Rack Mount Panel PC. Military Grade. User Manual Version 1.0 Document Part Number: I100U. 17 / 19 / 24 Touchscreen Intel Core i7 4650U 3.

Transcription

1 Rack Mount Panel PC 17 / 19 / 24 Touchscreen Intel Core i7 4650U 3.30 GHz Military Grade Model No: R17IH3S-MLA1-89 R19IH3S-MLA3-89 W24IH3S-MLS1-89 User Manual Version 1.0 Document Part Number: I100U

2 USER MANUAL PREFACE PREFACE Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We reserve the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. We assume no responsibility or liability for the use of the described product(s) conveys no license or title under any patent, copyright, or masks work rights to these products, and make no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or guarantee that such application will be suitable for the specified use without further testing or modification. Warranty Our warranty guarantees that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the customer discovers a defect, we will, at his/her option, repair or replace the defective product at no charge to the customer, provide it is returned during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service. If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the serial numbers the third and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g., with A for October, B for November and C for December). For example, the serial number 1W15Axxxxxxxx means October of year ii MILITARY RACK MOUNT PANEL PC

3 USER MANUAL PREFACE Customer Service We provide a service guide for any problem by the following steps: First, visit the website of our distributor to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance. You may need the following information ready before you call: Product serial number Software (OS, version, application software, etc.) Detailed description of the problem The exact wording of error messages In addition, free technical support is available from our engineers every business day. We are always ready to give advice on application requirements or specific information on the installation and operation of any of our products. MILITARY RACK MOUNT PANEL PC iii

4 USER MANUAL PREFACE Advisory Conventions Four types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. NOTE: A note is used to emphasize helpful information IMPORTANT: An important note indicates information that is important for you to know. CAUTION/ ATTENTION A Caution alert indicates potential damage to hardware and explains how to avoid the potential problem. Une alerte d attention indique un dommage possible à l équipement et explique comment éviter le problème potentiel. WARNING! / AVERTISSEMENT! An Electrical Shock Warning indicates the potential harm from electrical hazards and how to avoid the potential problem. Un Avertissement de Choc Électrique indique le potentiel de chocs sur des emplacements électriques et comment éviter ces problèmes. ALTERNATING CURRENT / MISE À LE TERRE! The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk of serious electrical shock due to improper grounding. Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à la terre incorrecte. iv MILITARY RACK MOUNT PANEL PC

5 USER MANUAL PREFACE Safety Information WARNING! / AVERTISSEMENT! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Toujours débrancher le cordon d alimentation du chassis lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque l alimentation est présente. Des composantes électroniques sensibles peuvent être endommagées par des sauts d alimentation. Seulement du personnel expérimenté devrait ouvrir ces chassis. CAUTION/ATTENTION Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. Toujours verifier votre mise à la terre afin d éliminer toute charge statique avant de toucher la carte CPU. Les équipements électroniques moderns sont très sensibles aux décharges d électricité statique. Toujours utiliser un bracelet de mise à la terre comme précaution. Placer toutes les composantes électroniques sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique lorsqu elles ne sont pas dans le chassis. MILITARY RACK MOUNT PANEL PC v

6 USER MANUAL PREFACE Safety Precautions For your safety carefully read all the safety instructions before using the device. All cautions and warnings on the equipment should be noted. Keep this user manual for future reference. CAUTION/ATTENTION Do not cover the openings! Ne pas couvrir les ouvertures! *Let service personnel to check the equipment in case any of the following problems appear: o The power cord or plug is damaged. o Liquid has penetrated into the equipment. o The equipment has been exposed to moisture. o The equipment does not work well or you cannot get it to work according to the user manual. o The equipment has been dropped and damaged. o The equipment has obvious signs of breakage. Do not leave this equipment in an uncontrolled environment where the storage temperature is below -20 C (-4 F) or above 60 C (140 F). It may damage the equipment. CAUTION/ATTENTION Use the recommended mounting apparatus to avoid risk of injury. Utiliser l appareil de fixation recommandé pour éliminer le risque de blessure. WARNING! / AVERTISSEMENT! Only use the connection cords that come with the product. When in doubt, please contact the manufacturer. Utiliser seulement les cordons d alimentation fournis avec le produit. Si vous doutez de leur provenance, contactez le manufacturier. WARNING!/ AVERTISSEMENT! Always ground yourself against electrostatic damage to the device. Toujours vérifier votre mise à la terre afin que l équipement ne se décharge pas sur vous. vi MILITARY RACK MOUNT PANEL PC

7 USER MANUAL PREFACE Important Information Countries/ Area European Union Symbol This equipment complies with essential requirements of: Electromagnetic Compatibility Directive(2014/30/EU) Low Voltage Directive (2014/35/EU) Restrictions of the use of certain hazardous substances (RoHS) Directive (2011/65/EU) USA FCC Part 15 Subpart B Regulations Class B Federal Communications Commission Radio Frequency Interface Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "A" digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at him own expense. MILITARY RACK MOUNT PANEL PC vii

8 USER MANUAL PREFACE European Union This equipment is in conformity with the requirement of the following EU legislations and harmonized standards. Product also complies with the Council directions. Electromagnetic Compatibility Directive (2014/30/EU) EN55024: 2010 EN 55022: 2010 Class B o IEC : 2009 o IEC : 2006+A1: 2007+A2: 2010 o IEC : 2012 o IEC : 2014 o IEC : 2013 o IEC : 2010 o IEC : 2004 EN55022: 2010/AC:2011 EN :2014 EN :2013 Low Voltage Directive (2014/35/EU) EN :2006/A11:2009/A1:2010/A12:2011/ A2:2013 viii MILITARY RACK MOUNT PANEL PC

9 USER MANUAL ABOUT THIS USER MANUAL ABOUT THIS USER MANUAL This User Manual provides information about using the Winmate Military Grade Panel PC (IH32). The documentation set for the Military Grade Panel PC (IH32) provides information for specific user needs, and includes: Military Grade Panel PC (IH32) User Manual contains detailed description on how to use the device, its components and features. NOTE: Some pictures in this guide are samples and can differ from actual product. Document Revision History Version Date Note June-2016 Initial release MILITARY RACK MOUNT PANEL PC ix

