VW2110 Vibrating Wire Readout Calibrator Manual
|
|
- Annabelle Jordan
- 5 years ago
- Views:
Transcription
1 VW2110 Vibrating Wire Readout Calibrator Manual All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the information at any time and assumes no liability for its accuracy. Copyright RST Instruments Ltd. All rights reserved. Document Number: ELM0065 A Release Date: June 18, 2018 ELM0065 A
2 TABLE OF CONTENTS 1 INTRODUCTION OPERATION Connecting a Vibrating Wire Readout Instrument Powering On the VW View VW2110 Details Adjust Desired Units Turn the Backlight On/Off View Battery Information Changing the Date and Time Auto Power Off and Auto Backlight Off Power Down the VW BATTERIES DIAGNOSTICS SERVICE AND REPAIR APPENDIX A VW2110 MENU FLOW CHART LIST OF FIGURES Figure 1-1 VW2110 Vibrating Wire Readout Calibrator... 3 Figure 2-1 Loosened Binding Posts... 4 Figure 2-2 Wires connected to the Binding Posts... 5 Figure 2-3 Default Reading Screen... 5 Figure 2-4 VW2110 Details... 6 Figure 2-5 Adjusting Frequency Units... 6 Figure 2-6 Battery Information... 7 Figure 2-7 Set Time... 7 Figure 2-8 Set Date and Time... 8 Figure 2-9 Auto Off... 8 Figure 2-10 Auto Power Off... 9 Figure 2-11 Auto Backlight Off... 9 Figure 2-12 Power Off... 9 Figure 3-1 Battery Port Figure A-1 VW2110 Menu Flow Chart LIST OF TABLES Table 2-1 Terminal Connections... 4 ELM0065 A RST Instruments Ltd. Page ii
3 1 INTRODUCTION The VW2110 Vibrating Wire Readout Calibrator provides a means of independently checking vibrating wire readouts and loggers. The lightweight, rugged design is suited for harsh environmental conditions often encountered in the field. A high-level signal is provided via a BNC connector to permit the calibrator itself to be checked with a precision frequency counter. The VW2110 provides readout traceability for ISO9001 and other quality management systems. Field-replaceable AA alkaline batteries eliminate the need for a large, bulky 12 V battery and a charger. Note that the VW2110 is not intended for calibration of the CS AVW200 series, as their measurement method is not compatible with the VW2110. FIGURE 1-1 A. USB Connector B. BNC Connector C. Binding Posts D. Backlight E. Escape VW2110 VIBRATING WIRE READOUT CALIBRATOR F. Scroll Up G. Scroll Down H. Enter I. Large Character LCD Display ELM0065 A RST Instruments Ltd. Page 3
4 2 OPERATION 2.1 CONNECTING A VIBRATING WIRE READOUT INSTRUMENT TABLE 2-1 TERMINAL CONNECTIONS Terminal ID Wire Colour C1 C2 Red Black 1 Loosen the binding posts by turning them counter clockwise. The holes within the binding posts should be exposed. Refer to Figure 2-1. FIGURE 2-1 LOOSENED BINDING POSTS 2 Take the wire from the instrument to be calibrated and insert it into the holes of the binding posts. Refer to Table 2-1. Ensure the correct wires are in the binding posts. 3 Rotate the binding posts clockwise until finger tight. Ensure the exposed wires are making contact with the metal of the binding posts. Do not clamp the wire jacket into the binding posts. CAUTION: ENSURE THAT ONLY THE EXPOSED WIRES ARE PLACED WITHIN THE BINDING POSTS. DO NOT CLAMP THE WIRE JACKET INTO THE BINDING POSTS. ELM0065 A RST Instruments Ltd. Page 4
5 FIGURE 2-2 WIRES CONNECTED TO THE BINDING POSTS Banana plugs (from voltmeters or multimeters) may also be connected directly into the top of the binding posts. 2.2 POWERING ON THE VW2110 The VW2110 readout calibrator can be powered on by pressing any button. Once powered on, the default reading screen will appear as shown in Figure 2-3. The default units are B units (f 2 x 10-3 ) and Hertz B Hz FIGURE 2-3 DEFAULT READING SCREEN 2.3 VIEW VW2110 DETAILS Upon powering on the unit, the opening screen will appear showing the RST Instruments logo. ELM0065 A RST Instruments Ltd. Page 5
6 Press any key within 5 seconds of powering on the VW2110 to view details of the VW2110 readout calibrator. RST Instruments VW2110 Calibrator Firmware: 2.00 BoardRev: 2.0 Serial#: /06/15 15:04:05 FIGURE 2-4 VW2110 DETAILS The screen will display the model, firmware number, board rev number, instrument serial number, and the date and time. Ensure that the date and time are correct. If no keys are pressed after powering the unit on, the unit will display the default screen as shown in Figure ADJUST DESIRED UNITS The default frequency unit may be adjusted by pressing ENTER on the default reading screen. Refer to Figure 2-5. Frequency Units Hertz >B Units FIGURE 2-5 ADJUSTING FREQUENCY UNITS Use the Up/Down buttons to select the desired frequency unit. Press ENTER to confirm selection. Selecting Hertz will bring up another screen that will allow you to choose Hertz frequency increment of 10 Hz, 100 Hz, 1000 Hz. Use the Up/Down buttons to select the desired increment. Press ENTER to confirm selection. Press ESC to go back to the default reading screen. The main display on the VW2110 will display B-units. The range is Hz. The desired B-units may be selected by pressing the Up/Down buttons. The B- units will move in 100 increments. Hz will adjust automatically as B-units are adjusted. ELM0065 A RST Instruments Ltd. Page 6
