Multi Panel options. SIMATIC WinAC MP 2/169

Transcription

1 Siemens AG 011 Operator panels Overview Application The WinAC MP is a new, rugged software PLC for all SIMATIC HMI Multi Panel platforms. It has been developed for smaller and medium-sized applications that do not depend on the last millisecond and costs are in the forefront. The WinAC uses familiar tools such as STEP 7 V5.4 SP4 or higher and WinCC flexible as of 008 SP1 Standard or WinCC Comfort V11 or higher. This makes it possible to upgrade or switch without any extra training for new tools. The I/Os are connected via PROFIBUS DP. Here, ET I/O modules up to technology modules are available. WinAC MP, the software PLC based on Windows CE An optimized version is available for all current MP platforms The economical solution for all applications in combination with a rugged hardware platform Ideal for tasks on the machine level, saves space and costs Best service concept, backup/restore of all data on a standard SD card, standard Multi Media Card or standard USB stick Design Versions Different WinAC MP versions are available. The versions define CPU performance classes. The versions are optimized for the Multi Panel platforms. These versions, namely WinAC MP 177 and 77 to 377, are based roughly on the hardware CPUs 314, 315 and 317. They have similar quantity frameworks but are not a 1:1 copy. All limit values, e.g. number of bit memories, DBs, FCs, I/Os, etc., are preset as with a hardware CPU and cannot be changed by the user. Detailed technical data is provided in the "Technical data" section. Siemens ST 80 / ST PC 011 /169

2 Operator panels Siemens AG 011 Function The principle of operation and the instruction set of the WinAC MP is basically identical to a hardware CPU. The settings Programming Programming for the WinAC MP-specific parameters are implemented by means of the Hardware Config. Since WinAC MP and HMI application share a processor, however, there is a special response regarding the timing of the WinAC MP. All PLC commands are more quickly processed multiple times faster than on a hardware CPU, but this is required to created time reserves for the HMI application. The potential for time optimization improves with larger PLC programs. In WinAC MP 008, a fixed processing time must be set for HMI-RT, HMI options and communications. The default for this time is 50 ms. Users can change this time to achieve optimal performance of the application. In practice, this means an OB1 executes faster on a soft CPU and the time gained can be used for HMI Runtime. Another advantage of the WinAC MP is that the HMI application can always be interrupted by WinAC MP time and process alarms. Fast key response times can also be used with the implemented function "DP direct keys" with the WinAC MP. This provides another performance advantage of the WinAC MP. 1) Not with version WinAC MP 177. The programming in accordance with IEC and the configuration of WinAC MP are performed using STEP 7 V5.4 SP4 (or higher) and the SIMATIC engineering tools for production engineering. Thus, all SIMATIC programming languages for WinAC MP are available as well. The SIMATIC programming languages comply with the standard EN This reduces the familiarization and training overhead. CFC, SCL, as well as S7-Graf 1) and ProAgent 1) are also supported. In addition, program modules that have been programmed for SIMATIC S7 hardware CPUs can be reused in WinAC MP without modifications as long as they were not designed for special features of a SIMATIC S7 CPU. Integration I/Os The I/O can be connected via PROFIBUS DP. Standard components such as ET00 and the modules that can be used within are utilized. Diverse technological components can also be used with the ET00M in this constellation. In addition to normal standard ET I/Os, the following FM modules are released on the PROFIBUS: FM counter module FM 350- counter module (8-channel) FM 351 positioning module FM 35 cam controller FM 355- temperature control module FM 35-5 high-speed Boolean processor FM 353 positioning module for stepper motors FM 354 positioning module for servo motors FM 355 closed-loop control module /170 Siemens ST 80 / ST PC 011

