Build a Mini-ITX LAN Gaming PC Cooled By The Hydro H50

Size: px

Start display at page:

Download "Build a Mini-ITX LAN Gaming PC Cooled By The Hydro H50"

Megan Foster
6 years ago
Views:

Build a Mini-ITX LAN Gaming PC Cooled By The Hydro H50 Introduction Choosing a spacious chassis is a good idea when building a monster, quad-core gaming PC, since this makes it easier to install

By contrast, compact chassis concentrate the heat from components into a smaller space, resulting in hotter air inside the chassis, which reduces the cooling performance of CPU and GPU HSFs.

However, if you regularly attend LAN gaming events, or simply need a second PC, a smaller chassis can be a good idea. But how do you build such a system without compromising cooling and performance?

1 Build a Mini-ITX LAN Gaming PC Cooled By The Hydro H50 Introduction Choosing a spacious chassis is a good idea when building a monster, quad-core gaming PC, since this makes it easier to install components and keep them cool, due to the larger volume of air. Corsair s Obsidian 800D chassis is a great example of this, which is why it s ideal for high-end PCs. By contrast, compact chassis concentrate the heat from components into a smaller space, resulting in hotter air inside the chassis, which reduces the cooling performance of CPU and GPU HSFs. This imposes a realistic limit on what CPU and graphics card you can use, since more powerful CPUs generate more heat. However, if you regularly attend LAN gaming events, or simply need a second PC, a smaller chassis can be a good idea. But how do you build such a system without compromising cooling and performance? In order to build a powerful, compact PC based around a quad-core CPU and DirectX 10.1 graphics card we need a powerful CPU cooler that can take advantage of cool air from outside the PC in order to maximise cooling performance. Well, it just so happens that Corsair has the perfect product the Hydro Series H50 High-Performance CPU Cooler! But just how small can a quad-core PC really be? The answer, thanks to the cooling ability of the Corsair H50, is very small indeed. We re going to show you how to build a monster quad-core gaming PC using a Mini-ITX motherboard, measuring a measly 6.7 x 6.7in. You re pulling my leg, right? Nope. Thanks to the H50 s cooling prowess we can build a quad-core LAN gaming system in a Mini-ITX chassis that will run Prime95 s CPU torture test, stressing all CPU cores at 100% load for maximum heat output, at a CPU temperature of 53 C. We re going to show you how, using an LGA775 Core 2 Quad Q9450 quad-core processor, a Zotac GeForce 9300-ITX WiFi Mini-ITX motherboard and GeForce GT 220 graphics card, 4GB of Corsair Dominator RAM and a 256GB Corsair P256 solid-state drive, all installed in Silverstone s SG05 chassis. You could, of course, use one of the new P55-based Mini-ITX boards and combine this with a quad-core Core i5 or Core i7 Lynnfield CPU instead. However, we think that many of you will have Core 2 Duo and Core 2 Quad CPUs left over from previous upgrades to Core i7 or Core i5 platforms, and what better way to put one of these CPUs to use than in a shoebox-sized gaming PC?

Component List Intel Core 2 Quad 9450 processor Zotac GeForce 9300-ITX WiFi motherboard Corsair Hydro Series H50 CPU cooler Windows 7 Ultimate 64-bit 4GB Corsair Dominator (TWIN2X4096-8500C5D)

trays, following the steps outlined in the chassis manual so that you have a blank canvass to work with. Since we re using a 2.

It s also worth installing the motherboard I/O shield (the thin metal plate that covers the connectors on the motherboard back panel) at this point too.

