DYNAVISION D2 TM INSTALLATION MANUAL
|
|
- Andrew Harrell
- 5 years ago
- Views:
Transcription
1 DYNAVISION D2 TM INSTALLATION MANUAL Rev 12 Dynavision International 8800 Global Way, West Chester, Ohio USA WEBSITE: FAX: (905)
2 Unpacking the Dynavision D2 TM Inspection: Examine the unit carefully to ensure that there is no damage from shipping. If damaged please contact the carrier and Dynavision International, LLC immediately. NOTE: Dynavision TM recommends that you use two people to remove the machine from the crate. It is more awkward than heavy and an extra set of hands may prevent damage while unpacking the device. It is also recommended that you move the shipping crate near where you are going to be installing the machine. Notice: It has come to our attention that some users of the Dynavision D2 TM may be using the unit incorrectly. The unit must be allowed to move freely up and down. Do not obstruct the up/down movement of the D2 TM unit, do not place or hang anything on the D2 TM and do not place anything under the D2 TM ; the unit needs to move freely. Obstructing the movement of the D2 TM may severely damage or destroy the actuator mechanism that moves the unit up and down and will void your warranty. Dynavision International, LLC only warranties defects in manufacturing, not misuse, abuse or neglect. 2
3 Table of Contents Page # Section #1 Wall Mounted Dynavision D2 List of Contents: Unpacking the Machine: Machine Installation / Hole Location: Section #2 Basic Stand Mounted Dynavision D2 List of Contents: Unpacking the Machine and Mounting the D2 12 Section #3 Deluxe Stand Mounted Dynavision D2 List of Contents: Machine Installation (Mounting the Machine to the stand) 17 Section #4 Dynavision D2 purchased without a Netbook Flash Drive file unloading: 24 SAFETY/MAINTENANCE INFORMATION
4 Section #1: Wall Mounted Dynavision D2 Dynavision TM recommends that you use two people in setting up the D2. Before beginning the machine installation steps, take a moment to inventory the contents of the crate. In it should be the following: List of Contents PART # DESCRIPTION QTY. Machine Dynavision D2 1 Netbook Computer D Netbook 1 2 Pedestal Covers D cover 2 AC Power Cord D ft. power Cord 1 Pedestal Cover Hardware D x3/8 flat head screw 8 Wall Mount Hardware D /4 x1-1/4" hex wash hd screw 4 Safety Strap Hardware D #4 wood screw eyebolt 1 D /4" oval threaded connector 1 Shelf D computer shelf (D2 with Netbook) 1 or D computer shelf 1 Netbook Shelf Hardware D plastic drywall anchor 2 D #6x1-1/4" sheet metal screw 2 Netbook Cable D cable assembly 1 VGA Cable D VGA Cable 1 4
5 1. Unpacking the machine Remove all loose packed items; Netbook, covers, cables and hardware. With your helper, lift the machine out of the box. Use the wheel assemblies as handles to lift with. Once removed from the crate, stand it up against the wall that the machine will be fastened to. Locate the power cord and insert it in the receptacle located on the left side of the pedestal and plug it into the power outlet on your wall. 5
6 Press the height adjustment button (rocker switch) on the left side of the Light Board. Raise the Light Board to expose a series of mounting holes which you will use to mark the correct position to fasten the machine to the wall. The mounting will be explained further below. Once the machine is raised to expose the mounting holes, unplug the power cord from the wall and proceed to follow the instructions below in section Machine Installation (Mounting the Machine to the Wall) Locate the stud in the wall near where you want the machine mounted. NOTE: This stud will not be on the centerline of where the pedestal is attached to the wall. It will be approx. 3 inches to the left of center of where the pedestal will be mounted. Measure from the floor up (along the stud in the wall) 61 inches and make a mark on the wall. 6
7 Using a 3/16 drill bit, drill a pilot hole in the wall at the mark. Drill the hole approx. one inch deep. From the bag marked Pedestal Wall Mount Hardware Kit, screw the screw eye into the stud until the base of the eye touches the wall. Slip the screw locking carabineer into the eye. Lift the machine up towards the wall. Once close, have your helper hook the carabineer into the safety/service strap. The machine will now hang in place. Press the machine up against the wall. Using the pedestal hardware screws shipped in the crate, fasten the pedestal to the wall screwing the 4 screws into the studs in the wall. The picture below indicates where the mounting screws should be spread out. 7
8 Pedestal to be mounted to the wall though holes located in pedestal. Secure the two pedestal covers from the shipping crate over the mounting openings with eight black #6 x 3/8 screws from the bag marked Cover Hardware" 8
