PRODUCT DATA SHEET. ColorBright Color Changing. RGB 150 Series. Year Warranty.

Transcription

1 PRODUCT DATA SHEET ColorBright Color Changing RGB 150 Series 5 Year Warranty

2 Weatherproof Color Changing RGB 150 Series Product Datasheet Description The Outdoor ColorBright Color Changing 150 LED strip light is a reel of linear color changing LED chips mounted on a flexible strip of printed circuit board (PCB) with a strong adhesive backing. To achieve weather protection, the strips are enveloped in a silicone plastic casing. Sometimes referred to as "color changing LED tape lights," the flexible design of LED strips means the lights can be installed in basically any space you can imagine. With these strips you can change the lights to nearly any color combination for a wide range of creative options. These lights work perfectly for outdoor installations as well as indoor spaces such as aquariums or in bathrooms that may be exposed to water. The IP65 rating means that the LED strip lights are able to withstand jets and splashes of water from all sides. It cannot be submerged in water, but it will withstand the elements. We also recommend outdoor lights for use indoors in high splash areas or if you're looking for a strip that is easier to clean. Product Features Highest Brightness RGB LED Chips Fully dimmable and color controllable Highest quality components and premium packaged 5050 LEDs Single BIN LED selection to ensure color consistency (3-Step MacAdam) 3M 9731 adhesive for a strong bond to the weatherproof silicone sleeve 120 Beam Angle Short LED pitch of 1 1/4" (33mm) 12V or 24V DC Input Options Segment length of 4" (6 1/2" for 24V) Can be cut every 3 LEDs (5 LEDs for 24V) 9 LEDs / Foot (30 / Meter) Thick double layer 2 oz copper PCB for excellent thermal management Operating Temperature -4 F to +104 F (-20 C to 40 C) IP65 Rated with non-yellowing and UV resistant silicone sleeve Only 1/2" (12mm) strip width Product Specific Specifications Product LED Chips per foot (Meter) Voltage Input Watts / foot (Meter) Lumen / foot (Meter) Color Wavelengths (Nanometer) Max. Run Length in Series R: 11LM (35/m) 9 LEDs/Foot R: nm IP65-CB-RGB-12V 12V DC 2.2 W/ft (7.2 W/m) G: 46LM (150/m) G: nm 32' 10" (10 meters) (30/Meter) B: 10LM (30/m) B: nm IP65-CB-RGB-24V 9 LEDs/Foot (30/Meter) 24V DC 2.2 W/ft (7.2 W/m) R: 11LM (35/m) G: 46LM (150/m) B: 10LM (30/m) R: nm G: nm B: nm 48' (15 meters) page1

3 Weatherproof Color Changing RGB 150 Series Product Datasheet Ordering Code OUTDOOR IP Protection Brand Color Voltage Length IP65 - Weatherproof CB - ColorBright RGB 12V 08 FT - 8 ft Reel IP68 - Waterproof 24V 16 FT - 16 ft Reel Dimensions m (Reel) 12V 4 100mm 1 / 2 12mm 1 1 / 4 33mm 3/ 16 4mm m (Reel) 24V 1 6 / 2 165mm 1 / 2 12mm 1 1 / 4 33mm 3/ 16 4mm page2

4 Example Installation and Layout Weatherproof Color Changing RGB 150 Series Product Datasheet IN SERIES Outlet ( or source) LED Strip Transformer RGB Controller IN PARALLEL Outlet ( or source) LED Strips Transformer RGB Controller page3

5 RF WIRELESS REMOTE CONTROL MODEL: M4-5A POWER INPUT: DC5V-DC24V OUTPUT: 5Ax4CH MAX:20A 8mm wire preparation 1-2.5º / AWG V V W W W W B G BLUE AUTO GREEN CYAN B/S RED PURPLE FLASH B/S FADE3 FLASH7 JUMP3 FADE7 I I I I JUMP Weatherproof Color Changing RGB 150 Series Product Datasheet Dimming Options In-Line Dimming I RF WIRELESS RF YELLOW Receiver* Mean Well Power Supply DC ADRESS SETTING POWER DC DC LED CONTROLLER OUTPUT NW WW NC WW R V * The receiver and controller may differ from the one shown. page4

