80 Series Push Button Pendant Features

Size: px

Start display at page:

Download "80 Series Push Button Pendant Features"

Barbra Thompson
5 years ago
Views:

80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization.

Enclosure Features: igh impact, yellow S enclosure wo-piece design to simplify field wiring ated NEM 4X (IP65); suitable for indoor or outdoor use Shock resistant to 100 g.

1 80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get from 2 to 12 buttons in a standard configuration or up to 24 buttons in a duplex configuration. Enclosure Features: igh impact, yellow S enclosure wo-piece design to simplify field wiring ated NEM 4X (IP65); suitable for indoor or outdoor use Shock resistant to 100 g. Double-insulated to withstand 2500V UL/cUL Listed for indoor use only 80 Series Pendants are ideal for: verhead crane control Workstations Monorail and hoist control ssembly lines Conveyor and elevator control ther industrial machines General Switch Features: ne, two, and three-speed operators Silicon-booted buttons Easy-force buttons with positive detents for speed selections Switch contacts rated at 5 (at 120 VC) 5 F to 160 F (-15 C to 70 C) operating temperature range 120VC & 240VC, 24VDC & 12VDC, 120VDC Cable Packing Gland Furnished with bushing available in 16 sizes; assures water tight seal. Lamp & orn Switch Knock-out holes in.47 inch (12mm) and.75 inch. (19mm) diameters. vailable for a lamp and horn switches on 6 through 12 button enclosures. Cable ushings vailable in 10 sizes from 0.30 in. to 1.16 inches (7.5mm to 29.5mm). ushing Collar hree sizes for cable diameters from 0.30 inches to 1.16 inches (7.5mm to 29.5mm). anger ing Located on the back of the bushing collar. For external strain relief connection. S hook is available for strain relief cable connection - see Pg. 15. Fasteners Self-captive stainless steel hardware and threaded inserts in housing to prevent thread stripping. uttons Silicone ubber booted buttons. Seals out dirt and moisture. vailable in red, green, and black. Jumpers Included with all pre-assembled pendants - See Pg. 16. Enclosure Ergonomic design, visible safety yellow, shock and vibration resistant, rugged S, 2 through 12 button. Standard ack or Deep ack styles. wo piece enclosure simplifies field wiring. utton Legends Standard button legends are included. Vertical, selector, and mushroom legends are also available. 4

2 80 Series - Custom Pendant rder Sheet See Pgs. 6-7 for Pre-Configured Pendants. For custom pendants, fax or the completed sheet to your local sales office to obtain a quotation - see back cover for contact information. equest Date Company Company ype Sales Person Name itle Phone Fax y Cable.D. (from Step 4): u Number of switches (button holes) required (ound up to even #) v List switch inserts & lamp/horn inserts as needed by Part. No. below. See Pgs w List number of conductors per switch. See Pgs ushing and Cable Gland (See Pg. 6): z Select the appropriate enclosure based on # of holes required, types of switches, and size of bushing needed. Deep ack enclosure is required for certain switch types, as noted on Pgs. 9-15, and for pendants that have 16 or more wires to accommodate inside the enclosure. See page 8 for enclosure details. Check appropriate box: 8 Standard ack Cable.D mm # of Commons eq d: Deep ack Cable.D mm Standard ack Cable.D mm C otal no. of conductors required (sum of above) x Cable.D. (based on the number of conductors required) - See Pg. 24: { utton Legend Sheet - see Pg. 16 for available styles and insert Part No. List desired options - Strain elief Cable, S ook, Quick Disconnect, etc.) - see Pgs. 15, 16, and 24. Deep ack Cable.D mm D 5

3 Complete 80 Series Push utton Pendants ll Pendant Stations are fully assembled and include enclosure, operators, cable bushing, S hook and button legend sheet. Contact Conductix-Wampfler or your local representative for custom pendant stations. Jumpers included on assembled pendants only. uttons Switch rrangement Complete Unit ushing 2 Momentary n/ff (ed, Green) Maintained n/ff (ed, Green) wo 1-Speed wo 2-Speed wo 3-Speed wo 1-Speed, With Momentary n/ff (ed, Green) wo 1-Speed, With Maintained n/ff (ed, Green) wo 2-Speed, With Momentary n/ff (ed, Green) wo 2-Speed, With Maintained n/ff (ed, Green) wo 3-Speed, With Momentary n/ff (ed, Green) wo 3-Speed, With Maintained n/ff (ed, Green) Four 1-Speed Four 2-Speed Four 3-Speed Four 1-Speed, With Momentary n/ff (ed, Green) Four 1-Speed, With Maintained n/ff (ed, Green) Four 2-Speed, With Momentary n/ff (ed, Green) Four 2-Speed, With Maintained n/ff (ed, Green) Four 3-Speed, With Momentary n/ff (ed, Green) Four 3-Speed, With Maintained n/ff (ed, Green) Six ne Speed Six wo Speed Six hree Speed Six 1-Speed, With Momentary n/ff (ed, Green) Six 1-Speed, With Maintained n/ff (ed, Green)