9 3. Installation of Netbook Tray Mark the location of the 2 holes on the wall at a level that is comfortable to type and also to see the monitor of the Netbook, typically between 48" to 54" high. Fasten the Netbook holder to the wall with the hardware provided in the bag marked shelf hardware. 9
10 Once the D2 is mounted, connect the electrical power cord into the unit. Connect the Netbook or computer to the machine and follow the instructions contained in the Operators Manual located on the Netbook computer. The Netbook cable and VGA cable are connected to the machine on the left side of the Light Board.The location to plug the cables can be found under the bottom of the Light Board, a gentle insertion force should be used. Also make sure that the cable with the latch is oriented in the correct direction, DO NOT FORCE The cable should be able to be inserted with very little force. Netbook Cable VGA Cable NOTE WELL: IF THE MACHINE IS FASTENED DIRECTLY TO DRYWALL, IT IS VERY IMPORTANT THAT THE MACHINE IS INSPECTED EVERY 3 MONTHS TO MAKE SURE THAT NONE OF THE PLUGS IN THE DRYWALL HAVE COME LOOSE AFTER CONTINUOUS USE. IT IS PREFERRED ( NOT MANDATORY) THAT THE MACHINE IS FASTENED TO A WOODEN BACKING, SO THAT THERE IS PROPER ENGAGEMENT OF THE MOUNTING SCREWS SO THAT THEY CANNOT COME LOOSE AFTER CONTINUOUS OPERATION OF THE MACHINE. PLEASE NOTE ALSO THAT THE SAFETY STRAP MUST BE ATTACHED TO A WALL STUD. 10
11 10 TM Section #2: List of Contents Basic Stand Mounted Dynavision D2 Dynavision TM recommends that you use two people in setting up the D2. Before beginning the machine installation steps, take a moment to inventory the contents of the crate and skid. In it should be the following: PART # DESCRIPTION QTY. Machine Dynavision D2 1 Netbook Computer D Netbook 1 AC Power Cord D ft. power Cord 1 Wall Mount Hardware D /4 x1-1/4" hex wash hd screw 4 Safety Strap Hardware D #4 wood screw eyebolt 1 D /4" oval threaded connector 1 Shelf D computer shelf (D2 with Netbook) 1 or D computer shelf 1 Netbook Shelf Hardware D plastic drywall anchor 2 D #6x1-1/4" sheet metal screw 2 Netbook Cable D cable assembly 1 Basic Stand D Stand 1 VGA Cable D VGA Cable 1 11
12 1. Unpacking the Machine Remove all loose packed items; Netbook, covers, cables and hardware. Remove the stand from the crate, remove all protective packaging and assemble the base, computer tray and upright with bolts provided. Lock the four casters. With your helper, lift the machine out of the box. Use the wheel assemblies as handles to lift with. Once removed from the crate, center it in the stand. After leaning the Dynavision D2 against the stand attach the safety strap to the stand as shown below. Use the oval connector provided with the D2 in the crate. This will prevent the D2 from falling while you bolt the D2 to the stand. 12
13 Slip the top of the light board frame between the fingers of the risers; close the fingers to within approx. 1/4" to 3/8" of the bottom of the frame and tighten the bolts.the four bolts sticking out of the back of the D2 are to stick thru the horizontal cross members of the basic stand. Install four 1/4-20 nuts and washers on the bolts. 1/4" to 3/8" Side view of basic stand with fingers installed. Rear view of basic stand with nuts and washers 13
14 3. Installation of Netbook on the Tray Position the Netbook in the Netbook tray by adjusting the two side guides and tightening the thumb nuts on the bottom of the tray. 14
15 Once the Light board is mounted, connect the electrical power cord into the unit. Connect the Netbook or computer to the machine and follow the instructions contained in the Operators Manual located on the Netbook computer. The Netbook cable and VGA cable are connected to the machine on the left side of the Light Board.The location to plug the cables can be found under the bottom of the Light Board, a gentle insertion force should be used. Also make sure that the cable with the latch is oriented in the correct direction, DO NOT FORCE The cable should be able to be inserted with very little force. Netbook Cable VGA Cable 15
16 Section #3: List of Contents Deluxe Stand Mounted Dynavision D2 Dynavision TM recommends that you use two people in setting up the D2. Before beginning the machine installation steps, take a moment to inventory the contents of the crate and skid. In it should be the following: PART # DESCRIPTION QTY. Machine Dynavision D2 1 Netbook Computer D Netbook 1 2 Pedestal Covers D cover 2 AC Power Cord D ft. power Cord 1 Pedestal Cover Hardware D x3/8 flat head screw 8 Wall Mount Hardware D /4 x1-1/4" hex wash hd screw 4 Safety Strap Hardware D #4 wood screw eyebolt 1 D /4" oval threaded connector 1 Shelf D computer shelf (D2 with Netbook) 1 or D computer shelf 1 Netbook Shelf Hardware D plastic drywall anchor 2 D #6x1-1/4" sheet metal screw 2 Netbook Cable D cable assembly 1 Deluxe Stand D stand 1 VGA Cable D VGA Cable 1 16
17 17
18 18
