RS232 Control Box. Table of contents
|
|
- Everett Craig
- 6 years ago
- Views:
Transcription
1 Control Box Table of contents Page Introduction... Installation...5 Mounting the box System cable External power supply Location of switches and connectors Internal switch settings...8 Possible configurations...9 Technical specifications...11 Read these instructions, before putting your system in operation 2
2 Electro Magnetic Compatibility (EMC) This equipment complies with European rules for EMC according to EN55022 and EN Operation is subject to the following two conditions: 1 This device may not cause harmful interference. 2 This device must accept any interference received, including interference that may cause undesired operation. The equipment conforms with the EMC directive and low-voltage directive. This device complies to FCC rules under test conditions that included use of system cables and connectors between system components. If you have any problems, contact your dealer. Warnings Any unauthorized modification to this equipment may cause violation of the FCC rules resulting in the revocation of the authorization to operate the equipment. To prevent fire or shock hazard, do not expose this accessory to rain or moisture. The exclamation mark within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note: We advise you to use the following types of mains power adapters in combination with the camera: UK Philips VCM1162/01R EUR Philips VCM1162/00R US Philips VC11625R (UL listed) 3
3 FAR < > NEAR Colour Observation system talk action menu _ + auto next view FAR < > NEAR Colour Observation Monitor Colour Observation Monitor Introduction Thank you for buying this accessory for your observation system System monitor 2 Video recorder (VCR) 3 Slave monitor Accessory boxes (0-2 per cable) 5 Interface box 6 System cameras 7 Non system cameras (CVBS) 8 Mains power adapter The following items are included in this kit: 1 control box 1 System cable (5m/15ft) 1 User manual 1 cable 1 Power supply
4 The Control Box allows the user to control the Observation System from another location or through a PC. With the right additional equipment, this accessory allows the user to perform most functions of the Observation system (switching to other camera or view mode, action command etc.). In addition, it has a local standard video and audio output from the system monitor, and provides a local alarm relay output. Applications include remote video transmission and system control (specific third party equipment needed) and PC control of system modes. Installation Remark: When the system configuration is altered, the system monitor needs to check and memorise the configuration of the cameras and accessories connected to its inputs. This is done automatically when the power is switched on. Use the power switch to switch off; only operating the power save key is not sufficient. If switching off is impracticable, use the auto install option of the system monitor's install menu. Power on sequence: First power on the control box and then the Observation System. 5
5 Mounting the box 1 Loosen the screw holding the cover and remove the cover. 2 Remove the circuit board 3 Fasten the bottom plate of the box with two screws. Fit the circuit board. 5 IMPORTANT: Adjust the settings of the circuit board switches to configure the box according to your system. See section 'settings'. 6 Fit the cover and secure the screw holding it. 7 Now make the connections. See section 'possible configurations' for the correct connections and the setting of the internal 'slide switches'. 6
6 System cable For the interconnections between the monitor, accessories and camera, a system cable is supplied. For an optimum picture and sound quality, you should always use -wire dual twisted-pair cable when extending the connection (max. 300m/900ft). The cable and plugs are available in the hobby and professional trade. Fix the connectors to the cable corresponding to the figure below Caution: The plugs used for the observation system have the same dimensions as standard telephone plugs. Never connect the security system with telephone equipment! External power supply The box needs to be powered locally with a mains power supply which is included in the product. 7
7 Location of the switches and connectors Audio output 2. Video output 3. System cable output (connect to optional slave monitor). Status LED 5. Alarm output screw block 6. Slide switch (slave or no slave) 7. Dip switches (slave or no slave) 8. connector (D-9, male) 9. DC power input for mains power supply 10. System cable input (connect to system monitor slave output) 11. Audio level switch (high or low) Internal switch settings Slave in line switch (6, 7) With these switch you can enable a slave monitor on the system cable output of the Control Box. There are two possibilities: No slave There is no slave monitor connected after the Control Box (seen from the system monitor) Slave There is a slave monitor connected after the Control Box (seen from the system monitor) Audio level switch (11) With this switch the audio output level can be selected. There are two possibilities: High and Low level. Remark: The slave in line switch is normally set to the "NO SLAVE" position. 8
