protector from inside the paper cassette. Setting Up Your FAX-L360 Replaceable Parts The only component of the FAX-L360 that needs regular service or replacement is the FX-3 toner cartridge. Although Canon manufactures many types of toner cartridges, the FX-3 toner cartridge is the only one designed to be used with your FAX-L360. The FX-3 toner cartridge can be purchased at any Canon authorised dealer. Chapter 2 Setting Up Your FAX-L

36 Assembling the FAX-L360 Use the following instructions to assemble your FAX-L360 main unit and components. To see how the FAX-L360 will look fully assembled, see Getting Acquainted With Your FAX-L360 on page Attaching Components Attaching the Paper Loading Warning Label The paper loading warning label is included with your FAX-L360 unit. Attach the label to the left of the multi-purpose tray as shown below Setting Up Your FAX-L360 Chapter 2

37 Attaching the Extension Tray To attach the extension tray, insert the tab into the corresponding slot as shown in the illustration below. Pull the inside extension tray towards you. Make sure the tab is inserted into the slot finally not to come off. Note Setting Up Your FAX-L360 Straightening the Multi-Purpose Tray To straighten the paper rest, hold its centre tab and pull it up until it stops. Then, unfold the attached flap. Chapter 2 Setting Up Your FAX-L

38 Attaching the Support Trays There are two identical support trays. One of the support trays holds paper as it comes out of the face-down delivery slot. To install this support, insert the tabs into the corresponding slots above the face-down delivery slot, making sure that the smaller tab is on the left. The other support tray holds documents as they are fed into the Automatic Document Feeder (ADF). To install this support, insert the tabs into the corresponding slots above the Automatic Document Feeder (ADF), making sure that the smaller tab is on the left Setting Up Your FAX-L360 Chapter 2

39 Making Connections Note Be sure to connect any external device before using your FAX-L360. Canon cannot guarantee that all answering machines will be compatible with your FAX-L360, due to varying specifications. If you have connected an external device to your FAX-L360, be sure to set the correct receive mode. (See Chapter 7) To connect an extension phone as well as an answering machine, connect the extension phone to the answering machine, and then the answering machine to your FAX-L360. If you connect a data modem to your FAX-L360 and you use it extensively, or others access your PC frequently through the data modem, you may want a dedicated telephone line for your data modem. Setting Up Your FAX-L360 Connecting the FAX-L360 to Your PC Your FAX-L360 has a USB port that allows you to connect it to a PC. To do this, you need to purchase a USB cable from your dealer. For best results, use a cable that is 5 metres in length or shorter. Note Connect the FAX-L360 to your computer as follows: 1. Make sure the computer is turned off and the FAX-L360 is unplugged. 2. Connect the USB cable to your FAX-L360 and PC during software installation to ensure the proper operation of the printer driver. (See the Printer Driver Guide.) Chapter 2 Setting Up Your FAX-L

40 Connecting the Telephone Line Connect the FAX-L360 to a telephone line as follows: 1. Connect one end of the supplied telephone line to the jack marked on the left side of the FAX-L Connect the other end of the line to your wall telephone jack. Connecting the Optional Handset Connect the end of the optional handset cord to the jack marked D Setting Up Your FAX-L360 Chapter 2

41 Connecting an Extension Phone or Answering Machine Connect the end of the extension phone or answering machine cord to the jack marked J. Setting Up Your FAX-L360 If you connect an answering machine to the FAX-L360, be sure to read your answering machine s manual. Note You can also connect the extension phone to the jack marked D if you have not connected the optional handset. Chapter 2 Setting Up Your FAX-L

42 Connecting the Power Cord Caution Follow these guidelines when connecting your FAX-L360 to a power source: The FAX-L360 is intended for domestic use only and requires V AC. Do not use it outside the country where it was purchased. Use only the power cord that came with the unit. Using a longer cord or extension cord can cause the FAX-L360 to malfunction. Unplug the unit only by pulling on the plug itself. Never pull on the cord. Do not plug the FAX-L360 into an outlet shared with an appliance such as an air conditioner, computer, electric typewriter, or copier. These devices generate electrical noise, which can interfere with the operation of the FAX-L360. Make sure nothing is laying on the power cord, and that the cord cannot be walked on or tripped over. Do not overload the electrical outlet. Make sure the total amperage used by all the machines plugged into the outlet does not exceed the ampere rating of the outlet s circuit breaker. Do not plug the unit into an uninterruptible power supply (UPS) Setting Up Your FAX-L360 Chapter 2