7 2.5 TURN THE BACKLIGHT ON/OFF Press the Backlight button to toggle the backlight on or off. The backlight has an auto off feature. Refer to Section 2.8 to adjust the auto backlight off time. 2.6 VIEW BATTERY INFORMATION From the default screen, press ESC and then use the Up/Down buttons to scroll to the battery information screen. The percentage remaining on the battery and volts will be displayed. Refer to Figure 2-6. Battery 98% 4.6 Volts FIGURE 2-6 BATTERY INFORMATION 2.7 CHANGING THE DATE AND TIME From the default screen, press ESC and then use the Up/Down buttons to scroll to Set Time. Refer to Figure Jun 15 15:28:44 Set Time FIGURE 2-7 SET TIME Press ENTER to edit the date and time. Refer to Figure 2-8. ELM0065 A RST Instruments Ltd. Page 7
8 Set Data Time 2018 Jun 15 15:31:22 Fri FIGURE 2-8 SET DATE AND TIME The current editable data field will be underlined. Use the Up/Down buttons to modify the field and press ENTER when complete. Pressing ENTER cycles through each field. The program will return to the Set Time screen when all data fields have been cycled through. 2.8 AUTO POWER OFF AND AUTO BACKLIGHT OFF The unit can be powered off manually or automatically. Note that the auto power off features is always active and cannot be disabled to conserve battery life. The default auto power off time is 5 minutes. To power off automatically, from the default screen, press ESC and then use the Up/Down buttons to navigate to Auto Off. Refer to Figure 2-9. Auto Off FIGURE 2-9 AUTO OFF Press Enter to edit the auto off time. Use the Up/Down buttons to cycle between the options of 5, 15, 30, 45, and 60 minutes. Press Enter to select desired time for auto power off. ELM0065 A RST Instruments Ltd. Page 8
9 Auto Power Off 5 Minutes FIGURE 2-10 AUTO POWER OFF The next option will be Auto Backlight Off. Use the Up/Down buttons to cycle between the options of 5, 15, 30, 60, and 99 seconds. Auto Backlight Off 10 Seconds FIGURE 2-11 AUTO BACKLIGHT OFF Press Enter to select the desired time for auto backlight off. 2.9 POWER DOWN THE VW2110 The unit can be powered off manually. 4 From the default screen, press ESC once. The screen should display Power Off. Refer to Figure Power Off FIGURE 2-12 POWER OFF 5 Press ENTER. The VW2110 will now power off. Press ESC instead to return to the default screen. ELM0065 A RST Instruments Ltd. Page 9
10 3 BATTERIES The VW2110 operates on 3 alkaline AA batteries. This eliminates the need for a charger. Access to the batteries is done through a port on the side of the unit. Refer to Figure 3-1. FIGURE 3-1 BATTERY PORT Use a flathead screwdriver or a coin to access the battery port. If the VW2110 unit is being used consistently in cold environments, the user may replace the alkaline batteries with lithium batteries, which are also readily available. Refer to Section 2.6 for battery information. NOTE: IF THE BATTERY VOLTAGE DROPS BELOW 3.5 VOLTS, A LOW BATTERY WARNING WILL BE DISPLAYED IN THE FORM OF BATT IN THE UPPER RIGHT OF EACH SCREEN. CHANGE THE BATTERIES AT THIS TIME. 4 DIAGNOSTICS The VW2110 Readout Calibrator may be verified using a precision frequency counter. The BNC connector provides a high level signal. ELM0065 A RST Instruments Ltd. Page 10
11 5 SERVICE AND REPAIR The product contains no user-serviceable parts. Contact RST for product service or repair not covered in this manual. ELM0065 A RST Instruments Ltd. Page 11
12 Appendix A VW2110 MENU FLOW CHART The following flow chart outlines all functions of the VW2110 front panel controls: FIGURE A-1 VW2110 MENU FLOW CHART ELM0065 A RST Instruments Ltd. Page 12
VW2106 VW Readout Manual
VW2106 VW Readout Manual All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the information
More informationRST INSTRUMENTS LTD.
VW2106 VW Readout Instruction Manual 1 RST INSTRUMENTS LTD. VW2106 VW Readout Instruction Manual Ltd. 11545 Kingston St Maple Ridge, BC Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005 e-mail: info@rstinstruments.com
More informationRST INSTRUMENTS LTD.
