PCB Keyswitches NEW. KN 19 - Short-travel main switch 4-85 KN 19 - Short-travel main switch 4-86

Transcription

1 Page MICON 5 - Short-travel keyswitches - 3 MICON 5 - Short-travel keyswitches - MICON 5 - Plungers round, not illuminable - 8 MICON 5 - Plungers square, illuminable - 12 NEW RACON - Short-travel keyswitches - 17 RACON 8 - Short-travel keyswitch - 18 RACON 12 - Short-travel keyswitch - 22 RACON 12 V - Short-travel keyswitch with vertical adapter - 26 RACON 12 i - Short-travel keyswitch - 28 RACON - Special accessories - 32 RK 90 II - Key cap system for RACON 12 with individual sealing - 36 NEW RF - Short-travel keyswitches - 39 RF 15 - Short-travel keyswitch - 2 RF 15 N - Short-travel keyswitch - 8 RF 15 R - Short-travel keyswitch - 52 RF 15 H - Short-travel keyswitch - 58 RF 15 - Signal indicator - 62 RF 19 - Short-travel keyswitch - 66 RF 19 H - Short-travel keyswitch - 72 RF 19 - Signal indicator - 76 RF 15/19 - Special accessories - 80 KN 19 - Short-travel main switch - 85 KN 19 - Short-travel main switch - 86 RK 90 - Keycaps - 89 RK 90 - Keycaps, plastic, 9 x 9 mm - 92 RK 90 - Keycaps, plastic, 1 mm - 9 RK 90 - Keycaps, aluminum, 1 x 1 mm - 98 RK 90 - Special accessories RG 85 III - Short-travel system RG 85 III - Keyswitch RG 85 III - Keylock switch RG 85 III - Signal indicator, without lens - 11 RG 85 III - Accessories RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, illuminable - 13 RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, illuminable - 10 RS 76 - Keycaps, not illuminable - 12 RS 76 - Keycaps, illuminable - 1 RS 76 - Keycaps, with legend, two-shot moulded/keycap sets - 18 RS 76 - Accessories Keylock and rotary switches for PCB MICROMEC - Keylock switch IP5-15 EUROLOCKS - Keylock switch IP5-158 Priority keylock switch IP5-160 Rotary switch IP

2 Examples for Applications Standards MICON 5 CE-Conformity The products of the Chapter "" can relating to the CE-conformity according to the Low-Voltage Directive 73/23/EWG be divided into the following groups: All products with an operating voltage U B > 50 V F. ex. Short-Travel Main Switch KN 19, for this product the Low-Voltage Directive 73/23/EWG applies. RF 15 All products with an operating voltage U B < 50 V F. ex. MICON, RACON, RF 15, RS 76, for these components no directive applies. Single parts, accessories and illumination No directive applies for these products. EMC-Law The components of this catalogue are within the meaning of the law concerning the electromagnetic conformity (= EMC-Law) "basic components as, for ex., switches, signal lamps or like" and, therefore, do not fall within the scope of the EMC-Law. RG 85 III System Declarations of Conformity Declarations of conformity for all concerned products are available and can be delivered upon request. Please always state the exact order reference of the respective product. Marking The marking will be corresponding to the Low-Voltage Directive 73/23/EWG resp. the Directive "CE-Marking 93/68/EWG" either on the packing or on the product itself or on the shipping documents. RF 15 with RK 90 System UL-approval for MICON 5, RACON 8/12, Short-Travel Keyswitches RF 15/19 Data entry systems wich are built with Rafi short-travel switches according to our design proposals meet the requirements of the UL approvals for the American market. UL file no. for KN 19: E UL file no. for data entry systems: E

3 MICON 5 - Short-travel keyswitches General Data Short-travel switch range MICON 5, with sealed contact system, clear key click and extremely reliable switching. Use under overlay or under keycaps RK 90. THT and SMT versions which can be mounted automatically. Content MICON 5 - Short-travel keyswitches - MICON 5 - Short-travel keyswitch, SMT Standard - 6 MICON 5 - Short-travel keyswitch, SMT low - 7 MICON 5 - Short-travel keyswitch, THT Standard - 7 NEW MICON 5 - Plungers round, not illuminable - 8 MICON 5 - Plunger opaque, round, not illuminable - 9 MICON 5 - Plungers square, illuminable - 12 MICON 5 - Plunger square, illuminable, 11 x 11 mm - 13 MICON 5 - Plunger square, illuminable, 1.5 x 1.5 mm - 1 MICON 5 - Plunger square, illuminable, 18 x 18 mm - 15 NEW NEW MICON - 3

4 MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitches General Data MICON 5 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, MICON keyswitches should be combined with plungers. The features at a glance: - Wave soldering bath for THT versions - Reflow soldering for SMT version - Vapour phase soldering for SMT versions - Manual soldering Technical Data MICON Dimensions Length of housing Width of housing Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force F1 (±20%) Switching travel S2 (±0.15 mm) Electrical characteristics Rated voltage min. Rated voltage max. 6. mm 5.1 mm soldering snap-action contact 1 NO Au no 0.02 V 35 V Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new Rated voltage restistance AC Insulation resistance 0.01 ma 100 ma 1 W 100 m 250 V 10 9 Other specifications Ambient temp. operating min. -0 C Ambient temp. operating max. +90 C Resistance to environment IEC , -30,-33, -78 Operating life (test force) Solder heat resistance / Solderability Flammability of materials UL 9 V1 Packing Produkt code -

5 MICON 5 - Short-travel keyswitches MICON 5 Circuit Diagram MICON 5 Force-Travel Diagram Operating force F 1 : Switching travel S 2 : MICON 5 Product Code acc. to DIN EN ISO 9001 (EN ISO 802) year week day shift type machine Traceability acc. to (EN ISO 802) DIN EN ISO 9001, 2000, A 7-digit code is printed on the housing of the keyswitch. This code informs about production date, production shift and type of product. MICON 5 SMT Version, Tape and Reel Drawing MICON - 5

6 MICON 5 - Short-travel keyswitches NEW MICON 5 - Short-travel keyswitch, SMT Standard 3.85 ± ± ± ±0.05 Terminals SMT SMT SMT SMT Solder heat resistance / Solderability E DIN IEC E DIN IEC E DIN IEC E DIN IEC Operating force F1 (±20%) Switching travel S2 (±0,15 mm) Operating life (test force) Produkt code Order no. 3.0 N 0.7 mm 1,000,000 ( N) X / N 0.8 mm 250,000 (6 N) Z / N 0.9 mm 1,000,000 (8 N) W / N 1.1 mm 250,000 (12 N) Y /0000 Technical data see page - Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: ), mounting with collect and place head Recommendation for screen printing: 150 μm stencil with 10% reduction of the pad size. MICON - 6 Stock items are marked by bold printed order numbers.

7 MICON 5 - Short-travel keyswitches MICON 5 - Short-travel keyswitch, SMT low NEW 3.5 ± ± ± ± 0.05 Terminals SMT SMT SMT Solder heat resistance / Solderability E DIN IEC E DIN IEC E DIN IEC Operating force F1 (±20%) Switching travel S2 (±0,15 mm) Operating life (test force) Produkt code Order no. 3.0 N 0.6 mm 1,000,000 ( N) S / N 0.7 mm 250,000 (6 N) T / N 0.7 mm 1,000,000 (8 N) R /0000 Technical data see page - Packing: in tape, reel with 2100 pieces Keycaps see RK 90 Mounting hints: Special pipette (Siemens Siplace order no.: ), mounting with collect and place head Recommendation for screen printing: 150 μm stencil with 10% reduction of the pad size. MICON 5 - Short-travel keyswitch, THT Standard 3.80 ± Pad-Ø ± ± ±0.10 Hole-Ø 0.70 MICON Terminals Solder heat resistance / Solderability Operating force F1 (±20%) Switching travel S2 (±0,15 mm) Operating life (test force) Produkt code Order no. NEW THT E DIN IEC N 0.7 mm 1,000,000 ( N) O /0000 THT E DIN IEC N 0.8 mm 250,000 (6 N) Q /0000 THT E DIN IEC N 0.9 mm 1,000,000 (8 N) N /0000 THT E DIN IEC N 1.1 mm 250,000 (12 N) P /0000 Technical data see page - Packing: in tubes with 102 pieces Keycaps see RK 90 Stock items are marked by bold printed order numbers. - 7

8 MICON 5 - Short-travel keyswitches NEW MICON 5 - Plungers round, not illuminable General Data A - Height of keyswitch: SMT type: 3.85 mm, THT type: 3.80 mm D - Length of spacer D = GH - KP - FP FD - Front panel cut-out FD = ST + 1 mm FP - Front panel thickness GH - Overall height: GH = A + L (SMT type), GH = A + L 1 (THT type) KP - Thickness of overlay + embossing KS - Glue webs for overlay, min. 3 mm L1 - Length of plunger above keyswitch L1 = GH - A L - Overall length of plunger L = L mm (min. 3 mm) RM - Key grid RM = FD + KS ST - Diameter of plunger The plungers can only be combined with MICON 5 version Standard (red bubble). Technical Data MICON General information Plunger diameter/size Length of plunger L - 8

9 MICON 5 - Short-travel keyswitches MICON 5 - Plunger opaque, round, not illuminable NEW Plunger diameter ST/size Length of plunger L Order no. 6.0 mm 3.00 mm / mm 3.5 mm / mm 3.95 mm / mm.5 mm / mm 7.15 mm / mm 9.95 mm / mm 3.00 mm / mm 3.5 mm / mm 3.95 mm / mm.5 mm / mm 5.50 mm / mm 7.15 mm / mm 9.95 mm / mm mm /0200 MICON 11.5 mm 3.00 mm / mm 3.5 mm / mm 3.95 mm / mm.5 mm / mm 5.50 mm / mm 7.15 mm / mm 9.95 mm / mm mm /0200 Stock items are marked by bold printed order numbers. - 9

10 MICON 5 - Short-travel keyswitches Plunger diameter ST/size Length of plunger L Order no. 1.5 mm 3.00 mm / mm 3.5 mm / mm 3.95 mm / mm.5 mm / mm 7.15 mm / mm 9.95 mm / mm 3.00 mm / mm 3.5 mm / mm 3.95 mm / mm.5 mm / mm 7.15 mm / mm 9.95 mm /0200 Technical data see page - 8 Can only be combined with MICON 5 version Standard (red bubble) MICON - 10 Stock items are marked by bold printed order numbers.

11 MICON 5: Just feel it. AUTOMOTIVE INSTRUMENTATION-CONTROL- AUTOMATION MEDICAL TECHNOLOGY There is no miniature keyswitch which has a better tactile and acoustic feedback than the new RAFI MICON 5 short-travel keyswitch. The little one shows its excellence under keycaps, membrane overlays or elastic seals. Outstanding tactile feedback and absolutely reliable switching behaviour in demanding applications, including hostile environments. MICON 5 test it! For samples and information, please contact: info@rafi.de RAFI GmbH & Co. KG D Berg/Ravensburg Phone: , Fax: info@rafi.de

12 MICON 5 - Short-travel keyswitches NEW MICON 5 - Plungers square, illuminable General Data Description A - Height of keyswitch: SMT = 3.85 mm, THT = 3.80 mm B - Width of plunger (11 x 11 mm, 1,5 x 1,5 mm or 18 x 18 mm) D - GH - FP mm (= embossing height 0.35 mm + glue height 0.15 mm) FD - Front panel cut-out: B + 1 mm FP - Thickness of front plate GH - Overall height: A mm KS - Glue strip min. 3 mm R - Grid size: FD + KS The plungers can only be combined with MICON 5 version Standard (red bubble). Technical Data General information Overall height GH Colour of lens MICON - 12

13 MICON 5 - Short-travel keyswitches MICON 5 - Plunger square, illuminable, 11 x 11 mm NEW Overall height GH Colour of lens Order no mm red / mm green / mm yellow / mm white / mm blue / mm red / mm green / mm yellow / mm white / mm blue / mm opaque blue /0600 Technical data see page - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON Stock items are marked by bold printed order numbers. - 13

14 MICON 5 - Short-travel keyswitches NEW MICON 5 - Plunger square, illuminable, 1.5 x 1.5 mm Overall height GH Colour of lens Order no mm red / mm green / mm yellow / mm white / mm blue / mm red / mm green / mm yellow / mm white / mm blue /2600 Technical data see page - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON - 1 Stock items are marked by bold printed order numbers.