10 USER MANUAL CONTENTS CONTENTS PREFACE... ii ABOUT THIS USER MANUAL... ix CHAPTER 1: INTRODUCTION Product Features Hardware Specifications Package Contents Appearance Appearance On-Screen Display Control Dimensions Dimensions Dimensions Dimensions CHAPTER 2: GETTING STARTED Powering On Power Considerations Connecting the Power Connecting Other Devices AC Power Connector VGA Connector RS-232 Connector USB 2.0 A Type Connector LAN Connector Turning ON /OFF CHAPTER 3: MOUNTING Cable Mounting Considerations Safety Precautions Mounting Guide Console / Rack Mounting VESA Mounting x MILITARY RACK MOUNT PANEL PC

11 USER MANUAL PREFACE CHAPTER 4: MAINTENANCE Cleaning the Display Screen Cleaning the Casing CHAPTER 5: DRIVER INSTALLATION Chipset Driver Graphics Driver Audio Driver Ethernet Driver Intel Management Engine Software USB 3.0 Driver Installation (Windows 7) CHAPTER 6: BIOS SETUP How and When to Use BIOS Setup BIOS Functions Main Menu Advanced Settings Chipset Menu Boot Menu Security Menu Save & Exit Using Recovery Wizard to Restore Computer CHAPTER 7: TECHNICAL SUPPORT Introduction Winmate Download Center Winmate File Share Problem Report Form APPENDIX A: MIL-STD-810F/G COMPLIANCE APPENDIX B: MIL-STD-461E/F COMPLIANCE MILITARY RACK MOUNT PANEL PC xi

12

13 USER MANUAL CHAPTER 1 INTRODUCTION INTRODUCTION This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the Panel PC in the packing list. MILITARY RACK MOUNT PANEL PC 1

14 USER MANUAL CHAPTER 1 INTRODUCTION CHAPTER 1: INTRODUCTION Thank you for choosing Winmate Military Grade Panel PC. This series feature low power high performance CPU with fanless design. Anti-corrosive coating with aluminum alloy housing withstands the harshest military environments. Armored connectors MIL- DTL (type I and III) initially developed for aerospace industry perfectly fit in our Military grade product line. Withstanding rigors of harsh environments and tough weather conditions these Panel PCs meet the most demanding requirements. Suitable for Army Headquarters and being connected to mobile devices on the field Panel PC can provide up-to-date information for immediate commands. 1.1 Product Features Winmate Military Grade Rack Mount Panel PCs offer the following features: Intel Core i7 4650U 3.30GHz processor Fanless, streamlined enclosure for highly efficient heat dissipation Aluminum housing with anti-corrosive coating 5-wire resistive touch Convenient on-screen display control Built-in Light Sensor for auto brightness control AC 110~240V Power input (default) with isolation DC 9~36V (Optional) Flush Rack / Rack Mount mechanical design (8U) Military Grade connectors (MIL-DTL-38999/1 and 38999/3) Compliance with military standard MIL-STD-810G/F 2 MILITARY RACK MOUNT PANEL PC

15 USER MANUAL CHAPTER 1 INTRODUCTION 1.2 Hardware Specifications Model Name R17IH3S-MLA1-89 R19IH3S-MLA3-89 W24IH3S-MLS1-89 Display Size Resolution 1280 x x x 1200 Brightness 350 cd/ (typ.) 350 cd/ (typ.) 300 cd/ (typ.) Contrast Ratio 1000:1 (typ.) 1000:1 (typ.) 1000:1 (typ.) Viewing Angle -85~85(H);-80~80(V) -85~85(H);-80~80(V) -89~89(H);-89~89(V) Display colors 16.7M (colors) System Processor Intel Core i7 4650U 3.30GHz BIOS AMI 16Mbit Flash System Memory 1 x SO-DIMM DDR3L 1600 (Default 4GB) System Chipset Intel HD Graphics 5000 Storage msata SSD (default 64GB) LAN Controller Intel Ethernet Controller 1211-AT + Intel Gigabit Ethernet PHY 1218-LM Expansion Slot 1 x Mini PCIe slot (For USB module) *For PCI expansion customized housing required. Input/ Output Plug & Play VESA DDC 1/2B Back panel I/O ports Environment and Mechanical 1 x Power Input (MIL-DTL-38999/1) 1 x VGA (MIL-DTL-38999/3) 1 x RS232 (MIL-DTL-38999/3) 1 x USB 2.0 A Type (MIL-DTL-38999/3) 1 x LAN (MIL-DTL-38999/3) Operating Temperature -20 C to +60 C Operating Humidity 95%RH ±3% Power Specifications Power Input Default AC 110~240V IN Optional isolation DC 9~36V IN Ordering Information (Optional) Touch 5-wire resistive / 5-wire resistive with EMI coating Glass EMI coating glass (Default AR glass) Storage msata SSD up to 256GB RAM SO-DIMM DDR3 1666, up to 8GB Power Optional isolation 9~36V DC IN OS Windows 10 IoT Enterprise Windows Embedded 8.1 Industry Windows Embedded 8 Standard Windows Embedded Standard 7 MILITARY RACK MOUNT PANEL PC 3

16 USER MANUAL CHAPTER 1 INTRODUCTION 1.4 Package Contents Carefully remove the box and unpack your device. Please check if all the items listed below are inside your package. If any of these items are missing or damaged contact us immediately. Standard factory shipment list: Panel PC Varies by product specifications User Manual (Hardcopy) I100U CD-ROM with Driver Utility IH32: I102S Power cord MIL-DTL-38999/1 VGA Cable MIL-DTL-38999/3 RS-232 Cable MIL-DTL-38999/3 94B (US) K1 94G K1 4 MILITARY RACK MOUNT PANEL PC

