.050" IDC Connectors for.025" Ribbon Cable - M73 Series
|
|
- Dayna Anthony
- 6 years ago
- Views:
Transcription
1 .050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single layer.025" Flat Cable 03 =.050" Paddleboard Connector for single layer.025" Flat Cable NUMER OF POSITIONS STYLE 01 = 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 STYLE 02 = 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 STYLE 03 = 10, 20, 30, 40, 50, 60, 68, 70, 72, 80, 90, 100 R = Receptacle H = Pins PLTING S = 5 µin overall gold nominal T = Selective gold flash 0 = 200 µin bright tin SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Contacts: Phosphor bronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 1000 MΩ 1000 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 1000 VC min RMS (sea level) Mechanical: Contact Insertion force: 5 ozs. per circuit max Contact Withdrawal force: 1.5 ozs. per circuit min Recommended wire size: 28 WG, stranded Cable Retention: 22 lbs. min axial force per cable inch Mating durability: 500 cycles min Environmental: Operating temperature: -65 C to +125 C PCKGING: nti-static plastic trays available MTING OPTIONS: M63X-HXXX-XX-01 (.050" Center Shrouded & Unshrouded Headers)
2 .050" IDC Connectors for.025" Ribbon Cable - M73 Series M73X-RXXX-01 IDC SOCKET FOR SINGLE LYER.025 FLT CLE Dimension POSITION C (11.43) (18.55) (16.35) (15.24) (22.36) (20.16) (19.05) (26.17) (23.97) (20.32) (27.44) (25.24) (24.13) (31.25) (29.05) (30.48) (37.60) (35.40) (31.75) (38.87) (36.67) (36.83) (43.95) (41.75) (41.91) (49.03) (46.83) (49.53) (56.65) (62.23) (69.35) (54.45) (67.15)
3 .050" IDC Connectors for.025" Ribbon Cable - M73 Series M73X-HXXX-03 - FOUR ROW PDDLEORD CONNECTOR -.025" FLT CLE PC oard Layout *This series uses one layer of.025" Centerline Flat Cable for a lightweight, low profile, one-step, one-operation termination. M73X-RXXX-02 - DUL ROW IDC SOCKET -.025" FLT CLE *This series uses one layer of.025" Centerline Flat Cable for a lightweight, low profile, one-step, one-operation termination. M73X-RXXX-02 Series Dimensional: POSITION C (43.18) (39.18) (36.83) (48.26) (44.26) (41.91) (50.80) (55.88) (46.80) (51.88) (44.45) (49.53) M73X-HXXX-03 Series Dimensional: POSITION C ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( )
4 2.00mm IDC Socket for 1.00mm Ribbon Cable.079" x.079" (2.00 x 2.00) Centerline - M74 Series PRT NUMER LEGEND M74X-RXX-XX 01 = 2.00mm Flat Cable IDC Socket NUMER OF POSITIONS 20, 22, 24, 26, 34, 36, 40, 44, 50, 60, 68 PLTING T = Selective gold flash 8 = 30 µin gold nominal SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 1000 MΩ 750 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 750 VC min RMS (sea level) Mechanical: Contact insertion force: 300 grams per contact max Contact withdrawal force: 20 grams per contact min Cable retention: 24 lbs min axial force per cable inch Mating durability: 750 cycles min Environmental: Operating temperature: -65 C to +125 C MTING OPTIONS: Headers: M64X-H2XX-XX-01 (2.0mm centerline shrouded and unshrouded headers) PCKGING: nti-static plastic trays or tubes available PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E Dimensional: Unit: Inch / mm CONTCTS (22.60) (24.60) (26.60) (28.60) (18.00) (20.00) (22.00) (24.00) (36.60) (32.00) (38.60) (34.00) (42.60) (38.00) (46.60) (52.60) (62.60) (70.60) (42.00) (48.00) (58.00) (66.00)
5 .100" IDC Socket for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) Centerline - M75 Series PRT NUMER LEGEND M75X-RXX-XX POLRIZTION 0 = With center polarization bump 1 = No polarization bump CONTCT STYLE/INSULTOR COLOR 1 = Single wipe, black 2 = Single wipe, gray 3 = Dual wipe, black 4 = Dual wipe, gray POSITIONS 06, 08, 10, 12, 14, 16, 20, 24, 26, 30, 34, 40, 44, 50, 56, 60, 62, 64 PLTING T = Selective gold flash 8 = 30 µin gold nominal SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Optional color: Gray Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 5000 MΩ 1000 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 1000 VC min RMS (sea level) Mechanical: Contact Insertion force FCS-D: 8 ozs. per circuit max Contact Withdrawal force FCS-D: 1.5 ozs. per circuit min Recommended wire size: 28 WG, stranded Cable Retention: 28 lbs. min axial force per cable inch Mating durability: 750 cycles min Environmental: Operating temperature: -65 C to +125 C CCESSORIES: Plastic strain relief, polarizing keys, pull tabs STRIN RELIEF: M750-SRXX-XX PULL TS: M750-PTXX KEYING PLUGS: Consult factory COLOR 1 = LCK 2 = GRY CONTCT STYLE 1 = SINGLE WIPE 2 = DUL WIPE NO. OF POSITIONS NO. OF POSITIONS MTING OPTIONS: Headers: M65X-H2XX-XX-01 (.100" Shrouded, Unshrouded and Shrouded/Latching Headers) PCKGING: nti-static plastic trays available PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E and certified by Canadian Standards ssociation No. LR75112