Carlson/RST MA-7 Readout Instruction Manual 1 RST INSTRUMENTS LTD. Carlson/RST MA-7 Readout Instruction Manual Ltd. 11545 Kingston St Maple Ridge, BC Canada V2X 0Z5 Tel: (604) 540-1100 Fax: (604) 540-1005
More informationPIECAL 322 Automated Thermocouple Calibrator Operating Instructions. Product Description. Practical Instrument Electronics
PIECAL 322 Automated Thermocouple Calibrator Operating Instructions Product Description Easy to use With the PIECAL 322-1 you can check & calibrate all your thermocouple instruments and measure thermocouple
More informationPIECAL 520B & 521B Thermocouple Source Operating Instructions
PIECAL 520B & 521B Thermocouple Source Operating Instructions (Shown without optional boot) Product Description (Shown with optional boot) Easy to use With the PIECAL 520B/521B you can check & calibrate
More informationOperating Manual. for HXOC Page 1 of 5
Operating Manual for HXOC-003-000-02 Page 1 of 5 ESM PROGRAMMER: OPERATING MANUAL This handheld programming device is designed for setting the two selectable operating speeds available on the ebm-papst
More informationDFS Series User s Manual (5N-1000N Capacity)
DFS Series User s Manual (5N-1000N Capacity) REV 3.8 Table of Contents Table of Contents 2 Introduction 3 Before Use 3 Operation Overview 4 Powering the DFS 5 Using the DFS. 6 Fitting Accessories 6 Mounting
More informationVibrating Wire Joint Meter Manual
Vibrating Wire Joint Meter Manual All efforts have been made to ensure the accuracy and completeness of the information contained in this document. RST Instruments Ltd reserves the right to change the
More informationPIECAL 510B/511B RTD Simulator Operating Instructions
PIECAL 510B/511B RTD Simulator Operating Instructions (Shown without optional boot) (Shown with optional boot) Product Description Easy to use With the PIECAL 510B/511B you can check & calibrate all your
More informationUser's Guide. Vibration Meter and Laser Combination Tachometer Model
User's Guide Vibration Meter and Laser Combination Tachometer Model 461880 Introduction Congratulations on your purchase of the Extech 461880 Vibration Meter and Combination Laser Tachometer. The 461880
More informationINTERFACE & SOFTWARE GUIDE
TM INTERFACE & SOFTWARE GUIDE Wireless Remote Display USB Converter Battery Sensor Setup DataLogger Software r e m o t e i n t e r f a c e escape enter status w w w. s k y s t r e a m e n e r g y. c o
More informationDTT Series Digital Torque Testers User Manual
for DTT Models above Serial Number: 2000 15700 S. Waterloo Road Cleveland, OH 44110-3898 Phone: (888) 486-6163 Fax: (216) 481-4519 2017 Jergens, Inc. All Rights Reserved Revision Date: 02/19/18 Email:
More informationHandheld Laser Particle Counter. Model: P311. Operation Manual. Ver: 1.50 AIRY TECHNOLOGY INC
Handheld Laser Particle Counter Model: P311 Operation Manual Ver: 1.5 AIRY TECHNOLOGY INC 1 Warranty AIRY TECHNOLOGY INC warrants to the original user that this instrument shall be free from defects in
More informationHeavy Duty Vibration Meter
User Guide Heavy Duty Vibration Meter Model 407860 Introduction Congratulations on your purchase of the Extech 407860 Vibration Meter. The Model 407860 measures vibration levels in industrial machinery.
More informationI. PANEL DESCRIPTION... 1
Table of Contents I. PANEL DESCRIPTION... 1 II. OPERATING INSTRUCTION... 7 1. MA OUTPUT... 7 1A. GENERAL OPERATION 4-20MA... 7 1B. SELECT 0-20MA OR 0-24MA... 8 1C. ENTER A VALUE LESS THAN 1... 9 2. % (PERCENTAGE)
More informationDTT-L Series Digital Torque Testers User Manual
15700 S. Waterloo Road Cleveland, OH 44110-3898 Phone: (888) 486-6163 Fax: (216) 481-4519 2017 Jergens, Inc. All Rights Reserved Revision Date: 02/19/18 Email: asginfo@asg-jergens.com Web: www.asg-jergens.com
More informationCopyright [W.L. Walker Co., Inc.]. All Rights Reserved
Copyright [W.L. Walker Co., Inc.]. All Rights Reserved Operating the MKIIs For units originally equipped with bonding straps: To reduce the risk of fire or explosion, this device must be bonded according
More informationModel ST-FT1 DIGITAL FORCE / TORQUE INDICATOR. User s Guide
Model ST-FT1 DIGITAL FORCE / TORQUE INDICATOR Thank you Thank you for purchasing a Mesa Labs Model ST-FT1 digital force / torque indicator, designed for use with a remote torque sensor. With proper usage,
More information2 Product Overview. 5 User Interface. 14 Logging Data. 17 Viewing Data. 19 Managing Data. 24 Device Settings. 26 Specifications.