19 Prior to bolting the Dynavision D2 to the Deluxe stand attach the safety strap as shown in the picture below. Use the oval connector provided with the D2 in the crate. This will prevent the D2 from falling while you bolt the D2 to the stand. 19
20 20
21 Installation of Netbook on the Tray Attach the Netbook Holder to the rear of the Deluxe stand with two 1/4-20 bolts. After holding the Netbook holder in the location you like; tighten the bolts at the knuckle joints to hold it in place. Position the Netbook in the Netbook tray by adjusting the two side guides and tightening the thumb nuts on the bottom of the tray. 21
22 Secure the two pedestal covers from the shipping crate over the mounting openings with eight black #6 x 3/8 screws from the bag marked Cover Hardware" Once the Light board is mounted, connect the electrical power cord into the unit. Connect the Netbook or computer to the machine and follow the instructions contained in the Operators Manual located on the Netbook computer. The Netbook cable and VGA cable are connected to the machine on the left side of the Light Board.The location to plug the cables can be found under the bottom of the Light Board, a gentle insertion force should be used. Also make sure that the cable with the latch is oriented in the correct direction, DO NOT FORCE The cable should be able to be inserted with very little force. 22
23 22 TM Netbook Cable VGA Cable 23
24 Section #4: D2 without a Netbook If your D2 was purchased without a Netbook; set up your D2 using section 1, 2 or 3 of this installation manual. Use the following procedure to load all files from the flash drive onto your Netbook or computer. The flash drive is supplied in the crate with the D2. STARTUP PROCEDURE 1. Insert Flash Drive into the USB port of Computer/Net Book Wait for the Auto Play window to open up, and then double click on Open Folders. Note: If Auto Play Window does not come up go down to the Start menu and open up Computer Window. Once the Computer window is open look for the Flash Drive or Drive titled Dynavision Click on the Start menu and open a second Computer Window. Then Click into the C:\ Drive Drag the Dynavision Folder off the Flash Drive into the C:\ Drive folder. Next drag the noisivand.dih Folder into the Windows Folder located on the C:\ Drive. 24
25 Go into the Dynavision Folder and Right click on the Dynavision.exe file scroll cursor down to send to then click on Desktop (create shortcut). This will setup a shortcut onto your desktop. Repeat step 0.6 for the Installation Manual, Trouble Shooting Manual, and Operators Manual. Drag the PL2303 File onto the desktop and install the driver by double clicking on the icon. Side Note: This is an optional step, if you do not want MacAfee Anti-Virus you may un-install it and install Microsoft Security Essentials on to the computer by double clicking on the mseinstall.exe 25
26 26
Innovative Americans, LLC. HD Media Pack Installation Manual
Innovative Americans, LLC HD Media Pack Installation Manual Please read this manual before you begin! Your installation will be EASIER and SAFER if you take a few moments to read this document!! Proudly
More informationAssembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
More informationAssembly and Setup Manual
M-12 Series Copyboard / C-12 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-12 series Copyboard and C-12 series Captureboard. (The copyboard and/or
More informationThe Minimalist, Modular, Wall-Mounted Standing Desk
The StandCrafted Installation Manual Last Update: 03/04/2016 www.standcrafted.com support@standcrafted.com DISCLAIMERS Copyright StandCrafted LLC. All rights reserved. This document is solely intended
More informationEaton LCD Lift Flat Panel Display System. Installation Guide
Eaton LCD Lift Flat Panel Display System Eaton LCD Lift Flat Panel Display System Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More informationFlat Panel Static Wall Mount MSP-SS (GSM-210)
INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount (GSM-2) The static wall mount fits most 23 to 30 displays. The mount was designed to adapt to the VESA 75mm/0mm, 0mm/0mm, and 200mm/0mm compliant
More informationAssembly and mounting Instructions
PMS-FL Assembly and mounting Instructions Note: Keep your original packaging until assembly is complete. Two persons are required to attach plasma/lcd displays to this mount. If you cannot understand these
More informationCharging Cabinet Owner s Manual
by edugear Charging Cabinet Owner s Manual Before using, please read these operating instructions carefully. They contain important advice concerning the use and safety of your Charging Cabinet. The Charging
More information7403 K321. Display Wall Mount. Kit Instructions. Issue A
7403 K321 Display Wall Mount Kit Instructions Issue A ii Revision Record Issue Date Remarks A Nov 2008 First issue 1 Introduction This kit is used in to secure a 7403 Display Head on a vertical surface.