15 MICON 5 - Short-travel keyswitches MICON 5 - Plunger square, illuminable, 18 x 18 mm NEW Overall height GH Colour of lens Order no mm red / mm green / mm yellow / mm white / mm blue / mm red / mm green / mm yellow / mm white / mm blue /2600 Technical data see page - 12 Can only be combined with MICON 5 version Standard (red bubble) MICON Stock items are marked by bold printed order numbers. - 15

16

17 RACON - Short-travel keyswitches General Data RACON short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available (suitable for automatic assembly). Content RACON 8 - Short-travel keyswitch - 18 RACON 8 - Short-travel keyswitch, THT outward - 20 RACON 8 - Short-travel keyswitch, THT inward - 20 RACON 8 - Short-travel keyswitch, SMT gullwing (Z) terminals - 21 RACON 12 - Short-travel keyswitch - 22 RACON 12 - Short-travel keyswitch solder terminals for PCB, outward - 2 RACON 12 - Short-travel keyswitch solder terminals for PCB, inward - 25 RACON 12 - Short-travel keyswitch SMT gullwing (Z) terminals - 25 RACON 12 V - Short-travel keyswitch with vertical adapter - 26 RACON 12 V - Short-travel keyswitch with vertical adapter - 27 RACON 12 i - Short-travel keyswitch - 28 RACON 12 i - Short-travel keyswitch - 30 RACON - Special accessories - 32 Plunger round - 32 Square plunger for membrane data entry system - 3 RACON RK 90 II - Key cap system for RACON 12 with individual sealing - 36 RK 90 II - Sealing frame - 37 NEW - 17

18 RACON - Short-travel keyswitches RACON 8 - Short-travel keyswitch product code (F1) F production day (21.) production shift (1) production year (2002) production month (03.) General Data RACON 8 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON keyswitches should be combined with plungers. The features at a glance: - Wave soldering bath for THT versions Technical Data RACON Dimensions Length of housing Width of housing Height of housing Mechanical design Terminals Contact system Contact arrangement Contact materials Mechanical characteristics Operating force Electrical characteristics Rated voltage min. Rated voltage max. 8. mm 8. mm soldering snap-action contact 1 NO Au no 3.3 ±0.6 N 0.3 ±0.1 mm 0.02 V 35 V Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max ma 100 ma 1 W 100 m 10 9 Other specifications Ambient temp. operating min. -0 C Ambient temp. operating max. +90 C Resistance to environment -30,-33 and -78 Operating life 1,000,000 resistance Flammability of materials UL 9 HB Packing Produkt code - 18

19 RACON - Short-travel keyswitches RACON 8, Typical System Assembly with Plunger under Overlay THT terminal for PCB, outward THT terminal for PCB, inward SMT gullwing (Z) terminal 0.10 GH L A GH L A Variable Declaration THT terminal outward THT terminal inward SMT-terminal A GH L Height of keyswitch Overall height Length of plunger GH = A + L L = GH - A +/- 0.1 mm A =.90 GH = A + L mm L = GH - A mm RACON 8, PCB Hole Pattern, Smallest Grid THT terminal for PCB, outward THT terminal for PCB, inward SMT gullwing (Z) terminal view on component side view on component side view on component side RACON 8, SMT Terminal, Tape and Reel Drawing Circuit Diagram RACON 8 Typical Force-Travel Diagram RACON Switching symbols acc. to IEC 617 form X (twice interrupting) - 19

20 RACON - Short-travel keyswitches Typical accessories RACON 8 - Short-travel keyswitch Description Photo Order no. Additional accessories see page Spacer, round, length 6.25 mm, red / , - 82, 5-30 Plunger round / RK 90 - Keycap body, for lenses 9 x 9 mm / For other plungers, refer to the chapter RACON special accessories ; for keycaps, refer to the chapter RK 90. RACON 8 - Short-travel keyswitch, THT outward PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance THT outward 3.3 ±0.6 N E DIN IEC Technical data see page - 18 For keycaps refer to chapter RK 90, plungers see RACON special accessories. Produkt code Packing Order no. A1 tubes à 60 piece /0000 RACON 8 - Short-travel keyswitch, THT inward RACON PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance THT inward 3.3 ±0.6 N E DIN IEC Produkt code Packing Order no. B1 tubes à 60 piece /0000 Technical data see page - 18 For keycaps refer to chapter RK 90, plungers see RACON special accessories Stock items are marked by bold printed order numbers.

21 RACON - Short-travel keyswitches RACON 8 - Short-travel keyswitch, SMT gullwing (Z) terminals ±0.10(A) PCB footprint, view on component side Terminals Operating force Solderability / Solder heat resistance SMT Gullwing (Z) terminals 3.3 ±0.6 N E DIN IEC Produkt code Packing Order no. C1 tape and reel à 1000 pieces /0000 Technical data see page - 18 For keycaps refer to chapter RK 90, plungers see RACON special accessories. RACON Stock items are marked by bold printed order numbers. - 21

22 RACON - Short-travel keyswitches RACON 12 - Short-travel keyswitch product code (F1) F production day (21.) production shift (1) production year (2002) production month (03.) General Data RACON 12 short-travel keyswitches offer an extremely high switching reliability while needing very little space. They can be arranged as single keys, in rows or key blocks. When arranged under an overlay, RACON keyswitches should be combined with plungers. The features at a glance: - Wave soldering bath for THT versions Technical Data RACON Dimensions Length of housing Width of housing Overall height Mechanical design Terminals Contact system Contact arrangement Contact materials Mechanical characteristics Operating force Electrical characteristics Rated voltage min. Rated voltage max. 12 mm 12 mm soldering snap-action contact 1 NO Au no 0.02 V 35 V Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max ma 100 ma 1 W 100 m 10 9 Other specifications Ambient temp. operating min. -0 C Ambient temp. operating max. +90 C Resistance to environment Operating life 1,000,000 resistance Flammability of materials UL 9 HB Packing Produkt code - 22

23 RACON - Short-travel keyswitches RACON 12, Typical System Assembly with Plunger under Overlay THT terminal for PCB, outward THT terminal for PCB, inward SMT gullwing (Z) terminal 0.10 GH A GH GH A L L A L Variable Declaration THT terminal outward THT terminal inward SMT-terminal A GH L Height of keyswitch Overall height Length of plunger GH = A + L L = GH - A +/- 0.1 mm A =.95 GH = A + L mm L = GH - A mm RACON 12, PCB Hole Pattern, Smallest Grid THT terminal for PCB, outward THT terminal for PCB, inward SMT gullwing (Z) terminal Ø ± 0.10 RMmin =15.2 view on component side 5.00 RMmin = Ø ± 0.10 RMmin = view on component side 5.00 RMmin = max min RMmin = view on component side RMmin = RACON 12, SMT Terminal, Tape and Reel Drawing Circuit Diagram RACON 12 Typical Force-Travel Diagram RACON Switching symbols acc. to IEC 617 form X (twice interrupting) - 23

24 RACON - Short-travel keyswitches Typical accessories RACON 12 - Short-travel keyswitch Description Photo Order no. Additional accessories see page Spacer, round, length 6.25 mm, red / , - 82, 5-30 Square plunger for membrane data entry system / Plunger round / RK 90 - Keycap body, for lens 1 -module / For other plungers, refer to the chapter RACON special accessories ; for keycaps, refer to the chapter RK 90. RACON 12 - Short-travel keyswitch solder terminals for PCB, outward PCB footprint, view on component side Terminals Operating force Switching travel Solderability / Solder heat resistance THT outward 3.6 ±0.7 N 0.61 ±0.1 mm E DIN IEC Technical data see page - 22 For keycaps refer to chapter RK 90, plungers see RACON special accessories. Produkt code Packing Order no. A1 tubes à 5 pieces /0000 RACON - 2 Stock items are marked by bold printed order numbers.

25 RACON - Short-travel keyswitches RACON 12 - Short-travel keyswitch solder terminals for PCB, inward PCB footprint, view on component side Terminals Operating force Switching travel Solderability / Solder heat resistance THT outward 3.6 ±0.7 N 0.61 ±0.1 mm E DIN IEC Produkt code Packing Order no. B1 tubes à 5 pieces /0000 Technical data see page - 22 For keycaps refer to chapter RK 90, plungers see RACON special accessories. RACON 12 - Short-travel keyswitch SMT gullwing (Z) terminals 5.0 ± Terminals Operating force Switching travel Solderability / Solder heat resistance SMT Gullwing (Z) SMT Gullwing (Z) SMT Gullwing (Z) Technical data see page ±0.7 N 0.61 ±0.1 mm E DIN IEC ±1.6 N 0.7 ±0.1 mm E DIN IEC ±2.5 N 0.73 ±0.1 mm E DIN IEC ±0.10 (A) PCB footprint, view on component side Produkt code Packing Order no. C1 ZD ZE tape and reel à 750 pieces tape and reel à 750 pieces tape and reel à 750 pieces / / /0000 RACON For keycaps refer to chapter RK 90, plungers see RACON special accessories. Stock items are marked by bold printed order numbers. - 25

26 RACON - Short-travel keyswitches RACON 12 V - Short-travel keyswitch with vertical adapter General Data The RACON 12 V version can be used, for example, for PC plug-in boards and for measurement and control engineering applications. The vertical mounting adapter (support element) absorbs the operating force so that the pressure on the soldered terminals is reduced. For this mounting arrangement, the keyswitch is provided with two horizontal terminals on one side. Technical Data RACON Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force Switching travel Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) 1.5 mm 13.6 mm.95 mm soldering THT snap-action contact 1 NO Au no 3.6 ±0.7 N 0.61 ±0.1 mm 0.02 V 35 V 0.01 ma 100 ma 1 W Contact resistance when new max. Insulation resistance 100 m 10 9 Other specifications Ambient temp. operating min. -0 C Ambient temp. operating max. +80 C Storage temperature min. -50 C Storage temperature max. +85 C (product) Storage temperature max. +85 C (in tube) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life 1,000,000 Solderability / solder heat E DIN IEC resistance Flammability of materials Packing Produkt code F 1 UL 9 HB in boxes à 100 pieces - 26

27 RACON - Short-travel keyswitches PCB footprint RACON 12V Circuit Diagram RACON 12V Ø 1.20 (2x) 6.00 ± Ø 1.50 (3x) ± ± 0.20 Drilling hole diagramm view on component side Hatched areas: In this area no components and no conductor tracks view on component side Switching symbols acc. to IEC 617 form X (twice interrupting) RACON 12 V - Short-travel keyswitch with vertical adapter Terminals Contact arrangement Produkt code Packing Order no. THT 1 NO F 1 in boxes à 100 pieces /0000 Technical data see page - 26 Plungers for overall height of 6.5 mm may not be used. RACON Stock items are marked by bold printed order numbers. - 27

28 RACON - Short-travel keyswitches RACON 12 i - Short-travel keyswitch General Data Application note Low-profile keyboards with RACON 12 i components should be designed with a grid spacing of 15.2 mm. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. If our RK 90 system design is used, we recommend the 9 x 9 mm keycaps. Technical Data RACON General information Colour of lens Recommended key grid Key grid min. Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force Switching travel Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max x 15.2 mm 12.5 x 12.5 mm mm mm 9.7 mm soldering THT snap-action contact 1 NO Au fully illuminated 2 LED standard 2 mm 3.3 ±0.6 N 0.3 ±0.1 mm 0.02 V 35 V 0.01 ma 100 ma 1 W 100 m Dielectric strength AC min. Insulation resistance 750 V 10 9 Electrical characteristics of LED LED rated current max. IF at red/green: 30, 25 C yellow: 50 ma LED current reduction red: 0.5 ma/degree C, beginning with 50 degree C yellow 0.8 ma/ degree C LED wavelength typ. red 639, green , yellow 590 LED forward voltage UF at 20 ma red: 1.8 V/20 ma, yellow: 1.9 V/20 ma LED breakdown voltage UR at min. 5 V/0.1 ma 25 C Other specifications Ambient temp. operating min. -0 C Ambient temp. operating max. +80 C Storage temperature min. Storage temperature max. (product) Storage temperature max. (intube) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life 1,000,000 Solderability / solder heat E DIN IEC resistance Flammability of materials UL 9 HB Packing tubes à 5 pieces - 28

29 RACON - Short-travel keyswitches RACON 12i typical system assembly RACON 12i smallest grid ± view on component side view on component side Explanation Recommended area embossing 0.35 mm at glue spacer thickness of 0.15 mm LED hole patterns Circuit Diagram RACON 12i (8x) LED view on component side Switching symbols acc. to IEC form X (twice interrupting) RACON - 29

30 RACON - Short-travel keyswitches RACON 12 i - Short-travel keyswitch illuminated area lens red Terminals Contact arrangement Illumination Colour of lens LED colour Order no. THT 1 NO fully illuminated 2 LED THT 1 NO fully illuminated 2 LED THT 1 NO fully illuminated 2 LED THT 1 NO fully illuminated 2 LED red red /0000 green green /0000 yellow yellow /0000 orange yellow /0000 Technical data see page - 28 If keycaps are used we recommend RK 90 keycaps 9 x 9 mm. RACON - 30 Stock items are marked by bold printed order numbers.