TITAN S8 Portable Data Acquisition Logger PRODUCT USER GUIDE To view the full MadgeTech product line, visit our website at madgetech.com. TABLE OF CONTENTS 2 Product Overview 5 User Interface 14 Logging
More informationVibration Meter and Laser Combination Tachometer
User's Guide Vibration Meter and Laser Combination Tachometer Model 461880 Introduction Congratulations on your purchase of the Extech 461880 Vibration Meter and Combination Laser Tachometer. The 461880
More informationBEP 600-ACSM AC SYSTEMS MONITOR. Installation and Operating Instructions. Page 1
BEP 600-ACSM AC SYSTEMS MONITOR Installation and Operating Instructions Page 1 This page has been deliberately left blank Page 2 Table of Contents 1. BASICS 4 WARNING AND CAUTION 4 WARNING 4 CAUTION 4
More information5 Performance Verification
5 Performance Verification Performance Verification TEST EQUIPMENT REQUIRED This procedure can be used to verify the warranted characteristics of the CP015 Current Probe. The recommended calibration interval
More informationHOBO Motor On/Off Data Logger (UX90-004x) Manual
HOBO Motor On/Off Data Logger (UX90-004x) Manual The HOBO Motor On/Off data logger records motor on and off conditions by detecting the AC magnetic fields given off by a rotating motor using its internal
More informationMultifunction Calibrator
Multifunction Calibrator Model CL TC - - - C V _ TECPEL CO., LTD. Features:. - (KΩ load, V Loop Supply). -.,-.V, -.V. K, J, E, T Thermocouple ( C and ). Frequency -.. Basic Accuracy. Easy Key-pad Operation.
More informationINSTRUCTION MANUAL C WA2 WELD ANALYZER
INSTRUCTION MANUAL 700215C WA2 WELD ANALYZER MICROPROCESSOR BASED Monitors ENTRON Controls, LLC. 1402 S. Batesville Road Greer, South Carolina 29650 (864) 416-0190 FAX: (864) 416-0195 www.entroncontrols.com
More informationHeavy Duty Vibration Meter
USER MANUAL Heavy Duty Vibration Meter Model 407860 Additional User Manual Translations available at www.extech.com Introduction Congratulations on your purchase of the Extech 407860 Vibration Meter. The
More informationUser Manual. Single-Input Thermometers. with NIST-Traceable Calibration. Thermocouple Meter, Type J/K/T Input Model
User Manual Single-Input Thermometers with NIST-Traceable Calibration Thermocouple Meter, Type J/K/T Input Model 20250-91 Thermistor Meter Model 20250-93 RTD Meter Model 20250-95 THE STANDARD IN PRECISION
More informationINSTRUCTION and OPERATIONS MANUAL. for
INSTRUCTION and OPERATIONS MANUAL for CAB SIGNAL MASTER MODEL NUMBER 15100-00 CAUTION Be sure to read and become thoroughly familiar with the entire contents of this manual before attempting to operate
More informationSturtevant Richmont. Operating Instructions 3000-Series Exacta 2 Digital Torque Wrenches (All Models)
Sturtevant Richmont Global Reach. Local Support. Division of Ryeson Corporation 3203 N. Wolf Road Franklin Park, IL 60131 Phone: 847/455-8677 800/877-1347 Fax: 847/455-0347 Website: www.srtorque.com E-mail:
More informationBF ENTRON LTD. Monitoring equipment. Weld Analyser WA2
BF ENTRON LTD. Monitoring equipment Weld Analyser WA2 M O N I T O R I N G E Q U I P M E N T Weld Analyser WA2 BF ENTRON Ltd. Building 80 The Pensnett Estate Kingswinford West Midlands DY6 7FQ Phone +44
More informationProfessional Thermocouple Thermometer with Four Type K Inputs, Data Logging, and Optional Infrared Wand
User Manual Professional Thermocouple Thermometer with Four Type K Inputs, Data Logging, and Optional Infrared Wand with NIST-Traceable Calibration Model 20250-20 Enter REC DIF THE STANDARD IN PRECISION
More informationMANUAL PCE-123
www.pce-industrial-needs.com Tursdale Technical Services Ltd Unit N12B Tursdale Business Park Co. Durham DH6 5PG United Kingdom Phone: +44 ( 0 ) 191 377 3398 Fax: +44 ( 0 ) 191 377 3357 info@tursdaletechnicalservices.co.uk
More informationAGATE TECHNOLOGY AT-2030 OPERATORS MANUAL
AGATE TECHNOLOGY AT-2030 OPERATORS MANUAL PORTABLE VIBRATION CALIBRATOR 760-215-9670 info@agatetechnology.com www.agatetechnology.com Introduction: This manual is intended to inform the operating user
More informationUser Manual. Dual-Input Data Logging Thermometers. with NIST-Traceable Calibration. Thermocouple Meter, Type J/K/T Input Model
User Manual Dual-Input Data Logging Thermometers with NIST-Traceable Calibration Thermocouple Meter, Type J/K/T Input Model 20250-92 Thermistor Meter Model 20250-94 RTD Meter Model 20250-96 THE STANDARD
More informationUser Manual Video Borescope Model
User Manual Video Borescope Model 20250-27 THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi-Sense Video Borescope (Model 20250-27) is ideal for the inspection of ductwork, wiring locations,
More informationCP AL1. User Manual FFT VOLTMETER FOR STEP AND TOUCH VOLTAGE MEASUREMENTS
CP AL1 User Manual FFT VOLTMETER FOR STEP AND TOUCH VOLTAGE MEASUREMENTS CP AL1 User Manual Manual Version: CPAL1.AE.1 OMICRON electronics 2007. All rights reserved. This User Manual is a publication of
More informationARA FTS Flow Calibrator. Operation Manual August 1, 2016
ARA FTS Flow Calibrator Operation Manual August 1, 2016 TABLE OF CONTENTS SECTION PAGE 1. INTRODUCTION 1 2. GETTING STARTED 1 2.1. Navigation 1 2.2. Charge Battery 1 2.3. Set Date and Time 2 2.4. Plug-In
More informationPower Prowler USER MANUAL PLR In-1 DMM/TDR Cable Fault Finder for Energized and Unenergized Cables.