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationTable of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More informationSPECIFICATION & INSTALLATION GUIDE
SPECIFICATION & INSTALLATION GUIDE FREEFRAME FP7 v3 Mobile Stand for Flat Panel Display with Motorized Raise and Lower www.gilkon.com.au email: sales@gilkon.com.au phone: (02) 99140900 fax: (02) 99140901
More informationINSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS
JOBSITE STORAGE SOLUTIONS ALWAYS ON THE JOB INSTALLATION MANUAL 118-01 DATAVAULT 118-02 DATAVAULT - BARE Werner Co. 724-588-2000 93 Werner Rd. 888-523-3371 toll free/ llamada gratuita Greenville, PA 16125
More informationSPECIAL INSTRUCTIONS FOR CAPACITORS COMPACT GENERATORS
SPECIAL INSTRUCTIONS FOR CAPACITORS COMPACT GENERATORS (WITH CAPACITOR CHARGER BOARD A3517-02) The process depends on Generator and System configuration. This document applies to installation of Capacitors
More informationBlackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Maintain controlled airflow without sacrificing blackout environments.
More informationStar Trac Fitness E-ST 5090 Stepper. Install Guide
Star Trac Fitness E-ST 5090 Stepper Install Guide STAR TRAC E-ST STEPPER Install Guide E-ST 5090 E Series Stepper ASSEMBLY AND SETUP The following parts are included with the base STAR TRAC E-ST STEPPER:
More informationATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
1. Turn off and unplug the game. COPYRIGHT 2007 MERIT ENTERTAINMENT 2. Unlock and open the CPU section. Ion evo/evo Wallette/Elite Edge ECS Motherboard Removal 3. Remove the 3 screws securing the I/O board
More informationUPLIFT 2-Leg Height Adjustable Standing Desk (Version v4 Control Box)
UPLIFT 2-Leg Height Adjustable Standing Desk (Version v4 Control Box) DIRECTIONS FOR ASSEMBLY AND USE TABLE OF CONTENTS Also watch our assembly video http://bit.ly/2qvkeuf PAGE 1 Safety and Warnings 2
More informationTECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationSerial ATA Hot Swap Drive Cage Upgrade Kit for: Intel Server Chassis SC5200 Intel Server Chassis SC5250-E
Serial ATA Hot Swap Drive Cage Upgrade Kit for: Intel Server Chassis SC5200 Intel Server Chassis SC5250-E A Guide for Technically Qualified Assemblers of Intel Identified Subassemblies/Products Order Number:
More informationE1135C PDU and Pod Upgrade Procedure
E4030-90010 Rev. B 12/2003 In this Document... Tools Needed, 2 Contents of the Upgrade Kits, 2 Installation Procedures, 4 Verifying the Power Option of the New PDU, 4 Removing the PDU from the Support
More informationTASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS
TASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.taser.com
More informationVortex Series 2-leg Desk Assembly Guide
ELECTRIC HEIGHT-ADJUSTED SIT TO STAND DESK Vortex Series 2-leg Desk Assembly Guide For desk with underframe Model No. AL4628-XX REV-1509A Table of Contents IMPORTANT SAFETY INSTRUCTIONS... 3 CAUTION, USE
More informationDigital Menu Board Wall Mount Installation Instructions
Digital Menu Board Wall Mount Installation MDSWMB2T4249 MDSWMB3T4249 www.microndisplaysolutions.com Table of Contents Important Safety... 3 Models and Specifications... 4 Package Contents... 5 Step 1 Two(2)
More informationLCD Series & Tablet Series Set-Up Instructions
LCD Series & Tablet Series Set-Up Instructions Parts List: Mount Arm (1) T-Nut (1) Large Camera Knob (1) Small Camera Knob (1) Mirror Knob (2) Monitor/Mirror Assembly (1) Teleprompter Parts Step #1A Remove
More informationSEQUEL 6051/6052 LIFT DESK
SEQUEL 6051/6052 customerservice@ OWNER S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to
More informationV5420 Host Card Upgrade Kit for R3082D Quick Start Guide
Quick Start Guide Upgrade kit contents The table below shows the contents of the V5420 Host Card Upgrade Kit (components are not shown to scale). Part Function Pieces V5420 Host Card 1 Host card bracket
More informationMotorized Ceiling TV Mount