8 Colour Observation Monitor Possible configurations This section shows the system configurations which are possible with the Control Box. 1. Remote video transmission with control capabilities (third party equipement needed) The Observation System can be connected to a video transmission unit for off-site viewing of the system video. When using the Control Box with selected third party video transmission equipement, the Observation System can also be controlled from the remote site, allowing the user to switch to different cameras and perform local actions like opening doors. Remark: For this application the video transmission unit needs to support the Philips Control Protocol. Observation System Control Box System cable Local audio and video Third party video transmission product Alarm Network Multimedia PC with modem 2. Using PC as slave monitor with control capabilities (third party software needed) The Observation System can connect directly to a PC for control and display. The interface of the Control Box can connect to the serial port of a PC for control of the Observation System. For also displaying the system video on the PC, a PC with a analogue video input (video grabber board) is needed. When the appropriate software is loaded on the PC, the video and audio of the Observation System can be shown on the screen and the functionality of the system can be partly controlled. Remark: For this application specific third party software is needed 9
9 Colour Observation Monitor Colour Observation Monitor Colour Observation Monitor TL720R Observation System Multimedia PC with video input System cable Up to 200 meters Control System slave output Local audio and video to PC grabber card 3. Additional alarm output with short activation time The Observation System has an alarm output (on the back of the monitor) with a long activation time (typically 15 minutes, see system user manual). For some applications this can be too long. The alarm output activation time of the Control Box is 30 seconds, solving the problem in most cases. Observation System System cable Control Alarm cable 2 wire Time lapse VCR System slave output. Connecting a standard monitor as slave monitor Using the video and audio outputs on the Control Box, a standard video monitor or TV can be used as a slave monitor output, while still having the advantage of using the system cable to cover large distances. Observation System Standard TV or monitor System cable Up to 200 meters Control Local audio and video System slave output 10
10 Technical specifications TV standard Power supply Power consumption System connectors System cable System input Slave monitor output Control port Auxiliary outputs audio output video output alarm output Weight Dimensions (hxwxd) Ambient temperature operating storage Ambient humidity both PAL and NTSC External mains power supply (2 VDC) 150 ma RJ11E modular ("telephone" connectors) -wire dual twisted-pair telephone cable RJ11E system input from system slave output RJ11E system output 9 pin D-Sub male, at 9600 bps, 8 bits, no parity, 1 stop bit Cinch from system camera input High level: 500m Vpp, 1kOhm Low level: 10mVpp, 10kOhm BNC (1 Vpp, 75 Ohm) from system camera input 3 pole internal screw block with normally open and normally closed contacts (contact rating 30 V, 5 A AC/DC, activation time 30 seconds) 170 gr. (exclusive mains power supply) 119 x 77 x 2 mm C C %RH Specifications may change without notice. connector pin out 1. N.C. 2. Transmit data (Txd) 3. Receive data (Rxd). N.C. 5. Ground (GND) 6. N.C. 7. Connected to pin 8 8. Connected to pin 7 9. N.C
Electro Magnetic Compatibility (EMC)
Electro Magnetic Compatibility (EMC) This equipment complies with European rules for EMC according to EN5503, EN5500 and EN5008-. Operation is subject to the following two conditions: This device may not
More informationElectro Magnetic Compatibility (EMC)
Electro Magnetic Compatibility (EMC) This equipment complies with the European rules for EMC according to EN5501, EN5500 and EN5008-1. The equipment conforms to the EMC directive and low-voltage directive.
More informationColour Observation Camera
Colour Observation Camera English Table of contents Introduction... 4 Connection and operation facilities... 5 Installation... 5 Camera position Focus adjustment Back-focus adjustment Camera sound on/off
More informationMonochrome Camera. Features. User manual
Monochrome Camera LTC0330/11 LTC0330/21 LTC0350/11 LTC0350/21 LTC0330/51 LTC0330/61 LTC0350/51 LTC0350/61 Features To obtain the best results from your new camera, read these instructions carefully before
More information5 B&W Rear View System Camera
5 B&W Rear View System Camera Instruction Manual MODEL: CA453 www.lorexcctv.com Copyright 2007 LOREX Technology Inc. Thank you for purchasing the Lorex 5 Black & White Rear View System Camera. This system
More informationINSTRUCTION MANUAL DISTRIBUTION UNIT. Please read this manual thoroughly before use, and keep it handy for future reference.