TM Power Prowler USER MANUAL 3-In-1 DMM/TDR Cable Fault Finder for Energized and Unenergized Cables PLR600 Revison 08/19/13 www.t3innovation.com TM Power Prowler 3-In-1 DMM/TDR Cable Fault Finder for Energized
More informationMONARCH INSTRUMENT. TACH-4A / TACH-4AR Programmable Optical Tachometer. Instruction Manual Rev 2.0
MONARCH INSTRUMENT Instruction Manual TACH-4A / TACH-4AR Programmable Optical Tachometer 1071-4850-001 Rev 2.0 15 Columbia Drive Amherst, NH 03031 E-Mail: Support@MonarchInstrument.com Phone: (603) 883-3390
More informationUser Manual. Single-Input Thermometers. with NIST-Traceable Calibration. Thermocouple Meter, Type J/K/T Input Model
User Manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Single-Input Thermometers with NIST-Traceable Calibration Thermocouple
More informationTITAN S8. Portable Data Acquisition Logger. Product User Guide
TITAN S8 Portable Data Acquisition Logger Product User Guide Table of Contents 2 General Features... 3 Device Overview... 3 External Features... 3 Device Orientation... 4 Device Inputs... 5 Sensor Types
More informationNIDEC-SHIMPO INSTRUMENTS
TTR Torque Tool Tester Operation Manual NIDEC-SHIMPO INSTRUMENTS 1) Overloading the transducer does not only damage the transducer but may break the transducer head and could result in injury! 2) Torque
More informationModel BS-150. Instruction Manual. Video Inspection Camera. reedinstruments. www. com
Model BS-150 Video Inspection Camera Instruction Manual reedinstruments com Table of Contents Safety... 2 Features... 3 Specifications...3-4 Instrument Description... 5 Operating Instructions...6-8 Safety
More informationHandheld hydraulic readouts & dataloggers
Handheld hydraulic readouts & dataloggers Automatic sensor recognition Sensor Recognition (SR) Sensors use an analogue signal and can be plugged into any suitable input of an HPM handset, which will automatically
More informationWARNING: Do not use the thermometer/data logger before you read the users manual and the following instructions.
55 This unit passes the following tests EN 61326-1:2006 (CISPR11,IEC/EN 61000-3-2:2006, IEC/EN 61000-3-3: 1995+A1 :2001+A2:2005 IEC/EN 61000-4-2/-3/-5/-6/-11) WARNING: Do not use the thermometer/data logger
More information*E * E E0606
75000 SERIES B Instrument BASIC Installation Note Copyright Agilent Technologies, Inc., 1990-2006 *E1300-90020* E1300-90020 E0606 Manual Part Number: E1300-90020 Printed: June 2006 Edition 1 Rev 2 Microfiche
More informationIP 20. Rated. with terminals
PROGRAMMABLE Special product features D ATA POWER fr o m 32MB S T O R A G E U S B DATA LOGGERS Two-Channel DC Voltage, Current, Pulse & Event Model L452 Bluetooth-enabled logger and event counter that
More informationOperating Instructions
Bracken Hill South West Industrial Estate Peterlee Co Durham SR8 2SW ENGLAND Tel: +44(0)191 5863511 www.seaward.co.uk sales@seaward.co.uk service@seaward.co.uk Part Number 344A550 Revision 1 2006 Seaward
More informationMODEL 4084 CANARY 4 MANUAL SEPT health physics instruments. Division of Far West Technology
MODEL 4084 CANARY 4 MANUAL SEPT 1994 health physics instruments 330 D South Kellogg Ave Goleta, CA 93117 Tel 805.964.3615 FAX 805.964.3162 Division of Far West Technology I. INTRODUCTION The Model 4084
More informationSD Model. Instruction Manual. Sound Level Meter/ Data logger. reedinstruments. www. com
Model SD-4023 Sound Level Meter/ Data logger Instruction Manual www com Table of Contents Features... 3 Specifications...4-5 Instrument Description... 6 Operating Instructions...7-11 Function Selection...
More informationModel BS-150. Instruction Manual. Video Inspection Camera. reedinstruments www.