2 Component List Intel Core 2 Quad 9450 processor Zotac GeForce 9300-ITX WiFi motherboard Corsair Hydro Series H50 CPU cooler Windows 7 Ultimate 64-bit 4GB Corsair Dominator (TWIN2X C5D) Corsair P256 solid-state drive Silverstone SG05 chassis Building the system - step-by-step Deconstruct the chassis The first step is to unpack the SG05 chassis and remove all the panels and drive trays, following the steps outlined in the chassis manual so that you have a blank canvass to work with. Since we re using a 2.5in Corsair Performance P256 solid-state drive, we can remove and discard the 3.5in drive tray (far left of image), which not only frees up more space inside the chassis but improves airflow too. It s also worth installing the motherboard I/O shield (the thin metal plate that covers the connectors on the motherboard back panel) at this point too. You ll find the I/O shield in the motherboard box. Install the solid-state drive Installing the solid-state drive is one of the easiest jobs so it s a good one to get it out of the way early on. The 2.5in mount is on the underside of the optical drive tray and the drive simply attaches with the four screws supplied. Simple 256GB of luscious solid-state storage, ready to go! Solid-state drives are ideal for Mini-ITX PCs such as this one due to their small size, low power and noise and awesome speed! Fitting the H50 s Radiator unit One slight snag with building this system is that the chassis understandably wasn t designed with liquid cooling in mind. This means that installing the H50 as per the instruction booklet causes a minor issue, in that the radiator unit butts up against the 2.5in drive tray, preventing it from being installed. The simplest way to work around this is to switch the position of the fan to the other side of the radiator unit and

To allow the drive tray to fit the fan needs to sit lower on the radiator, necessitating the use of cables ties instead of screws attach it using cable ties.

This creative solution was employed by Kim over at www.itrends.dk, so thanks to him for the idea! Fix the fan to the radiator using cables ties, as shown in the images here.

Pull the ties as tightly as possible without altering the position of the fan. The next step is to fix the radiator to the chassis.

Due to the modified method of installing the fan, you no longer need to use the long 6-32 x 1-1/4 screws supplied in the box with the H50.

3 To allow the drive tray to fit the fan needs to sit lower on the radiator, necessitating the use of cables ties instead of screws attach it using cable ties. This provides some flexibility with respect to where the fan can be positioned, allowing you to lower it relative to the radiator in order to accommodate the 2.5in drive tray. This creative solution was employed by Kim over at so thanks to him for the idea! Fix the fan to the radiator using cables ties, as shown in the images here. Take note of the positioning carefully, as the fan needs to be closer to the floor of the chassis than the radiator once installed. Pull the ties as tightly as possible without altering the position of the fan. The next step is to fix the radiator to the chassis. To do this, remove the existing fan, but keep hold of the screws because you ll need them. Due to the modified method of installing the fan, you no longer need to use the long 6-32 x 1-1/4 screws supplied in the box with the H50. Simply use the standard case screws to fix the radiator to the front fan mount, as shown, with the tubing on the right side of the chassis as you look at it from the front. Leave the pump unit dangling on the outside of the chassis so that you still have room to fit the motherboard, which is the next step. Due to the modified method of installing the H50 s radiator unit, the screws supplied in the box with the H50 aren t needed. Instead, fit the radiator to the front 120mm mounting using standard case screws, as shown below.

Fitting the H50 mounting backplane With the H50 installed into the chassis you can now fit the mounting brackets for the H50 s pump/cold plate unit to the motherboard.

To install the backplate and bracket you can follow the instructions supplied with the H50, or take a look at the video installation guide, here.

as shown. Then simply fix the backplate to the underside of the motherboard. Also, make sure that you re using the correct screw mounting blocks for the top-side of the mounting bracket.

Installing the motherboard and H50 pump unit The new multi-socket CPU bracket supports LGA775,, LGA1156 (Lynnfield) and LGA1366 (Bloomfield) The next job is to install the motherboard into the

The pump unit, however, is slightly trickier simply because the PSU unit blocks access to the screws. This is easily remedied, though, as you can temporarily remove the PSU.