INSTRUCTION MANUAL DISTRIBUTION UNIT Please read this manual thoroughly before use, and keep it handy for future reference. ISSUE 1 May 2006 LIMITATION OF LIABILITY THE INFORMATION IN THIS PUBLICATION
More informationDigital Color Cameras
Digital Color Cameras Eng LTC 0240 LTC 0242 LTC 0243 Philips Communication & Security Systems IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before
More informationSECTION 1 GENERAL DESCRIPTION
1-1 IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions The safety instructions and instruction manual
More informationCONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS...
Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe
More informationDVAA Series Disk Array for DVR1 Series Digital Video Recorder
DVAA Series Disk Array for DVR1 Series Digital Video Recorder Eng Installation Instructions Philips Communication, Security & Imaging Warning! To prevent fire and electronic shock, do not expose this product
More informationPassive UTP Transceiver Hub Installation Guide
Video Data Passive UTP Transceiver Hub Installation Guide Models Include: - Sixteen (16) Camera Channels Rev. 121710 More than just power. TM Overview: Altronix Passive UTP Transceiver Hub transmits UTP
More informationMonochrome Cameras LTC 0140 LTC 0142 LTC Eng. Philips Communication & Security Systems
Monochrome Cameras Eng LTC 0140 LTC 0142 LTC 0143 Philips Communication & Security Systems IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the
More informationNeets Switching Relay - 2. Installation manual
Neets Switching Relay - 2 Installation manual Foreword The purpose of this document is to describe how to install and configure Neets Switching Relay 2 with build-in power supply. COPYRIGHT - All information
More informationKeyboard Controller PIH-800III INSTRUCTION MANUAL
Keyboard Controller PIH-800III INSTRUCTI MANUAL CAUTI RISK OF ELECTRIC SHOCK CAUTI TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
More informationOperating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO
Order Number: 8160.UISO Status: V3; 17.09.2010c G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 1 TABLE OF CONTENTS PLEASE READ BEFORE USE... 3 DESCRIPTION... 5 UMB ISO CONVERTER ISOCON... 6 CONFIGURATION...
More informationActive UTP Transceiver Hub with Integral Isolated Camera Power
Active UTP Transceiver Hub with Integral Isolated Installation Guide HubWayEX16SP - UL Listed sixteen (16) Channel Active UTP Transceiver Hub with Integral Isolated Rev. 011810 More than just power. TM
More informationActive UTP Transceiver Hub with Integral Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Installation Guide Models Include: HubWayLD8CDS - UL Listed eight (8) Channel Active UTP Transceiver Hub with Integral HubWayLD82CDS - UL Listed eight (8) Channel
More informationCF /BF SERIES CAMERAS
Lens not Included CF /BF SERIES CAMERAS INSTRUCTION MANUAL Wide Dynamic NTSC Hi-Resolution Dual Power Wide Dynamic PAL Hi-Resolution Dual Power Wide Dynamic PAL Hi-Resolution Mains Power PAL Hi-Resolution
More informationMGate 4101-MB-PBS Series
MGate 4101-MB-PBS Series 1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways Features and Benefits Protocol conversion between Modbus and PROFIBUS Supports PROFIBUS DP V0 slave Supports Modbus RTU/ASCII
More informationG.SHDSL NTU with Fixed Serial Interfaces
DECEMBER 2006 ME231A ME232A ME233A G.SHDSL NTU with Fixed Serial Interfaces CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX SUPPORT FREE technical support,
More informationMGate 5102-PBM-PN Series
MGate 5102-PBM-PN Series 1-port PROFIBUS-to-PROFINET gateways Features and Benefits Protocol conversion between PROFIBUS and PROFINET Supports PROFINET IO device Supports PROFIBUS DP V1 master Automatic
More informationVIDEO DOORPHONE SYSTEM
VIDEO DOORPHONE SYSTEM OWNER S MANUAL INSTALLATION AND OPERATION BEFORE INSTALLING OR, OPERATING THE SYSTEM, PLEASE READ THIS MANUAL MODEL:VI 300 TABLE OF CONTENTS Section Important Safety Instructions...
More informationGT- IRDM-9603 Product description Rev. 2 17/06/2014
GT- IRDM-9603 Product description Rev. 2 17/06/2014 1 1. Overview The GT- IRDM- 9603 is a complete Satellite Terminal solution for Satellite applications. Based on IRIDIUM 9603 module. 2. Hardware Interface
More informationCONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS...
Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe
More informationINSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3
INSTALLATION MANUAL LC 200 Electronic Overload Guard Software versione PW0501 R 0.3 CONTENTS MAIN FEATURES LC 200 TECHNICAL FEATURES Page 2 SYMBOLS Page 3 WARNINGS Page 3 IDENTIFICATION DATA PLATE Page
More informationTransceiver Hub with Integral Camera Power
Passive UTP Transceiver Hub with Integral Installation Guide Models Include: HubWay8CD HubWay16CD - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver Hub
More informationActive UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Active UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWayLD8Di HubWayLD16Di - UL Listed eight (8) Channel Active UTP - UL Listed sixteen (16) Channel Active UTP Transceiver
More informationInstallation Guide. QBox-V6. Standalone/Spare V6 SDI QBox. Standalone/Spare V6 SDI QBox. Part No. A
Installation Guide Standalone/Spare V6 SDI QBox QBox-V6 Standalone/Spare V6 SDI QBox Part No. A9009-0004 EN www.autocue.com Copyright 2017 All rights reserved. Original Instructions: English All rights
More informationDS-1H05 Ethernet-over-Coax Extender. User Manual
DS-1H05 Ethernet-over-Coax Extender User Manual Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to DS-1H05-T,
More informationPassive UTP Transceiver Hub with Integral Isolated Camera Power Installation Guide
Passive UTP Transceiver Hub with Integral Isolated Installation Guide Models Include: HubWay8Di HubWay16Di - UL Listed eight (8) Channel Passive UTP - UL Listed sixteen (16) Channel Passive UTP Transceiver
More informationMC 11 EB-2 Power supply cabinet with external bus, AC version
MC 11 EB-2 Power supply cabinet with external bus, AC version USER/MAINTENANCE MANUAL 1 SLOT 0 SLOT 1 SLOT 2 SLOT 3 SLOT 4 SLOT 5 SLOT 6 SLOT 7 SLOT 8 SLOT 9 SLOT 10 SLOT 11 EB-2 (a) MC11 (b) (c) Figures
More informationSERVICE MANUAL 1/3 SONY DSP COLOR CCD CAMERA OVER 650TVL SERIES
SERVICE MANUAL 1/3 SONY DSP COLOR CCD CAMERA OVER 650TVL SERIES The serial number of this product may be found on the bottom of the unit. You should note the serial number of this unit in the space provided
More informationInstalling and Configuring Rialto Analytic Appliances
Installing and Configuring Rialto Analytic Appliances Important Safety Information This manual provides installation and operation information and precautions for the use of this camera. Incorrect installation
More information2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230
2.4 GHz WIRELESS B&W VIDEO SECURITY SYSTEM MODEL WL5230 FOR MORE INFORMATION WWW.STRATEGICVISTA.COM Before operating the system, please read this manual thoroughly and retain it for future reference!!!
More informationTVAC25100 TVAC25110 User manual
TVAC25100 TVAC25110 User manual Version 11/2010 Original user manual. Keep for future use. 12 Introduction Dear Customer, Thank you for purchasing this product. This product meets the requirements of the
More informationSYSTEM CONTROLLER TB-CN2R1 (2 AXIS STANDARD) TB-CN3R1 (3 AXIS STANDARD) TB-CN3R1W (3 AXIS WEB) Instruction Manual. Rev 2.0 TB-CN2R1 (2 AXIS STANDARD)
SYSTEM CONTROLLER TB-CN2R1 (2 AXIS STANDARD) TB-CN3R1 (3 AXIS STANDARD) TB-CN3R1W (3 AXIS WEB) Instruction Manual TB-CN2R1 (2 AXIS STANDARD) TB-CN3R1 (3 AXIS STANDARD) TB-CN3R1W (3 AXIS WEB) Rev 2.0 CONTENTS
More informationES-CAM4A Motorized IP Camera
ES-CAM4A Motorized IP Camera www.etiger.com EN Specifications - Image sensor: 1/3.2 CMOS, 2 MP - Video resolution 320x240, 640x480, 1280x720 (H.264) - Digital zoom: x2 - Rotation: horizontal (-175 / +175
More information8-Port IP40 IEEE802.3af PoE Unmanaged Industrial Switch User s Manual
8-Port IP40 IEEE802.3af PoE Unmanaged Industrial Switch User s Manual Version 1.1 Content Overview... 1 Introduction... 1 Features... 2 Technical Specifications... 3 Packing List... 5 Safety Precaution...