17 USER MANUAL CHAPTER 1 INTRODUCTION 1.5 Appearance This section includes appearance and input/ output connectors layout Appearance MILITARY RACK MOUNT PANEL PC 5

18 USER MANUAL CHAPTER 1 INTRODUCTION On-Screen Display Control On-Screen Display (OSD) is a user-friendly interface to remote the display function and to adjust the display s image properties. It also supports special Hot Keys for easy control, such as auto-adjustment and brightness control for backlight Control Keys Icon Button Function Power Turn ON or turn OFF the Panel PC. Brightness DOWN Brightness UP Night Decrease the brightness of the display screen, or allows user to navigate items of a single OSD menu. Increase the brightness of the display screen, or allows user to navigate items of a single OSD menu. Tap this button to enter NIGHT MODE to increase visibility in low-light conditions. Day Auto/ Manual Reset Tap this button to enter DAY MODE. Tap the button once to AUTOMATICALLY adjust brightness mode. Press the button again to MANUALLY adjust brightness mode. Clear any pending errors or events and brings a system to normal condition or an initial state. LOCK Tap this button to lock the function of OSD panel. 6 MILITARY RACK MOUNT PANEL PC

19 USER MANUAL CHAPTER 1 INTRODUCTION LED Indicators Indi Color Definition cato r PWR Green Power is ON and the device functions normally Orange Panel PC is suspended HDD Green HDD is active LOC K OFF Red OFF HDD is inactive The function of OSD buttons is locked Lock function disabled MILITARY RACK MOUNT PANEL PC 7

20 USER MANUAL CHAPTER 1 INTRODUCTION 1.6 Dimensions This section includes mechanical drawing and dimensions of Panel PCs Dimensions 17 Unit: mm *Tolerance of all dimensions is shown as follow 0~30 mm ± 0.1 mm, 30~50 mm ± 0.15 mm, 50~120 mm ± 0.2 mm, above 120 mm ± 0.25 mm. 8 MILITARY RACK MOUNT PANEL PC

21 USER MANUAL CHAPTER 1 INTRODUCTION Dimensions 19 Unit: mm *Tolerance of all dimensions is shown as follow 0~30 mm ± 0.1 mm, 30~50 mm ± 0.15 mm, 50~120 mm ± 0.2 mm, above 120 mm ± 0.25 mm. MILITARY RACK MOUNT PANEL PC 9

22 USER MANUAL CHAPTER 1 INTRODUCTION Dimensions 24 Unit: mm **Tolerance of all dimensions is shown as follow 0~30 mm ± 0.1 mm, 30~50 mm ± 0.15 mm, 50~120 mm ± 0.2 mm, above 120 mm ± 0.25 mm. 10 MILITARY RACK MOUNT PANEL PC

23 USER MANUAL CHAPTER 2 GETTING STARTED GETTINGS STARTED This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations. MILITARY RACK MOUNT PANEL PC 11

24 USER MANUAL CHAPTER 2 GETTING STARTED CHAPTER 2: GETTING STARTED This chapter provides information on how to connect the device to the source of power, connector pinouts and the guideline to turn on/off the Panel PC. 2.1 Powering On Power Considerations The device operates on external DC power. ALTERNATING CURRENT / MISE À LE TERRE! This product must be grounded. Use only a grounded AC outlet. Install the additional PE ground wire if the local installation regulations require it. *If you do not use a grounded outlet while using the device, you may notice an electrical tingling sensation when the palms of your hands touch the device. Ce produit doit être mis à la terre. Utiliser seulement un cordon d alimentation avec mise à la terre. Si les règlements locaux le requiert, installer des câbles de mise à la terre supplémentaires. *Si vous n utiliser pas une prise d alimentation avec mise à la terre, vous pourriez remarquer une sensation de picotement électrique quand la paume de vos mains touche à l appareil. Plug-in the power cord to easy accessible AC outlet. Plug-in the AC adapter to a grounded outlet. 12 MILITARY RACK MOUNT PANEL PC

25 USER MANUAL CHAPTER 2 GETTING STARTED Connecting the Power Connecting to AC Input Power Source (Default) 1. Connect one end of the Military Grade power connector MIL-DTL-38999/1 to the Panel PC. 2. Plug the other end of the power connector in to a working AC outlet. AC Power Requirements: AC Input Voltage Range Power Rating 115~230V AC 50-60Hz 100~240V AC 47-63Hz 100W Max Note: Power cords vary in appearance by region and country. WARNING!/ AVERTISSEMENT! Serious injury due to shock is possible if unit is wired incorrectly or connected to voltage exceeding the input voltage range. Des blessures graves en raison du choc est possible si l'unité est mal câblé ou connecté à la tension maximale de la plage de tension d'entrée. MILITARY RACK MOUNT PANEL PC 13

26 USER MANUAL CHAPTER 2 GETTING STARTED Connecting to DC Input Power Source (Optional) 1. Insert the exposed wires of the DC Power Cable to the appropriate connectors on the terminal block plug. 2. Plug the terminal block plug firmly to the DC IN Jack. 3. Connect the other end of the DC power cable (wires with lug terminals that are labeled + and to the terminals of the 9-36V DC Power Source). Ensure that the power connections maintain the proper polarity. DC Power Requirements DC Input Voltage Range Power Rating 9-36V DC IN 9-36V DC IN 100W Max CAUTION/ ATTENTION Make sure that the polarization of the power lines is correct and complete including earth ground and PE. Assurez-vous que la polarisation des lignes électriques est correcte et complète, y compris la terre et le PE. 14 MILITARY RACK MOUNT PANEL PC