31

32 RACON - Short-travel keyswitches RACON - Special accessories Pict.: 8 mm General Data GH = L lenth oh plunger + A height of keyswitch (+ 0.1 mm for SMT versions) Front panel cut-out = size of plunger + 1 mm Plunger round GH A L Pict.: 8 mm Plunger diameter/size RACON version Length of plunger L Order no. 8 mm RACON 8 1, mm / mm RACON mm / mm RACON mm / mm RACON 8/12 1,9 mm / mm RACON 8/12 2 mm /0209 RACON 8 mm RACON 8/ mm / mm RACON 8/12,6 mm / mm RACON 8/12.7 mm / mm RACON 8/12.8 mm / mm RACON 8/12 7, mm / mm RACON 8/ mm / mm RACON 8/ mm / Stock items are marked by bold printed order numbers.

33 RACON - Short-travel keyswitches Plunger diameter/size RACON version Length of plunger L Order no mm RACON 8 1, mm / mm RACON mm / mm RACON mm / mm RACON 8/12 2 mm / mm RACON 8/ mm / mm RACON 8/12,6 mm / mm RACON 8/12.7 mm / mm RACON 8/12.8 mm / mm RACON 8/ mm / mm RACON 8/ mm / mm RACON 8 1, mm / mm RACON mm / mm RACON mm / mm RACON 8/12 2 mm / mm RACON 8/ mm / mm RACON 8/12,6 mm / mm RACON 8/12.7 mm / mm RACON 8/12.8 mm / mm RACON 8/12 7, mm / mm RACON 8/ mm / mm RACON 8/ mm / mm RACON mm /0209 RACON 19 mm RACON mm / mm RACON 8/12 2 mm / mm RACON 8/ mm / mm RACON 8/12.7 mm / mm RACON 8/12.8 mm / mm RACON 8/ mm /0209 Stock items are marked by bold printed order numbers. - 33

34 RACON - Short-travel keyswitches Plunger diameter/size RACON version Length of plunger L Order no. 19 mm RACON 8/ mm /0209 Front panel cut-out = Plunger diameter + 1 mm. Square plunger for membrane data entry system GH L A Plunger diameter/size RACON version Length of plunger L Order no. 1 x 1 mm RACON 12 THT 2.1 mm / x 1 mm RACON 12 THT.8 mm / x 1 mm RACON 12 THT 7.6 mm / x 1 mm RACON 12 SMT 2 mm / x 1 mm RACON 12 SMT.7 mm / x 1 mm RACON 12 SMT 7.5 mm /0209 Front panel cut-out = 15 x 15 mm. RACON - 3 Stock items are marked by bold printed order numbers.

35

36 RACON - Short-travel keyswitches NEW RK 90 II, Key cap system for RACON 12 with individual sealing Technical Data General information Thickness of front panel 3.00 mm Light conductor Key grid min x 17.5 mm Degree of protection IP 65 The key cap system RK 90 II has been developed especially fort he short-travel keyswitch RACON 12. The lenses are snapped onto the sealing frame and then set onto the RACON 12 keyswitches. The PCB presses this units against the front panel, so they are sealed. Two versions of the sealing frames are provided with light conductors, either in square ore triangle form. The lenses can be legended directly with laser. For bright letters (see picture) first white lenses are painted in dark, then the letters are cut out of the dark colour with laser. RACON - 36

37 RACON - Short-travel keyswitches RK 90 II - Sealing frame Sealing frame with square light conductor Thickness of front panel Light conductor Order no. without lens with snapped-on lens Note 3.00 mm square /0000 Please order lens separately mm triangular /0000 Please order lens separately mm /0000 Please order lens separately. Technical data see page - 36 Lenses: Lens RK 90 II, white: /0200 Lens RK 90 II, red: /0300 Lens RK 90 II, green: /0500 Lens RK 90 II, blue: /0600 Lens RK 90 II, yellow: /000 Lens RK 90 II, grey: /0700 Lens RK 90 II, iron grey (varnished): /6033 Lens RK 90 II, grey (varnished): /6032 Legended lenses on request. RACON Stock items are marked by bold printed order numbers. - 37

38

39 RF - Short-travel keyswitches General Data RF 15 (15 x 15 mm) and RF 19 (19 x 19 mm) with distinct key click, for use under an overlay or with RK 90 keycaps. Can be fully illuminated. Content RF 15 - Short-travel keyswitch - 2 RF 15 - Short-travel keyswitch, non-illuminated - RF 15 - Short-travel keyswitch, fully illuminated with 2 LED - 5 RF 15 - Short-travel keyswitch, 1 LED spot-illumination - 6 RF 15 N - Short-travel keyswitch - 8 RF 15 N - Short-travel keyswitch, non-illuminated - 51 RF 15 R - Short-travel keyswitch - 52 RF 15 R - Low short-travel keyswitch, non-illuminated - 55 RF 15 R - High short-travel keyswitch, non-illuminated - 55 RF 15 R - Low short-travel keyswitch, 1 LED spot-illumination - 56 RF 15 R - High short-travel keyswitch, 1 LED spot-illumination - 57 RF 15 H - Short-travel keyswitch - 58 RF 15 H - Short-travel keyswitch, non-illuminated - 60 RF 15 H - Short-travel keyswitch, fully illuminated - 61 RF 15 - Signal indicator - 62 RF 15 - Signal indicator, fully illuminated, 1 LED - 6 RF 19 - Short-travel keyswitch - 66 RF 19 - Short-travel keyswitch, non-illuminated - 69 RF 19 - Short-travel keyswitch, fully illuminated with 2 LED - 70 RF 19 - Short-travel keyswitch, 1 LED spot-illumination - 71 RF RF 19 H - Short-travel keyswitch - 72 RF 19 H - Keyswitch, non-illuminated - 7 RF 19 H - Short-travel keyswitch, fully illuminated - 75 RF 19 - Signal indicator - 76 RF 19 - Signal indicator, ½ x 1-module - 78 RF 19 - Signal indicator, ½ x 2-module - 78 RF 19 - Signal indicator, 1 x 1-module - 79 RF 19 - Signal indicator, 1 x 2-module

40 RF - Short-travel keyswitches RF 15/19 - Special accessories - 80 RF 15 N - Extension plunger, round head - 80 RF 15 N - Extension plunger, round head, with recess for LED - 81 RF 15 - Keycap, snap-on, for overall height 12.5 mm - 81 Spacers, round - 82 Spacers, triangular - 83 RF 15 N - LED spacer - 8 RF - 0

41 RF - Short-travel keyswitches Specifications LED 3 mm LED (valid for 25 C) Red LED Green LED Yellow LED Max. forward current l F : Current reduction from: T 0 = 50 C: Wavelength typ: Forward voltage U F /l F typ: Reverse voltage U R /l F typ: Ambient temperature, operating: 30 ma approx 0.5 ma/ C 635 nm 2 V/10 ma 5 V/100 μa min C C Blue LED 30 ma approx 0.5 ma/ C 565 nm 2 V/10 ma 5 V/100 μa min C C White LED 20 ma approx 0.2 ma/ C 586 nm 2 V/10 ma 5 V/100 μa min C C Green LED superbright Max. forward current l F : Current reduction from: T 0 = 50 C: Wavelength typ: Forward voltage U F /l F typ: Reverse voltage U R /l F typ: Ambient temperature, operating: 20 ma approx 0.6 ma/ C 70 nm 2.7 V/10 ma 5V/100 μa min C C 25 ma V/20 ma C C 30 ma nm 3.5 V/20 ma C C 2 mm LED (full illumination of RF 15/19) (valid for 25 C) Red LED Green LED Yellow LED Max. forward current l F : Current reduction from: T 0 = 50 C: Light current f V /l F typ: Wavelength typ: Forward voltage U F /l F typ: Reverse voltage U R /l F typ: Ambient temperature, operating: Max. forward current l F : Current reduction from: T 0 = 50 C: Light current f V /l F typ: Wavelength typ: Forward voltage U F /l F typ: Reverse voltage U R /l F typ: Ambient temperature, operating: 30 ma 0.5 ma/ C nm 1.8 V/20 ma 5 V/100 μa min C C Blue LED 30 ma nm 3.6 V/20 ma - 20 C C 30 ma 0.5 ma/ C nm 2.1 V/10 ma 5 V/100 μa min. - 0 C C Multi-colour LED 30 ma approx 0.6 ma/ C - 635/565 nm 2 V/10 ma C C 50 ma 0.8 ma/ C 250 mim/20 ma 590 nm 1.9 V/20 ma 5 V/100 μa min. -0 C C Calculating the series resistor: Rated power of series: Example for 5 Volt: RF R V = U B - U F I F P V = I F 2 x R V R V = 5V - 2,0 V 0,02 A = 150 Ω (= standard value) - 1

42 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch General Data Low-profile keyboards with RF 15 components should be designed with a mm grid. With this grid, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlays. Technical Data RF General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force max. Switching travel Robustness min mm 15 mm 15 mm 9.7 mm soldering in PCB THT snap-action contact 1 NO 2.9 ±0.6 N mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 2

43 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 15 Circuit Diagram Keyswitch RF 15 Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 Hole Pattern RF 15 Hole Pattern Front Panel RF View on component side, all hole diameters 1,1 +/- 0,1 mm - 3

44 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, non-illuminated Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated transparent /0000 Ag not illuminated transparent /0000 Technical data see page - 2 For keycaps, refer to chapter accessories and system RK 90. If exchangeable legends are required, or if an overall height of 12.5 mm is required, a keycap can be mounted on the non-illuminated keys. The keycap legend is visible through a window in the overlay. You can change the legend by replacing the keycap. RF - Stock items are marked by bold printed order numbers.

45 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, fully illuminated with 2 LED Overall height Illuminated area 10.8 x 10.8 mm Housing Actuator Lens Pict.: red Contact materials Illumination Colour of lens LED colour LED type Order no. Au Au Au Au Au Ag Ag Ag Ag Ag Technical data see page - 2 fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 blue blue 2 mm /0000 red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 blue blue 2 mm /0000 For keycaps, refer to RK 90 system design. Technical data of LED see seperate page at the beginning of this chapter. RF Stock items are marked by bold printed order numbers. - 5

46 RF - Short-travel keyswitches RF 15 - Short-travel keyswitch, 1 LED spot-illumination Contact materials Illumination Colour of lens LED colour LED type Order no. Au Au Au Au Ag Ag Ag Ag spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED opaque white blue 3 mm /0000 opaque white red 3 mm /0000 opaque white green 3 mm /0000 opaque white yellow 3 mm /0000 opaque white blue 3 mm /0000 opaque white red 3 mm /0000 opaque white green 3 mm /0000 opaque white yellow 3 mm /0000 Technical data see page - 2 Double-spot LED illumination available on request Technical data of LED see seperate page at the beginning of this chapter. RF - 6 Stock items are marked by bold printed order numbers.

