SOCOMEC SIRCOVER MANUALLY OPERATED CHANGEOVER SWITCHES
|
|
- Tracy Powers
- 6 years ago
- Views:
Transcription
1 MANALL OPERATED CHANGEOER SWITCHES are manually operated multipolar changeover switches. They changeover between two low voltage power circuits under load and provide safety disconnection. Application: NORMAL/EMERGENC Application: EARTHING HIGHLIGHTS: Fully visualized breaking 3 stable positions ( or overlapping ) APPLICATIONS: Manual changeover from main supply to back-up source Switching between loads (motor or back-up) Reversing motor via phase inversion Ratings 15, 160, 0,, 400, 630, 800, 1, 1600, 00, and 31 amperes Approvals IEC NF EN DE 0660 Teil 7 (199) NBN EN BS EN Earthing switch Note: Fully motorized versions available on request, please consult us. 59
2 SELECT A SWITCH MANALL OPERATED CHANGEOER SWITCHES RANGE: Changeover Switches from 15 to 31 Amperes AMPERE RATING CD 15A CD 160A CD 0A FOR OPERATION : 3 POLE : 4 POLE FOR OPERATION (OERLAPPING) : 3 POLE : 4 POLE EXTERNAL OPERATION PADLOCK 0 0 I+II IP RATING SELECT A SHAFT SHAFT LENGTH (inches/mm) 7.9/0 1.6/3 DIRECT OPERATION / PADLOCK IP RATING / OPTIONS FOR AND CHANGEOER SWITCHES 3-pole Terminal Shrouds Kit (IP) (1) Line + load shroud side / front terminals Line + load shroud side / rear terminals 4-pole Terminal Shrouds Kit (IP) (1) Line + load shroud side / front terminals Line + load shroud side / rear terminals Bridging bars For 1 pole () Auxiliary contacts 1st NO.NC per position, 16A nd NO.NC (3) per position, 16A Note: Door interlocking feature in ON position for external front operation For any specific interlocking device (Ronis, Castell, Kirck), please consult us (1) One shroud required for front and for back terminal, max two shrouds required Cannot fit rear terminal shroud when bridging bars are fitted () One bridging bar required per pole (3) Mounted on the first aux. contact (part ) 60
3 MANALL OPERATED CHANGEOER SWITCHES SELECT A SWITCH AMPERE RATING CD A CD 400A CD 630A FOR OPERATION : 3 POLE : 4 POLE FOR OPERATION (OERLAPPING) : 3 POLE : 4 POLE EXTERNAL OPERATION PADLOCK 0 0 I+II IP RATING SELECT A SHAFT SHAFT LENGTH (inches/mm) 7.9/0 1.6/3 DIRECT OPERATION / PADLOCK IP RATING / OPTIONS FOR AND CHANGEOER SWITCHES 3-pole Terminal Shrouds Kit (IP) (1) Line + load shroud side / front terminals Line + load shroud side / rear terminals 4-pole Terminal Shrouds Kit (IP) (1) Line + load shroud side / front terminals Line + load shroud side / rear terminals Bridging bars For 1 pole () Auxiliary contacts 1st NO.NC per position, 16A nd NO.NC (3) per position, 16A Note: Door interlocking feature in ON position for external front operation For any specific interlocking device (Ronis, Castell, Kirck), please consult us (1) One shroud required for front and for back terminal, max two shrouds required Cannot fit rear terminal shroud when bridging bars are fitted () One bridging bar required per pole (3) Mounted on the first aux. contact (part ) 61
4 MANALL OPERATED CHANGEOER SWITCHES SELECT A SWITCH AMPERE RATING CD 800A CD 1A 1600A FOR OPERATION : 3 POLE : 4 POLE FOR OPERATION (OERLAPPING) : 3 POLE : 4 POLE EXTERNAL OPERATION PADLOCK IP RATING Consult us Consult us Consult us SELECT A SHAFT SHAFT LENGTH (inches/mm) 7.9/0 17.7/ DIRECT OPERATION / PADLOCK IP RATING / OPTIONS FOR AND CHANGEOER SWITCHES 3-pole Terminal Screen Line or load side / front terminals 4-pole Terminal Screen Line or load side / front terminals Bridging bars For 1 pole (1) Auxiliary contacts 1st NO.NC per position, 16A nd NO.NC () per position, 16A Note: Door interlocking feature in ON position for external front operation For any specific interlocking device (Ronis, Castell, Kirck), please consult us (1) One bridging bar required per pole () Mounted on the first aux. contact (part or ) 6