27 USER MANUAL CHAPTER 2 GETTING STARTED 2.2 Connecting Other Devices Note that all the connectors are military grade and comply with military standard. AC IN VGA RS-232 USB 2.0 LAN WARNING!/ AVERTISSEMENT! Make sure the power is off when connecting and disconnecting the connectors. Assurez-vous que l'alimentation est coupée lors de la connexion et la déconnexion des connecteurs AC Power Connector Connect one end of the military grade power connector MIL-DTL-38999/1 to the Panel PC (CN2), and the other end of connector to the power source (CN1). Pin Symbols Color Pin Symbols Color CN-1 N White CN2-1 A White CN1-2 L Black CN2-2 B Black CN1-3 E Green CN2-3 C Green Note: *Power cable shown at the picture above is for the U.S.A and North America. **Power cables vary in appearance by region and country. Your package includes power cable based on your order. MILITARY RACK MOUNT PANEL PC 15

28 USER MANUAL CHAPTER 2 GETTING STARTED VGA Connector Plug one end of the 15-pin D-Sub signal cable (CN1) to the video signal MIL-DTL-38999/3 connector at the rear of the PC system and the other end (CN2) to the display. Pin Symbol Color Pin Symbol Color CN1-1 R Red CN2-4 R Red Coaxial CN1-2 R-GND Black CN2-9 GND Black cable CN1-3 G Green CN2-6 G Green Coaxial CN1-4 G-GND Black CN2-9 GND Black cable CN1-5 B Blue CN2-8 B Blue Coaxial CN1-6 B-BNG Black CN2-10 GND Black cable CN1-7 SDA Yellow CN2-1 SDA Yellow CN1-8 HS Orang e CN2-5 HS Orange CN1-9 VS White CN2-7 VS White CN1-10 SCL Brown CN2-3 SCL Brown 16 MILITARY RACK MOUNT PANEL PC

29 USER MANUAL CHAPTER 2 GETTING STARTED RS-232 Connector Connect one side of the serial port cable to the MIL-DTL-38999/3 RS-232 connector on the Panel PC (CN1) and the other side to Serial COM interface (CN2). Pin Symbol Color Pin Symbol Color CN1-1 DCD Green CN2-1 DCD Green CN1-2 DSR Brown CN2-6 DSR Brown CN1-3 RXD Red CN2-2 RXD Red CN1-4 RTS Orange CN2-7 RTS Orange CN1-5 TXD Blue CN2-3 TXD Blue CN1-6 CTS White CN2-8 CTS White CN1-7 DTR Purple CN2-4 DTR Purple CN1-8 RI Yellow CN2-9 RI Yellow CN1-9 GND Black CN2-5 GND Black Braid Shell Braid Shell MILITARY RACK MOUNT PANEL PC 17

30 USER MANUAL CHAPTER 2 GETTING STARTED USB 2.0 A Type Connector Military Grade Rack Mount Panel PC has a USB 2.0 is a MIL-DTL-38999/3 connector. Use military grade USB 2.0 cable (not supplied by Winmate) to connect the panel PC to the external USB 2.0 compatible device, for example mouse or keyboard LAN Connector Pin Signal Name Pin Signal Name 1 +5V 2 Data- 3 Data+ 4 GND Military Grade Rack Mount Panel PC has an Ethernet MIL-DTL-38999/3 connector. Use military grade cable (not supplied by Winmate) to connect the panel PC to Ethernet interface. Pin Signal Name Pin Signal Name 1 RD+ 2 RD- 3 TD+ 4 NC 5 NC 6 TD- 7 NC 8 NC 18 MILITARY RACK MOUNT PANEL PC

31 USER MANUAL CHAPTER 2 GETTING STARTED 2.4 Turning ON /OFF To Turn ON the Panel PC: 1. Tap the power button to turn the Panel PC on. 2. Press DEL to enter the CMOS setting and check the BIOS setup. The Power Switch is located on the front side OSD panel. You can Turn OFF the device with the Windows power settings. To shut down the device: 1. Tap Start > Shut down. 2. Wait for your device to completely turn off before disconnecting the power cord (if necessary). MILITARY RACK MOUNT PANEL PC 19

32 USER MANUAL CHAPTER 3 MOUNTING MOUNTING This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. 20 MILITARY RACK MOUNT PANEL PC

33 USER MANUAL CHAPTER 3 MOUNTING CHAPTER 3: MOUNTING This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. WARNING! / AVERTISSEMENT! Follow mounting instructions and use recommended mounting hardware to avoid the risk of injury. Suivez les instructions de montage et d'utilisation recommandé le matériel de montage pour éviter le risque de blessure. 3.1 Cable Mounting Considerations For a nice look and safe installation, make sure cables are neatly hidden behind the device. WARNING! / AVERTISSEMENT! Observe all local installation requirements for connection cable type and protection level. Suivre tous les règlements locaux d installations, de câblage et niveaux de protection. WARNING! / AVERTISSEMENT! Turn off the device and disconnect other peripherals before installation. Éteindre l appareil et débrancher tous les périphériques avant l installation. ALTERNATING CURRENT / MISE À LE TERRE! To prevent electrical shock, the Safety Ground location on the rear must be bonded to the local earth ground through a minimum 12 AWG wire as short as possible. Pour éviter les chocs électriques, l emplacement de la prise terre à l arrière doit être lié à terre locale, à travers un 12 AWG minimum et aussi court que possible. MILITARY RACK MOUNT PANEL PC 21

34 USER MANUAL CHAPTER 3 MOUNTING 3.2 Safety Precautions Observe the following common safety precautions before installing any electronic device: Use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must be crossed make sure the wires are perpendicular at the intersection point. Keep the wires separated according to the interface. Wires that share similar electrical characteristics must be bundled together. Do not bundle input wiring with output wiring. Keep them separate. When necessary, it is strongly advised that you label wiring to all devices in the system. 3.3 Mounting Guide Military Grade Panel PC comes with different mounting options suitable for most of the industrial and commercial applications. Refer to sub-sections below for more details Console / Rack Mounting The main mounting approach is rack mount - very user-friendly in terms of installation. Cutout dimensions ( W x D in mm) x x x 387 Screws M6 truss head (4 pcs) 22 MILITARY RACK MOUNT PANEL PC