More informationWide Dynamic Range Dome Camera WDR-D3
Wide Dynamic Range Dome Camera WDR-D3 200 New Highway Amityville, NY 11701 631-957-8700 www.specotech.com Please read this manual thoroughly before operation and keep it handy for further reference. WARNING
More informationF1000 User's Manual. (Version: V1.01)
(Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...
More informationHMXAT200 Series System Controller
HMXAT200 Series System Controller User Manual MXQI040036 July 2004 Rev. F ISSUE DATE REVISIONS 1 September 2001 Initial release. A October 2001 Added model numbers for MXAT200 and descriptions; removed
More informationEZ864 UMTS Terminal Telit Cellular GSM Engine
EZ864 UMTS Terminal Telit Cellular GSM Engine Version: 01.01 EZ864 UMTS Terminal_HD_V01.01 06.Mar.2008-1 - Hardware Interface Description 1. Hardware Features of the EZ864 UMTS Terminal Feature Implementation
More informationUser Manual Color Door Camera
User Manual Color Door Camera DRC-4MC Thank you for purchasing COMMAX products. Please carefully read this User s Guide (in particular, precautions for safety) before using a product and follow instructions
More informationLED PANEL. User Manual Please read the instructions carefully before use LED-7TC. Innovation, Quality, Performance 15-
LED PANEL LED-7TC Innovation, Quality, Performance User Manual Please read the instructions carefully before use 15- 9. Fixture Cleaning TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications
More information+Cam Quick Start Guide
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
More informationPORTABLE HOME SECURITY VIDEO CAMERA
PORTABLE HOME SECURITY VIDEO CAMERA Instruction Manual English Version1.0 MODEL: SG6227 www.lorexcctv.com Copyright 2007 Lorex Technology Inc. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN.! CAUTION: TO
More informationLED PANEL. User Manual Please read the instructions carefully before use LED-212RGB TABLE OF CONTENTS. 1. Safety Instructions
TABLE OF CONTENTS LED PANEL 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to set the unit 5. How to control the fixture 6. DMX512 Configuration 7. DMX512 Connections 8. Troubleshooting
More informationNanoServ. Setup Guide. Thin System/Ultra-Thin System. 1.0 What s included with the NanoServ. 2.0 Steps for setting up the NanoServ
NanoServ Thin System/Ultra-Thin System Setup Guide 1.0 What s included with the NanoServ The following items are included with the NanoServ : 1. NanoServ 2. AC Power Adaptor 3. CD-ROM with User s Manual
More informationInstallation instructions Ethernet switch EC / / 2011
Installation instructions Ethernet switch EC2095 7390731 / 00 02 / 2011 Contents 1 Preliminary note................................................. 3 1.1 Symbols used...............................................
More informationINSTALLATION MANUAL. HDMI 1x4 Splitter B-230-HDSPLTR-1x4. B-230-HDSPLTR-1x4 HDMI OUT 4 HDMI OUT 3 HDMI OUT 2 HDMI OUT 1 HDMI OUT 4 HDMI IN
HDMI 1x4 Splitter B-230-HDSPLTR-1x4 INSTALLATION MANUAL HDMI OUT 4 HDMI OUT 3 HDMI OUT 2 HDMI OUT 1 HDMI OUT 1 B-230-HDSPLTR-1x4 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4 HDMI IN HDMI IN 2 IMPORTANT SAFETY INSTRUCTIONS
More informationINSTALLATION MANUAL. HDMI 1x8 Splitter B-230-HDSPLTR-1x8 B-230-HDSPLTR-1X8
HDMI 1x8 Splitter B-230-HDSPLTR-1x8 INSTALLATION MANUAL HDMI OUT 8 HDMI OUT 7 HDMI OUT 6 HDMI OUT 5 HDMI OUT 4 HDMI OUT 3 HDMI OUT 2 HDMI OUT 1 B-230-HDSPLTR-1X8 HDMI OUT 1 HDMI OUT 2 +5 VDC HDMI OUT 3
More information3.The ventilation holes must remain free from obstruction. Failure to comply may result in damage to the appliance.