5 MANALL OPERATED CHANGEOER SWITCHES SELECT A SWITCH AMPERE RATING 00A A 31A FOR OPERATION : 3 POLE : 4 POLE EXTERNAL OPERATION PADLOCK IP RATING SELECT A SHAFT SHAFT LENGTH (inches/mm) 1.6/ DIRECT OPERATION PADLOCK IP RATING OPTIONS FOR CHANGEOER SWITCHES 3-pole Terminal Screen Line + load side / front terminals 4-pole Terminal Screen Line + load side / front terminals Bridging bars For 1 pole (1) (factory fitted) Auxiliary contacts 1st NO.NC per position, 16A nd NO.NC () per position, 16A Note: Door interlocking feature in ON position for external front operation For any specific interlocking device (Ronis, Castell, Kirck), please consult us (1) One bridging bar required per pole () Mounted on the first aux. contact (part ) 63
6 MANALL OPERATED CHANGEOER SWITCHES FROM 15 TO 31 A IEC ELECTRICAL & MECHANICAL CHARACTERISTICS Rating (Thermal current Ith at 40 C) CD 15A CD 160A CD 0A CD A CD 400A CD 630A Rated insulation voltage i () Rated impulse withstand voltage imp (k) Dielectric strength () Hz 1 min Rated operational current Ie (A) (1) A/B A/B A/B A/B A/B A/B 400 AC AC 1A / AC 1B 15/15 160/160 0/0 / 400/ /630 AC A / AC B 15/15 160/160 0/0 / 400/ /630 AC 3A / AC 3B 15/15 160/ /160 / / 0/0 690 AC () AC A / AC B 15/15 160/160 0/0 / 400/ /630 AC 1A / AC 1B 15/15 160/ /160 0/ 0/ 0/0 AC A / AC B 15/15 15/15 15/15 15/160 15/ /315 AC 3A / AC 3B 63/80 63/80 63/80 0/15 0/15 160/0 DC DC A / DC B 15/15 160/160 0/0 / 400/ /630 DC 1A / DC 1B 15/15 160/ /160 / / 630/630 DC A / DC B 15/15 160/ /160 / / 0/0 DC 3A / DC 3B 15/15 15/15 15/15 0/0 0/0 0/0 440 DC DC A / DC B 15/15 160/160 0/0 / 400/ /630 DC 1A / DC 1B 15/15 15/15 15/15 0/0 0/0 0/0 DC A / DC B 15/15 15/15 15/15 0/0 0/0 0/0 DC 3A / DC 3B 15 (3) /80 15 (3) /15 (3) 15 (3) /15 (3) 0 (3) /0 (3) 0 (3) /0 (3) 0 (3) /0 (3) Motor Power (kw) (1) A/B A/B A/B A/B A/B A/B 400 AC without pre break auxiliary contact: AC 3 63/63 80/80 80/80 13/13 13/13 80/ AC without pre break auxiliary contact: AC 3 55/75 55/75 55/75 90/1 90/1 1/185 Overload capacity Fuse-protected short circuit withstand (ka rms prospective) with gg DIN fuse (4) Rating of DIN gg fuse (A) Cut-off current (ka peak) Rated short-time withstand current Icw (ka rms 1s) Making & Breaking capacity characteristics (A rms) Breaking capacity: 400 AC 3A Making capacity: 400 AC 3A Rated short-circuit making capacity Icm (ka peak prospective) Mechanical durability (number of operations) Operating torque (Nm) Connection (copper) Minimum section at Ith (mm ) (Cu cables) x 1 Maximum section (mm ) (cables) x 300 Minimum section at Ith (mm ) (Cu busbar) x 30 x 5 Maximum width (mm) (busbar) Minimum tightening torque (Nm) Weight (kg) 3-pole switch pole switch (1) A indication=frequent operations B indication=infrequent operations () With terminal shrouds or separation shield between terminals (3) 4 pole changeover switch with poles in series per polarity (4) For a rated operating voltage e=400 AC 64
7 MANALL OPERATED CHANGEOER SWITCHES FROM 15 TO 31 A IEC ELECTRICAL & MECHANICAL CHARACTERISTICS Rating (Thermal current Ith at 40 C) CD 800A CD 1A 1600A 00A A 31A Rated insulation voltage i () Rated impulse withstand voltage imp (k) Dielectric strength () Hz 1 min Rated operational current Ie (A) (1) A/B A/B A/B A/B A/B A/B 400 AC AC 1A / AC 1B 800/800 1/1 1600/ /00 / 31/31 AC A / AC B 800/800 1/1 1/1 00/00 00/ / AC 3A / AC 3B 800/800 1/1 00/00 1/1 1/1 1/1 690 AC () AC A / AC B 800/800 1/1 1600/ /00 / 31/31 AC 1A / AC 1B 800/ / /00 00/ 00/ AC A / AC B 800/ /800 00/00 00/00 00/00 AC 3A / AC 3B 0/0 800/ / /800 DC DC A / DC B 800/800 1/1 1600/ /00 / 31/31 DC 1A / DC 1B 800/800 1/1 1600/ /00 00/ 00/ DC A / DC B 800/800 1/1 1/1 1/1600 1/1600 1/1600 DC 3A / DC 3B 800/800 1/1 1 (3) /1 (3) 1 (3) /1 (3) 1 (3) /1 (3 1 (3) /1 (3) 440 DC DC A / DC B 800/800 1/1 1600/ /00 / 31/31 DC 1A / DC 1B 800 (3) /800 (3) 1 (3) /1 (3) 1/1 1/1 1/1 1/1 DC A / DC B 800 (3) /800 (3) 1 (3) /1 (3) 1 (3) /1 (3) 1 (3) /1 (3) 1 (3) /1 (3) 1 (3) /1 (3) DC 3A / DC 3B 800 (3) /800 (3) 1 (3) /1 (3) 00 (3) /00 (3) 00 (3) /00 (3) 00 (3) /00 (3) 00 (3) /00 (3) Motor Power (kw) (1) A/B A/B A/B A/B A/B A/B 400 AC without pre break auxiliary contact: AC 3 560/ /560 7/7 7/7 7/7 690 AC without pre break auxiliary contact: AC 3 400/ /475 7/7 7/7 7/7 Overload capacity Fuse-protected short circuit withstand (ka rms prospective) with gg DIN fuse (4) Rating of DIN gg fuse (A) x 800 x 00 x 1 Cut-off current (ka peak) Rated short-time withstand current Icw (ka rms 