43 Connect the power cord as follows: 1. Plug the supplied power cord into the power connector on the back of the FAX-L360. Setting Up Your FAX-L Plug the other end of the power cord into the outlet. Note The FAX-L360 has no power switch, so its power is on as long as it is plugged in. Once connected, though, the unit still needs to warm up before you can use it. While the FAX-L360 is warming up, the message PLEASE WAIT appears in the LCD display: PLEASE WAIT When you connect the power cord to an AC outlet for the first time after purchase, DISPLAY LANGUAGE will appear in the LCD display after PLEASE WAIT. In this case, set the language for the LCD display, and the country*. (See Setting the Display Language and Country* on page 2-19.) When the date, the time, the receive mode, and the resolution mode appear, the FAX-L360 is in standby mode and ready for use: 31/ TUE 10:00 FaxOnly STANDARD * The country selection feature is available for certain countries only. Chapter 2 Setting Up Your FAX-L

44 Note If the toner cartridge has not been installed yet, the message CHECK COVER/ CART alternates with the standby mode display. In this case, install the toner cartridge. (See Installing/Replacing the Toner Cartridge on page 2-31.) CHECK COVER/CART 31/ TUE 10:00 FaxOnly STANDARD 2-18 Setting Up Your FAX-L360 Chapter 2

45 Setting the Display Language and Country* When you connect the power cord to an AC outlet for the first time, you need to select the language for the LCD display. For some countries, you also need to select the country where you are using the FAX-L360. The FAX-L360 automatically switches the selectable settings and the default settings in the menus to suit the selected country. Follow these steps to set the display language and country. After connecting the power cord, the display changes from PLEASE WAIT to the DISPLAY LANGUAGE menu. 1. Open One-Touch Speed Dial panel Setting Up Your FAX-L or K to select the preferred language for the LCD display. 3. Press Set. Set DISPLAY LANGUAGE ENGLISH If COUNTRY SELECT does not appear after DATA ENTRY OK is displayed: Setting is completed and the FAX-L360 enters the standby mode. If COUNTRY SELECT appears after DATA ENTRY OK is displayed: Go to step or K to select the country where you are using the FAX-L360. COUNTRY SELECT FRANCE If your country name does not appear, select OTHERS. * The country selection feature is available for certain countries only. Chapter 2 Setting Up Your FAX-L

46 5. Press Set. Set 31/ TUE 10:00 FaxOnly STANDARD Once you have selected the language and country, these setting menus will not appear next time you connect the power cord. To check the settings made by the country selection, you can print the USER S DATA LIST. (See User s Data List on page ) You can change the display language or country setting using the SYSTEM SETTINGS menu. (See Accessing the SYSTEM SETTINGS Menu on page ) 2-20 Setting Up Your FAX-L360 Chapter 2

47 Getting Acquainted With Your FAX-L360 Front View Before using your FAX-L360, look over the diagrams on these pages to become familiar with the unit s components. PAPER REST SUPPORT TRAYS AUTOMATIC DOCUMENT FEEDER (ADF) MULTI-PURPOSE TRAY PAPER GUIDE RELEASE LATCH Setting Up Your FAX-L360 DOCUMENT GUIDES OPERATION PANEL FACE-DOWN DELIVERY SLOT FRONT COVER PAPER DELIVERY SELECTOR FACE-UP DELIVERY SLOT PAPER CASSETTE EXTENSION TRAY Chapter 2 Setting Up Your FAX-L

48 Inside View FX-3-TONER CARTRIDGE COMPARTMENT TRANSFER CHARGING ROLLER (DO NOT TOUCH) PAPER RELEASE LEVER FIXING ASSEMBLY FRONT COVER 2-22 Setting Up Your FAX-L360 Chapter 2