47

48 RF - Short-travel keyswitches RF 15 N - Short-travel keyswitch General Data The RF 15N keyswitch provides a minimum overall height of 6.2 mm. The overall height can be varied by extension plungers which are inserted into the cross-like notches on the actuator tops. LEDs can only be arranged separately next to the keyswitches up to an overall height of 10 mm (i.e. without plunger or with small plunger). Keyswitches with overall heights of 12 mm or more can be provided with a maximum of 2 LEDs which are inserted into the recesses of the keyswitch housing. LEDs of keyswitches with overall heights of 12.5 mm or more should be placed onto LED spacers in order to obtain satisfactory illumination. Technical Data RF General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force max. Switching travel Robustness min mm 15 mm 15 mm 6.2 mm soldering in PCB THT snap-action contact 1 NO external 3 mm LED possible if height more than 12 mm 2.9 ±0.6 N mm 100 with throughplated PCB N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature max. +50 C (in tube) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 8

49 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 15 N Circuit Diagram Keyswitch RF 15 N Operation characteristic limits RF Keyswitch, non illuminated Keyswitch, spot-illuminated Dimensional Drawings RF 15 N RF - 9

50 RF - Short-travel keyswitches Hole Patterns Front Panel RF 15 N RF 15 N without plunger RF 15 N with plunger ø 10 mm, non-illuminated RF 15 N with plunger ø 10 mm, illuminated RF 15 N with plunger ø 15 mm, illuminated Hole Pattern RF 15 N RF View on component side All hole diameters 1.1 +/- 0.1 mm PCB layout keyswitch 1/00 grid - 50

51 RF - Short-travel keyswitches Typical accessories RF 15 N - Short-travel keyswitch Description Photo Order no. Additional accessories see page RF 15 N - LED spacer Ø 5 mm, spacing length 2.2 mm, / light grey, for use with overall height of 12.5 mm RF 15 N - Extension plunger, Ø 10 mm, overall height 22.5 mm RF 15 N - Extension plunger, Ø 15 mm, overall height 22.5 mm / / RF 15 N - Short-travel keyswitch, non-illuminated Contact materials Illumination Recommended key grid Overall height Order no. Au Ag Technical data see page - 8 external 3 mm LED possible if height more than 12 mm external 3 mm LED possible if height more than 12 mm For keycaps, refer to RK 90 system design. Double-spot LED illumination available on request mm 6.2 mm / mm 6.2 mm /0000 RF Stock items are marked by bold printed order numbers. - 51

52 RF - Short-travel keyswitches RF 15 R - Short-travel keyswitch Pict.: with 2 mm LED, red with 3 mm LED, green General Data The round actuator of the RF 15 R keyswitch requires round front panel cut-outs. These make it possible to use a narrow keyboard grid of only 15.2 mm with sufficiently large frame webs between the individual keys. We recommend area embossing over the actuators for the overlay. Technical Data RF General information Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force max. Switching travel Robustness min mm 15 mm 15 mm soldering in PCB THT snap-action contact 1 NO 2.9 ±0.6 N mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 52

53 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 15 R Circuit Diagram Keyswitch RF 15 R Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, spot-illuminated Dimensional Drawing RF 15 R Hole Pattern RF 15 R RF View on component side All hole diameters 1.1 +/- 0.1 mm PCB layout keyswitch 1/00 grid - 53

54 RF - Short-travel keyswitches Hole Pattern Front Panel RF 15 R RF 15 R, non-illuminated RF 15 R, illuminated RF - 5

55 RF - Short-travel keyswitches RF 15 R - Low short-travel keyswitch, non-illuminated Overall height Contact materials Overall height Illumination LED type LED colour Order no. Au 9.7 mm not illuminated /0000 Ag 9.7 mm not illuminated /0000 Technical data see page - 52 RF 15 R - High short-travel keyswitch, non-illuminated Contact materials Overall height Illumination LED type LED colour Order no. Au 12.5 mm not illuminated /0000 Ag 12.5 mm not illuminated /0000 Technical data see page - 52 RF Stock items are marked by bold printed order numbers. - 55

56 RF - Short-travel keyswitches RF 15 R - Low short-travel keyswitch, 1 LED spot-illumination Pict.: with 2 mm LED, red Contact materials Overall height Illumination LED type LED colour Order no. Au 9.7 mm spot illumination 1 LED Au 9.7 mm spot illumination 1 LED Au 9.7 mm spot illumination 1 LED Ag 9.7 mm spot illumination 1 LED Ag 9.7 mm spot illumination 1 LED Ag 9.7 mm spot illumination 1 LED 2 mm red / mm green / mm yellow / mm red / mm green / mm yellow /0000 Technical data see page - 52 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of this chapter. RF - 56 Stock items are marked by bold printed order numbers.

57 RF - Short-travel keyswitches RF 15 R - High short-travel keyswitch, 1 LED spot-illumination Pict.: with 3 mm LED, green Contact materials Overall height Illumination LED type LED colour Order no. Au 12.5 mm spot illumination 1 LED Au 12.5 mm spot illumination 1 LED Au 12.5 mm spot illumination 1 LED Au 12.5 mm spot illumination 1 LED 3 mm blue / mm red / mm green / mm yellow /0000 Technical data see page - 52 Versions with 2 LEDs available on request. Technical data of LED see seperate page at the beginning of the chapter. RF Stock items are marked by bold printed order numbers. - 57

58 RF - Short-travel keyswitches RF 15 H - Short-travel keyswitch General Data Application notes: The RF 15 H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 20 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data RF General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force max. Switching travel Robustness min. 20 mm 15 mm 15 mm 12.5 mm soldering in PCB THT snap-action contact 1 NO 2.9 ±0.6 N mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 58

59 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 15 H Circuit Diagram Keyswitch RF 15 H Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Dimensional Drawing Hole Pattern Hole Pattern Front Panel RF View on component side. All hole diameters 1,1 +/- 0,1 mm. PCB layout keyswitch 1/00 grid. - 59

60 RF - Short-travel keyswitches Typical accessories RF 15 H - Short-travel keyswitch Description Photo Order no. Additional accessories see page O-ring, black, for blocking the operating stroke / RF 15 H - Short-travel keyswitch, non-illuminated housing actuator lens overall height illuminated area Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated white /0000 Ag not illuminated white /0000 Technical data see page - 58 RF - 60 Stock items are marked by bold printed order numbers.

61 RF - Short-travel keyswitches RF 15 H - Short-travel keyswitch, fully illuminated housing actuator lens overall height illuminated area Pict.: yellow Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED red red 2 mm /0000 Au fully illuminated 2 LED green green 2 mm /0000 Au fully illuminated 1 LED green green super bright 3 mm /0000 Au fully illuminated 2 LED yellow yellow 2 mm /0000 Au fully illuminated 1 LED white white 3 mm /0000 Au fully illuminated 2 LED orange yellow 2 mm /0000 Au fully illuminated 1 LED blue blue 3 mm /0000 Au/Ag fully illuminated 2 LED yellow multi colour 3 mm /0000 Ag fully illuminated 2 LED red red 2 mm /0000 Ag Ag fully illuminated 2 LED fully illuminated 1 LED green green 2 mm /0000 green green super bright 3 mm /0000 Ag fully illuminated 2 LED yellow yellow 2 mm /0000 Ag fully illuminated 1 LED white white 3 mm /0000 Ag fully illuminated 2 LED orange yellow 2 mm /0000 Ag fully illuminated 1 LED blue blue 3 mm /0000 Ag fully illuminated 2 LED white multi colour 3 mm /0000 RF Technical data see page - 58 When using the keyswitches with multicolour LEDs the illumination colour can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colours red, green, yellow as well as all secondary colours from these are possible. Technical data of LED see separate page at the beginning of this chapter. Stock items are marked by bold printed order numbers. - 61

62 RF - Short-travel keyswitches RF 15 - Signal indicator Technical Data General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Illumination LED colour LED type mm 15 mm 15 mm 9.7 mm THT soldering in PCB fully illuminated 1 LED 2 mm Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. RF - 62

63 RF - Short-travel keyswitches Dimensional Drawing Signal Indicator RF 15 Hole Pattern Hole Pattern Front Panel View on component side, all hole diameters 1,1 +/- 0,1 mm RF - 63

64 RF - Short-travel keyswitches RF 15 - Signal indicator, fully illuminated, 1 LED Illuminated area 10.8 x 10.8 mm Housing Lens Pict.: green Overall height Illumination Colour of lens LED colour LED type Order no. 9.7 mm fully illuminated 1 LED 9.7 mm fully illuminated 1 LED 9.7 mm fully illuminated 1 LED 9.7 mm fully illuminated 1 LED 9.7 mm fully illuminated 1 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 blue blue 2 mm /0000 Technical data see page - 62 Technical data of LED see separate page at the beginning of chapter. RF - 6 Stock items are marked by bold printed order numbers.

65

66 RF - Short-travel keyswitches RF 19 - Short-travel keyswitch General Data Application notes: RF 19 keys offer a large actuation area. When designing low-profile keyboards with a grid of >= 23 mm, frame webs remain free between the individual keys. The overlay can be glued onto these frame webs; we recommend area embossing over the keys for the overlay. Technical Data RF General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force max. Switching travel Robustness min. 23 mm mm mm 9.7 mm soldering in PCB THT snap-action contact 1 NO 2.9 ±0.6 N mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 66

67 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 19 Circuit Diagram Keyswitch RF 19 Operation characteristic limits RF Keyswitch, non-illuminated Keyswitch, fully illuminated Keyswitch, spot-illuminated Dimensional Drawing RF - 67

68 RF - Short-travel keyswitches Hole Patterns RF 19 * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Hole Patterns Front Panel RF 19 RF - 68

69 RF - Short-travel keyswitches RF 19 - Short-travel keyswitch, non-illuminated Overall hight Housing Actuator Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated transparent /0000 Ag not illuminated transparent /0000 Technical data see page - 66 RF Stock items are marked by bold printed order numbers. - 69

70 RF - Short-travel keyswitches RF 19 - Short-travel keyswitch, fully illuminated with 2 LED Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED red red 2 mm /0000 Au fully illuminated 2 LED green green 2 mm /0000 Au fully illuminated 2 LED opaque white green 2 mm /0000 Au fully illuminated 2 LED yellow yellow 2 mm /0000 Au fully illuminated 2 LED orange yellow 2 mm /0000 Au fully illuminated 2 LED blue blue 2 mm /0000 Ag fully illuminated 2 LED red red 2 mm /0000 Ag fully illuminated 2 LED green green 2 mm /0000 Ag fully illuminated 2 LED yellow yellow 2 mm /0000 Ag Ag fully illuminated 2 LED fully illuminated 2 LED orange yellow 2 mm /0000 blue blue 2 mm /0000 Ag fully illuminated 2 LED opaque white green 2 mm /0000 Ag fully illuminated 2 LED white green 2 mm /0000 Ag fully illuminated 2 LED white yellow 2 mm /0000 Technical data see page - 66 RF Technical data of LED see separate page at the beginning of this chapter Stock items are marked by bold printed order numbers.

71 RF - Short-travel keyswitches RF 19 - Short-travel keyswitch, 1 LED spot-illumination Contact materials Illumination Colour of lens LED colour LED type Order no. Au Au Au Au Ag Ag Ag Ag spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED spot illumination 1 LED opaque white blue 3 mm /0000 opaque white red 3 mm /0000 opaque white green 3 mm /0000 opaque white yellow 3 mm /0000 opaque white blue 3 mm /0000 opaque white red 3 mm /0000 opaque white green 3 mm /0000 opaque white yellow 3 mm /0000 Technical data see page - 66 Versions with 2 LEDs available on request. Technical data of LED see separate page at the beginning of this chapter. RF Stock items are marked by bold printed order numbers. - 71

72 RF - Short-travel keyswitches RF 19 H - Short-travel keyswitch General Data Application notes: The RF 19H key has an overall height of 12.5 mm and can be fully illuminated. When designing membrane keyboards, we recommend using a key grid of at least 2 mm and a 0.13 mm overlay with area embossing over the keys. You can use the O-ring (accessory) to block the key and use it as an indicator field or blank spaceholder. Technical Data RF General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination LED colour LED type Mechanical characteristics Operating force max. Switching travel Robustness min. 2 mm mm mm 12.5 mm soldering in PCB THT snap-action contact 1 NO 2.9 ±0.6 N mm with through-plated PCB 100 N Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. (ohmic load) Contact resistance when new max. Insulation resistance Au: 0.02 V, Ag: 3 V Au: 35 V, Ag: 50 V Au: 0.01 ma, Ag: 0.1 ma Au: 100 ma, Ag: 250 ma Au: 2 W, Ag: 12.5 W 100 m 10 9 Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 1,000,000 (operations) Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. - 72

73 RF - Short-travel keyswitches Force/Travel Diagram Keyswitch RF 19 H Circuit Diagram Keyswitch RF 19 H Operation characteristic limits RF Keyswitch, non illuminated Keyswitch, fully illuminated Dimensional Drawing RF - 73

74 RF - Short-travel keyswitches Hole Pattern RF 19 H Hole Pattern Front Panel RF 19 H Keyswitch not illuminated The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Typical accessories RF 19 H - Short-travel keyswitch Description Photo Order no. Additional accessories see page O-ring, black, 16.0 x 1, for blocking RF 19H keys / RF 19 H - Keyswitch, non-illuminated RF Contact materials Illumination Colour of lens LED colour LED type Order no. Au not illuminated white /0000 Ag not illuminated white /0000 Technical data see page Stock items are marked by bold printed order numbers.