1s) 55 Making & Breaking capacity characteristics (A rms) Breaking capacity: 400 AC 3A Making capacity: 400 AC 3A Rated short-circuit making capacity Icm (ka peak prospective) Mechanical durability (number of operations) Operating torque (Nm) Connection (copper) Minimum section at Ith (mm ) (Cu cables) x 185 Maximum section (mm ) (cables) x x x 40 Minimum section at Ith (mm ) (Cu busbar) x 40 x 5 x 60 x 5 x 80 x 5 3 x 0 x 5 4 x 0 x 5 4 x 0 x 5 Maximum width (mm) (busbar) Minimum tightening torque (Nm) Weight (kg) 3-pole switch pole switch (1) A indication=frequent operations B indication=infrequent operations () With terminal shrouds or separation shield between terminals (3) 4 pole changeover switch with poles in series per polarity (4) For a rated operating voltage e=400 AC 65
8 MANALL OPERATED CHANGEOER SWITCHES DIMENSIONS (DAL DIMENSIONS: IN/MM) CD 15-1 A Direct front operation External front operation A 1 M II 11/80 AC BA CA O W N II I 1 4 ø 0.18/4.5 ø 1./31 II 1.97 I CA X T T T J I H L1 C 0.7/ H E P L 1. Terminal shrouds. Handle: 15 to 630 A: P=.75/70, L1=5.51/140, L=4.98/ to 1 A: P=4.17/6, L1=8.7/, L=8.7/ OERALL DIMENSIONS (in) SWITCH MONTING (in) CONNECTION TERMINALS (in) C E 8. to to to to to to to to 17.0 AC H J 3p J 4p N T W 0.5 x X 3p X 4p BA CA OERALL DIMENSIONS (mm) SWITCH MONTING (mm) CONNECTION TERMINALS (mm) C E 8 to to to to to to to to 43 AC H J 3p J 4p N T W x11 X 3p X 4p BA CA
9 MANALL OPERATED CHANGEOER SWITCHES DIMENSIONS (DAL DIMENSIONS: IN/MM) 1600 A Direct front operation External front operation A M F ø ø == / / X T T J II O T I / / 4 ø ø ø 1. ø Terminal screen. RONIS EL 11 AP lock OERALL DIMENSIONS (in) 9. F 3p 18.6 F 4p 3.3 SWITCH MONTING J 3p 17. J 4p T 4.7 CONNECTION TERMINALS (in) X OERALL DIMENSIONS (mm) SWITCH MONTING F 3p 47 F 4p 59 J 3p 436 J 4p Notes: Mounting orientation: rotation of some devices may be limited. Please consult us. T 1 80 CONNECTION TERMINALS (mm) 80 X
10 MANALL OPERATED CHANGEOER SWITCHES DIMENSIONS A Direct front operation External front operation A F M / / / ø ø 4.5 ø 1. ø Terminal screen. Minimum dimension with shaft extension: 5/ OERALL DIMENSIONS (in) F 3p F 4p SWITCH MONTING (in) CONNECTION TERMINALS (in) OERALL DIMENSIONS (mm) F 3p F 4p SWITCH MONTING (mm) Notes: Mounting orientation: rotation of some devices may be limited. Please consult us CONNECTION TERMINALS (mm) CONNECTION TERMINALS CD 800 A CD 1 A A 31 A ø 5 ø 9 x 16 x 11 ø 0.5 ø 13 ø 0.5 ø 13 ø ø
63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
More informationSIRCO Load break switches for power distribution from 125 to 5000 A
The solution for Load break switches sirco_456_a_1_cat > Main switchboard > Distribution panel > Emergency breaking > Network coupling > Local safety breaking sirco-ac_001_a_1_cat SIRCO 3 x 250 A direct
More informationIDE Load break switches for machine control Remotely trippable switch from 32 to 160 A
The solution for Load break switches > Industry. > Non critical buildings. > Public Access Sites. > High Rise Buildings. ide_021_a_1_cat ide_022_a_1_cat IDE 4x40 A External operation IDE 4x40 A Direct
More informationNon-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
More informationthe Santon FCS-type switch Disconnect Superior Switch Solutions
the Santon FCS-type switch Disconnect Superior Switch Solutions The technical information given in this table applies to 3 and 4 pole fuse combination switches. FRAME SIZE 1 1 2 3 3 4 4a 4b 5 6 6 nominal
More informationPerformance. Standards. Technical data
ilos Loadbreak disconnectors for wall mounting ilos H up to ilos up to 5 ilos 4 0 up to Order codes pplications pprovals / Marking ilos H4 ilos H ddon devices Performance Wall mounting Main disconnector,
More informationNon-Fusible Disconnect Switches
UL 98 and IEC, Non-Fused Switches Mersen s non-fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices that are capable of
More informationFUSERBLOC UL Fusible disconnect switches UL and CSA from 30 to 800 A
Fuse protection The solution for > Motor on-load disconnect > Protection of industrial cabinet > Electrical distribution ul_004_a Strong points fuser-ul_006_a Function FUSERBLOC UL fusible disconnect switches