6 Included Accessories Weatherproof Color Changing RGB 150 Series Product Datasheet x1 x1 x5 x20 x2 x2 Weatherproof C1 Connector (Female) Weatherproof C1 Connector (Male) C1 Connector Mounting Bracket Width - 6 mm Length - 28 mm End Cap Width - 14 mm Height - 6 mm End Cap (with 4 holes for lead wires) Width - 14 mm Height - 6 mm Resealing Outdoor Strips Sealing Outdoor Strips with End Caps Find the cut line on the strip (between the solder pads). Carefully cut the strip on the cut line. Fill an end cap (without holes) with sealant and slide it over the end of the strip until it fits snugly. Sealing Outdoor Strips with End Caps and a Solderless Connector Cut away a small portion of the silicone sleeve to access the solder pads you will be connecting to. Carefully insert the strip into the connector and ensure it fits snugly. Spread the wires on the connetor and slide them through the holes in the connector. Fill the end cap (with holes) with sealant and slide carefully over the connector at the end of the strip. Use any additional silicone sealant required to complete the seal around the connector and the end of the LED strip. page5

7 Weatherproof Color Changing RGB 150 Series Product Datasheet Compatible Drivers (12V only) Wall Mounted Power Supply / Desktop Power Supply Power Supply DC 1-4 ft 12V-WMPS ft 12V-DPS ft 12V-DPS ft 12V-DPS ft 12V-DPS-8 Mean Well DC 1-8 ft 9-15 ft ft ft LPV HLG-40H-12A HLG-80H-12A LPV ft ft HLG-320H-12A HLG-600H-12A DC ft ft ft HLG-120H-12A HLG-150H-12A HLG-240H-12A page6

8 Weatherproof Color Changing RGB 150 Series Product Datasheet Compatible Drivers (24V only) Wall Mounted Power Supply / Desktop Power Supply Power Supply DC 1-9 ft 9-22 ft ft ft 24V-WMPS-1 24V-DPS V-DPS-4 24V-DPS-5 Mean Well DC 1-8 ft 8-13 ft 9-15 ft ft LPV LPV HLG-40H-24A HLG-60H-24A ft ft HLG-320H-24A HLG-600H-24A DC ft ft ft ft HLG-100H-24A HLG-120H-24A HLG-185H-24A HLG-240H-24A page7

9 Compatible Aluminum Extrusions Weatherproof Color Changing RGB 150 Series Product Datasheet KLUS GIP Anodized Extrusion Covers - G-L Frosted Cover (: KL m) End Caps - GIP - L End Cap without Wire Hole (: KL-00306) Mounting Accessories (: KL-B4574ANODA-1m) - GP Surface Spring (: KL-00293) minimum surface thickness 10mm (3/8") - Mounting Bracket (: KL-24143) GIZA Anodized Extrusion Covers - HS 22 Clear Cover (: KL m) - HS 22 Frosted Cover (: KL m) End Caps - GIZA End Cap without Wire Hole (: KL-24007) NOTE: Fits Without IP65 End Caps Mounting Accessories (: KL-B5556ANODA-1m) - GP Surface Spring (: KL-00293) minimum surface thickness 10mm (3/8") - Mounting Bracket (: KL-24143) page8

10 Safety And Disclosures Weatherproof Color Changing RGB 150 Series Product Datasheet 1. Installation must be in accordance with local and national electrical code regulations. 2. To ensure safety and correct installation, our strips are intended to be installed by a qualified, licensed electrician. 3. Only install with a Class 2 DC Constant Voltage LED driver to meet UL requirements. 4. Do not install in environment where excessive heat may occur. 5. LED strip lights must be handled with care. Excessive handling, bending, and pressure may damage the product, voiding the warranty. 6. Do not install indoor LED tape light products in outdoor / wet location environments. Only use copper wiring. Use wires rated for at least 176 F (80 C) and certified for use with external connection of electrical equipment. 7. Each maximum run requires a dedicated power feed from the driver. Do not extend beyond the recommended maximum run length. 8. Make sure the appropriate gauge wire is installed between driver, LEDs, and any dimmers. When choosing wire, calculate voltage drop, maximum amperage rating, and the location ratings on the wire. Improper wire selection and installation could overheat wires, and cause fire. 9. Do not modify product beyond instructions or warranty will be void. 10. We reserve the right to modify and improve the design of our fixtures without prior notice. Although we try our best to order the same colors every time, due to changes in technology and phosphors over time, we cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output. Warranty Information This product has a 5-year limited warranty that starts from the date of shipment. Products must be installed as instructed for warranty to be valid. This warranty does not include the additional accessories referenced in this data sheet. Complete warranty details for fixtures and additional accessories are available at within the Policies section. For warranty related questions please contact our support team (support@flexfireleds.com). page9