35 USER MANUAL CHAPTER 3 MOUNTING Mounting Steps: 1. Prepare a fixture for the specific dimensions of the device. 2. Cut a hole on a sub frame or panel according to the cutout dimensions. 3. Install the device properly onto the cutout area of the sub frame or panel with the sides of the front bezel. 4. Fix the device from the outside to the fixture with four M6 truss head screws. MILITARY RACK MOUNT PANEL PC 23

36 USER MANUAL CHAPTER 3 MOUNTING VESA Mounting Military Rack Mount Panel PC supports VESA Mount installation. Notice that VESA Plate is not included in Winmate s standard accessories package. Tools Needed VESA Plate 100 x 100 mm *with customer s bracket Mounting Steps: 1. Screw VESA Bracket to the fixture (ex. wall). 2. Place the device on VESA bracket. 3. Continue with the instructions provided with your VESA-compatible wall bracket (not supplied by Winmate). 24 MILITARY RACK MOUNT PANEL PC

37 USER MANUAL CHAPTER 4 MAINTENANCE MAINTENANCE This chapter provides information on regular cleaning and maintenance procedures. Follow all the recommendations included in this chapter in order to ensure long product lifecycle. MILITARY RACK MOUNT PANEL PC 25

38 USER MANUAL CHAPTER 4 MAINTENANCE CHAPTER 4: MAINTENANCE This chapter includes regular cleaning and maintenance procedures. Follow all the recommendations in this chapter in order to ensure long product lifecycle. This equipment is extremely rugged and does not require a lot of maintenance. Remember that electrical equipment should be handled with care and used accordingly to its specifications. 4.1 Cleaning the Display Screen Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. Do not use acetone, ethyl alcohol, toluene, ethyl acid or methyl chloride to clear the panel. It may permanently damage the display screen. You can apply a small amount of non-ammonia; non-alcohol based glass cleaner onto a clean, soft, lint-free cloth and wipe the screen. Never spray or pour any liquid directly on the screen or case. Do Not use water or oil directly on the display screen. If droplets are allowed to drop on the screen, permanent staining or discoloration may occur. 4.2 Cleaning the Casing Use the following procedure to clean the equipment. CAUTION/ ATTENTION Always turn off the device and disconnect other peripherals before cleaning and maintenance procedures. Toujours éteindre l appareil et débrancher tous les périphériques avant que les procédures de nettoyage et d'entretien. Before Cleaning: Make sure the device is turned off. Disconnect the power cable from any AC outlet. When Cleaning: Wipe dust off the outside casing with a cloth slightly moistened with water or mild ammonia-based cleaning solution. Do not use this cloth on a display screen! Do not use an abrasive cleaner or high pressure washer on the screen. Do not rub the unit with a dry cloth. This action can result in a static charge being built up and cause a spark. Always use damp cloth while cleaning the unit. WARNING!/ AVERTISSEMENT! POTENTIAL ELECTROSTATIC CHARGE HAZARD SEE INSTRUCTIONS POTENTIEL ÉLECTROSTATIQUE CHARGE DANGER - VOIR INSTRUCTIONS 26 MILITARY RACK MOUNT PANEL PC

39 USER MANUAL CHAPTER 5 DRIVER INSTALLATION DRIVER INSTALLATION This chapter describes how to install all necessary drivers. MILITARY RACK MOUNT PANEL PC 27

40 USER MANUAL CHAPTER 5 DRIVER INSTALLATION CHAPTER 5: DRIVER INSTALLATION This chapter provides guideline to driver installation. 5.1 Chipset Driver The Intel Chipset Drivers should be installed first before the software drivers enable Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. Step 1 Insert the CD that comes with the motherboard. Open the file document Chipset Driver and click Setup.exe to install driver. 28 MILITARY RACK MOUNT PANEL PC

41 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 2 Click Next to start the installation. Step 3 Click Next to continue the installation. MILITARY RACK MOUNT PANEL PC 29

42 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 4 Click Yes, I want to restart this computer now to finish installation. 30 MILITARY RACK MOUNT PANEL PC

43 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.2 Graphics Driver You need to install the Graphic driver to enable the function. Intel Graphic supports versatile display options and 32-bit 3D graphics engine. Triple independent display, enhanced display modes for widescreen flat panels for extend, twin, and clone display mode. Step 1 Insert the driver CD into your system's CD-ROM drive. You can see the driver folders items. Navigate to the Graphic Driver folder and click "setup.exe" to complete the installation. MILITARY RACK MOUNT PANEL PC 31

44 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 2 Click Next to install the driver. Step 3 Click Yes to agree with the license terms. 32 MILITARY RACK MOUNT PANEL PC

45 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 4 Click Next to install the driver. Step 5 Click Yes, I want to restart this computer now to finish installation. MILITARY RACK MOUNT PANEL PC 33

46 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.3 Audio Driver The ALC886 series are high-performance Channel High Definition Audio Codecs providing ten DAC channels that simultaneously support 7.1 sound playbacks, plus 2 channels of independent stereo sound output (multiple streaming) through the front panel stereo outputs. The series integrates two stereo ADCs that can support a stereo microphone, and feature Acoustic Echo Cancellation (AEC), Beam Forming (BF), and Noise Suppression (NS) technology. You must confirm which operating system is running on the IH32 Motherboard before installing the Audio drivers. Follow the steps below to complete the installation of the Realtek ALC886 Audio drivers. You will quickly complete the installation. Step 1 Insert the CD that comes with the motherboard. Open the folder Audio Driver and click on Audio (64bit_Vista_Win7_Win8_R271) to execute the setup. Step 2 Click Next to start the installation. 34 MILITARY RACK MOUNT PANEL PC

47 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 3 Click Yes, I want to restart my computer now to finish the installation. MILITARY RACK MOUNT PANEL PC 35

48 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.4 Ethernet Driver You must confirm which operating system is used on the IH32 Motherboard before installing the Ethernet drivers. Follow the steps below to complete the installation of the Intel I210IT Gigabit-LAN Controller + I218LM Gigabit-LAN drivers. You will quickly complete the installation. Step 1 Insert the driver CD and select the LAN Driver folder. 36 MILITARY RACK MOUNT PANEL PC

