1 HP Ersatzteile für DesignJet 800

Transcription

1 HP Ersatzteile für DesignJet 800 Stand Assembly C C * C * Back platen assembly - Curved cover/guide that is installed below the paper drive roller (4-inches) Back platen assembly - Curved cover/guide that is installed below the paper drive roller (4-inches) Media sensor - Installed in the front of the rear platen Carriage, Trailing Cable, Belt, Encoder 4 * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

2 HP Ersatzteile für DesignJet C C C C C C C Printhead carriage assembly - Includes carriage, bushings, pen latches, carriage position sensor, and line sensor Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are.4m (4.7ft) long with 0 pin (M) edge connectors - For 4-inch models Carriage assembly trailing cable kit - Includes installation instructions, trailing cables, two mounting clips, and a ferrite - Cables are.4m (4.7ft) long with 0 pin (M) edge connectors - For 4-inch models Carriage belt (4-inch) - Carriage belt - Long belt attached to the carriage Carriage belt (4-inch) - Carriage belt - Long belt attached to the carriage Encoder strip (4-inch) - Connects from left to right side of printer Encoder strip (4-inch) - Connects from left to right side of printer Stand Assembly C C C Cutter assembly Cutter bushing Left cutter guide bracket and left encoder holder kit Drive Roller Encoder Sensor * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

3 HP Ersatzteile für DesignJet 800 C * C Cover kit for drive roller encoder sensor Drive roller encoder sensor - Installed on left end of paper drive roller Drive Roller and Transmission Gears C C C Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 4-inch model Paper drive roller kit - Includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (Axial) spring, lint free cloth, rubber glove, and instruction sheets - For 4-inch model Paper drive transmission gear kit - Includes two gears used to drive the paper drive roller - (Part of Drive Roller Kit) Electronics Module and Plugin Cards * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

4 4 HP Ersatzteile für DesignJet 800 C J0A J-6900 JA J-6900* JA JA J467A J J C87A C88A C C C Electronics module - Contains main logic board, connectors for plug-in cards, connector for parallel interface cable, connector for USB cable, and cooling fan Ethernet 0Base-T (RJ-45) EIO network internal print server PC board - Ethernet 0Base-T (RJ-45) EIO Network PCA JetDirect 600N EIO internal print server 0Base-T, 0BASE-, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector - (JA) - NOTE: EIO interface boards are NOT interchangeable with MIO boards Ethernet 0Base-T/0Base and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - Ethernet 0Base- T/0Base & LocalTalk (RJ-45, BNC, LocalTalk) EIO Network PCA JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector - JetDirect 600N EIO Internal Print Server (Token Ring) LAN Interface Board - Has One RJ-45 and DB-9 Connectors (JA) - NOTE: EIO Boards are NOT JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors JetDirect 600N internal print server (0Base-T and 00Base-TX) LAN interface board - Plugs into peripheral EIO slot JetDirect 60N token ring LAN interface board - DB-9 and RJ-45 connectors JetDirect 60n internal print server - 0BaseT and 00BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - (Part of J794A) JetDirect 65N internal print server LAN interface board - 0Base-T and 00Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector - 64MB SO-DIMM memory module - For DesignJet 500 or DesignJet Can be installed ONLY into the formatter board (the formatter board is optional for DesignJet 500/500PS and standard for DesignJet 800/800PS) 8MB SO-DIMM memory module - For DesignJet 500 or DesignJet Can be installed ONLY into the formatter board (the formatter board is optional for DesignJet 500/500PS and standard for DesignJet 800/800PS) 64MB SO-DIMM memory module - Can be installed ONLY into the formatter board 8MB SO-DIMM memory module - Can be installed ONLY into the formatter board Formatter PC board - Plugs into EIO card slot Front Platen C Front platen kit - Includes platens for both the 4-inch and the 4-inch models * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