75 RF - Short-travel keyswitches RF 19 H - Short-travel keyswitch, fully illuminated Contact materials Illumination Colour of lens LED colour LED type Order no. Au fully illuminated 2 LED red red 2 mm /0000 Au fully illuminated 2 LED green green 2 mm /0000 Au fully illuminated 1 LED green green super bright 3 mm /0000 Au fully illuminated 2 LED yellow yellow 2 mm /0000 Au fully illuminated 1 LED white white 3 mm /0000 Au fully illuminated 2 LED orange yellow 2 mm /0000 Au fully illuminated 2 LED white multi colour 3 mm /0000 Au fully illuminated 1 LED blue blue 3 mm /0000 Ag fully illuminated 2 LED red red 2 mm /0000 Ag Ag fully illuminated 2 LED fully illuminated 1 LED green green 2 mm /0000 green green super bright 3 mm /0000 Ag fully illuminated 1 LED blue blue 3 mm /0000 Ag fully illuminated 2 LED yellow yellow 2 mm /0000 Ag fully illuminated 1 LED white white 3 mm /0000 Ag fully illuminated 2 LED orange yellow 2 mm /0000 Ag fully illuminated 2 LED white multi colour 3 mm /0000 RF Technical data see page - 72 When using the keyswitches with multicolour LEDs the illumination colour can be varied from red to green by change of polarity. Due to the frequency of the polarity-changes the colours red, green, yellow as well as all secondary colours from these are possible. Technical data of LED see separate page at the beginning of this chapter. Stock items are marked by bold printed order numbers. - 75

76 RF - Short-travel keyswitches RF 19 - Signal indicator Pict.: 0.5 x 1-module 0,5 x 2-module 1 x 1-module 1 x 2-module Technical Data General information Colour of lens Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Illumination LED colour LED type 23/x mm 9.15 mm THT soldering in PCB Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Solderability / solder heat according to E DIN resistance IEC Wave soldering 260 C max. Manual soldering 350 C / 5 sec. max. RF - 76

77 RF - Short-travel keyswitches Dimensional Drawing Signal Indicator RF 19 Hole Pattern RF 19 RF * The LED may be positioned either on the left-hand or right-hand side. Standard version: LED on left-hand side View on component side, all hole diameters 1.1 +/- 0.1 mm Front panel cut-out = outer keyswitch size + 1 mm - 77

78 RF - Short-travel keyswitches RF 19 - Signal indicator, ½ x 1-module Housing Lens Illuminated area 16. x 7.8 mm Pict.: 0.5 x 1-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED fully illuminated 1 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 Technical data see page - 76 Technical data of LED see separate page at the beginning of chapter. RF 19 - Signal indicator, ½ x 2-module Pict.: 0,5 x 2-module Illumination Colour of lens LED colour LED type Order no. RF fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED fully illuminated 3 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 Technical data see page - 76 Technical data of LED see separate page at the beginning of chapter Stock items are marked by bold printed order numbers.

79 RF - Short-travel keyswitches RF 19 - Signal indicator, 1 x 1-module Pict.: 1 x 1-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED fully illuminated 2 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 blue blue 2 mm /0000 Technical data see page - 76 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches Suitable for RK 90 system design, illuminated for 2-module keycap. RF 19 - Signal indicator, 1 x 2-module Pict.: 1 x 2-module Illumination Colour of lens LED colour LED type Order no. fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED fully illuminated 5 LED red red 2 mm /0000 green green 2 mm /0000 yellow yellow 2 mm /0000 orange yellow 2 mm /0000 RF Technical data see page - 76 For technical data of the LED see separate page at the beginning of chapter RF short-travel keyswitches Stock items are marked by bold printed order numbers. - 79

80 RF - Short-travel keyswitches RF 15/19 - Special accessories Pict.: opaque light grey round and triangular versions Technical Data Dimensions Length Width Overall height Diameter Colour RF 15 N - Extension plunger, round head Pict.: opaque light grey Length Width Overall height Diameter Colour Order no mm 10 mm / mm 10 mm / mm 10 mm / mm 10 mm / mm 10 mm /0710 RF Length of plunger = Overall height -.25 mm Stock items are marked by bold printed order numbers.

81 RF - Short-travel keyswitches RF 15 N - Extension plunger, round head, with recess for LED Length Width Overall height Diameter Colour Order no mm 15 mm / mm 15 mm / mm 15 mm / mm 15 mm / mm 15 mm /0710 Technical data see page - 80 Length of plunger = Overall height -.25 mm. RF 15 - Keycap, snap-on, for overall height 12.5 mm Length Width Overall height Diameter Colour Order no. 1.2 mm 1.2 mm 12.5 mm - beige /0227 Technical data see page - 80 RF Stock items are marked by bold printed order numbers. - 81

82 RF - Short-travel keyswitches Spacers, round Overlay Front panel Spacer PCB Length Width Overall height Diameter Colour Order no mm blue transparent /0000 mm green / mm blue / mm red / mm blue transparent / mm black / mm yellow orange /0000 transparent 5.50 mm yellow / mm green / mm blue / mm blue / mm red / mm blue transparent / mm black / mm yellow orange /0000 transparent 7.25 mm yellow / mm green /0000 RF 7.75 mm blue / mm red / mm blue transparent / mm black /010 Technical data see page - 80 Required spacer length = Overall height of key - front panel thickness mm (area embossing) Stock items are marked by bold printed order numbers.

83 RF - Short-travel keyswitches Spacers, triangular Countersink from height > mm Overlay Front panel Spacer PCB Length Width Overall height Diameter Colour Order no mm blue / mm red / mm blue transparent / mm black / mm yellow orange /0000 transparent 3.75 mm yellow /0000 mm green / mm blue / mm red / mm blue transparent / mm black / mm yellow orange /0000 transparent 5.50 mm yellow / mm green / mm blue / mm blue / mm red / mm blue transparent /0000 RF 6.75 mm black / mm yellow orange /0000 transparent 7.25 mm yellow / mm green / mm blue /0000 Stock items are marked by bold printed order numbers. - 83

84 RF - Short-travel keyswitches Length Width Overall height Diameter Colour Order no. 8 mm red / mm blue transparent / mm blue / mm black / mm yellow orange /0000 transparent Technical data see page - 80 Required spacer length = Overall height of key - front panel thickness mm (area embossing). RF 15 N - LED spacer Pict.: opaque light grey Length Width Overall height Diameter Colour Order no. 2.2 mm mm 5 mm light grey / mm mm 5 mm black /0105 Technical data see page - 80 RF - 8 Stock items are marked by bold printed order numbers.

85 KN 19 - Short-travel main switch General Data Short-travel main switch for use in membrane keyboards under the overlay or with RK 90 keycaps, 250V, A max. A cut-out in the overlay is not required! Content KN 19 - Short-travel main switch - 86 KN 19 - Short-travel main switch - 88 KN 19-85

86 KN 19 - Short-travel main switch KN 19 - Short-travel main switch Pict.: 1 NC + 1 NO 2 NC / 2 NO General Data The KN 19 makes it possible to implement a power switch directly in a low-profile data entry system. This eliminates the need for extra switches on the device and additional openings in the overlay. In this way, you can achieve an optimum of safety and a consistent design. The contact opening widths comply with the VDE standards. The KN 19 can also be employed underneath RK 90 keycaps. Other actuation functions (momentary, latching/momentary) available on request. Technical Data KN 19 General information Recommended key grid Dimensions Length Width Overall height Mechanical design Mounting Terminals Contact system Contact arrangement Contact materials Illumination x 38.1 mm 37.8 mm 18.8 mm 9.7 mm Degree of protection Hot wire ignition acc. to 850 C IEC Mechanical characteristics Operating force max. Operating travel Robustness max. on PCB THT solder terminals snap-action bridge contact Ag 1 LED (max. 3 mm) possible IP0 9 ±3 N 0.55 ±0.15 mm 100 N Electrical characteristics Rated voltage AC min. Rated voltage DC min. Rated voltage AC max. Rated voltage DC max. Ohmic load AC Ohmic load DC min. Ohmic load DC max. Contact resistance when new max. Capacity input current AC max. Rated motor current AC Rated filament lamp current AC Bouncing time max. 12 V 12 V 250 V 50 V 6 A 0.1 A 10 A 50 m 100 A A 2. A 10 ms Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life AC AC 250 V: / 2A; /6A Operating life DC 50,000(10 A / 50 V=) Soldering time max. 3 s Soldering temperature max. 350 C Flame class acc. to UL 9 UL 9 VO - 86

87 KN 19 - Short-travel main switch Circuit Diagram 1 NC + 1 NO 2 NC/2 NO Dimensional Drawing Hole Pattern Definition "ON" "OFF" only valid for 2-pole version. Locating hole only version 2 NO/2 NC Approvals View on component side. IEC UL 508,C22.2 No. 1-M91 KN 19-87

88 KN 19 - Short-travel main switch Approvals IEC UL 508,C22.2 No. 1-M91 Typical accessories KN 19 - Short-travel main switch Description Photo Order no. Additional accessories see page KN19 - Absorption rubber /0000 KN 19 - Short-travel main switch Pict.: 1 NC + 1 NO Contact arrangement Rated voltage AC max. Order no. 1 NC + 1 NO 250 V / NC / 2 NO 250 V /0000 Technical data see page - 86 Accessoires: KN19 - Absorption rubber: /0000 For keycaps, refer to RK 90 system design. Positive opening NC contacts to IEC LED spot-illumination (max. 3 mm) possible. KN Stock items are marked by bold printed order numbers.

89 RK 90 - Keycaps General Data Keycaps for RACON, RF 15 / RF 19 and KN 19 short-travel keyswitches Content RK 90 - Keycaps, plastic, 9 x 9 mm - 92 RK 90 - Keycaps, plastic, 1 mm - 9 RK 90 - Keycaps, aluminum, 1 x 1 mm - 98 RK 90 - Special accessories RK 90-89

90 RK 90 - Keycaps Keycap system RK 90 Example with RF 15 keyswitches. Instead of RF 15 following keyswitches can be used: - MICON 5 - RACON 8/12 - RF 15 keyswitches and signal indicators - RF 19 keyswitches and signal indicators - Short-travel main switch KN 19 The RK 90 system was granted the prize of the Design Forum of the Hannover Fair. Degree of protection: IP65 according to DIN in front of the panel, with silicone sealing. Installation methods Mounting from front Sealing foil between RK 90 keyboard and customer s front panel. Mounting from rear Sealing foil is screwed to RK 90 panel with fixing rails; sealing between keyboard and customer s front panel has to be provided. RK 90 Legending Laser printing: This labelling method is possible for opaque keycaps. The symbols are engraved in the keycaps with laser. When using transparent lenses, the pressure pad can be legended by printing. As the legending is protected by the lens, it is frictionproof. Engraving: With this method the keycaps are engraved with the required symbol and then inlaid with ink. - 90

91 RK 90 - Keycaps Recommendations Front panel thickness: - Aluminum: 2 mm (1.5 mm min, 3 mm max.) (Fixing with M 3 pressed-in studs) - Steel: 2 mm (3 mm max.): V2A: 1.25 mm (Fixing with M 3 welded-on studs) The keytop surface is flush with the keyboard at a panel thickness of 3.5 mm. Silicone sealing: Material: Silicone transparent Type: A-SY 0-79 Hardness: 30 shore +/- 5 Thickness: 0.5 +/ mm Installation: Ensure that the keyboard slopes slightly so that any liquid can drain away between front panel and silicone sealing; if necessary, provide additional drain holes in the front panel. Cleaning liquids For the cleaning of the plastic keycaps please do not use cleaning liquids based on alcohol or acid. RK 90-91

92 RK 90 - Keycaps RK 90 - Keycaps, plastic, 9 x 9 mm Steel stud welded-on with steel version pressed-in with aluminum version Keycap Sealing Front panel Housing General Data Please note: Technical Data General information Dimensions RK 90

93 RK 90 - Keycaps RK 90 - Keycap body plastic, for lenses 9 x 9 mm Final size Punched size Size Illuminability Dimension keycap behind front panel Dimension keycap in front of front panel Dimension (c) hole patterns final size yes Order no. without lens Note Lenses: RK 90 Stock items bold printed order numbers.