49 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 2 Extract the PROWinX64_19.0 file and click Next to install the driver. Step 3 Click Next to agree with the license terms. MILITARY RACK MOUNT PANEL PC 37

50 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 4 Click Next to install the driver. Step 5 Click Finish to complete the driver installation. 38 MILITARY RACK MOUNT PANEL PC

51 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.5 Intel Management Engine Software This installation program installs the Intel ME software components required for the platform on which you are installing, and installs only those components that match your platform s capabilities. Step 1 Insert the driver CD and select the Intel ME 10.0 folder and click Setup.exe. MILITARY RACK MOUNT PANEL PC 39

52 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 2 Click Next to continue the installation. Step 3 Click Yes to agree with the License terms. 40 MILITARY RACK MOUNT PANEL PC

53 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 4 Choose I accept the terms of the license agreement, and click Next to continue. Step 5 Click Finish to complete the software installation. MILITARY RACK MOUNT PANEL PC 41

54 USER MANUAL CHAPTER 5 DRIVER INSTALLATION 5.6 USB 3.0 Driver Installation (Windows 7) NOTE: If the operating system of your device is Windows 10 IoT, Windows Embedded 8.1 Industry, Windows Embedded 8 Standard, users can skip this installation. Step 1 Locate the hard drive directory where the driver files are stored with the browser or the explore feature of Windows*. Step 2 Double-click the Setup.exe from this directory. Step 3 Click Next to continue 42 MILITARY RACK MOUNT PANEL PC

55 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 4 Read the License Agreement and click Yes to proceed. Step 5 Review Readme File Information and click Next to proceed MILITARY RACK MOUNT PANEL PC 43

56 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 6 When the Setup Progress is complete click Next to proceed. 44 MILITARY RACK MOUNT PANEL PC

57 USER MANUAL CHAPTER 5 DRIVER INSTALLATION Step 7 Click Yes, I want to restart this computer now to finish and then restart your computer. MILITARY RACK MOUNT PANEL PC 45

58 USER MANUAL CHAPTER 6 BIOS SETUP BIOS SETUP BIOS Setup Utility is a program for configuration basic Input / Output system settings of the Panel PC for optimum use. This chapter provides information on how to use BIOS setup, its functions and menu. 46 MILITARY RACK MOUNT PANEL PC

59 USER MANUAL CHAPTER 6 BIOS SETUP CHAPTER 6: BIOS SETUP 6.1 How and When to Use BIOS Setup To enter the BIOS setup, you need to connect an external USB keyboard, press Del key when the prompt appears on the screen during start up. The prompt screen shows only few seconds so need press Del key quickly. IMPORTANT: Updated BIOS version may be published after the manual released. Check the latest version of BIOS on the website. You may need to run BIOS setup utility for reasons listed below: 1. Error message on screen indicates to check BIOS setup 2. Restoring the factory default settings. 3. Modifying the specific hardware specifications 4. Necessity to optimize specifications BIOS Navigation Keys The following keys are enabled during POST: Key Function Del Enters the BIOS setup menu. F7 Display the boot menu. Lists all bootable devices that are connected to the system. With cursor and cursor and by pressing <ENTER>, select the device used for the boot. Pause Pressing the [Pause] key stops the POST. Press any other key to resume the POST. The following Keys can be used after entering the BIOS Setup. Key Function F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit Esc Exit +/- Change Opt. Enter Select or execute command Cursor Moves to the previous item Cursor Goes to the next item Cursor Moves to the previous item Cursor Goes to the next item NOTE: You can press the F1, F2, F3, F4, /+, and Esc keys by connecting a USB keyboard to your computer. MILITARY RACK MOUNT PANEL PC 47

60 USER MANUAL CHAPTER 6 BIOS SETUP 6.2 BIOS Functions The IH32 motherboard has AMI BIOS built-in and a CMOS SETUP utility that allow users to configure required settings or to activate certain system features. The follwoing sections describe the configuration options found in the menu items Main Menu The Main menu displays the basic information about yoursystem including BIOS version, processor RC version, system language, time, and date. When you enter BIOS setup, the first menu that appears on the screen is the main menu.it contains the system information including BIOS version, processor RC version, system language, time, and date. BIOS Setting Description Setting Option Effect System Language Displays the system Adjustment of the Set the language in language. [English] language other language. is set up by default. The language in this device is English. System Date/Time This is current date Date and time Set the date in the setting. The time is maintained by the battery when the device is turned off. changes. format [mm/dd/yyyy]; The time in the format: Access Level The current user access settings Changes to the level of access [hh/mm/ss] Administrator is set up by the default 48 MILITARY RACK MOUNT PANEL PC

61 USER MANUAL CHAPTER 6 BIOS SETUP Advanced Settings Select the Advanced Tab from the IH32 setup menu to enter the advanced BIOS setup screen. You can select any of the items on the left frame of the screen to go to the sub menu for the item, such as CPU Configuration. You can use the <Arrow> keys enter all advanced BIOS setup options. The advanced BIOS setup menu is shown below. The submenus described on the following pages. CAUTION Handle advanced BIOS settings page with caution. Any changes can affect the operation of your computer. MILITARY RACK MOUNT PANEL PC 49

62 USER MANUAL CHAPTER 6 BIOS SETUP BIOS Setting Description Setting Option Effect ACPI Settings Configures ACPI Enter Opens submenu settings RTC Wake Settings Configures RTC Wake parameters Enter Opens submenu Trusted Computing CPU Configuration SATA Configuration Intel Rapid Start Technology PCH-FW Configuration USB Configuration F81866 H/W Monitor F81866 Super I/O Configuration Intel Ethernet Connection Intel I211 Gigabit Network Connection Configures Trusted Computing parameters Configures CPU settings Configures SATA parameters Configures Intel Rapid Start Technology parameters Configures PCH-FW parameters Configures USB parameters Configures H/W Monitor settings Configures Super I/O settings Configures Intel Ethernet Connection settings Configures Intel I211 Gigabit Network Connection settings Enter Enter Enter Enter Enter Enter Enter Enter Enter Enter For items marked press <Enter> for more options. Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu Opens submenu 50 MILITARY RACK MOUNT PANEL PC