4 Complete 80 Series Push utton Pendants ll Pendant Stations are fully assembled and include enclosure, operators, cable bushing, S hook and button legend sheet. Contact Conductix-Wampfler or your local representative for custom pendant stations. Jumpers included on assembled pendants only. uttons Switch rrangement Complete Unit ushing 8 Six 2-Speed, With Momentary n/ff (ed, Green) Six 2-Speed, With Maintained n/ff (ed, Green) Six 3-Speed, With Momentary n/ff (ed, Green) Six 3-Speed, With Maintained n/ff (ed, Green) Eight 1-Speed Eight 2-Speed Eight 3-Speed Eight 1- Speed, With Momentary n/ff (ed, Green) Eight 1-Speed, With Maintained n/ff (ed, Green) Eight 2-Speed, With Momentary n/ff (ed, Green) Eight 2-Speed, With Maintained n/ff (ed, Green) Eight 3-Speed, With Momentary n/ff (ed, Green) Eight 3-Speed, With Maintained n/ff (ed, Green) en 1-Speed en 2-Speed en 3-Speed en 1-Speed, With Momentary n/ff en 1-Speed, With Maintained n/ff en 2-Speed, With Momentary n/ff en 2-Speed, With Maintained n/ff en 3-Speed, With Momentary n/ff en 3-Speed, With Maintained n/ff welve 1-Speed welve 2-Speed welve 3-Speed

80 Series Pendant Enclosures and ushings Single Enclosures 3.54 (90) 0.69 (17.5) 0.49 (12.5) 0.18 (4.5) Dia. ushing collar can be mounted facing to the front or rear. 1.50 or 2.

43 (87) 12-24 Consult Factory CMPLEE ENCLSUE (FN ND CK) (For different size bushings order from below) # of utton oles Enclosure Depth Inlet Size Cable Diameter ange Inches (mm) 2

10 (22-28) 34278 8 Standard Large.87-1.10 (22-28) 34282 10 Standard Large.87-1.10 (22-28) 34286 12 Standard Large.87-1.10 (22-28) 34290 6 Deep ack Small.31 -.

87-1.10 (22-28) 34291 7.15 (181.6) Inlet Diagram Duplexed Enclosures For details on pendants up to 24 buttons, contact the factory. 10.45 (265.4) 2.94 (74.7) 3.63 (92.2).49 (12.5) 1.

For Enclosures 34274, 34275, 34276, 34280, 34277, & 34281: Cable Size ange inches (mm) Cable ushing.30 -.41 (7.5-10.5) 34411.41 -.53 (10.3-13.5) 34412.52 -.65 (13.3-16.5) 34413.64 -.

5 80 Series Pendant Enclosures and ushings Single Enclosures 3.54 (90) 0.69 (17.5) 0.49 (12.5) 0.18 (4.5) Dia. ushing collar can be mounted facing to the front or rear or 2.0 for the Deep ack (38 or 51) oles Dim. Dim (114) 3.07 (78) (180) 3.07 (78) (262) 3.23 (82) (322) 3.23 (82) (387) 3.43 (87) (447) 3.43 (87) Consult Factory CMPLEE ENCLSUE (FN ND CK) (For different size bushings order from below) # of utton oles Enclosure Depth Inlet Size Cable Diameter ange Inches (mm) 2 Standard Small (8-21) Standard Small (8-21) Standard Small (8-21) Standard Small (8-21) Standard Large (22-28) Standard Large (22-28) Standard Large (22-28) Standard Large (22-28) Deep ack Small (8-21) Deep ack Small (8-21) Deep ack Large (22-28) Deep ack Large (22-28) Deep ack Large (22-28) Deep ack Large (22-28) (181.6) Inlet Diagram Duplexed Enclosures For details on pendants up to 24 buttons, contact the factory (265.4) 2.94 (74.7) 3.63 (92.2).49 (12.5) 1.46 (37.1) 1.5 (38.1) Enclosure ushings Correctly sized bushings are necessary to prevent moisture from getting inside of the enclosure. rder based on cable.d. and the part number of the enclosure the bushing is to be used on. For Enclosures 34274, 34275, 34276, 34280, 34277, & 34281: Cable Size ange inches (mm) Cable ushing ( ) ( ) ( ) ( ) For Enclosures 34278, 34282, 34286, 34290, 34279, 34283, 34287, & 34291: ( ) ( ) ( ) ( ) ( )

Pilot Lights & orn Switches Small ccessory ole Large ccessory ole Pilot Light - Large ed neon light, 19 mm diameter, for use with 6, 8, 10 and 12 button enclosures.