3 Siemens AG 011 Operator panels Technical specifications 6ES EE00-0YA0 6ES EF01-0YA0 6ES EG01-0YA0 Product type designation WinAC MP 177 WinAC MP 77 WinAC MP 377 Memory Work memory integrated 18 Kibyte 56 Kibyte 51 Kibyte expandable No No No Load memory integrated RAM, max. 8Mbyte 8Mbyte 8Mbyte CPU-blocks DB Number, max. 51; FBs+FCs+DBs= ; FBs+FCs+DBs= ; FBs+FCs+DBs=048 FB Number, max. 51; FBs+FCs+DBs= ; FBs+FCs+DBs= ; FBs+FCs+DBs=048 FC Number, max. 51; FBs+FCs+DBs= ; FBs+FCs+DBs= ; FBs+FCs+DBs=048 OB Number, max Nesting depth per priority class additional within an error OB Counters, timers and their retentivity S7 counter Number of which retentive without battery -lower limit upper limit Retentivity -preset Counting range -lower limit upper limit IEC counter present Yes; SFB0, SFB1, SFB Yes; SFB0, SFB1, SFB Yes; SFB0, SFB1, SFB S7 times Number of which retentive without battery -lower limit upper limit Retentivity -preset Time range -lower limit 10 ms 10 ms 10 ms - upper limit 9990s 9990s 9990s IEC timer present Yes; SFB3, SFB4, SFB5 Yes; SFB3, SFB4, SFB5 Yes; SFB3, SFB4, SFB5 Data areas and their retentivity retentive data area in total 64 Kibyte 18 Kibyte 56 Kibyte (incl. times, counters, flags), max. Flag Number, max. Kibyte Kibyte 4Kibyte Retentivity available Yes Yes Yes Siemens ST 80 / ST PC 011 /171

4 Operator panels Siemens AG 011 Technical specifications (continued) 6ES EE00-0YA0 6ES EF01-0YA0 6ES EG01-0YA0 Product type designation WinAC MP 177 WinAC MP 77 WinAC MP 377 Data blocks Number, max Local data per priority class, max byte; for all priority classes byte; for all priority classes byte; for all priority classes Address area I/O address area Inputs Kibyte 4Kibyte 8Kibyte Outputs Kibyte 4Kibyte 8Kibyte Process image Inputs 1Kibyte Kibyte Kibyte Outputs 1Kibyte Kibyte Kibyte Inputs, adjustable 1Kibyte Kibyte Kibyte Outputs, adjustable 1Kibyte Kibyte Kibyte Inputs, default 51 byte 51 byte 51 byte Outputs, default 51 byte 51 byte 51 byte consistent data, max. 3 byte 3 byte 3 byte Hardware configuration Number of DP masters integrated Time of day Runtime meter Number Number/Number range 0 to 7 0 to 7 0 to 7 1st interface DP master Number of connections, max Services - PG/OP communication Yes Yes Yes -Routing Yes Yes Yes - Global data communication No No No - S7 basic communication No No No - S7 communication Yes Yes Yes - Equidistance mode support No No No - SYNC/FREEZE Yes Yes Yes - Activation/deactivation of DP Yes Yes Yes slaves - DPV1 Yes Yes Yes Transmission rate, max. 1 Mbit/s 1 Mbit/s 1 Mbit/s Number of DP slaves, max Address area - Inputs, max. Kibyte 4Kibyte 8Kibyte - Outputs, max. Kibyte 4Kibyte 8Kibyte Communication functions PG/OP communication Yes Yes Yes Routing Yes Yes Yes Global data communication supported No No No S7 basic communication supported No No No S7 communication supported Yes; PUT/GET, BSEND/BRCV, USEND/URCV Yes; PUT/GET, BSEND/BRCV, USEND/URCV as server Yes Yes Yes as client Yes Yes Yes User data per job, max. 480 byte 480 byte 480 byte Yes; PUT/GET, BSEND/BRCV, USEND/URCV /17 Siemens ST 80 / ST PC 011