4 Fitting the H50 mounting backplane With the H50 installed into the chassis you can now fit the mounting brackets for the H50 s pump/cold plate unit to the motherboard. And, for convenience, you can also install the CPU and memory, ready for installing the motherboard into the chassis. To install the backplate and bracket you can follow the instructions supplied with the H50, or take a look at the video installation guide, here. The versatile bracket supports all the current Intel sockets, and since we re installing an LGA775 CPU we simply need to move the metal bolts in the bottom half of the bracket to the LGA775 position, as shown. Then simply fix the backplate to the underside of the motherboard. Also, make sure that you re using the correct screw mounting blocks for the top-side of the mounting bracket. For more detailed information and images, check out the video. Installing the motherboard and H50 pump unit The new multi-socket CPU bracket supports LGA775,, LGA1156 (Lynnfield) and LGA1366 (Bloomfield) The next job is to install the motherboard into the chassis and then attach the pump unit. The Zotac motherboard is tiny and installs using only four screws, which are easy to fix. The pump unit, however, is slightly trickier simply because the PSU unit blocks access to the screws. This is easily remedied, though, as you can temporarily remove the PSU. With the PSU removed, follow the instructions that come with the Hydro H50 to fit the pump unit. To do this, loosely attach the bracket by adding a few turns to each screw so that the bracket is fixed in place but not fully tightened. Then, slide the pump unit through the bracket onto the CPU and then twist it so that the notches on the pump unit match up with the teeth on the bracket. Then tighten the screws, adding a quarter turn to each screw in turn, working in a crosswise pattern (i.e. the bottom left screw followed by top right, followed by the bottom left and so on). Stop when the pump unit is secure. Don t overtighten the screws or you could cause them to snap off.

Complete assembly and boost the graphics! With the main components now installed, re-fit the power supply and drive tray and neaten up the wiring, ready to install the graphics card.

With everything tidied up and screwed down, it s time to unpack the graphics card and upgrade the 3D gaming capabilities of this miniature monster PC.

which is certainly good enough for many popular games and multimedia tasks.

5 Complete assembly and boost the graphics! With the main components now installed, re-fit the power supply and drive tray and neaten up the wiring, ready to install the graphics card. Cable routing is always tricky in such a small chassis, but it s also very important, because excess cable clutter will restrict airflow and limit the cooling potential. With everything tidied up and screwed down, it s time to unpack the graphics card and upgrade the 3D gaming capabilities of this miniature monster PC. Of course, if you re not planning to use the system for gaming (at least for modern games) then simply skip the graphics card part and use the on-board GeForce 9300 graphics on the Zotac motherboard, which is certainly good enough for many popular games and multimedia tasks. However, we decided to add a 1GB Zotac GeForce GT 220 graphics card, which is a good compromise between performance and power usage, given that SG05 has only a 300W PSU. Let s see what she can do... The Hydro H50-cooled Mini-ITX LAN gaming PC is now completed, so all that s left to do is put it though its paces to gauge the cooling effectiveness of the H50 in this miniaturised gaming system. For all the tests we set the Smart Fan controls to Medium in the BIOS, which runs the Corsair 120mm fan at around rpm, which is extremely quiet (ideal if you re using this as a media / HTPC). We tested the cooling performance using the 64-bit version of Prime95, and after running the In-Place Large FFTs test for several hours, the CPU temperature never exceeded 53 C, demonstrating the awesome effectiveness of the Hydro H50 CPU Cooler. In terms of gaming performance, the GeForce GT 220 has enough grunt to run modern games at medium to high settings at mid resolutions, and older/less demanding games ran perfectly. So whether it s a high-end PC in a full tower chassis, or a diminutive Mini-ITX PC in a shoebox-sized chassis, the Corsair Hydro H50 CPU cooler is more than up to the task. December 2009, Corsair Memory, Inc. The finished Mini ITX gaming PC, complete with GeForce GT 220 and Corsair Hydro H50 CPU cooler! All rights reserved. All trademarks and registered trademarks are the property of their respective owners in the United States and/or other countries.

H115i QUICK START GUIDE

H115i QUICK START GUIDE TM Included Hardware Highlighted parts for Intel installation only A x8 LONG FAN SCREWS B x4 LGA 115X / 1366 STANDOFF C x4 LGA 2011/2011-3 STANDOFF F x8 D x4 AMD BLACK STANDOFF E x4 THUMBSCREWS G CORSAIR