More informationBulletin 194R Fused and Non-Fused Disconnects Product Selection
Product Selection 4th Pole Modules Maximum Hp Ratings Rated 1-Phase (60 Hz) -Phase (60 Hz) DC Current [A] 1V 240V 240V 480V V 12V V Ref. Non-d 0 2 7. 1 A2 194R-0-NN 60 1 0 40 B2 194R-60-NN UL Class CC
More informationReferences. References. Rating (A) Référence
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION picto_080_c_1_gb Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle acces_128_a_1_cat acces_129_a_1_cat Direct handle
More informationFUSERBLOC LMDC Fuse combination switches FUSERBLOC Live Maintenance DC
Fuse protection The solution for > Live maintenance of speed drives supplied by a common DC bus > Live maintenance of PV inverters connected in parallel on a same circuit fuser-lm_2_a Strong points > Compact
More informationUL 98 Fusible Disconnect Switches
UL 98 Fusible Mersen s fusible disconnect switches are listed to UL 98 and bear the CE mark as conformance to IEC 60947-3. They are service entrance devices capable of fully rated load-break and load-make.
More informationReferences. For front operation. For right side operation. Padlockable in position 0. Handle type. Frame size. Padlockable in position 0 and I
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION Fuse combination switches picto_080_c_1_gb_cat Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle Direct handle acces_147_a_2_cat
More informationSwitch-disconnectors OTDC and OTDCP Switches for photovoltaic applications
Protection and Connection Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications Switch-disconnectors OTDC and OTDCP Switches for photovoltaic applications DC switch-disconnectors
More informationC60PV-DC. IEC / EN e. Main characteristics Operating voltage (Ue) 800 V DC Rated insulation voltage (Ui) 1,000 V DC Breaking capacity (Icu)
DC circuit supplementary protectors for photovoltaic C60PV-DC PB108403-50 The C60PV-DC is a DC circuit breaker dedicated to multi string photovoltaic. This circuit breaker is designed to protect the cables
More informationK1D012ULH cam changeover switch - 2-pole A - screw mounting
Characteristics cam changeover switch - 2-pole - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing
More informationic60n RCBO 30 ma IEC , IEC , AS/NZS
ic60n RCBO 30 ma DB405571 Country approval pictograms IEC 61009-1, IEC 61009-2-2, AS/NZS 61009.1 PB110075-70 b The single-phase ic60n RCBO s self-contained residual current device provides protection of
More informationNF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC1010D0201 28/03/11 NFE-.. / NFZE-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
More informationFAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview
FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview Supplementary Protectors / Miniature Circuit Breakers Page System overview 10/003 10/001 Supplementary protectors
More informationK1D004ACH cam switch - 4-pole A - for Ø 22 mm
Characteristics cam switch - 4-pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing mode Cam
More informationFUSERBLOC UL Fusible disconnect switches UL and CSA 30 to 800 A
Fuse protection The solution for > Motor load break. > Protection of industrial cabinet. > Electrical distribution. ul_004_a Strong points fuser-ul_006_a Function FUSERBLOC UL fusible disconnect switches
More informationSwitch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
More informationBulletin 194R Fused and Non-Fused Disconnects Product Selection
Product Selection 4th Pole Modules Maximum Hp Ratings Rated 1-Phase (60 Hz) -Phase (60 Hz) DC Current [A] 10V 40V 40V 480V V 1V 0V Ref. Cat. No. Non-d 0 7. 1 0 A 194R-0-NN 60 1 0 40 B 194R-60-NN UL Class
More informationK1K015NZ4 cam stepping switch - 2-pole A - screw mounting
Characteristics cam stepping switch - 2-pole - 60-12 A - screw mounting Complementary Number of steps 5 Main Range of product Product or component type Component name [Ith] conventional free air thermal
More informationThe safest way to switch power on and off in your industrial control panels.