6 .100" IDC Socket for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) Centerline - M75 Series M75X-RXX-11 - SINGLE WIPE CONTCTS M75X-RXX-30 - DUL WIPE CONTCTS Unit: Inch / mm POLES (5.08) (12.19) (7.62) (14.73) (10.16) (17.27) (12.70) (19.81) (15.24) (22.35) (17.78) (24.89) (22.86) (29.97) (27.94) (35.05) (30.48) (37.59) (35.56) (42.67) (40.64) (47.75) (48.26) (55.37) (53.34) (60.45) (48.26) (68.07) (68.58) (75.69) (73.66) (80.77) (76.20) (83.31) (78.74) (85.85)
7 .100" IDC Card Edge for.050" Ribbon Cable.100" (2.54) Centerline - M75 Series PRT NUMER LEGEND M75X-CEXX-XX ODY STYLE/COVER 01 = Standard, black 02 = With mounting ears, black 11 = Standard, gray 12 = With mounting ears, gray POSITIONS 10, 12, 14, 16, 20, 26, 34, 40, 50, 60, 62, 64 PLTING T = Selective gold flash 8 = 30 µin gold nominal STRIN RELIEF: M750-CRXX-XX COLOR 1 = black 2 = Gray NO. OF POSITIONS KEYING PLUGS: Consult factory SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Optional color: Gray Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 5000 MΩ 1000 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 1000 VC min RMS (sea level) Mechanical: Insertion force to PC board: 6.5 oz. max per contact pair when mated with.062" PC board Withdrawal force: 5 oz. min per contact pair when mated with.062" PC board Mating durability: 500 cycles min Recommended wire size: 28 WG stranded Environmental: Operating temperature: -65 C to +125 C OPTIONS: (dd to the end of part number) GY = Gray color insulator MTING OPTIONS: Mates with PC boards with thickness of.058" -.070" CCESSORIES: Plastic strain relief, keying plugs PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E and Certified by Canadian Standards ssociation No. LR75112
8 .100" IDC Card Edge for.050" Ribbon Cable.100" (2.54) Centerline - M75 Series Unit: Inch / mm No. of Positions C (10.16) (15.34) (22.15) (15.24) (20.42) (27.23) (17.78) (22.96) (29.77) (22.86) (28.04) (34.85) (30.48) (35.66) (42.47) (40.64) (45.82) (52.63) (48.26) (53.44) (60.25) (60.96) (66.14) (72.95) (73.66) (78.84) (85.65) (76.2) (81.38) (88.19) (78.74) (83.92) (90.73) Recommended Solder Pad Layout pplication Diagram
9 .100" IDC Card Edge for.050" Ribbon Cable.100" (2.54) Centerline - M75 Series PRT NUMER LEGEND M75X-PXX-XX ODY STYLE/COLOR 01 = Standard, black 02 = With mounting ears, black 11 = Standard, gray 12 = With mounting ears, gray POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 PLTING T = Selective gold flash 8 = 30 µin gold nominal SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: Gray Optional color: lack Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 5000 MΩ 750 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 750 VC min RMS (sea level) Mechanical: Insertion force: 8 ozs. per circuit max Withdrawal force: 1.5 ozs. per circuit min Recommended wire size: 28 WG stranded Mating durability: 750 cycles min Environmental: Operating temperature: -65 C to +125 C MTING OPTIONS: M75X-RXX-XX (.100" x.100" IDC Socket) PCKGING: nti-static plastic trays available PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E and Certified by Canadian Standards ssociation No. LR75112
10 .100" IDC Male Connector for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) Centerline - M75 Series Optional Mounting Ears *vailable with or without mounting ears. Unit: Inch / mm Dimensional: CONTCTS C D E (10.16).710 (18.03).900 (22.86) (30.48) (38.10) (15.24).910 (23.11) (27.94) (35.56) (43.18) (17.78) (25.65) (30.48) (38.10) (45.72) (22.86) (30.73) (35.56) (43.18) (50.80) (27.94) (35.81) (40.64) (48.26) (55.88) (30.48) (38.35) (43.18) (50.80) (58.42) (35..56) (43.43) (48.26) (55.88) (63.50) (40.64) (48.51) (53.34) (60.96) (68.58) (48.26) (56.13) (60.96) (68.58) (76.20) (60.96) (68.83) (73.66) (81.28) (88.90) (73.66) (81.53) (86.36) (93.98) (101.60) (78.74) (86.61) (91.44) (99.06) (106.68)