5 5 HP Ersatzteile für DesignJet 800 Ink Tubes and Ink Supply Station C C C Ink tubes assembly - Includes 4 ink tubes complete with hardware assemblies at both ends (Carriage crane and ink supply station crane), and 4 setup pens Ink Supply Station (ISS) - Includes ink pump motor, pump sensor, and out-of-ink sensors Setup printhead kit - Used to prime the ink tubes - Includes 4 setup printheads Interconnect Cable C C Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors -.6m (5.ft) long - Interconnect Cable - the Main Wiring Harness From the Electronics Module to Many Other Locations (4-Inch) Ribbon cable kit - Includes installation instructions and ribbon cable with ferrite - Cable has 40 pin (F) connectors -.6m (5.ft) long - Interconnect Cable - the Main Wiring Harness From the Electronics Module to Many Other Locations (4-Inch) +49 (0) 7 /

6 6 HP Ersatzteile für DesignJet 800 Left Cover 4 4 C C C C Left end cover and EIO cover (Black) Left end cover and EIO cover (Black) Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit) Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit) Paper-Axis Motor C Paper axis motor assembly - Includes cables +49 (0) 7 /

7 7 HP Ersatzteile für DesignJet 800 Pinchwheels and Pincharms C C C C Pincharm lift mechanism - Includes cam (a long bar), cam bushings, pincharm lever, pincharm lever bushing (4-Inch) Pincharm lift mechanism - Includes cam (a long bar), cam bushings, pincharm lever, pincharm lever bushing (4-Inch) Pincharm assembly with wheels - (three used) Pincharm sensor - Installed in right front of print chassis +49 (0) 7 /

8 8 HP Ersatzteile für DesignJet 800 Power Supply and Power Switch C Power supply assembly - Includes power switch Printer Stand (0) 7 /

9 9 HP Ersatzteile für DesignJet C C C C C C C C C C778A* Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs (4-Inch) Media bin (Graphite gray) - Plastic tray that mounts to the printer stand legs (4-Inch) Foot brace (4-Inch) Foot brace (4-Inch) Foot assembly (includes casters) - Mounts to the bottom of the left and right printer stand legs (two used) Leg assembly - Side support for the printer - Does NOT include the foot assembly - (Two used) Cross-brace - Brace that connects and supports the two stand legs (4-Inch) Cross-brace - Brace that connects and supports the two stand legs (4-Inch) Hardware kit for printer stand - Includes screwdriver and screws - Used to assemble printer stand 4-inch printer stand and media bin kit for 800 series (Graphite Gray) Right Cover and Control Panel C C C C C C C C C C C C C Right end cover (Black) Trim kit - Installed between the main printer chassis and the left or right end covers (4 items in kit) Front panel overlay (English) Front panel overlay (Korean) Front panel overlay (Taiwanese) Front panel overlay (German) Front panel overlay (French) Front panel overlay (Spanish) Front panel overlay (Italian) Front panel overlay (Japanese) Front panel overlay (Portuguese) Front panel overlay (Chinese) Control panel assembly - Includes ribbon cable and English overlay marked with Menu; Back; Enter; Cancel and Form Feed/Cut * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

10 0 HP Ersatzteile für DesignJet 800 Rollfeed and Spindle C C C89A C C Rollfeed mount kit - Includes left and right housing Rollfeed mount kit - Includes left and right housing 4-inch rollfeed spindle rod assembly for DesignJet 500/800 series - Includes spindle, hubs, and end caps 4-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps - (C89A) 4-inch rollfeed spindle rod assembly - Includes spindle, hubs, and end caps Service Station Holder and Belt Tensioner +49 (0) 7 /

11 HP Ersatzteile für DesignJet 800 C * C * C Service station bracket - Installed on right-side of service station Interconnect PC board - Installed in right-side of printer Belt tensioner kit - Keeps carriage belt tight - Includes pulley and pulley mount bracket Service Station and Left Spittoon C * C Service station - Includes wipers, pen caps, and the right hand spittoon - Installed in right side of printer Left spittoon assembly - Contains absorbers which hold excess ink from printheads Top Cover and Media Deflectors * Artikel sind obsolete, ohne Ersatz +49 (0) 7 /

12 HP Ersatzteile für DesignJet 800 C C C Top cover assembly (Black) (4-Inch) Top cover assembly (Black) (4-Inch) Media deflector kit - Kit includes three deflectors - Installed in front of pinch-wheels - Only two will be used Vacuum Fan C Vacuum fan assembly - Mounts under the main printer chassis +49 (0) 7 /