94 RK 90 - Keycaps RK 90 - Keycaps, plastic, 1 mm General Data Please note: Technical Data General information yes Dimensions RK 90-9

95 RK 90 - Keycaps RK 90 - Keycap body plastic, for lenses 1 mm, 1-module Final size Punched size Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note yes Lenses: RK 90 - Keycap body plastic, for lenses 1¼-module Final size Punched size Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note yes Lenses: RK 90 Stock items bold printed order numbers.

96 RK 90 - Keycaps RK 90 - Keycap body plastic, for lenses 1 mm, 1½-module Final size Punched size Size Illuminability Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note yes Lenses: RK 90 - Keycap body plastic, for lenses 2-module Size Illuminability Dimension (a) behind front panel Final size Punched size Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. without lens Note yes RK 90 Lenses: Stock items bold printed order numbers.

97

98 RK 90 - Keycaps RK 90 - Keycaps, aluminum, 1 x 1 mm General Data The RK 90 system design with metal keycaps is fairly safe against mechanical, thermal or chemical effects. Combined with a metal front panel, this data entry system offers maximum protection against vandalism. Tried and tested MICON 5, RACON 8/12 or RF 15/19 PCB keyswitches are used underneath the metal keycaps. The keycaps can be provided with engraved, coloured anodized or laser-printed legends. This means that the legend is durable and cannot be removed by mechanical or chemical means. Technical Data General information Colour of lens Size Degree of protection (with silicon seal) aluminum colourless anodized IP65 Dimensions Dimension (b) in front of front panel Dimension (a) behind front panel Dimension (c) hole patterns final size Dimension hole patterns punched size RK 90 - Keycaps, aluminum, 1 mm, 1-module a b c RK 90 Size Colour of lens Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. 1-module aluminum colourless anodized x mm x mm 1.00 x 1.00 mm / Stock items are marked by bold printed order numbers.

99 RK 90 - Keycaps RK 90 - Keycaps, aluminum, 1 mm, 1½-module a b c Size Colour of lens Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. - RK 90 - Keycaps, aluminum, 1 mm, 2-module a b c Size Colour of lens Dimension (a) behind front panel Dimension (b) in front of front panel Dimension (c) hole patterns final size Order no. - RK 90 Stock items bold printed order numbers. - 99

100 RK 90 - Keycaps RK 90 - Special accessories Technical Data General information Dimensions RK 90 - Fin, to avoid inadvertent operation Mounting holes Short text Feature 1 Feature 2 Order no /0152 RK 90 Stock items bold printed order numbers.

101 RK 90 - Keycaps RK 90 - Spacer M Short text Feature 1 Feature 2 Order no RK 90 - Silicone foil 600 x 590 x 0.5 mm Short text Feature 1 Feature 2 Order no. RK 90 Stock items bold printed order numbers.

102

103 RG 85 III - Short-travel system General Data Vandal-proof input system, ideally suited for elevator controls, info terminals, vending machines, etc. Content RG 85 III - Keyswitch RG 85 III - Keylock switch RG 85 III - Signal indicator, without lens - 11 RG 85 III - Accessories RG 85 III - 103

104 RG 85 III - Short-travel system System Features Perfectly suited for: elevator controls, info terminals, vending machines, etc. Vandal proof construction Modular fixing system with quick fasteners or single fixing method using thread studs Connection with keyed 8-pin micro-match connector Degree of protection: IP0/65 Keylock Switch Features Round or square design and lens shape Edge illumination in one or two colours with LED for each colour Lens material: Aluminum or stainless steel with plastic inlays Contact arrangement: 1 NO Cylinder lock with pin tumblers Two switching positions: 0 and 90 degrees, key can be removed in any position Lock type 5201 other lock types on request Included: 2 keys Micro-Match Connector Pin Assignment 1/3 NO contact 2 O V LED Edge illuminat./signal indicator 1 st colour + 2 V DC +/- 20% 5 Symbol illumination + 2 V DC +/- 20% 6 Edge illuminat./signal indicator 2 nd colour + 2 V DC +/- 20% 7/8 NC contact Pushbutton Features Round or square design and lens shape Edge illumination in one or two colours with LED for each colour Pushbutton with 1 NO contact: Additional illumination of the symbol with 2 LED possible Lens material: Aluminum or stainless steel with plastic inlays Switching element: short-travel keyswitch RF 19-1 NO contact, non-illuminated - 1 NO contact, fully illuminated - 1 NC contact and 1 NO contact, non-illuminated Signal Indicator Features Lens shape round, square or triangular (arrow shape) Lens material: Translucent plastic material Fully illuminated with 5 LED RG 85 III - 10

105 RG 85 III - Short-travel system Installation plan Rail fixing method Single fixing method Fixing rail ± 0.10 (27.50) Grid (27.50) Distance threaded studs ± 0.10 Distance threaded studs ± ± ± 0.10 Grid Distance threaded studs ± 0.10 Grid Distance threaded studs ± ± 0.10 Grid Threaded studs M (min.) 1 mm Threaded studs M x (min.) 20 mm Spacer Fixing element Front panel RG 85 III - 105

106 RG 85 III - Short-travel system RG 85 III - Keyswitch Technical Data Dimensions Mechanical design Mechanical characteristics Electrical characteristics Other specifications 3 Typical accessories RG 85 III - Keyswitch Description Photo Order no. Additional accessories see page RG 85 III Stock items bold printed order numbers.

107 RG 85 III - Short-travel system RG 85 III - Keyswitch, round design, without lens Contact arrangement Edge illumination Symbol illumination Version Order no RG 85 III Stock items bold printed order numbers.

108 RG 85 III - Short-travel system RG 85 III - Keyswitch, square design, without lens Contact arrangement Edge illumination Symbol illumination Version Order no RG 85 III Stock items bold printed order numbers.

109

110 RG 85 III - Short-travel system RG 85 III - Keylock switch Technical Data Dimensions Mounting grid min. Length Width Mounting depth 55 x 35 mm 6 mm 3 mm (35 mm with sealing) Mechanical design Version Mounting on U-rails or single mounting Terminals 8-pin Micro-Match female connector Contact system cross contact Contact arrangement 1 NO Contact materials Au alloy Symbol illumination none Edge illumination Lock cylinder lock, lock type 5201 Key removal position Pos Mechanical characteristics Rotating angle 1 x 90 Switching travel NO 1 mm Switching travel NC Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max. Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Bouncing time max. Operating voltage for LED Input current LED 3 V 35 V 0.1 ma 100 ma 1 W 100 m 3 10 ms 2 ±20% V per colour/led row 9-16 ma Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. 50,000 (operations) Degree of protection rail IP0 mounting Degree of protection single IP65 mounting Flammability of materials according to UL 9 HB Typical accessories RG 85 III - Keylock switch Description Photo Order no. Additional accessories see page RG 85 III - Lenses for keylock switches, round, / stainless steel RG 85 III - Lenses for keylock switches, square, aluminum / RG 85 III Stock items are marked by bold printed order numbers.

111 RG 85 III - Short-travel system RG 85 III - Keylock switch, round design, without lens Contact arrangement Edge illumination Rotating angle Version Order no. 1 NO LED white 1 x 90 round / NO LED red 1 x 90 round / NO LED yellow 1 x 90 round /000 1 NO LED green 1 x 90 round / NO LED blue 1 x 90 round / NO LED white, LED blue 1 x 90 round / NO LED green, LED red 1 x 90 round /8000 Technical data see page Accessoires: RG 85 III - Lenses for keylock switches, round, stainless steel: /2000 Please order lenses (round shape) separately. RG 85 III Stock items are marked by bold printed order numbers

112 RG 85 III - Short-travel system RG 85 III - Keylock switch, square design, without lens Contact arrangement Edge illumination Rotating angle Version Order no. 1 NO LED white 1 x 90 square / NO LED red 1 x 90 square / NO LED yellow 1 x 90 square /000 1 NO LED green 1 x 90 square / NO LED blue 1 x 90 square / NO LED white, LED blue 1 x 90 square / NO LED green, LED red 1 x 90 square /8000 Technical data see page Accessoires: RG 85 III - Lenses for keylock switches, square, stainless steel: /2000 Please order lenses (square shape) separately. RG 85 III Stock items are marked by bold printed order numbers.

113

114 RG 85 III - Short-travel system RG 85 III - Signal indicator, without lens Technical Data Dimensions Mechanical design Other specifications Electrical characteristics Typical accessories RG 85 III - Signal indicator, without lens Description Photo Order no. Additional accessories see page /0000 RG 85 III - 11 Stock items bold printed order numbers.

115 RG 85 III - Short-travel system RG 85 III - Signal indicator, without lens Illumination Order no. RG 85 III Stock items bold printed order numbers.

116 RG 85 III - Short-travel system RG 85 III - Accessories RG 85 III - Lenses for keyswitches, round Version Form of lens Legending colour Legending Order no. - - RG 85 III Stock items bold printed order numbers.

117 RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. K K RG 85 III Stock items bold printed order numbers.

118 RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. K K RG 85 III - Lenses for keyswitches, square Version Form of lens Legending colour Legending Order no. - - RG 85 III Stock items bold printed order numbers.

119 RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. 3 K K RG 85 III Stock items bold printed order numbers.

120 RG 85 III - Short-travel system Version Form of lens Legending colour Legending Order no. 3 K K RG 85 III Stock items bold printed order numbers.

121 RG 85 III - Short-travel system RG 85 III - Lenses for keylock switches, round Version Form of lens Legending colour Legending Order no / RG 85 III - Lenses for keylock switches, square Version Form of lens Legending colour Legending Order no RG 85 III - Lens, round, for signal indicators Version Form of lens Legending colour Legending Order no. - - RG 85 III Stock items bold printed order numbers.

122 RG 85 III - Short-travel system RG 85 III - Lens, square, for signal indicators Version Form of lens Legending colour Legending Order no. - - RG 85 III - Lens, triangular, for signal indicators Version Form of lens Legending colour Legending Order no /0000 Cable, 8 wires, with socket connectors on both ends Version Form of lens Legending colour Legending Order no RG 85 III Stock items bold printed order numbers.

123 RG 85 III - Short-travel system Fixing rail, length 90 mm Version Form of lens Legending colour Legending Order no Spacer Version Form of lens Legending colour Legending Order no Fixing piece for mounting the elements with the rail fixing method Version Form of lens Legending colour Legending Order no RG 85 III Stock items bold printed order numbers.

124

125 RS 76 - Full-travel keyswitches General Data The RS 76 full-travel keyswitches are designed for configuring keyboards. They offer very comfortable operation with an overall height of 15.5 / 15.9 mm and a key travel of mm. The modular system with a grid of 3/ = mm enables you to design any key block you may want. Mechanical contact system RS 76 M A gold alloy is used as the contact material and provides high contact reliability, low contact resistance and short bouncing time. Solid-state contact system RS 76 C The solid-state switch in Hall-IC technology ensures bounce-free and wear-free switching and a long operating life. Function: When pressing the keys, a permanent magnet changes its position relative to the Hall-IC and thereby generates an output signal. Their use is especially recommended in hostile environments and for heavy duty applications. Content RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, not illuminable RS 76 M - Full-travel keyswitch, with diode, not illuminable RS 76 M - Full-travel keyswitch, illuminable - 13 RS 76 M - Full-travel keyswitch, illuminable, momentary RS 76 M - Full-travel keyswitch, illuminable, latching RS 76 MX - Full-travel keyswitch, fully illuminable RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, not illuminable RS 76 C - Full-travel keyswitch, illuminable - 10 RS 76 C - Full-travel keyswitch, illuminable, momentary - 11 RS 76 C - Full-travel keyswitch, illuminable, latching - 11 RS 76 - Keycaps, not illuminable - 12 RS 76 - Keycap, opaque - 12 RS 76 - Keycap, opaque, with nail protection - 12 RS 76 - Keycap with legend insert - 13 RS 76 - Keycaps, illuminable - 1 RS 76 - Keycap with light bar - 1 RS 76 - Keycap, illuminable, with legend insert - 1 RS 76 - Keycap, illuminable, with nail protection and legend insert - 15 RS 76 - Keycap, illuminable, with legend insert - 15 RS 76 MX - Keycap, fully illuminable - 16 RS 76 - Keycaps, with legend, two-shot moulded/keycap sets - 18 RS 76 - Keycap set, symbols A-Z - 18 RS 76 - Keycap set, symbols RS 76 - Accessories RS 76 - Cover IP0-151 RS