11 .100" IDC Shrouded Header with Latches for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) M75 Series PRT NUMER LEGEND M75X-PXX-XX LTCHES/ODY STYLE 13 = Short latch 14 = Long latch 15 = Short latch with mounting ears 16 = Long latch with mounting ears POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 PLTING T = Selective gold flash 8 = 30 µin gold nominal SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: Gray Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 5000 MΩ 750 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 750 VC min RMS (sea level) Mechanical: Insertion force: 8 ozs. per circuit max Withdrawal force: 1.5 ozs. per circuit min Recommended wire size: 28 WG stranded Mating durability: 750 cycles min Environmental: Operating temperature: -65 C to +125 C MTING OPTIONS: M75X-RXX-XX (.100" x.100" IDC Socket) PCKGING: nti-static plastic trays available
12 .100" IDC Shrouded Header with Latches for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) M75 Series HEDER WITHOUT MOUNTING ERS HEDER WITH MOUNTING ERS Dimensional: Unit: Inch / mm POSITION C (32.00) (21.84) (10.16) (37.08) (26.92) (15.24) (39.62) (29.46) (17.78) (44.70) (35.54) (22.86) (49.78) (39.62) (27.94) (52.32) (42.16) (30.48) (57.40) (47.24) (35.56) (62.48) (52.32) (40.64) (70.10) (59.94) (48.26) (82.80) (72.64) (60.96) (95.50) (85.34) (73.66) (100.58) (90.42) (78.74)
13 .100" IDC Transition Plug for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) Centerline - M75 Series PRT NUMER LEGEND M75X-HXX-XX COLOR 01 = black 11 = gray POSITIONS 08, 10, 14, 16, 20, 24, 28, 30, 34, 40, 50, 60, 64 PLTING T = Selective gold flash E = 100 µin bright tin/lead 8 = 30 µin gold nominal OPTIONS: Low profile - consult factory SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Optional color: Gray Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: VDC min between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 1000 VC min RMS (sea level) Mechanical: Recommended wire size: 28 WG stranded Environmental: Operating temperature: -65 C to +125 C MTING OPTIONS: ttaches directly to PC board or into.100" x.100" compatible socket PCKGING: nti-static plastic trays available PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E and Certified by Canadian Standards ssociation No. LR75112
14 .100" IDC Transition Plug for.050" Ribbon Cable.100" x.100" (2.54 x 2.54) Centerline - M75 Series PC oard Layout Unit: Inch / mm Contacts (14.35).300 ( 7.62).665 (16.89).400 (10.16).865 (21.97).600 (15.24).965 (24.51).700 (17.78) (29.59).900 (22.86) (34.67) (27.94) (37.21) (30.48) (39.75) (33.02) (42.29) (35.56) (47.37) (40.64) (54.99) (48.26) (67.69) (60.96) (80.39) (73.66) (85.47) (78.74)
15 IDC Dip Plug for.050" Ribbon Cable - M75 Series.100" x.300" (2.54 x 7.62) /.100" x.600" (2.54 x 15.24) PRT NUMER LEGEND M75X-HXX-XX STYLE 03 = Dip, black 04 = 4 row transition plug, black 13 = Dip, gray 14 = 4 row transition plug, gray POSITIONS Styles -03 & -13 (08, 10, 14, 16, 18, 20, 24, 28, 32, 40).100" x.300" Dip (08-20).100" x.600" Dip (24-40) Styles -04 & -14 (10, 14, 16, 20, 26, 34, 40, 50, 60) PLTING E = 100 µin tin/lead T = Selective gold flash 8 = 30 µin gold nominal SPECIFICTIONS: Material: Insulator: Polybutylene Terephthalate (PT), glass reinforced thermoplastic, rated UL 94V-0 Insulator color: lack Optional color: Gray Contacts: Phosphor ronze Electrical: Operation voltage: 250 VC max Current rating: 1 mp max Contact resistance: 20 mω max Insulation resistance: 5000 MΩ 1000 VDC between adjacent contacts (75 F and 50% R.H.) Dielectric withstanding voltage: 1000 VC min RMS (sea level) Environmental: Operating temperature: -65 C to +125 C MTING OPTIONS: Mates with Methode M43 Series Dip Sockets or directly to PC board PCKGING: nti-static plastic trays available PPROVLS ND CERTIFICTIONS: Select parts recognized under the component program of Underwriters Laboratories, Inc. No. E and Certified by Canadian Standards ssociation No. LR75112