Motorized Ceiling TV Mount Instruction Manual SKU: MOUNT-E-FD55 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-e-fd55
More informationSapling Converter Box
Installation Manual Sapling Converter Box SCB-100-000-1 Version Number 1.2 Current as of March 15, 2015 The Sapling Company, Inc. (+1) 215.322.6063 P. (+1) 215.322.8498 F. 2-Wire Converter Box (SCB-100-000-1)
More informationBasketball Shot Clock Set LX2180 Manual
Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents
More informationMoving-Minds.com Treadmill Desk Operation
LifeSpan Treadmill Desk - Owner s Manual Models DT-5/DT-7 Desk Assembly DT-5 Desk........................................................................................ Assembly Instructions..........................................................................
More informationBlackout Shutter Kits with Breathable Wall Light Traps
Blackout Shutter Kits with Breathable Wall Light Traps 2018 Growers Supply All Rights Reserved. Reproduction is prohibited without permission. Revision date: 05.10.18 Maintain controlled airflow without
More informationIoline 300/350HF System
Quick Start Guide Ioline 300/350HF System User Notice Trademarks Ioline is a trademark of Ioline Corporation. Other product names, logos, designs, titles, words or phrases mentioned within this publication
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationPracticeWire Installation Manual
PracticeWire Installation Manual Version 5.0 August 28 th, 2013 PCM Help Desk 1-877-233-9114 Page 1 Table of Contents System Overview 3 Tool List 4 Installation Guide Site Notification 5 Install Universal
More informationAssembly Manual for Mobile X-ray
Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis - 12 th January 2011 William Green Page 1 of 8 Printed 12/01/2011, 2:07:42 PM Mobile X-ray Parts List 1. 6 x M10 x 65mm UNB CAP Bolts 2.
More informationThanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443
Thanks for shopping with Improvements! Lighted Canterbury Christmas Greenery Doorway Arch Item #548443 IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. PARTS LIST: 2 Metal Plate Stands 5 Greenery
More informationWall Mount Kit for Touch Panel Controller. Installation Guide
Wall Mount Kit for Touch Panel Controller Installation Guide Table of Contents Getting Started... 1 SKUs Used... 2 Connections... 3 Powering a Touch Panel Controller... 3 Communication Connections... 3
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS CONTENT: 1. Important safety instructions 2. Specifications and main dimensions 3. Parts included 4. Control box 5. Installation 6. Adjusting the stroke length of the lift 7.
More informationTreadmill Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
Treadmill Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 Before You Begin... 4 Obtaining Service... 4 Unpacking the Equipment... 4 Important
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationAg Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series
Note: Indented items indicate parts included in an assembly listed above. Part Name / Description Part Number Quantity Direct Command Spra-Coupe 7000 Kit 4100531 1 Liquid Product Control Module 4000394
More informationWallVIEW PTZ Systems WallVIEW 50i PTZ, WallVIEW 100 PTZ and WallVIEW 70 PTZ Pan/Tilt/Zoom Camera Systems
Camera and Electronic Products for Integrators Installation and User Guide WallVIEW PTZ Systems WallVIEW 50i PTZ, WallVIEW 100 PTZ and WallVIEW 70 PTZ Pan/Tilt/Zoom Camera Systems Figure 1: WallVIEW Systems
More information6400 Series Front Loading Mailboxes Installation Manual USPS STD-4C
6400 Series Front Loading Mailboxes Installation Manual USPS STD-4C TABLE OF CONTENTS PAGE USPS 4C I nstall ed Height Re quire ments 2 Wall Frame Cons truc tion Rec omme ndations 3 Independent Installer
More informationCENTRO 6451/6452 LIFT DESK
CENTRO 6451/6452 OWNER S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products.