NOTE 1.This unit must be located in a position away from water, moisture or other liquids. Avoid placing this unit where it will be subject to vibration or excessive temperatures. This unit does not contain
More informationMGate 5105-MB-EIP Series
MGate 5105-MB-EIP Series 1-port Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways Features and Benefits Protocol conversion between Modbus and EtherNet/IP Supports EtherNet/IP Scanner/Adapter Supports Modbus
More informationTruVision IP Thermal Camera Installation Guide
TruVision IP Thermal Camera Installation Guide P/N 1073335-EN REV B ISS 19OCT17 Copyright Trademarks and patents Manufacturer Certification 2017 United Technologies Corporation, Interlogix is part of UTC
More informationNetwork Camera. Quick Guide DC-B1203X. Powered by
Network Camera Quick Guide DC-B1203X Powered by Safety Precautions English WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
More information4. How to Connect the Fixture 3-Pin and 5-Pin XLR DMX Connectors:
TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to Connect the Fixture 5. DMX512 Configuration 6. DMX512 Connections 7. How to Set the Unit 8. Troubleshooting
More informationQuick Guide. V940D Network Dome Camera XX
Quick Guide V940D Network Dome Camera XX292-20-01 Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the operation will be entirely
More informationCOGNEX. Checker SensorView. Quick Reference Guide
COGNEX Checker SensorView Quick Reference Guide 890 SensorView 890 Overview SensorView 890 provides self-contained IP-65 touchscreen configuration, control, and monitoring of one or more Checker 4G series
More informationConnecting a Cisco Input Module
CHAPTER 4 Overview The optional Cisco Input Module (Figure 4-1) is attached to a Cisco Physical Access Gateway or Cisco Reader Module to provide additional connections for up to ten input devices. Each
More informationDP-234Q (NTSC) DP-734Q (PAL) Hands-Free Video Door Phone Manual
DP-234Q (NTSC) DP-734Q (PAL) Hands-Free Video Door Phone Manual Screen image simulated. * has four LEDs for nighttime operation Remotely and securely talk to visitors and unlock doors, gates, etc. from
More informationInstruction Manual. DW5V9TVB, DW5V9TVB-1 5 Outdoor Dome With True Day/Night Gen III IR Filter Retraction
Instruction Manual DW5V9TVB, DW5V9TVB-1 5 Outdoor Dome With True Day/Night Gen III IR Filter Retraction Information may change without notice. This document provides technical information for the user.
More informationNPort IA5000A Series. 1, 2, and 4-port serial device servers for industrial automation. Overview
Serial-to-Ethernet Device Servers NPort IA5000A Series 1, 2, and 4-port serial device servers for industrial automation Enhanced surge protection for LAN/serial/power 2 kv isolation for serial signals
More informationLantech. IPES /100TX with 4 PoE Injectors 24~48VDC Industrial Switch. User Manual
Lantech IPES-0008-4 8 10/100TX with 4 PoE Injectors 24~48VDC Industrial Switch User Manual V1.00 Jun 2010 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital
More information4 10/100/1000T Mini-GBIC with 4 IEEE 802.3at High Power PoE Industrial Wide Temperature Switch. User Manual SISTP LRT
4 10/100/1000T + 2 1000 Mini-GBIC with 4 IEEE 802.3at High Power PoE Industrial Wide Temperature Switch User Manual V1.0 September-2013 FCC Warning This Equipment has been tested and found to comply with
More informationInstruction Manual. Hidden CCD Camera VK-1321/PIR (B&W), VKC-1338/PIR (Colour)
Instruction Manual Hidden CCD Camera VK-1321/PIR (B&W), VKC-1338/PIR (Colour) 1 Contents 1. Safety Instructions... 2 2. Description... 3 3. Installation... 4 4. Wiring Instructions... 5 5. PIR Detector
More informationSAMURAI SCAN 50 LED-SC50D. User Guide. Innovation, Quality, Performance. Professional Entertainment Technology 19-
SAMURAI SCAN 50 LED-SC50D Innovation, Quality, Performance User Guide Professional Entertainment Technology 19- EC Declaration of Conformity We declare that our products (lighting equipments) comply with
More informationRack Mount Power Supplies
Rack Mount Power Supplies Installation Guide Models Include: VertiLine33D - 12VDC @ 8A - Sixteen (16) PTC protected outputs VertiLine33TD - 12VDC @ 16A - Sixteen (16) PTC protected outputs VertiLine63D
More informationTCD channel H.264 Video Encoder Hardware User s Manual (DC 12V) Ver. 2010/10/29
TCD-2100 1-channel H.264 Video Encoder Hardware User s Manual (DC 12V) Ver. 2010/10/29 Table of Contents 0. Precautions 3 1. Introduction 4 Package Contents... 4 Features and Benefits... 5 Safety Instructions...