Model BS-150 Video Inspection Camera Instruction Manual reedinstruments www com Table of Contents Safety... 2 Features... 3 Specifications...3-4 Instrument Description... 5 Operating Instructions...6-8
More informationHandheld hydraulic readouts & dataloggers
Handheld hydraulic readouts & dataloggers Automatic sensor recognition Sensor Recognition (SR) Sensors use an analogue signal and can be plugged into any suitable input of an HPM handset, which will automatically
More information4-20/10-50 ma/v Loop Calibrator
Model 535 4-20/10-50 ma/v Loop Calibrator Practical Instrument Electronics Operating Instructions Basic Keypad Operations j EZ-Check Switch/EZ-Step Pushbutton Slide the switch to select the user stored
More informationPro-HD Model E. Troubleshooting Guide. ProHD chargers with a serial number that begins with an E are model E systems. Example:
Pro-HD Model E Troubleshooting Guide ProHD chargers with a serial number that begins with an E are model E systems. Example: WARNING: During these troubleshooting tests the system can be plugged in and
More informationSpecification for Portable Laptop Battery Detector
Basic Parameters Specification for Portable Laptop Battery Detector Dimensions: 206 x 140 x 66 mm Unit weight: 320 g Input voltage: DC 19V Maximum charge current for each channel: 3A Display way: Large
More informationOperating Instructions
PRIMETEST 100 PRIMETEST 100 Bracken Hill South West Industrial Estate Peterlee Co Durham SR8 2SW ENGLAND Tel: +44(0)191 5863511 www.seaward.co.uk sales@seaward.co.uk service@seaward.co.uk Part Number
More informationS-14 S-14. Compact Digital Multimeter. Compact Digital Multimeter
S-14 Compact Digital Multimeter S-14 Compact Digital Multimeter SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation at this meter
More informationFloTech FT555 Series Automatic Truck Overfill System Tester
FloTech FT555 Series Automatic Truck Overfill System Tester Optic Systems Thermistor Systems Ground Bolt TIM Module 10784PA REV F Dixon Dixon Bayco Division Cincinnati, Ohio Table of Contents Table of
More informationDFI 9000 PORTABLE DIGITAL INDICATOR USER S GUIDE
DFI 9000 PORTABLE DIGITAL INDICATOR USER S GUIDE www.cooperinstruments.com PH: 540-349-4746 FAX: 540-347-4755 CONTENTS 1.0 INTRODUCTION...1 2.0 SETUP AND USE...1 2.1 Your DFI 9000...1 2.2 Additional Tools...1
More informationAEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9310/9350/9510/9550/9500 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9310/9350/9510/9550/9500 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Portable Airborne Particle Counter (particle counter). This guide will
More informationOPERATING INSTRUCTION
OPERATING INSTRUCTION AUTORANGING MULTIMETER MAX Ω F C 10A MAX every 15 min. COM V SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation
More informationUSER MANUAL. IST channel speed calibrator
Page 1 of 19 USER MANUAL IST-101 3 channel speed calibrator Publication Number: IST-101-A03-MAN Edition: 08-12-2014 This manual is applicable for all calibrators with model number: IST101-A03-XXX Copyright
More informationUser Manual VX4234 Digital Multimeter Module
User Manual VX4234 Digital Multimeter Module 070-9139-02 This document applies for firmware version 1.00 and above. General Safety Summary Review the following safety precautions to avoid injury and
More informationWebtec Products Limited. Handheld hydraulic readouts & dataloggers
Webtec Products Limited Handheld hydraulic readouts & dataloggers Automatic sensor recognition Sensor Recognition (SR) Sensors use an analogue signal and can be plugged into any suitable input of an HPM
More informationNet-Ritef Continuity and Wiremap Tester Trace-Ritef Tone Generator and Amplified Tone Tracer User's Guide.
Net-Ritef Continuity and Wiremap Tester Trace-Ritef Tone Generator and Amplified Tone Tracer User's Guide www.jdsu.com/know Voltage Probe Tracer/Power Button Volume Up/Down Indicator LED Power/Tone Type
More informationT0046 PROFESSIONAL LAN CABLE TESTER USER GUIDE
T0046 PROFESSIONAL LAN CABLE TESTER USER GUIDE INDEX 1. Interfaces and Controls...1 2. Power On...2 3. Setup...2 3.1 To set the UNIT...3 3.2 To set the LAN Length Adjustment...3 3.3 To set the COAX Length
More information1. Introduction 2. Specifications 3. Symbol Definition and Button Location 4. Operation Instructions 5. Temperature Measurement 6.
CONTENTS TITLE PAGE 1. Introduction.. 1 2. Specifications... 1 3. Symbol Definition and Button Location... 2 4. Operation Instructions.... 3 4.1 Power-Up...3 4.2 Connection of the Temperature Probe...
More informationSECURITEST USER S MANUAL TABLE OF CONTENTS SAFETY PRECAUTIONS SAFETY INFORMATION... 2 WARNINGS... 28
SECURITEST USER S MANUAL TABLE OF CONTENTS SAFETY PRECAUTIONS...... 1 1. SAFETY INFORMATION...... 2 WARNINGS...... 2 SAFETY INFORMATION..... 3 BATTERY PRECAUTIONS...... 5 2. INTRODUCTION...... 7 FEATURES......