63 USER MANUAL CHAPTER 6 BIOS SETUP ACPI Settings BIOS Setting Description Setting Option Effect Enable ACPI Auto BIOS ACPI Auto Enable/ Disable Enables or Configuration Configuration Disables this Enable Hibernation Control hibernation Enable/ Disable function Enables or Disables this function MILITARY RACK MOUNT PANEL PC 51

64 USER MANUAL CHAPTER 6 BIOS SETUP RTC Wake BIOS Setting Description Setting Option Effect Wake system with System awake on Enabled/ System will awake Fixed Time alarm events. Disabled at the hr: min: sec Wake system with Dynamic Time Wake System from S5 S set the system to wake on the current time + increase minute (s). Enables or disables system wake on alarm event. It allows you to wake up the system in a certain time. Enabled/ Disabled Enabled/ Disabled specified System will awake at current time+ increase minute (s). System will awake at the hr: min: sec specified 52 MILITARY RACK MOUNT PANEL PC

65 USER MANUAL CHAPTER 6 BIOS SETUP Trusted Computing BIOS Setting Description Setting Option Effect Security Device Enable or disable Enabled/Disabled Set desirable Support BIOS support for configuration TPM State security device Enable or disable TPM state. Enabled/Disabled Set desirable configuration MILITARY RACK MOUNT PANEL PC 53

66 USER MANUAL CHAPTER 6 BIOS SETUP CPU Configuration CPU Configuration allows you to change CPU settings. Use key arrows to navigate through the menu. 54 MILITARY RACK MOUNT PANEL PC

67 USER MANUAL CHAPTER 6 BIOS SETUP SATA Configuration BIOS Setting Description Setting Option Effect SATA Controller (s) Allows users to enable or disable the SATA controller (s) Enabled/ Disabled SATA Mode Selection SATA Controller Speed Serial ATA Port 0/1/2 Allows users to select mode of SATA controller (s) Allows users to select mode of SATA Controller Speed Allows users to enable or disable the SATA Port Enabled/ Disabled Enabled/ Disabled Enabled/ Disabled Set desirable configuration Set desirable configuration Set desirable configuration Set desirable configuration MILITARY RACK MOUNT PANEL PC 55

68 USER MANUAL CHAPTER 6 BIOS SETUP Intel Rapid Start Technology Allows users to enable or disable Intel rapid start technology PCH (FW) Configuration 56 MILITARY RACK MOUNT PANEL PC

69 USER MANUAL CHAPTER 6 BIOS SETUP USB Configuration MILITARY RACK MOUNT PANEL PC 57

70 USER MANUAL CHAPTER 6 BIOS SETUP BIOS Setting Description Setting Option Effect Legacy USB Support User can enable or disable USB port. Disabled Will keep USB devices available only for EFI applications. Enabled Enable all the USB XHCI Hand off This is a workaround for OSs without XHCI hand off support. Disabled Enabled devices Disables this function Enables this function EHCI Hand off USB Mass Storage Driver Support USB Transfer time out Device Reset time out Device power up delay Mass Storage Device This is a workaround for OSs without ECHI hand off support. User can Enable or disable USB mass storage driver support. The time out value for control, bulk, and interrupt transfers. USB mass storage device start unit command timeout. Maximum time the device will take before it properly reports itself to the host controller. Mass storage device emulation type. Disabled Enabled Disabled Enabled 1 Sec 5 Sec 10 Sec 20 Sec 10 Sec 20 Sec 30 Sec 40 Sec Auto [AUTO] enumerates devices less than 530MB as floppies. Forced FDD option can be used to force HDD formatted drive to boot as FDD Disables this function Enables this function Disables this function Enables this function Depends on the time out value Depends on the time out value Uses default value: for a root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor Configure mass storage device emulation type 58 MILITARY RACK MOUNT PANEL PC

71 USER MANUAL CHAPTER 6 BIOS SETUP F81866 H/W Monitor BIOS Setting Description Setting Option Effect Smart Fan Function Set parameters of smart fan function Enabled/ Disabled Enable or disable this function Smart Fan Mode Configuration Configure smart fan mode settings MILITARY RACK MOUNT PANEL PC 59

72 USER MANUAL CHAPTER 6 BIOS SETUP F81866 Super IO Configuration BIOS Setting Description Setting Option Effect Setting Serial Port Enable/Disable Parameters User can Enable/Disable the serial port and select optimal settings for the Super IO Device. Super IO Watch Dog Timer Setting Default: Enable Enable or Disable Serial Port (COM). The watchdog timer circuit has to be triggered within a specified time by the application software. If the watchdog is not triggered because proper software execution fails or a hardware malfunction occurs, it will reset the system. 60 MILITARY RACK MOUNT PANEL PC

73 USER MANUAL CHAPTER 6 BIOS SETUP Pin 3~ Pin 10 Control Settings. MILITARY RACK MOUNT PANEL PC 61

74 USER MANUAL CHAPTER 6 BIOS SETUP Serial Port RS232/RS422/RS485 Settings BIOS Setting Description Setting Option Effect Serial Port Select Serial Port RS232 / RS422 RS485 (Rx)/ RS485(Tx) Change Settings UART Mode Allow Change Serial Port Settings [AUTO] Choose Serial Port Settings Show which serial port is used 62 MILITARY RACK MOUNT PANEL PC