49 Rear View REAR COVER POWER CONNECTOR Setting Up Your FAX-L360 USB PORT TELEPHONE LINE JACK HANDSET JACK EXTENSION PHONE JACK Chapter 2 Setting Up Your FAX-L

50 The Operation Panel ABC DEF GHI JKL MNO PQRS TUV WXYZ FAX-L360 In Use/Memory R Coded Dial Alarm Redial/Pause Receive Mode Resolution Set T ) Coded Dial button Press this button to dial a fax/telephone number that you have registered for coded speed dialling. * R button Press this button to dial an outside line access number when the unit is connected through a switchboard (PBX). See page 10-2 for details. + Document feed lever Set this lever to the left (a) for automatic document feed, or to the right (m) for manual document feed Setting Up Your FAX-L360 Chapter 2

51 D LCD display The LCD display shows messages and prompts during operation, and displays selections, text, numbers, and names when registering information. E In Use/Memory lamp Lights when the telephone line is being used or a document has been received in memory. F Alarm lamp This lamp flashes when an error occurs, or when the FAX-L360 is out of paper or toner. G One-Touch Speed Dial buttons Use these buttons for one-touch speed dialling. H Tone button Press this button to use tone dialling temporarily when your unit is set for pulse dialling. See page 10-6 for details. I Numeric buttons Use these buttons to enter numbers and names when registering information, and to dial fax/telephone numbers that are not registered for automatic dialling. J Redial/Pause button Press this button to redial the last number that was dialled using the numeric buttons, or to enter pauses between digits when dialling or registering fax numbers. K F (Hook) button Allows you to dial, even with the optional handset still in the handset cradle. L Receive Mode button Use this button to select the receive mode for receiving faxes. M (Start/Copy) button Press this button to begin faxing, or copying. N Resolution button Press this button to select the resolution the FAX-L360 will use for the document you want to fax, or copy. Setting Up Your FAX-L360 Chapter 2 Setting Up Your FAX-L

52 O (Stop) button Press this button to cancel sending, receiving, or any other operation. P Set button Press this button to select a menu item when registering information. Q One-Touch Speed Dial panel Open this panel to access the registration buttons Setting Up Your FAX-L360 Chapter 2

53 Special Function Buttons (One-Touch Speed Dial panel open) Data Delayed Registration Transmission Polling Memory Reference Report Clear Space D.T. Setting Up Your FAX-L360 Data Registration button Use this button to register user s data, speed dialling, and other important settings for sending and receiving. Delayed Transmission button Press this button to register a time for delayed sending. Polling button Use this button to set a document for polling sending, and to poll the other fax to receive a document. Memory Reference button Use this button to delete or resend documents stored in memory, or to print a list of documents in memory. Report button Use this button to print activity reports. See Chapter 12, Reports and Lists for details. D.T. button* Press this button to confirm the dial tone when dialling a number. See page 10-5 for details. * This feature is available for certain countries only. Chapter 2 Setting Up Your FAX-L

54 + button Use this button to enter a + sign when registering your fax/telephone number. Space button Use this button to enter a space between letters and numbers when you are registering information. Clear button Use this button to clear an entire entry during information registration. u d Search buttons Use these buttons to scroll the display so you can see other options and selections in the menus during data registration. l r Cursor buttons Use these buttons to move the cursor left or right during data registration. Use also these buttons to check the documents stored in memory Setting Up Your FAX-L360 Chapter 2

55 The Toner Cartridge Handling and Storing Cartridges Do not expose the cartridge to direct sunlight or bright light for longer than five minutes. Do not open the drum protective shutter on the cartridge. If the drum surface is exposed to light and damaged, print quality may deteriorate. Setting Up Your FAX-L360 Do not stand the cartridge on end, and do not turn it upside down. If toner becomes caked in the cartridge, it may prove impossible to free it even by shaking the cartridge. Keep the cartridge away from computer screens, disk drives, and floppy disks. The magnet inside the cartridge may harm these items. HDD Never touch the drum protective shutter. When holding the cartridge avoid touching the drum protective shutter with your hands. Do not store the cartridge in direct sunlight. Avoid locations subject to high temperature, high humidity, or rapid changes in temperature. Store the cartridge between 0 and 35 C. Hold the cartridge as shown so that your hand is not touching the drum s protective shutter. Chapter 2 Setting Up Your FAX-L