More informationKI6501 Optical CWDM Power Meter. User Manual. KI6501 series Optical CWDM Power Meter
User Manual KI6501 series Optical CWDM Power Meter Warranty: Information in this manual is given in good faith for the benefit of the user. It cannot be used as the basis for claims against Kingfisher
More informationINTRODUCTION INCLUDES
Hybrid RANGEFINDER INTRODUCTION The Callaway Hybrid Rangefinder combines the pin-seeking precision of a laser with the added convenience of a GPS all in one compact device! Whether trying to carry a bunker
More informationPortable equipment N130/N330 QUICK GUIDE BASIC OPERATIONS
Portable equipment N130/N330 QUICK GUIDE BASIC OPERATIONS Instruments overview N330 Ports for sensors, power supply and USB CONNECTION PORTS 5 4 3 2 1 Connector 1: sensor Channel A input Connector 2: sensor
More informationThe 5700A/5720A High Performance Multifunction Calibrators. Taking Accuracy to a Whole New Level
The 5700A/5720A High Performance Multifunction Calibrators Taking Accuracy to a Whole New Level The 5700A/5720A Calibrators Set the Highest Standards for Accuracy and Performance Growing global trade is
More informationSKF Thermal Camera TKTI 21 & 31
SKF Thermal Camera TKTI 21 & 31 Quick Start guide 1. Camera Description 3.5 Colour display Connectors Infrared hatch Camera lens Digital Camera lens Status LED Control Buttons Microphone Battery door Laser
More informationModel 6812 VOLUME FLOW ANEMOMETER. User Manual. Kanomax USA, Inc. 219 Route 206 PO Box 372. Andover, NJ USA. (800) Fax: (973)
Kanomax USA, Inc. 219 Route 206 PO Box 372 Andover, New Jersey 07821 USA (800) 247-8887 Fax: (973) 786-7586 Model 6812 VOLUME FLOW ANEMOMETER User Manual www.kanomax-usa.com Copyright 2008, Kanomax USA,
More informationTrend-1 Vibration Data Logger. User Manual
Trend-1 Vibration Data Logger User Manual Copyright College of Engineering-University of Basrah 2013 1 1. General Specifications 1.1 Features Thank you for being interested in purchasing Trend-1 Vibration
More informationDLA. DMX512 Analyzer. DLA Users Manual SV2_00 B.lwp copyright ELM Video Technology, Inc.
DLA DMX512 Analyzer DLA DLA-HH 1 Table Of Contents IMPORTANT SAFEGUARDS... 2 DLA OVERVIEW... 3 CONNECTION... 3 OPERATION... 3 HARDWARE SETUP... 4 DLA-HH (PORTABLE) LAYOUT... 4 CHASSIS LAYOUT... 4 DLA MENU
More informationQuick Start Guide. HM Plug-On Transmitter. Fill in for your records:
Quick Start Guide HM Plug-On Transmitter Digital Hybrid Wireless U.S. Patent 7,225,135 Fill in for your records: Serial Number: Purchase Date: This guide is intended to assist with initial setup and operation
More informationModel 6812 VOLUME FLOW ANEMOMETER. User Manual. 219 Route 206 Phone: PO Box 372 Fax: (973)
Model 6812 VOLUME FLOW ANEMOMETER User Manual Copyright 2008, Kanomax USA, Inc. Page 1 of 29 INTRODUCTION Congratulations on your purchase of a 6812 Digital Anemometer with Volume Calculation! You now
More informationOX 5022-CK OX 5042-CK
QUICK START USER GUIDE OX 5022-CK OX 5042-CK Statement of Compliance Chauvin Arnoux, Inc. d.b.a. AEMC Instruments certifies that this instrument has been calibrated using standards and instruments traceable
More informationDeviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved.
TC500 Ethernet Cabling Certifier Operation Manual Version 1.13 Deviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved. Warranty This instrument is guaranteed for a period of 2 years
More informationDigi-Pas Innovation & Technology Driven
Digi-Pas Innovation & Technology Driven USER MANUAL 2-Axis Precision Digital Level Model: DWL2000XY www.digipas.com REVISION 2.00 Note: Contents in this instruction manual is continuously updated, please
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) ACF-3000 AK 3000A Flexible Current Transducer For use with multimeters or any instrument with AC milli-volt input Measures
More informationAccsense Wireless System. Temperature Monitor
Accsense Wireless System Temperature Monitor Contents 1. Installing the B1-06 Gateway...2 2. Installing the Pods...3 3. Wiring the Pods...5 Version 1 - August 2010 29975 Page 1 1. Installing the B1-06
More information4-Channel Thermometer
4-Channel Thermometer 800023 4-Channel Thermometer - 800023 Copyright 2015 by Sper Scientific ALL RIGHTS RESERVED. Printed in the USA The contents of this manual may not be reproduced or transmitted in
More informationDiagnostics of Genie / Sauer Danfoss Joystick Controllers Deutsch type connection
Diagnostics of Genie / Sauer Danfoss Joystick Controllers Deutsch type connection Tools needed: Multi-meter Small Screwdriver Harness Adaptor 119613 Jumper Wires w/clips Three 1.5 volt AA or AAA Batteries
More informationOperating and Service Manual 3000-Series Exacta 2 Digital Torque Wrenches (All Models)
Sturtevant Richmont Global Reach. Local Support. Division of Ryeson Corporation 3203 N. Wolf Road Franklin Park, IL 60131 Phone: 847/455-8677 800/877-1347 Fax: 847/455-0347 Website: www.srtorque.com E-mail:
More informationMZ Line tester. Contents. Reference: Date: October Version: 3
Contents I. INTRODUCTION... 2 II. Terminology... 3 III. Presentation... 4 Front panel... 4 TOP OF THE CASE... 5 ACCESSORIES SUPPLIED... 5 IV. CAUTION... 6 V. Operation... 7 TURN on and off... 7 MAIN FUNCTIONS...