16 .100" IDC Dip Plug for.050" Ribbon Cable - M75 Series.100" x.300" (2.54 x 7.62) /.100" x.600" (2.54 x 15.24).100" x.300" POSITIONS 8-20 Dimensional: Unit: Inch / mm CONTCTS (14.35).665 (16.89).865 (21.97).965 (24.51).300 ( 7.62).400 (10.16).600 (15.24).700 (17.78) (27.05) (29.59) (34.67).800 (20.32).900 (22.86) (27.94) (39.75) (33.02) (44.83) (54.99) (38.10) (48.26).100" x.600" POSITIONS PC oard Layout Positions 8 thru 20 PC oard Layout Positions 24 thru 40
17 IDC Dip Plug for.050" Ribbon Cable Four Row Transition Plug - M75 Series PC oard Layout Unit: Inch / mm Dimensional: POSITIONS POSITIONS (17.50).450 (11.43) (47.98) (41.91) (22.58).650 (16.51) (55.60) (49.53) (25.12).750 (19.05) (68.30) (62.23) (30.20).950 (24.13) (81.00) (74.93) (37.28) (31.75)
18 Ribbon Cable ssembly Tooling for IDC and IDC D-Sub Products Production Tools HCT - 01 Hand Crimper is an inexpensive yet highly reliable precision tool which easily terminates IDC D-Subs, Sockets and Card Edge Connectors on the production line or field. It features the same parallel action as our table top assembly press in a portable hand version. TTP - 01 Mechanical ssembly Press is an adjustable parallel-action bench top tool designed for proper displacment of cable and exact cap orientation when terminating all Methode IDC Connectors.
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationAMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationCatalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions
Catalog 82012 Revised 10-09 Ribbon Cable Interconnect Solutions onents.com Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Mates to.050"
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More informationHD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationSYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS
SYSTEM TELEPHONE JKS & MODULR PLUGS vilux Introduction System contains splice termination regular modular plugs, category 5 modular plugs and board mount and surface mount telephone jacks. The modular
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationStandard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationUSB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationMinitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
More informationMilli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationAMPMODU Headers and Receptacles,.100 [2.54] Centerline
MPMODU.02 [0.64] Square Interconnection System MPMODU Headers and Receptacles, enterline 6-146293-0 SR VT-RET 6-146281-0 SR VT 6-146490- DR Stacking Header 6-341-0 SR Top Entry 8760-1 ulkhead Header 6-34237-8
More informationCLINCHER FLEX CONNECTORS OVERVIEW TARGET MARKETS / APPLICATIONS FEATURES & BENEFITS
FLEX CONNECTORS CLINCHER Connector System for Flexible Circuitry (0.100in./ 2.54mm pitch) Maximum reliability; Low applied cost OVERVIEW The CLINCHER connector family includes single-row pin and receptacle
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More information3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More information3M Pak 100 Wiremount Plug Series
Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518
More informationELCO Memory Card Components
ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More information2.54mm (.100") Pitch Connectors
mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,
More informationAmphenol 97 Series Standard Cylindrical Connector
mphenol 97 Series Standard Cylindrical Connector 12-022-11 MIL-C-5015 Style mphenol This catalog covers the complete line of mphenol 97 Series Connectors. It is divided into five sections: 97E (Environmental),
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationSMS Series Quick Mating
Quick Mating panel and cable connectors escription The versatile and easy to use SMS Quick Mating panel and cable connectors are a highly cost-effective system approach to solving the constant demand for
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationF SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES K-1 F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More information3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
More informationTermination End. Figure 1
AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationConnectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2MM FB,ASY,048,SIG,HDR,EN,6.50
More informationD-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationTE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
More information