More informationB&W RearView Camera Installation & Operation
B&W RearView Camera Installation & Operation CA52 (Camera) FOR MORE INFORMATION WWW.STRATEGICVISTA.COM BEFORE OPERATING THIS SYSTEM, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE
More informationHDMI 1x2 Splitter B-230-HDSPLTR-1x2 INSTALLATION MANUAL HDMI OUT 2 HDMI OUT 1 B-230-HDSPLTR-1X2 POWER HDMI IN
HDMI OUT 2 HDMI 1x2 Splitter B-230-HDSPLTR-1x2 INSTALLATION MANUAL B-230-HDSPLTR-1X2 HDMI OUT 1 POWER HDMI IN IMPORTANT SAFETY INSTRUCTIONS 1. Read and follow all instructions and warnings in this manual.
More informationThe modems are made in industrial 108mm wide aluminium housing for DIN rail mounting. UCM RS232 interface
DESCRIPTION The modems are a series of general-purpose industrial modems, which can be used for data communication through Public Switched Telephone Networks (PSTN). The modems can operate in 2-wire, full-duplex,
More informationTruVision HD-TVI 720P and 1080P Bullet Camera Installation Guide
TruVision HD-TVI 720P and 1080P Bullet Camera Installation Guide P/N 1073164-EN REV C ISS 22NOV17 Contents Product overview 2 Camera description 5 Installation 8 Built-in heater in the TVB-2405/4405 camera
More informationDKG-210 UNIVERSAL INTERNET GATEWAY UNIT
DKG-210 UNIVERSAL INTERNET GATEWAY UNIT AC & DC SUPPLY VERSIONS DESCRIPTION The DKG-210 is designed for internet monitoring and control of industrial devices using different protocols through the RAINBOW
More informationWiring Section 3-3. NQ-Series communication ports support various types of (serial) communication.
3-3 Wiring NQ-Series models have, besides one power connector, a number of communication ports. Please refer to Table 2.2: Common specifications for NQ-Series and Table 2.3: Specifications per NQ-Series
More informationIndustrial Camera GP-MF602. Before attempting to connect or operate this product, please read these instructions completely.
Industrial Camera GP-MF602 Before attempting to connect or operate this product, please read these instructions completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC
More informationTABLE OF CONTENTS 1. OVERVIEW... 1
TABLE OF CONTENTS 1. OVERVIEW... 1 1.1. SPECIFICATIONS... 1 1.1.1. Electrical... 1 1.1.2. Compliance... 2 1.1.3. Physical... 2 1.2. COOLING... 2 1.2.1. Fan Exhaust... 2 1.3. MOUNTING... 3 1.4. POWER...
More informationPower Input Assignment Power1 12VDC DC Jack VDC Power2 - Power Ground
Quick Start Guide This quick start guide describes how to install and use the Hardened Ethernet Extender. This is the Hardened Ethernet Extender of choice for harsh environments constrained by space. Physical
More informationPTC-101-M12 Hardware Installation Guide
PTC-101-M12 Hardware Installation Guide Moxa Industrial Media Converter Third Edition, May 2014 2014 Moxa Inc. All rights reserved. P/N: 1802001016021 Overview The PTC-101-M12 industrial media converter
More informationEX-RC1 Remote I/O Adapter
EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter
More informationES-CAM2A IP Camera. Instrukcja pobrana ze sklepu
ES-CAM2A IP Camera www.etiger.com Instrukcja pobrana ze sklepu www.ekocentrum24.pl EN Box content - ES-CAM2A x1 - Mounting bracket x1 - AC Adaptor x1 - User Manual x1 and apps Before using the ES-CAM2A,
More informationMGate MB3170/MB3270 Quick Installation Guide
MGate MB3170/MB3270 Quick Installation Guide Edition 7.1, February 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778
More informationDC-D4213RX DC-D4213WRX
Network Camera Quick Guide DC-D4213RX DC-D4213WRX Powered by Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
More informationipulse Installation and User Guide IP2-PoE
IP2-PoE Hardware Version 2.0 2007 VideogeniX Inc. ipulse PoE Manual P/N: 040-00003-001 Owner s Record The model and serial numbers are located on the bottom of the ipulse unit. Record the serial number
More informationD6030S - D6030D INSTRUCTION MANUAL. D SIL 3 Switch/Proximity Detector Repeater Relay Output. Models D6030S, D6030D
D600S - D600D INSTRUCTI MANUAL SIL Switch/Proximity Detector Repeater Relay, DIN Rail, Models D600S, D600D D600 - SIL Switch/Proximity Detector Repeater Relay G.M. International ISM0- Characteristics General