More informationOperating Manual. Micro-Ohmmeter VG - CS200 VG - CS300 VG - CS400 VG - CS600
Operating Manual Micro-Ohmmeter VG - CS200 VG - CS300 VG - CS400 VG - CS600 Warranty Mostec AG warrants this product to be free of manufacturing defects for a 2-year period after the original date of purchase.
More informationVibraLINK switchable junction boxes Installation and operating guide VLL series
VibraLINK switchable junction boxes Installation and operating guide VLL series Caution: This guide should be read carefully before installation Wilcoxon Sensing Technologies 8435 Progress Drive, Frederick,
More informationSY021 Portable Load/Force Meter User instructions
SY021 Portable Load/Force Meter User instructions Relates to firmware version 5.2 INTRODUCTION The SY021 is a portable load meter, which can indicate the load present on any attached cell. A dual channel
More informationTreadmill Embedded Touch Screen Won t Power Up
Treadmill Embedded Touch Screen Won t Power Up E-TRe and E-TRxe This document contains the necessary information to troubleshoot a treadmill with an embedded touch screen that will not power up. Follow
More informationSigmaCheck. Fully Featured Eddy Current Conductivity Meter ET NDE
Fully Featured Eddy Current Conductivity Meter ET NDE Introducing The SigmaCheck APPLICATIONS Material Verification / Metal Sorting. Heat Treatment Verification. Heat or Fire Damage Investigation. Non-conductive
More informationUser Manual. Borescope. Model THE STANDARD IN PRECISION MEASUREMENT
User Manual Model 20250-28 Borescope THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi-Sense Borescope (Model 20250-28) is ideal for the inspection of ductwork, wiring locations, piping, vehicles,
More information4150 General Purpose HART Communicator 4150X ATEX I.S. Certified HART Communicator
4150 General Purpose HART Communicator 4150X ATEX I.S. Certified HART Communicator File No. 4150:440-2 9R000053-B April, 2008 USER S MANUAL 4150 / 4150X HART Communicator OPERATOR USER S MANUAL IMPORTANT
More informationFloTech FT555PA/PW Automatic Truck Overfill System Tester
FloTech FT555PA/PW Automatic Truck Overfill System Tester Optic Systems Thermistor Systems Ground Continuity System Truck ID Module 10902PA REV B Dixon Dixon Bayco Division Cincinnati, Ohio CAUTION: The
More informationDPL4000 Portable Low Range Dew Point Analyzer
OPERATIONS MANUAL DPL4000 Portable Low Range Dew Point Analyzer 7205 Edington Drive / Cincinnati, OH 45249 / Tel (513) 772-0060 / Fax (513) 772-9466 Page #1 of 16 M4581 DPL4000 Product Description: This
More informationAGATE TECHNOLOGY AT-2040
AGATE TECHNOLOGY AT-2040 OPERATOR MANUAL PORTABLE TRANSDUCER TEST SET (951) 719-1032 info@agatetechnology.com www.agatetechnology.com Introduction: This manual is intended to inform the operating user
More informationUser Manual. Thermocouple Thermometer with Dual Type K/J Inputs and Data Logging. Model with NIST-Traceable Calibration
User Manual Thermocouple Thermometer with Dual Type K/J Inputs and Data Logging with NIST-Traceable Calibration Model 20250-02 THE STANDARD IN PRECISION MEASUREMENT Introduction The Digi-Sense Thermocouple
More informationPower Analyzer Datalogger Model
User's Guide Power Analyzer Model 380801 Power Analyzer Datalogger Model 380803 Extech 380803 Appliance Tester/Power Analyzer Extech 380803 True RMS Power Analyzer Data Logger Extech 380803-NIST True RMS
More information1510A. MTI Instruments, Inc. 325 Washington Avenue Extension, Albany, New York USA Phone: (518) FAX: (518)
Revision 3.1 August 7, 2014 1510A Precision Signal Source Note: Performing a user calibration with the software package will result in an accuracy of 2% at best. A factory cal is required to achieve the
More information