More informationWhisper-Ride
11/16/2007 LR (1) CAUTION: Before you begin any of the installation procedures on page 3, read and follow the warnings and safety instructions on this page. WARNING! THIS IS NOT A TOY! WARNING! CHILDREN
More informationOperating Instructions
Operating Instructions Model Numbers: LS LS M LS G LS A LS LS 00 LS M-WC LS A LS X LS M-WC LS B LS X LS M LS Dimensions A / B / C / D / E 0 / F / Electrical Information Voltage AMPS Frequency 0 HZ Single
More informationAddendum to the Actalyst Interactive Digital Signage Installation and User s Guide
Addendum to the Actalyst Interactive Digital Signage Installation and User s Guide This addendum contains information about the Actalyst Interactive Overlay that has changed since the release of the Actalyst
More informationINSTALLATION INSTRUCTIONS Version 2.4
INSTALLATION INSTRUCTIONS Version 2.4 11/12/2012 Patient Point, LLC 8230 Montgomery Road, Suite 300 Cincinnati, Ohio 45236 1-800-287-0908 TABLE OF CONTENTS System Overview 2 Tool List. 3 Installation Process
More informationNikon Focus Drive Manual
Nikon Focus Drive Manual PRIOR SCIENTIFIC INC., 80 RESERVOIR PARK DRIVE, ROCKLAND, MA 02370-1062 TELEPHONE 781-878-8442 FAX 781-878-8736 WWW.PRIOR.COM Table of Contents Safety Information...1 Unpacking
More informationAPES-14 HD-6500 & HD-7000 Version Operator s Training Manual
APES-14 HD-6500 & HD-7000 Version Operator s Training Manual Issue A1 09/03 PDI Part # 900600 Performance Design Inc. 2350 East Braniff St. Boise Idaho 83716 This manual contains very important safety
More informationUPLIFT 4-Leg Height Adjustable Standing Desk (Version v4.1 Control Box)
UPLIFT -Leg Height Adjustable Standing Desk (Version v. Control Box) DIRECTIONS FOR ASSEMBLY AND USE TABLE OF CONTENTS PAGE Safety and Warnings 2 2 Usage 2 3 Parts List 3 Assembly Instructions 5 Desk Placement
More informationV.I.A. - Monitor Shroud
V.I.A. - Monitor Shroud NOTE: Installing slatwall above a monitor shroud requires modification of the upper horizontal rail. See V.I.A. Slatwall assembly direction 939502328 for installation process. V.I.A.
More informationNAV-1 Lens Support. NAV-2 Lens Support BEFORE YOU BEGIN
INSTALLATION Lens Support INSTRUCTIONS The Lens Support is compatible with any RPA projector mount. The readily adapts to the following ScreenStar Conversion Lens from Navitar: SSW08 and SST120. LENS SUPPORT
More information25 Sport Scope Instruction Manual
25 Sport Scope Instruction Manual Dear Customer, We appreciate your business and value your support for our product. At Sport Scope, we strive to provide our customers with quality, easy to use, and affordable
More informationParts List: Assembly Instructions:
My Ride SERVICE MANUAl MyRide ASSEMBLY GUIDE 1.1 ASSEMBLY INSTRUCTIONS ASSEMBLING THE MYRIDE Parts List: Heavy Plate Stabilizer Fin - Right Stabilizer Fin - Left Stabilizer Fin - Large Middle Power Cord
More informationINSTALLATION MANUAL DATAVAULT DATAVAULT - BARE JOBSITE STORAGE SOLUTIONS
JOBSITE STORAGE SOLUTIONS ALWAYS ON THE JOB INSTALLATION MANUAL 118-01 DATAVAULT 118-02 DATAVAULT - BARE Werner Co. 724-588-2000 93 Werner Rd. 888-523-3371 toll free/ llamada gratuita Greenville, PA 16125
More informationrooms Conference Room Mac Quickstart Guide
rooms Conference Room Mac Quickstart Guide WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers responsibility to make certain
More informationDIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL
DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL Version 2.1 June 4, 2013 0 Table of Contents Low Profile Pan Tilt Kit Description... 3 Low Profile Pan Tilt Unit Basic Operation... 4 Mounting
More informationTo connect the AC adapter:
Replacing the AC Adapter Replacing the AC Adapter 3 Plug the power cord into a wall outlet. The power indicator turns on. To connect the AC adapter: Connect the power cord to the AC adapter. Power indicator
More informationSF Studio Series Set-Up Instructions
SF Studio Series Set-Up Instructions Teleprompter Parts Step #1 Remove the quick-release plate from your tripod head. Set the plate on a flat surface (table, desk, etc) with anti-skid pads on top & camera
More informationZ-Truck (Vertical Moving) Z-truck Flag. Y-Truck (Horizontal Moving) FIGURE 1: VIEW OF THE Z-TRUCK. Flexshaft Assembly
Replacing the LCD Cable To remove and replace the LCD Cable you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) Socket wrench with 10mm socket Removing the Side Panel 1.