The safest way to switch power on and off in your industrial control panels. Your problem: You need a range of disconnect switches for your industrial control requirements ranging from Service Entrance
More informationMULTI-POLE PHOTOVOLTAIC SYSTEMS. COMPACT and MODULAR Housing
MULTI-POLE Lightning Current and Surge Arresters for PHOTOVOLTAIC SYSTEMS Class I / (B+C) and Class II / (C) COMPACT and MODULAR Housing 44 PV ISPRO BS(R) 12,5 The PV ISPRO BS(R) 12,5 series of over voltage
More informationK1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm
Characteristics cam voltmeter switch - 3L and 3L-N - 60-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationSiemens AG SENTRON 3NJ4, 3NJ5 In-Line Fuse Switch Disconnectors up to 2000 A
Switch Disconnectors Introduction Overview All key product features at a glance Compliant with IEC/EN 60439-1, IEC/EN 6094-3 Voltage levels up to 690 V AC Rated operational current from 160 A to 2000 A
More informationVarius SUMMARY OF MODELS OF HRC FUSE-LINKS
SUMMARY OF MODELS OF HRC FUSE-LINKS PNA000 PHNA000 PNA00 PHNA00 Rated current I n up to A up to 0 A up to A up to 0 A Rated voltage U n AC 00 V, 00 V 90 V 00 V 90 V DC 0 V 0 V 0 V 0 V Fuse-link size 000
More informationAllen-Bradley 1492-RCDA4A40
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Suitable for DIN Rail mounting Approval marks are easily visible on dome Terminal design helps
More informationUL 489 DIN Rail Miniature Circuit Breakers
UL 9 DIN Rail Miniature Circuit Breakers Product Overview................................................ Product Selection................................................ Accessories.....................................................
More informationK1B004TLH cam switch - 1 pole A - screw mounting
Characteristics cam switch - 1 pole - 30-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing mode Cam
More information3 Pole Contactors with AC operating coils
1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to
More informationMotor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
More informationUL 489 DIN Rail Miniature Circuit Breakers
UL 489 DIN Rail Miniature Circuit Breakers Product Overview................................................ 2 Product Selection................................................ 4 Accessories.....................................................
More informationMOTOR PROTECTION CIRCUIT BREAKERS
MOTOR PROTECTION CIRCUIT BREAKERS PAGE -2 PAGE -2 SMA Thermal trip adjustment ranges 9-32A (5 choices) Breaking capacity Icu at 400V: 50kA Suitable for mounting in consumer switchboards with minimum 58mm
More informationSentron 3VT circuit breakers Simply Smart: First choice for power distribution
s Sentron 3VT circuit breakers Simply Smart: First choice for power distribution www.siemens.com/industry Sentron 3VT Molded Case Circuit-Breakers - 10-1600Amperes With the standard line of 3VT molded-case
More informationFerrule fuse-links 10x38 gg 400 to 690VAC
Ferrule fuse-links x8 gg 400 to 690VAC Ferrule fuse-links x8 gg 400 to 690VAC LOW VOLTAGE IEC FUSES IEC CYLINDRICAL FUSE-LINKS FEATURES & BENEFITS Reduced size Full range protection Visual indication of
More informationDisconnect Switches. Safe Switching and Disconnecting
IB105-UK_U1_U4_Pfade.indd 2-3 14.04.2005, 16:51:30 Disconnect Switches Safe Switching and Disconnecting Disconnect Switches from Salzer are hand-operated switchgear for main circuits and are offered as
More informationlow voltage GLOBAL CATALOGUE RANGE Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters
CTLOGUE GLOBL RNGE 2. Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters 2. 2. Product Overview. 2.2 Overload Relay Setting Range 2. - 2.8 Product Specifications 2.9-2. Contactor
More informationProtection Equipment
Protection Equipment Price groups 41B, 41E, 41F, 41G, 41H, 41J, 42F, 42J, 143, 401 /2 Introduction Motor starter protectors/ circuit breakers SIRIUS 3RV2 motor starter protectors up to 40 A / General data
More informationLoad-break switches and switch-fuses, safety isolating switches, fuses and fusegear, changeover and transfer switches
Loadbreak switches and switchfuses, safety isolating switches, fuses and fusegear, changeover and transfer switches Socomec Loadbreak switches Loadbreak switches introduction Device types Switching definitions
More informationCircuit Breakers Type CTI 25M, CTI 45MB
Data sheet Circuit Breakers Type CTI 25M, CTI 45MB Circuit breakers for short circuit and overload protection of motor applications cover the current range 0.1 45 A (AC-3 rating). The product range is
More informationDX 3 MCB A / 16 ka 80 A to 125 A (1,5 module per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationComplete UL/CSA Disconnect Switch Kits
Product Selection Complete UL/CSA Disconnect Switch Kits Includes disconnect switch, operating handle with defeater mechanism and operating shaft, NFPA handle, auxiliary contacts, and padlock attachment.
More informationTeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
More informationIssued February DATA SHEET 5SX2 MCB. Based on Siemens Industrial Control Catalog
Issued February 2011 DATA SHEET 5SX2 MCB Based on Siemens Industrial Control Catalog General Data Trip characteristics Tripping characteristics acc. to EN 60 898 Tripping characteristic A, -5 Type A characteristic
More informationModular switch disconnectors and modular change-over switches
Modular switch disconnectors and modular change-over switches Modular switch disconnectors and modular change-over switches The new generation of modular switch disconnectors is guarantee of reliability
More informationTeSys contactors From 115 to 2750 A
Selection guide From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification,
More informationMotors Automation Energy Transmission & Distribution Coatings. DWB Molded Case Circuit Breakers DWB
Motors Automation Energy Transmission & Distribution Coatings DWB Molded Case Circuit Breakers DWB Molded Case Circuit Breakers Molded Case Circuit Breakers DWB Summary Presentation 0 General Characteristics
More informationMiniature Circuit-Breaker IEC Series 8562
> 1 to 3 pole versions > Rated current from 0.5... 40 A > 6 or 10 ka breaking capacity to DI VDE 0641, respectively E 60898 > Isolating Function to E 60947-2 > Permanently set thermal and magnetic trips
More informationK1C024B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Sub-assembly
More informationMotor-protective circuit-breaker, 3p, Ir=16-25A, screw connection. Product range PKZM4 motor protective circuit-breakers up to 65 A
DATASHEET - PKZM4-25 Delivery program Motor-protective circuit-breaker, 3p, Ir=16-25A, screw connection Part no. PKZM4-25 Catalog No. 222352 Eaton Catalog No. XTPR025DC1NL EL-Nummer 0004355158 (Norway)
More informationIndustrial fuses NFC-DIN industrial fuselinks gg and am curves from 0.16 to 1250 A
from 0. to 0 A Fuse protection The solution for > Motor protection > Cable and device protection fusib a cat fusib_0_c cat fusib b cat Strong points gg fuse from 0. to A > High level performances > High
More informationSiemens AG KD Switch Disconnectors SENTRON. Edition December Answers for infrastructure and cities.
KD Switch Disconnectors SENTRON Edition December 01 Answers for infrastructure and cities. Related catalogs Low-Voltage Power Distribution and LV 10 Electrical Installation Technology SENTRON SIVACON ALPHA
More informationFerrule fuse-links 14x51 am 500 to 690VAC
Ferrule fuse-links 4x am 0 to 690VAC Ferrule fuse-links 4x am 0 to 690VAC LOW VOLTAGE IEC FUSES IEC CYLINDRICAL FUSE-LINKS FEATURES & BENEFITS Reduced size Striker version available for remote indication
More informationFerrule fuse-links 22x58 am 500 to 690VAC
Ferrule fuse-links 22x8 am 0 to 690VAC Ferrule fuse-links 22x8 am 0 to 690VAC LOW VOLTAGE IEC FUSES IEC CYLINDRICAL FUSE-LINKS FEATURES & BENEFITS Reduced size Striker version available for remote indication
More informationFor hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact
More informationUL 489 Cable-In / Cable-Out Branch Circuit Breaker
Product Overview UL 9 Cable-In / Cable-Out Branch Circuit Breaker PRODUCT OVERVIEW Optimum and Efficient Protection Features Complete range of UL 9 listed DIN rail mounted miniature circuit breakers up
More informationK1F006ALH cam switch - 6-pole A - screw mounting
Characteristics cam switch - 6-pole - 45-12 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting
More information1.2. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZ Circuit Breaker. UL 489 DIN Rail Miniature Circuit Breakers
.2 WMZ Circuit Breakers Contents Description WMZ Circuit Breaker Standards and Certifications.............. Selection................ Product Selection....................... Accessories...........................