126 RS 76 - Full-travel keyswitches The RAFI full-travel keyswitches RS 76 are modular systems for designing individual key blocks and keyboards in the 3/ inch (= mm) grid. Definitions Momentary keyswitches Momentary keyswitches return to their initial position after being pressed (momentary action). Latching keyswitches Latching keyswitches lock when actuated and are returned to their initial position when pressed again (push-push action). Keycap, n-module A 2-module keycap f. ex. has the twofold length of a 1-module keycap. Contact principle There are two contact principles: Mechanical (M): Cross contact (RS 76 M) Bridge contact (RS 76 M, illuminated) Contactless (C): Based on Hall-IC (RS 76 C) Manual Soldering The soldering temperature should not exceed 300 C and the soldering time should be less than 5 seconds. Keycap materials Keycap without legend insert: ABS Keycap with legend insert: Keycap body: ABS Lens: PC Legending of keycaps Keycaps can be legended by different methods: Two-shot moulding Using this method the symbol is separately manufactured from a plastic and then the appropriate keycap form is moulded round it. Advantage: The character becomes a integrated part of the keycap, thus eliminating abrasion. All RAFI keycap sets with standard legending are manufatured by this method. Customer specific two-shot moulded keycaps on request. Printing Keycaps can be printed with a two-component ink on request. The abrasin of this kind of legending is high. This method of legending is suitable for average volumes. Engraving In this labour intensive process the keycaps are engraved with the required symbol, then inlaid with ink. Only used for small volumes. Laser-printing This method of legending can be recommended when complete keyboards are required in different keyboard layouts for which RAFI will develop the respective software. The keyboards can then be legended within a short time. This method of legending ist particularly recommended for average to large volumes. Legend inserts In the case of keycaps with replaceable legend inserts it is possible to print or engrave the legend inserts. As these insets are protected by the lens, there can be no abrasion here either. RS

127 RS 76 - Full-travel keyswitches Design No. Description 1.1 Keyswitch RS 76 C 1.2 Keyswitch RS 76 C with LED 1.3 Keyswitch RS 76 M 1. Keyswitch R 76 M with LED 2 Keycap, 1- resp. multi-module 3 Keycap with nail protection, 1- resp. multi-module 5 Keycap, illuminated 6 Keycap, illuminated 7 Keycap, illuminated 9.1 LED 9.2 Spacer for LED (for RS 76 C only) 10.1 Plunger for mult-moduel keycaps* 10.2 Sleeve for multi-moduel keycaps* 10.3 Metal lever for multi-module keycaps* 10. Bearing bracket for multi-module keycaps* 11 Covers * These parts are included as a complete packet in the delivery of keycaps 2-module. RS

128 RS 76 - Full-travel keyswitches Hole Pattern PCB RS 76 M/RS 76 C The hole patterns apply to the horizontal position of the keycaps only. Should they be in a vertical position, the momentary keyswitch must be mounted accordingly, i. e. rotated by 90. For /-module keycaps (view on component side) Momentary keyswitch, non-illuminated Momentary keyswitch, illuminated RS 76 M RS 76 C For 2-, 3- and 8-module keycaps (view on component side) RS 76 M/C Hole diam. 2 Nor through-plating No through-plating Metal bow touches the surface of PCB, in this area no conductor tracks on component side RS 76 Keycap 2-module L 1 mm 25,0 3-module 30,8 5-module 68,58 L 2 mm 22,86 2,13 68,58 Important note: In the case of 2-, 3- and 8-module keycaps, additional holes must be provided for the accessories. In the case of keycaps < 2-module, neither accessories nor holes are required

129 RS 76 - Full-travel keyswitches Specific Technical Data RS 76 C Output pulse diagram Dynamic characteristics (max.) Tw = 25 C Tw = 50 C Tw = 70 C Turn-on delay time t PHL 3 μs 7 μs 10 μs Turn-off delay time t PHL μs 5 μs 6 μs Fall/rise time t PHL 2 μs 2,5 μs 3 μs t PHL 1 μs 1,5 μs 2,5 μs Block diagram Hall IC Static with Enable Input RS

130 RS 76 - Full-travel keyswitches Examples for Application RS 76 C Driving of logic components Indication of logical states Driving of a PNP transistor Use as static key with open collector output. Output transistor (NPN) is conductive when actuated. RS 76 Use in keyboards - 130

131

132 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force max. Operating travel Switching travel Robustness min mm momentary soldering solder terminals, tin-plated cross contact 1 NO Au alloy no mm mm 100 N Electrical characteristics Rated voltage min. 2 V (with Diode 3 V) Rated voltage max. 35 V Rated current min ma Rated current max. 100 ma Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. 1 W 100 m (without diode) 3 (without diode) kv 5 ms Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C (product) Storage temperature max. +50 C (rail) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min (operations) Degree of protection IP0 Flammability of materials UL 9 HB Typical accessories RS 76 M - Full-travel keyswitch, not illuminable Description Photo Order no. Additional accessories see page RS 76 C - Keycap with legend insert / RS 76 C - Keycap, opaque, with nail protection / RS 76 C - Keycap, opaque / RS Stock items are marked by bold printed order numbers.

133 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, not illuminable Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Bestell-Nr. momentary no 1 NO Au alloy mm 0.9 N /0000 momentary no 1 NO Au alloy mm 1. N /0000 Technical data see page For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 M - Full-travel keyswitch, with diode, not illuminable Contact function Illumination Contact arrangement Contact materials Operating travel Operating force max. Bestell-Nr. momentary no 1 NO Au alloy mm 0.9 N /0000 momentary no 1 NO Au alloy mm 1. N /0000 Technical data see page For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 Stock items are marked by bold printed order numbers

134 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, illuminable Pict.: RS 76M, for spot illumination RS 76MX, for full illumination RS 76MX, keyboard fully illuminated Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Contact system Contact arrangement Contact materials Illumination Mechanical characteristics Operating force max. Operating travel Switching travel Robustness min. Electrical characteristics Rated voltage min. Rated voltage max. Rated current min. Rated current max mm soldering solder terminals, tin-plated bridge contact 1 NO Au alloy 1 N mm mm 100 N 2 V 35 V 0.01 ma 100 ma Rated power max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. Bouncing time max. 1 W 200 m kv 10 ms Other specifications Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C (product) Storage temperature max. +50 C (rail) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min momentary, 10 5 (operations) latching Degree of protection IP0 Flammability of materials UL 9 HB Typical accessories RS 76 M - Full-travel keyswitch, illuminable Description Photo Order no. Additional accessories see page RS 76 - Cover IP0, 1-module, charcoal grey / RS 76 C - Keycap, illuminated, with legend insert / RS 76 C - Keycap, illuminated, with nail protection and legend insert / RS 76 C - Keycap with light bar /022-1 RS Stock items are marked by bold printed order numbers.

135 RS 76 - Full-travel keyswitches RS 76 M - Full-travel keyswitch, illuminable, momentary Pict.: RS 76M, for spot illumination Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact spot illumination possible with 3 LED mm /0000 Technical data see page - 13 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. RS 76 M - Full-travel keyswitch, illuminable, latching Contact function Contact system Illumination Recommended key grid Order no. latching bridge contact spot illumination possible with 3 LED Technical data see page - 13 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS mm /0000 RS 76 Stock items are marked by bold printed order numbers

136 RS 76 - Full-travel keyswitches RS 76 MX - Full-travel keyswitch, fully illuminable Pict.: RS 76MX, for full illumination Contact function Contact system Illumination Recommended key grid Order no. momentary bridge contact 2 SMT LED needed mm /0000 Technical data see page - 13 Accessoires: RS 76 MX - Keycap, fully illuminated: /0209 RS 76 MX - Keycap, fully illuminated: /075 For accessories, refer to RS 76 special accessories. For keycaps, see keycaps for RS 76. The SMT LEDs are soldered on the back of the printed circuit board and shine through openings in the board and keyswitch housing. RS Stock items are marked by bold printed order numbers.

137

138 RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, not illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Contact system Illumination mm momentary soldering solder terminals, tin-plated contactless with Hall-IC no Output saturation voltage (Q) max. bei 16 ma ESD strength max. Output switching times (Q) at 25 C, tphl Output switching times (Q) at 25 C, tplh Output switching times (Q) at 25 C, tthl Output switching times (Q) at 25 C, ttlh 0. V 8 kv 3 μs μs 1 μs 2 μs Mechanical characteristics Switching travel off Operating force max. Operating travel Switching travel on Robustness min. Electrical characteristics Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.V Output load current (Q) max. Output residual current (Q) max mm mm mm 100 N V 0.5 ma 5 ma 0. V 5.25 V 16 ma 10 μa Other specifications Reliability of Hall-IC at 25 C λ = 2.5 x 10-7 h -1 Ambient temp. operating min. 0 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C (product) Storage temperature max. (rail) +50 C Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. (operations) Degree of protection IP0 Flammability of materials UL 9 HB Typical accessories RS 76 C - Full-travel keyswitch, not illuminable Description Photo Order no. Additional accessories see page RS 76 C - Keycap with legend insert / RS 76 C - Keycap, opaque, with nail protection / RS 76 C - Keycap, opaque / RS Stock items are marked by bold printed order numbers.

139 RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, not illuminable Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. momentary 10 8 no 0.7 N mm /0000 momentary 10 8 no 1 N mm /0000 Technical data see page For accessories and keycaps, refer to RS 76. For applications, refer to the general description of RS 76. RS 76 Stock items are marked by bold printed order numbers

140 RS 76 - Full-travel keyswitches RS 76 C - Full-travel keyswitch, illuminable Technical Data General information Recommended key grid Mechanical design Contact function Mounting Terminals Contact system Illumination LED colour mm soldering solder terminals, tin-plated contactless with Hall-IC with LED Output residual current (Q) max. Output saturation voltage (Q) max. bei 16 ma ESD strength max. Output switching times (Q) at 25 C, tphl Output switching times (Q) at 25 C, tplh Output switching times (Q) at 25 C, tthl Output switching times (Q) at 25 C, ttlh 10 μa 0. V 8 kv 3 μs μs 1 μs 2 μs Mechanical characteristics Switching travel on Switching travel off Operating force max. Operating travel Robustness min. Electrical characteristics Number of LED Operating voltage DC Supply current max. at UIL = 0 V Supply current max. at UIH = 5 V Input voltage (F) at UIL = 0 V Input voltage (F) at UIH = 2.V Output load current (Q) max mm mm 0.7 N mm 100 N V 0.5 ma 5 ma 0. V 5.25 V 16 ma Other specifications Reliability of Hall-IC at 25 C λ = 2.5 x 10-7 h -1 Ambient temp. operating min. 0 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C (product) Storage temperature max. +50 C (rail) Environmental restistance acc. to IEC , -30, -33 and -78 Operating life min. (operations) Degree of protection IP0 Flammability of materials UL 9 HB Typical accessories RS 76 C - Full-travel keyswitch, illuminable Description Photo Order no. Additional accessories see page RS 76 - Cover IP0, 1-module, light grey / RS 76 C - Keycap, illuminated, with legend insert / RS 76 RS 76 C - Keycap, illuminated, with nail protection and legend insert / Stock items are marked by bold printed order numbers.

141 RS 76 - Full-travel keyswitches Typical accessories RS 76 C - Full-travel keyswitch, illuminable Description Photo Order no. Additional accessories see page RS 76 C - Keycap with light bar /022-1 RS 76 C - Full-travel keyswitch, illuminable, momentary Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. momentary 10 8 with LED 0.7 N mm /0000 Technical data see page - 10 RS 76 C - Full-travel keyswitch, illuminable, latching Contact function Operating life min. (operations) Illumination Operating force max. Operating travel Order no. latching 10 5 with LED 0.7 N mm /0000 Technical data see page - 10 RS 76 Stock items are marked by bold printed order numbers. - 11

142 RS 76 - Full-travel keyswitches RS 76 - Keycaps, not illuminable Pict.: light grey opaque with nail protection charcoal grey / white transparent colourless RS 76 - Keycap, opaque Pict.: charcoal grey light grey Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/ / module no light grey/ /022 Keycap sets available in two-shot moulded design. Other keycap sizes, e.g , 1.5-, 1.75-, 2-, 3-, 5- and 8-module versions available on request. RS 76 - Keycap, opaque, with nail protection Pict.: light grey Size of keycap opaque with nail protection charcoal grey / white Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/ / module no light grey/ /022 Keycap sets available in two-shot moulded design. RS 76 Other keycap sizes, e.g , 1.5-, 1.75-, 2-, 3- and 8-module versions available on request Stock items are marked by bold printed order numbers.