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationInfrared Interactive Whiteboard User Manual
Infrared Interactive Whiteboard User Manual Information in this manual is subject to change without notice. Content Important Information... 1 System Requirements... 2 Introduction... 3 How to install
More informationINSTALLATION INSTRUCTIONS
Distributed By: INSTALLATION INSTRUCTIONS Product Revision Form Rev. H PANASONIC CF19 DOCKING STATIONS, CRADLE and ACCESSORIES 7160-0207: Docking Station (NO/RF) 7160-0215: LED Assembly 7160-0207-02: Docking
More informationINSTALLATION MANUAL KIOSK SX6 SF6
INSTALLATION MANUAL KIOSK SX6 SF6 Boink Systems Inc SX6 Installation Manual 1 REVISION RECORDS DATE DESCRIPTION OF CHANGE APPROVED Oct-12-2003 First draft specifications L.P. Nov-18-2003 Change to SX6
More informationFABRICATED PRODUCT RANGE
FABRICATED PRODUCT RANGE Mobile: +27(0)82 556 0793 Tel / Fax +27(0)11 472 0460 E-Mail: info@kraftig.co.za Website : www.kraftig.co.za Johannesburg / South Africa MOBILE LIFTING GANTRY Chain block and crawler
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationInstallation Guide. Retrofit Kit for USB Ready Intraoral Systems
Installation Guide Retrofit Kit for USB Ready Intraoral Systems Table of Contents Wall-Mount Retrofit Kit... 2 Introduction... 2 Connecting the Articulating and Horizontal Arm Cables... 2 Installing the
More informationBreeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL
Breeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
More informationFormulate Designer Series 20 Backwall - Kit 11
Formulate Designer Series 20 Backwall - Kit 11 FMLT-DS-20-11 Formulate Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationIBM Systems. Quick start guide for IBM System p5 505 ( )
IBM Systems Quick start guide for IBM System p5 505 (9115-505) 1 Before you begin This Quick start guide contains an abbreviated set of setup instructions designed to help you quickly unpack and set up
More informationExtra Large Full Motion TV Mount for Televisions
8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84
More informationOV1000 Part No OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1000 Part No. 23624 OV1000 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1000 OV1000 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More informationMAGIXBOX TM. Quick Start Guide
TM TM by TouchMagix MAGIXBOX TM Quick Start Guide What s in the box: Ankle Ceiling Plate Extendable Rod Connector Piece Middle Piece Universal Spider Super clamp with ball socket Safety Cable Projector
More informationWarnings & Guidelines:
Please read the following instructions and warnings carefully. Keep this instruction manual for future reference. Tools required (for wall mouting Camera only): Screwdriver and Drill (not included) For
More informationWall Mount Accessory Kit for 6 Device Tub
FTT-ACW / FTT600-W Tech Tub2 Wall Mount Accessory Kit for 6 Device Tub Assembly Guide FTT-ACW / FTT600-W_2017_A Check out our other products online at www.copernicused.com For assistance, please contact
More informationEMPEROR XT USER MANUAL
EMPEROR XT USER MANUAL MWE LAB 100A - 2205 Wilfrid-Hamel Quebec, QC G1P 2H8 CANADA www.mwelab.com T +1 418 688 7246 US & CANADA 1 800 652 5403 2USER MANUAL - EMPEROR XT Proudly built in Canada with industrial
More informationVertiv VR Rack 1.0 GENERAL
1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic
More informationVJ-1304 INSTALLATION MANUAL
Please read this manual before using Thank you for purchasing a MUTOH product. This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH Full-color inkjet printer
More informationCycles Integrated LCD Screen Option. Cardio Theater Integrated Bracket Assembly Instructions
Recumbent Upright Cycles Integrated LCD Screen Option Cardio Theater Integrated Bracket Assembly Instructions Table of Contents 1 2 3 4 5 6 7 Before You Begin... 4 Obtaining Service... 4 Unpacking the
More informationMUTOH EUROPE N.V. Tel.:32-(0) Fax:32-(0)