More informationK1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm
Product data sheet Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal
More information1.3. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZS Circuit Breaker. UL 1077 DIN Rail Supplementary Protectors
. Miniature Circuit Breakers and Supplementary Protectors UL 077 DIN Rail Supplementary Protectors WMZS Circuit Breakers Contents Description WMZS Circuit Breaker Standards and Certifications................
More informationContents. Volume 5 Motor Control and Protection CA E December
Rotary Disconnects.4 Contents Description Page Product Description............................. 677 Standards and Certifications...................... 677 Product Selection..............................
More informationCircuit Breakers, Type CTI 25M, CTI 45MB, CTI 100
MAKING MODERN LIVING POSSIBLE Data sheet Circuit Breakers, Type CTI 25M, CTI 45MB, CTI 100 Circuit breakers for short circuit and overload protection of motor applications cover together with the circuit
More informationRW-E. Overloads. Solid-State Overload Relays. Standard Features
RW-E The new RW_E Solid State Overload relays are developed with cutting edge technology according to the most demanding standards worldwide. With its wide current/mp setting; the RW_E OL Relay can be
More information194E FA 32 E P11 P11 6
Bulletin E IEC Load Switches, A Product Selection/Catalog Number Explanation Bulletin E Enclosed Disconnect Load Switches with R Handles (with Defeater, suitable for padlocks) E-FA Painted Steel Enclosure
More informationJtec 10kA Miniature Circuit Breaker
Jtec 0kA Miniature Circuit Breaker EN 60898 The Jtec range has been enthusiastically adopted by a diverse range of customers seeking a cost effective 0kA performance. Jtec MCBs are available in a wide
More informationJ7MN. Ordering Information. Motor Protection Circuit Breaker. Model Number Legend. MPCB system. Options. Motor Protection Circuit Breaker J7MN I-1
Motor Protection Circuit Breaker J7MN ) MPCB system Rotary and switch types Rated operational current 32 A, 63 A and 00 A Switching capacity up to 00 ka/400 V Fixed short-circuit release = 3 x I u Overload
More informationC C CIRCUIT-BREAKERS Moulded-case (MCCB), general. 1. Introduction. 2. General description
CIRCUIT-BREAKERS C C81-21 CIRCUIT-BREAKERS - Contents 1. Introduction 2. General description 3. Rated voltages 3.1 Rated operational voltage (U e ) 3.2 Rated impulse withstand voltage (U imp ) 3.3 Rated
More informationLow voltage. NG to 160 A. Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation.
Low voltage NG160 16 to 160 A Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation Catalogue 2010 NG160 circuit breaker Ready to install NG160 General contents Presentation
More informationNW08 to NW63 fixed circuit breakers Circuit breakers
fixed circuit breakers Circuit breakers DB404362.eps DB404363.eps A Masterpact fixed circuit breaker is described by 4 catalogue numbers corresponding to: b the basic circuit breaker b a control unit b
More information140M C 2 N A63 KN CC GJ
Motor Circuit Protectors Product Overview/Catalog Number Explanation Product Line Overview C-Frame D-Frame F-Frame H-Frame J-Frame L-Frame N-Frame Max. Current I e A A A 00 A 0 A 00 A 00 A Current Rating
More information9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
More informationSurge Protection Devices Ex9UE2
Surge Protection Devices Ex9UE2 Surge Protection Devices Type 2 (Class II, T2, C) Tested according to EN 61643-11 Maximum continuous operational voltage U c from 275 V up to 440 V AC Versions with 1+0,
More information60103 Circuit Breaker
6003 Circuit Breaker United States MINIATURE CIRCUIT BREAKER, 20/240VAC, 2A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Circuit Breaker Type: Standard
More informationMG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
More informationK-Line Mini - Contactors, Overload Relays and Accessories
K-Line Mini - Contactors, Overload Relays and Accessories Class 8502 CONTENTS Description...................................................... Page General Information...............................................