56 Store the cartridge in its protective bag. Do not open the bag until you are ready to install the cartridge in the unit. Save the protective bag. You may need to repack and transport the cartridge at a later date. Do not store the cartridge in salty air or where there are corrosive gases such as from aerosol sprays. Do not remove the cartridge from the FAX-L360 unless necessary. Caution DO NOT PLACE THE CARTRIDGE IN FIRE. TONER POWDER IS FLAMMABLE Setting Up Your FAX-L360 Chapter 2

57 Installing/Replacing the Toner Cartridge The FAX-L360 uses a Canon FX-3 toner cartridge. The procedure below explains how to install the cartridge for the first time, and how to replace it when the toner runs out. Note When the message CHANGE CARTRIDGE appears, the toner in the cartridge may simply be unevenly distributed. Before replacing the cartridge, follow the instructions on page to evenly distribute the toner. If after doing this the message remains displayed or the print quality is low, replace the cartridge as described below. Canon makes numerous cartridges. However, the FX-3 toner cartridge is the only one which Canon recommends you to use with your FAX-L Remove any documents and/or printed pages from the unit. Setting Up Your FAX-L Make sure the FAX-L360 is plugged in. 3. Open the front cover by lifting the right side release latch of the unit. Lift the cover forward to its open position. Chapter 2 Setting Up Your FAX-L

58 Caution Do not open the front cover without lifting the release latch as this may cause damage to your unit. 4. If replacing a used cartridge, hold the cartridge by its handle and remove it as shown. HANDLE Dispose of the toner cartridge properly. To recycle your used cartridge, simply follow the instructions included with your new FX-3 toner cartridge Setting Up Your FAX-L360 Chapter 2

59 5. Remove the new FX-3 toner cartridge from its protective bag. Save the protective bag the cartridge comes in. You may need to repack the cartridge later. 6. Gently rock the cartridge from side to side several times to distribute the toner evenly inside the cartridge. Poor print quality may result if the toner becomes unequally distributed inside the cartridge. Setting Up Your FAX-L360 Chapter 2 Setting Up Your FAX-L

60 7. Place the cartridge on a flat, clean surface, and steady it with one hand. Remove the seal by gently pulling on the plastic tab with your other hand. Use a firm, even pull to remove the plastic seal. To avoid breaking the seal, do not jerk on it unevenly. SIDE VIEW PULL IN THIS DIRECTION TOP VIEW PULL IN THIS DIRECTION 2-34 Setting Up Your FAX-L360 Chapter 2

61 8. Insert the toner cartridge into the unit. Align the tabs on the left and right sides of the cartridge with the rails inside the unit. Slide the cartridge into position. Always hold the cartridge by its handle when inserting it in the unit. HANDLE Setting Up Your FAX-L Gently press the cartridge into the unit as far as it will go. Press down and back on the cartridge s handle. Chapter 2 Setting Up Your FAX-L

62 10. Close the front cover. Use both hands to lift the cover back to its closed position Setting Up Your FAX-L360 Chapter 2

63 Loading Recording Paper When the message LOAD PAPER appears in the LCD display, you need to add paper to the paper cassette or the multi-purpose tray. Here are a few tips you should follow when you load paper into the paper cassette or the multi-purpose tray. Be sure to load paper of the correct size, weight, and quantity recommended for your FAX-L360. (See Chapter 4, Paper Handling. ) Stack the paper so that the top and bottom edges and sides are straight and even before placing it in the paper cassette/the multi-purpose tray. Do not print on both sides of the paper. Doing so may cause several sheets to feed into the unit at the same time. Let the paper run out before you refill the paper cassette/or multi-purpose tray. Avoid mixing new stock with paper already loaded in the paper cassette or multi-purpose tray as the illustration shown below. When adding new stock to the cassette or multi-purpose tray, be sure to remove the remaining paper on the cassette or tray and reload it together with the new stock. Failure to do so may cause paper jams. Setting Up Your FAX-L360 Chapter 2 Setting Up Your FAX-L