75 USER MANUAL CHAPTER 6 BIOS SETUP Chipset Menu MILITARY RACK MOUNT PANEL PC 63

76 USER MANUAL CHAPTER 6 BIOS SETUP PCH- IO Configuration BIOS Setting Description Setting Option Effect PCI Express Detail of PCI Set desirable N/A Configuration Express items. parameters Details of USB Set desirable USB Configuration N/A items parameters Enables or PCH LAN Enabled/ Set desirable disables the controller Disabled parameters LAN1/2 controller. Wake On LAN SLP_S4 Assertion Width Restore AC Power Loss Enables or disables LAN1/2 wake up from sleep state. Sets a minimum assertion width for the SLP_S4# signal This item allows users to select off, on and last state. Enabled/ Disabled [4-5 seconds] Power on/ Power off Set desirable parameters Set desirable parameters Set desirable parameters 64 MILITARY RACK MOUNT PANEL PC

77 USER MANUAL CHAPTER 6 BIOS SETUP PCI Express Configuration BIOS Setting Description Setting Option Effect DMI Link ASPM Enabled/ Control Disabled DMI Link Extended Synch Control PCIe- USB Glitch W/A Allows users to enable or disable the DMI Link ASPM Control Allows users to configure Mini PCI Express setting For bad USB devices connected behind PCIE/PEG port Enabled/ Disabled Enabled/ Disabled Set desirable parameters Set desirable parameters Set desirable parameters MILITARY RACK MOUNT PANEL PC 65

78 USER MANUAL CHAPTER 6 BIOS SETUP USB Configuration BIOS Setting Description Setting Option Effect USB Precondition Allows user to enable or disable USB precondition Enabled/ Disabled XHCI Mode USB Ports Per-Port Disable Control Allows user to enable or disable XHCI mode. Control each of the USB ports (0~13) disabling [Smart Auto] Enabled/ Disabled Set desirable parameters Set desirable parameters Set desirable parameters 66 MILITARY RACK MOUNT PANEL PC

79 USER MANUAL CHAPTER 6 BIOS SETUP System Agent (SA) Configuration Allows users to enable or disable VT-d. MILITARY RACK MOUNT PANEL PC 67

80 USER MANUAL CHAPTER 6 BIOS SETUP Graphics Configuration BIOS Setting Graphics Turbo IMON Current Internal Graphics Aperture Size DVMT Pre-Allocated DVMT Total Gfx Mem Gfx Low Power Mode Panel Power Enable Description Allows users to select which Graphics Turbo IMON Current Allows users to enable or disable IGD This item allows users to select aperture size Allows users to select DVMT preallocated memory size Allows users to select DVMT total memory size Allows users to enable or disable IGD low power mode Allows users to enable or disable Panel Power 68 MILITARY RACK MOUNT PANEL PC

81 USER MANUAL CHAPTER 6 BIOS SETUP Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS use to look for a boot device from which to load the operating system. BIOS Setting Description Setting Option Effect Setup Prompt Enter Timeout Boot NumLock State Quite Boot Allows user to configure the number of seconds to stay in BIOS setup prompt screen. Enables or disables NumLock feature on the numeric keypad of the keyboard after the POST (Default: On). Determines if POST message or OEM logo is displayed. On Off Disabled Enabled Set the prompt timeout Remains On Remains OFF Disables this function Enables this function MILITARY RACK MOUNT PANEL PC 69

82 USER MANUAL CHAPTER 6 BIOS SETUP Fast Boot Boot Option Priorities Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled). Specifies the overall boot order from the available devices Disabled Enabled Ex: Boot Option#1 (hard drive) Disables this function Enables this function Hard drive as the first priority Security Menu This section allows to configure and improve system, and set up some system features according to your preferences. BIOS Setting Description Setting Option Effect Administrator Displays whether Enter Enter password Password or not an administrator password has been set. User Password Display whether or not a user Password has been set. Enter Enter password 70 MILITARY RACK MOUNT PANEL PC

83 USER MANUAL CHAPTER 6 BIOS SETUP Save & Exit BIOS Setting Description Setting Option Effect Save Changes and Exit This saves the changes to the CMOS and exits the BIOS Setup Enter <YES> Save changes Discard Changes and Exi Save Changes and Reset Discard Changes and Reset program. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Reset the system after saving the changes. Reset system setup without saving any changes Enter <YES> Enter <NO> Enter <YES> Enter <NO> Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Saves the changes Return to the BIOS Setup Main Menu Saves the changes Return to the BIOS Setup Main Menu MILITARY RACK MOUNT PANEL PC 71

84 USER MANUAL CHAPTER 6 BIOS SETUP Save Changes Save changes done so far to any of the setup options. Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Discard Changes Discard changes done so far to any of the setup options. Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Restore Default Restore/load default values for all the setup options. Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Save as User Defaults Save the changes done so far as User defaults. Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Restore User Defaults Restore the User Defaults to all the setup options. Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu Boot Override Boot device selection can override your boot priority Enter <YES> Enter <NO> Saves the changes Return to the BIOS Setup Main Menu 72 MILITARY RACK MOUNT PANEL PC

85 USER MANUAL CHAPTER 6 BIOS SETUP 6.3 Using Recovery Wizard to Restore Computer IH32 motherboard has a dedicate recovery partition stored on the hard drive of the PC to enable quick one-key recovery process. This partition occupies about 11GB of the storage space, and comes built-in to each IH32 series PC. IMPORTANT: Before starting the recovery process, be sure to backup all user data, as all data will be lost after the recovery process. Follow the procedure below to enable quick one-key recovery procedure: Plug-in the AC adapter to the Panel PC. Make sure the computer stays plugged in to power source during the recovery process Turn on the computer, and when the boot screen shows up, press the F6 to initiate the Recovery Wizard The following screen shows the Recovery Wizard. Click on Recovery button to continue. A warning message about data loss will show up. Make sure the data is backed up before recovery, and click Yes to continue. Wait the recovery process to complete. During the recovery process, a command prompt will show up to indicate the percent of recovery process complete. The computer will restart automatically after recovery completed. MILITARY RACK MOUNT PANEL PC 73

86 USER MANUAL CHAPTER 6 BIOS SETUP 74 MILITARY RACK MOUNT PANEL PC