More informationLV power circuit breaker and switch-disconnectors. Masterpact NW Direct current 1000 to 4000 A. Catalogue
LV power circuit breaker and switch-disconnectors Masterpact NW Direct current 1000 to 4000 A Catalogue 2002 Get more with the world s Power & Control specialist Masterpact NW General contents Presentation
More informationK1D011B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 30-12 A - for Ø 22 mm Complementary Main Number of decimal 11 Switching angle 30 Range of product Product or component type Component name
More information140M C 2 E A63 KN CC GJ
Motor Protection Circuit Breakers Catalog Number Explanation Cat. No. Explanation Examples given in this section are for reference purposes. This basic explanation should not be used for product selection;
More informationsirius Switching. Protecting. Starting. SIRIUS Product Overview
sirius Switching. Protecting. Starting. SIRIUS Product Overview S00 Design Direct-on-line starting Reversing duty Assembly kit for busbar mounting 0 mm: RA9 -C 0 mm: RA9 -D Consisting of: wiring kit busbar
More informationMini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
More informationClose Protection from Moeller. miniature branch circuit breakers miniature supplementary protectors
Close Protection from Moeller miniature branch circuit breakers miniature supplementary protectors FAZ branch circuit breakers General Information... Selection Tables Trip Characteristic C - Box terminals...
More informationProduct Guide. UL 489 DIN rail miniature circuit breakers
Product Guide UL 489 DIN rail miniature circuit breakers UL 489 DIN rail miniature circuit breakers Product Overview................................................ 2 Product Selection WMZT 10 kaic at
More information5/2 Product overview. 5/3 Distribution board components. 5/9 Built-in components. 5/17 Mounting components 5. Siemens ET B1 10/2009
Siemens AG 9 BETA Protecting SR Busbar Systems /2 Product overview /3 Distribution board components /9 Built-in components /17 Mounting components Siemens ET B1 10/9 BETA Protecting SR Busbar Systems Siemens
More informationNH fuse-links gg VAC with striker size 0, 1, 2, 3, 4
NH fuse-links gg - 690VAC LOW VOLTAGE IEC FUSES IEC NH FUSE-LINKS FEATURES & BENEFITS Dimensions according to DIN 43 620 Parts 1 to 4 Lead free contact blades 0% cadmium APPLICATIONS gg: General purpose
More informationFUSERBLOC from 30 to 800 A
from 30 to 800 Product presentation FB30DT FB30SO Ferraz Shawmut FUSERBLO disconnect switches are extremely durable, manually operated, fusible disconnect switches. The switches employ double break contacts
More information3RA13, 3RA14 Contactor Assemblies
RA1, RA Contactor Assemblies RA1 complete units,... kw Overview The RA1 reversing contactor assemblies can be ordered as follows: Sizes S00 to S Fully wired and tested, with mechanical and electrical interlock
More informationCI-tronic Reversing contactor Type RCI
Data sheet CI-tronic Reversing contactor Type RCI RCI reversing contactors are designed for demanding forward/reverse control of three-phase AC motors. The zero cross switching method ensures very fast
More informationApproved Standards. Motor Protection Circuit Breaker (MPCB) J7MN. MPCB system (motor protection CLASS 10) Auxiliary contact modules.
Motor Protection Circuit Breaker (MPCB) J7MN MPCB system (motor protection CLSS 0) Rotary and switch types Rated operational current = 2, 25, 50 and 00 Switching capacity up to 2.5 = 00 k/400 V Fixed short-circuit
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationAThink future. Switch to green. Mini Panel Board. Cost-effective, space-saving board up to 400A.
www.moeller.co.uk Mini Panel Board Cost-effective, space-saving board up to 400A Product Catalogue and Selection Guide Mini Panel Board Miniature Circuit Breakers Moulded Case Circuit Breakers XBoard Consumer
More informationSafety switches with manual mechanical delay and separate actuator
Safety switches with manual mechanical delay and separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS short knob 20 seconds MECHANICAL DELAY C L05 L L20 long
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More informationManual Motor Control Switches and Disconnects
Manual Motor Control Switches and Disconnects Vario, GS1, GS2, and LK4 9421CT0301R09/12 2013 CONTENTS Description............................................. Page Mini-VARIO and VARIO Manual Motor Control
More informationApplication Switchgear for industrial and advanced commercial applications. U e V AC 277/480 Y V DC 60
DATASHEET - FAZ-C5/2-RT Miniature circuit breaker (MCB), 5A, 2p, C-Char, AC Part no. FAZ-C5/2-RT Catalog No. 102203 Eaton Catalog No. FAZ-C5/2-RT EL-Nummer 1691799 (Norway) Similar to illustration Delivery
More informationSwitches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
More informationMini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protectors Specifications Bulletin Number 1492, 1692
Technical Data Mini Circuit Breakers, Fuse Blocks, and Electronic Circuit Protectors Specifications Bulletin Number 1492, 1692 Topic Page 1489-M Miniature Circuit Breakers 1 1492-SP Supplementary Protectors
More information