MUTOH INDUSTRIES LTD. Tel.:8-(0)-570-00 Fax:8-(0)-570-00 E-mail:ibd@mutoh.co.jp http://www.mutoh.co.jp MUTOH AMERICA INC. Tel.:-80-968-777 Fax:-80-968-7990 E-mail:sales@mutoh.com http://www.mutoh.com MUTOH
More informationDell OptiPlex All-in-One. Stand Installation Guide
Dell OptiPlex All-in-One Stand Installation Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates
More informationOV1001 Part No OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE
OV1001 Part No. 23620 OV1001 HEIGHT ADJUSTABLE TABLE USER GUIDE PRODUCT OVERVIEW User Guide: OV1001 OV1001 HEIGHT ADJUSTABLE TABLE A healthier work environment starts with the option to sit or stand throughout
More information1. Unpacking the System
1. Unpacking the System To prevent shipping damage the system is packed in multiple boxes. Chassis The chassis in shipped in one box by itself. The chassis is shipped assembled. Inside the chassis you
More informationQuad Monitor Desk Stand - 13" to 24" Installation Instructions
Quad Monitor Desk Stand - 13" to 24" Installation Instructions 04-0885A 1 Unpacking Carefully remove the contents and lay out on cardboard or other protective surface Check package contents against the
More informationInstallation Manual. 65 Interactive LED/LCD. Model: HILF65101 (64.56 )
Installation Manual 65 (64.56 ) Model: HILF65101 65 Interactive LED/LCD QUICK SETUP GUIDE For further information, see the user manual. Please contact directly if you have questions on the use of the touch
More informationPT Teleprompter
Features you need, Prices you want. PT2100 8 Teleprompter User Guide 3903 Stoney Brook Dr. Houston TX 77063 Tel: 1.713.272.8822 Fax: 1.713.995.4994 www.ikancorp.com support@ikancorp.com 2009 ikan Corporation.
More information1 Quickstart Guide 1
1 Quickstart Guide 1 Honey, I m Home! 2 Nucleus at a Glance Instant Video & Audio Calling Privacy & Security Connect with all your loved ones with ease, so home is just The Privacy Camera Shutter, Do Not
More informationSerial No. OWNER S MANUAL. Installation & Operation
Serial No. OWNER S MANUAL Installation & Operation Table of Contents Safety & Warranty Warnings 01 Parts List 02 GhostBed Electronics Quick Reference Guide... 03 Installation Guide 04 GhostBed Remote Control
More informationVG-D70. Vertical / Battery Grip for the Nikon D70
VG-D70 Vertical / Battery Grip for the Nikon D70 Harbortronics LLC Post Office Box 2663 Gig Harbor, WA. USA 98335 253-858-7769 (Phone) 253-858-9517 (Fax) Sales & Service: Deborah@Harbortronics.com Technical
More information21 TRACK MAINTENANCE GUIDE
Mountain Engineering II, Inc. 21 TRACK MAINTENANCE GUIDE 1233 Sherman Drive, Longmont, CO 80501-6133 303-651-0277 303-651-6371 (fax) www.mountainengineering.com Table of contents Table of contents...2
More informationFormulate 20 x 20 Island Exhibit - Kit 10
Formulate 20 x 20 Island Exhibit - Kit 10 CFAB-K-10 Formulate Fusion provides an unparalleled dynamic that elevates and accentuates a message and brand, but also maximizes the return on tradeshow investment.
More informationPulse LED Instruction Guide
PARTS LIST Light Fixture Aquarium Frame Mounts Instruction Guide WARNING: To guard against injury, basic precautions should be observed, including the following: A) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
More informationVRp Three-Phase Precision AC Voltage Regulator
VRp-22500-0338 Three-Phase Precision AC Voltage Regulator INSTALLATION INSTRUCTIONS Inspection and Unpacking Please inspect the wooden crate for obvious shipping damage. Some crates contain up to six (6)
More informationTactical Weather Station Set-Up Guide 1
Tactical Weather Station Set-Up Guide 1 This is a generic overview of a portable WEATHERPAK 3 meter tripod set-up. Your system may not include all of the components listed, or may have different components.
More informationTIVO DVR UPGRADE INSTRUCTIONS (#80-HD)
TIVO DVR UPGRADE INSTRUCTIONS (#80-HD) (c) 2001-2006, weaknees. All rights reserved. Instructions for TwinBreeze HR10-250 DVR Upgrade Bracket/Kit Instructions are available online (in COLOR) at http://www.weaknees.com
More information