5 Siemens AG 011 Operator panels Technical specifications (continued) 6ES EE00-0YA0 6ES EF01-0YA0 6ES EG01-0YA0 Product type designation WinAC MP 177 WinAC MP 77 WinAC MP 377 Number of connections overall 8; (max. 8 DP, rest PROFINET) 16; (max. 8 DP, rest PROFINET) 3; (max. 8 DP, rest PROFINET) usable for PG communication - reserved for PG communication usable for OP communication - reserved for OP communication usable for routing Number of logical connections (also in network), max. S7 message functions Process diagnostic messages Yes Yes Yes Test commissioning functions Status/control Status/control variable Yes; Status blocks, single step, breakpoint Yes; Status blocks, single step, breakpoint Yes; Status blocks, single step, breakpoint Forcing Forcing No No No Diagnostic buffer present Yes Yes Yes Number of entries, max ; preset ; preset ; preset 10 Operating systems Windows CE Yes; Version 5.0 or higher Yes; Version 5.0 or higher Yes; Version 5.0 or higher Configuration software STEP 7 Yes; STEP7 V5.4 SP4 or higher Yes; STEP7 V5.4 SP4 or higher Yes; STEP7 V5.4 SP4 or higher WinCC flexible Compact Yes; WinCC flexible 008 SP1 No No WinCC flexible Standard Yes; WinCC flexible 008 SP1 Yes; WinCC flexible 008 SP1 Yes; WinCC flexible 008 SP1 WinCC flexible Advanced Yes; WinCC flexible 008 SP1 Yes; WinCC flexible 008 SP1 Yes; WinCC flexible 008 SP1 programming Programming language -LAD Yes Yes Yes -FBD Yes Yes Yes -STL Yes Yes Yes -SCL Yes Yes Yes -CFC Yes Yes Yes Software libraries - Process diagnostics Yes; System error messages Yes; System error messages, ProAgent (S7-Graph) Cycle time monitoring can be set Yes Yes Yes preset 6000ms 6000ms 6000ms Online languages Number 1; English 1; English 1; English Yes; System error messages, ProAgent (S7-Graph) Siemens ST 80 / ST PC 011 /173

6 Operator panels Siemens AG 011 Ordering data Order No. Order No. WinAC MP, 6ES EE00-0YA0 version WinAC MP 177 ) incl. a Single License for MP 177 on and electronic documentation WinAC MP, 6ES EF01-0YA0 version WinAC MP 77 ) incl. a Single License for MP 77 on and electronic documentation WinAC MP, 6ES EG01-0YA0 version WinAC MP 377 ) incl. a Single License for MP 377 on and electronic documentation Complete pre-assembled packages Package MP 177 6" Touch E 6AV6 65-JC01-AA0 MP 177 6" Touch WinAC MP Version 177 Single License for MP 177 on USB flash drive 1) Package MP 77 8" Touch E 6AV6 65-3MC01-1AA0 MP 77 8" Touch WinAC MP Version 77 Single License for MP 77 on Package MP 77 8" Key E 6AV6 65-3LC01-1AA0 MP 77 8" Key WinAC MP Version 77 Single License for MP 77 on Package MP 77 10" Touch E 6AV6 65-3PC01-1AA0 MP 77 10" Touch WinAC MP Version 77 Single License for MP 77 on E: Subject to export regulations: AL: 9I999 and ECCN: 5D00ENCU Package MP 77 10" Key E 6AV6 65-3NC01-1AA0 MP 77 10" Key WinAC MP Version 77 Single License for MP 77 on Package MP 377 1" Touch E 6AV6 65-4FC01-AA0 MP 377 1" Touch Package MP 377 1" Key E 6AV6 65-4EC01-AA0 MP 377 1" Key Package MP " Touch E 6AV6 65-4GC01-AA0 MP " Touch Package MP " Touch E 6AV6 65-4HC01-AA0 MP " Touch 1) Can only be used for license handling ) UCL version on request /174 Siemens ST 80 / ST PC 011