143 RS 76 - Full-travel keyswitches RS 76 - Keycap with legend insert Pict.: transparent colourless Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module no charcoal grey/- colourless/white / module no light grey/- colourless/white /5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colours on request. RS 76 Stock items are marked by bold printed order numbers. - 13

144 RS 76 - Full-travel keyswitches RS 76 - Keycaps, illuminable RS 76 - Keycap with light bar Pict.: light grey Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes light grey/ /022 1-module yes charcoal grey/ /0152 Other colours on request. RS 76 - Keycap, illuminable, with legend insert Pict.: charcoal grey Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white / module yes light grey/- colourless/white /5520 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colours on request. RS 76-1 Stock items are marked by bold printed order numbers.

145 RS 76 - Full-travel keyswitches RS 76 - Keycap, illuminable, with nail protection and legend insert Pict.: light grey, yellow lens Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white / module yes light grey/- colourless/white /5520 Supplied as single parts: Mat lens, legend insert, keycap body. Other colours on request. RS 76 - Keycap, illuminable, with legend insert Pict.: light grey, red lens Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes charcoal grey/- colourless/white / module yes light grey/- colourless/white /5520 Supplied as single parts: Mat lens, legend insert, diffuser foil, keycap body. Other colours on request. RS 76 Stock items are marked by bold printed order numbers. - 15

146 RS 76 - Full-travel keyswitches RS 76 MX - Keycap, fully illuminable RS 76MX, keyboard fully illuminated Size of keycap Illumination Colour of keycap / legending Colour of lens / legend insert Order no. 1-module yes white/- white translucent/ / module yes light grey/- white translucent/ /075 1¼-module yes white/- white translucent/ /0209 1½-module yes white/- white translucent/ /0209 1¾-module yes white/- white translucent/ /0209 1¼-module with light conductor yes white/- white translucent/ /0209 Laser-printed versions available on request. RS Stock items are marked by bold printed order numbers.

147

148 RS 76 - Full-travel keyswitches RS 76 - Keycaps, with legend, two-shot moulded/keycap sets Pict.: opaque light beige / brown opaque light beige / brown RS 76 - Keycap set, symbols A-Z Pict.: opaque light beige / brown Size of keycap Form of lens Colour of keycap / legending light grey / black Symbol Order no. 1-module 1-module keycap opaque with nail protection keycap opaque with nail protection charcoal grey/white A-Z /0000 light grey/black A-Z / module keycap opaque charcoal grey/white A-Z / module keycap opaque light grey/black A-Z /0000 Other symbols and colours on request. RS Stock items are marked by bold printed order numbers.

149 RS 76 - Full-travel keyswitches RS 76 - Keycap set, symbols 0-9 Pict.: opaque light beige / brown Size of keycap Form of lens Colour of keycap / legending opaque with nail protection charcoal grey / white Symbol Order no. 1-module 1-module keycap opaque with nail protection keycap opaque with nail protection charcoal grey/white /0000 light grey/black / module keycap opaque charcoal grey/white / module keycap opaque light grey/black /0000 Other symbols and colours on request. RS 76 Stock items are marked by bold printed order numbers. - 19

150 RS 76 - Full-travel keyswitches RS 76 - Accessories Pict.: light beige dark grey RS

151 RS 76 - Full-travel keyswitches RS 76 - Cover IP0 Pict.: light beige Short text Feature 1 Feature 2 Order no. RS 76 - Cover IP0, 1/-module, charcoal grey charcoal grey ¼-module /0152 RS 76 - Cover IP0, 1/-module, light grey light grey ¼-module /022 RS 76 - Cover IP0, 1/-module, light beige light beige ¼-module /0710 RS 76 - Cover IP0, 1/-module, dark grey dark grey ¼-module /0801 RS 76 - Cover IP0, 1/2-module, charcoal grey charcoal grey ½-module /0152 RS 76 - Cover IP0, 1/2-module, light grey light grey ½-module /022 RS 76 - Cover IP0, 1/2-module, light beige light beige ½-module /0710 RS 76 - Cover IP0, 1/2-module, dark grey dark grey ½-module /0801 RS 76 - Cover IP0, 3/-module, charcoal grey charcoal grey ¾-module /0152 RS 76 - Cover IP0, 3/-module, light grey light grey ¾-module /022 RS 76 - Cover IP0, 3/-module, light beige light beige ¾-module /0710 RS 76 - Cover IP0, 3/-module, dark grey dark grey ¾-module /0801 RS 76 - Cover IP0, 1-module, charcoal grey charcoal grey 1-module /0152 RS 76 - Cover IP0, 1-module, light grey light grey 1-module /022 RS 76 - Cover IP0, 1-module, light beige light beige 1-module /0710 RS 76 - Cover IP0, 1-module, dark grey dark grey 1-module /0801 Other colours on request. RS 76 Stock items are marked by bold printed order numbers

152

153 Keylock and rotary switches for PCB General Data Keylock switches for PCB mounting. Matching with the RS 76 full-travel keyswitches and the RF 15 and RF 19 short-travel keyswitches. Content MICROMEC - Keylock switch IP5-15 MICROMEC - Keylock switch IP5-156 EUROLOCKS - Keylock switch IP5-158 EUROLOCKS - Keylock switch IP5-159 Priority keylock switch IP5-160 Priority keylock switch IP5-161 Rotary switch IP0-162 Rotary switch IP Key Switches

154 Keylock and rotary switches for PCB MICROMEC - Keylock switch IP5 Pict.: light grey PCB hole pattern, component side Technical Data General information Colour Form of collar Dimensions Length of collar Width of collar Overall height Mechanical design Mounting Terminals Contact system square 19 mm 19 mm 19.5 mm Contact function Contact materials Illuminability Lock Wafers 5 Lock type 001 Number of locking positions 500 Main key Key removal position soldering tin-plated cross contact self cleaning Au alloy no Micromec on request Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max V 100 ma 100 m 200 m kv Other specifications Rotating angle Operating life 10,000 Degree of protection from IP5 front side Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C Environmental restistance acc. to IEC , -30, -33 and -78 Flammability of materials UL 9 HB Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max Nm 2 Nm 500 V 1 W Typical accessories MICROMEC - Keylock switch IP5 Description Photo Order no. Additional accessories see page O-ring for keylock switch / Spare key, for single action, e.g. 1 x 90 (delivery content 1 key) Spare key, for double action, e.g. 2 x 90 (delivery content 1 key) / /0000 Spare key for 3 angles, f.ex. 3 x 90 degree (content 1 key) /0100 Key Switches - 15 Stock items are marked by bold printed order numbers.

155 Keylock and rotary switches for PCB Typical accessories MICROMEC - Keylock switch IP5 Description Photo Order no. Additional accessories see page Spare key for angles, f.ex. x 90 degrees, /0100 (content 1 key) Configuration Diagram/Dimensional Drawing Hole patterns PCB View on component side Switching position Contact function Stock items are marked by bold printed order numbers Key Switches

156 Keylock and rotary switches for PCB MICROMEC - Keylock switch IP5 Pict.: charcoal grey Contact function Colour Rotating angle Key removal position PCB hole pattern, component side Order no. momentary charcoal grey 1 x /0000 momentary light grey 1 x /0000 latching charcoal grey 1 x /0000 latching light grey 1 x /0000 latching charcoal grey 1 x /0000 latching light grey 1 x /0000 latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 3 x /0000 latching light grey 3 x /0000 latching charcoal grey 3 x /0000 latching light grey 3 x /0000 latching charcoal grey x 90 without stop /0000 latching light grey x 90 without stop /0000 latching charcoal grey x 90 without stop /0000 latching light grey x 90 without stop /0000 Key Switches Technical data see page keys included. Other lock variants available on request Stock items are marked by bold printed order numbers.

157

158 Keylock and rotary switches for PCB EUROLOCKS - Keylock switch IP5 Pict.: light grey PCB hole pattern, component side Technical Data General information Colour Form of collar Dimensions Length of collar Width of collar Overall height Mechanical design Mounting Terminals Contact system square 19 mm 19 mm 19.5 mm Contact function Contact materials Illuminability Lock Wafers 5 Lock type 801 Number of locking positions 50 Main key Symmetric key Key removal position soldering tin-plated cross contact self cleaning latching Au alloy no Eurolocks no yes Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max V 100 ma 100 m 200 m kv Other specifications Rotating angle Operating life 10,000 Degree of protection from IP5 front side Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C Environmental restistance acc. to IEC , -30, -33 and -78 Flammability of materials UL 9 HB Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max Nm 2 Nm 500 V 1 W Typical accessories EUROLOCKS - Keylock switch IP5 Description Photo Order no. Additional accessories see page O-ring for keylock switch / Spare key (delivery content 1 key) /0000 Key Switches Stock items are marked by bold printed order numbers.

159 Keylock and rotary switches for PCB EUROLOCKS - Keylock switch IP5 Pict.: light grey Contact function Colour Rotating angle Key removal position PCB hole pattern, component side Order no. latching charcoal grey 1 x /0000 latching light grey 1 x /0000 latching charcoal grey 1 x /0000 latching light grey 1 x /0000 Technical data see page keys included. Other lock variants available on request. For the switching arrangement, refer to Micromec keylock switch IP5. Stock items are marked by bold printed order numbers Key Switches

160 Keylock and rotary switches for PCB Priority keylock switch IP5 Pict.: light grey PCB hole pattern, component side General Data Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. Technical Data General information Colour Form of collar Dimensions Length of collar Width of collar Overall height Mechanical design Mounting Terminals Contact system square 19 mm 19 mm 19.5 mm Contact function Contact materials Illuminability Lock Wafers 5 Lock type 001 Number of locking positions 500 Main key Key removal position soldering tin-plated cross contact self cleaning Au alloy no Micromec on request Electrical characteristics Rated voltage Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max V 100 ma 100 m 200 m kv Other specifications Rotating angle Operating life 10,000 Degree of protection from IP5 front side Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C Environmental restistance acc. to IEC , -30, -33 and -78 Flammability of materials UL 9 HB Mechanical characteristics Switching torque Robustness max. Dielectric strength AC min. Rated power max Nm 2 Nm 500 V 1 W Typical accessories Priority keylock switch IP5 Description Photo Order no. Additional accessories see page O-ring for keylock switch / Key Switches Stock items are marked by bold printed order numbers.

161 Keylock and rotary switches for PCB Typical accessories Priority keylock switch IP5 Description Photo Order no. Additional accessories see page Set of keys for 2 x 90 type (2 keys) /0000 Set of keys for 3 x 90 type (3 keys) /0000 Priority keylock switch IP5 Pict.: charcoal grey Contact function Colour Rotating angle Key removal position PCB hole pattern, component side Order no. latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 2 x /0000 latching light grey 2 x /0000 latching charcoal grey 3 x /0000 latching light grey 3 x /0000 latching charcoal grey 3 x /0000 latching light grey 3 x /0000 Technical data see page sets of keys included. Other lock variants available on request. For the switching arrangement, see IP5 Micromec keylock switch. Either 2 or 3 different keys are required, depending on the angle between positions. Key 1 can switch to position 1, key 2 can switch to position 1 and 2, etc. Stock items are marked by bold printed order numbers Key Switches

162 Keylock and rotary switches for PCB Rotary switch IP0 Pict.: charcoal grey PCB hole pattern, component side Technical Data General information Colour Form of collar Dimensions Length of collar Width of collar Overall height Mechanical design Mounting Terminals Contact system Contact function Contact materials Illuminability Mechanical characteristics Torque against stop min. Dielectric strength AC min. Rated power max. square 19 mm 19 mm 2 mm soldering tin-plated cross contact self cleaning Au alloy no 0.5 Nm 1 W Electrical characteristics Rated voltage max. Rated current max. Contact resistance when new max. Contact resistance acc. to life max. Insulation resistance ESD strength max. 35 V 100 ma 100 m 200 m kv Other specifications Rotating angle Operating life 50,000 Degree of protection from IP0 front side Ambient temp. operating min. -25 C Ambient temp. operating max. +70 C Storage temperature min. -0 C Storage temperature max. +80 C Environmental restistance acc. to IEC , -30, -33 and -78 Flammability of materials UL 9 HB Key Switches - 162