More informationMicrobar COB System. User Manual. Order code: EQLED137
Microbar COB System User Manual Order code: EQLED137 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE- FULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please
More informationIndustrial Media Converters
Wireless AP Industrial s Introduction & Features Fiber s Ethernet s Serial s s Distance Extension With Higher Immunity Introduction The media converters have incorporated SUNIX advanced technologies such
More informationKSD-800 Series. Installation Guide. Industrial 8-Port Fast Ethernet Switches with Fiber Connectivity DOC A -1-
KSD-800 Series Industrial 8-Port Fast Ethernet Switches with Fiber Connectivity Installation Guide DOC.110516A -1- (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced
More informationModular 8-Port Mid-span Power over Ethernet Injector
Modular 8-Port Mid-span Power over Ethernet Injector KPOE-800-1P KPOE-800-2P Installation Guide DOC.090201 1 (C) 2008 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced
More informationSoundwebTM. Installation Guide
105 SoundwebTM Soundweb TM 9000 Installation Guide Soundweb TM Regulatory Information An example of this equipment has been tested and found to comply with the following European and international Standards
More informationMid-span 802.3af PoE Injector. Installation Guide KPOE-100
Mid-span 802.3af PoE Injector Installation Guide KPOE-100 Doc. 070521 1 (C) 2005 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used
More informationEX-RC1 Remote I/O Adapter
EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter
More information1. REMOTE SENSOR 2. A/V IN JACK 4. DC 12V IN 5. TFT-LCD SCREEN 6. EARPHONE JACK 7. SPEAKER 9. TV/AV BUTTON 13. ROD ANTENNA 14.
1 2 WARNINGS The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. The lightening flash with arrowhead symbol within the triangle
More informationKPW-T2P25. PoE Splitter. Industrial IEEE 802.3at High Power. User s Manual -1- DOC
KPW-T2P25 Industrial IEEE 802.3at High Power PoE Splitter User s Manual DOC.121011-1- (C) 2012 KTI Networks Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any
More informationProfessional Entertainment Technology. imove 50SR. Innovation, Quality, Performance 21-
Innovation, Quality, Performance 21- imove 50SR User Guide Professional Entertainment Technology EC Declaration of Conformity We declare that our products (lighting equipments) comply with the following
More information10/100/1000T to Mini-GBIC Industrial Switch Converter 10/100/1000T to 1000SX/LX Industrial Switch Converter. AMG9011G-H (-40 to 75C) User Manual
10/100/1000T to Mini-GBIC Industrial Switch Converter 10/100/1000T to 1000SX/LX Industrial Switch Converter AMG9011G-H (-40 to 75C) User Manual www.amgsystems.com Content Overview...1 Introduction... 1
More informationLED W RGBA User Manual
LED- 245-1W RGBA User Manual Please read the instructions carefully before use CONTENTS 1. Safety Instructions...2 2. Technical Specifications...3 3. How To Set The Unit...4 3.1 Control Panel...4 3.2 Main
More information10/100Base-TX Industrial Ethernet Extender
Quick Start Guide This quick start guide describes how to install and use the Ethernet Extender. The Ethernet Extender introduced here provides one channel for Ethernet over existing coaxial cable. Product
More informationRGB Power Batten. User Manual. Order code: EQLED032
RGB Power Batten User Manual Order code: EQLED032 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE- FULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please
More informationCS2 DMX Distribution Splitter
CS2 DMX Distribution Splitter User Manual Order code: BOTE72 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up,
More informationTABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to Connect the Fixture 5. DMX512 Connections 6.
TABLE OF CONTENTS 1. Safety Instructions 2. Technical Specifications 3. Installation 4. How to Connect the Fixture 5. DMX512 Connections 6. How to Set the Unit 7. DMX Configuration 8. IR Remote Control
More information