] Voltage Wires* 36088 12 / DC 1 36081 24 DC / C 1 34316 110 / C 1 Momentary Push utton orn Switch 19mm diameter, for use with 6, 8, 10 and 12 button enclosures.

* ypical wiring - for general information only. Number of wires will vary depending on the wiring method used.

6 Pilot Lights & orn Switches Small ccessory ole Large ccessory ole Pilot Light - Large ed neon light, 19 mm diameter, for use with 6, 8, 10 and 12 button enclosures. Fits into large accessory hole in enclosure, not button space. [Note: hese can be installed at the small hole location, but in that location, must be factory installed.] Voltage Wires* / DC DC / C / C 1 Momentary Push utton orn Switch 19mm diameter, for use with 6, 8, 10 and 12 button enclosures. Fits into large hole in enclosure, not button space esistive Load (Volts) mperage Wires* 125 / C / C 3 1 Pilot Light 22 mm diameter; takes up one button space. * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used. Voltage Wires* Colors vailable X-35181* 12 / DC 2 ed, mber, Green 36042* 24 VC / VDC 2 ed, Green, lue 34303* 110 / C 2 ed, mber, Green / C 2 lue only ** Insert Light Color, if not red: G=Green, =mber, =lue Examples: X = 12V DC, ed light X-35181G = 12V DC, Green light 9

80 Series Pendant Switches Maintained n/ff

Momentary Non-Interlocking Wires* Contact

Pole Momentary with Mechanical Interlock

10 * ypical wiring - for general information

7 80 Series Pendant Switches Maintained n/ff Wires* Contact Configuration Momentary Non-Interlocking Wires* Contact Configuration Dual Pole Momentary with Mechanical Interlock Wires* Contact Configuration * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used.

8 80 Series Pendant Switches Momentary 1-Speed with Mechanical Interlock Wires* Contact Configuration Momentary Single utton Wires* Contact Configuration Momentary 2-Speed with Mechanical Interlock Wires* Contact Configuration * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used Same as 34297, but with delayed opening of contacts 7 & 8 reak efore Make contact arrangement 11

80 Series Pendant Switches Momentary 3-speed with Mechanical and

Multi-Position Selector Switch 2 position and 3 position ther

Wires* Contact Configuration 37107 1 37108 1 34317 2 34318 2 34319 2 34320

9 80 Series Pendant Switches Momentary 3-speed with Mechanical and Electrical Interlock Wires * Contact Configuration Maintained Multi-Position Selector Switch 2 position and 3 position ther configurations available - contact factory. Wires* Contact Configuration * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used

utton Switch Wires* Contact Configuration

10 80 Series Pendant Switches Push Lock wist-elease Mushroom Switch Wires* Contact Configuration lternating Push utton Switch Wires* Contact Configuration * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used. 13

Part Number Wires* Contact Configuration

Configuration 1,000 34314 2 2,000 34314D

11 80 Series Pendant Switches oggle switch Note: Deep back enclosure required. Part Number Wires* Contact Configuration Variable Position esistor Max. esistance (ohms) Wires* Contact Configuration 1, , D 2 5, , C 2 lank plate * ypical wiring - for general information only. Number of wires will vary depending on the wiring method used.

12 80 Series ccessories, Spare Parts, and Jumpers Item Description Strain elief Clamp For Enclosures and Strain elief Clamp For Enclosures through S ook anger For Pendant Cables with Strain elief Cable ushing Collar, Small ushing Collar, Medium ushing Collar, Large For Pistol Grip and all 2 and 4 button pendants Cable.D ( mm) For 6 and 8 utton Enclosures, with Standard inlet. Cable.D.: ( mm) For 6, 8, 10, and 12 utton Enclosures with Large inlet. Cable.D.: ( mm) Switch oot ed Switch oot lack Switch oot Green Switch oot Cover Clear Deep ack Cover** 2 utton Enclosure Deep ack Cover** 4 utton Enclosure Deep ack Cover** 6 utton Enclosure Deep ack Cover** 8 utton Enclosure Deep ack Cover** 10 utton Enclosure Deep ack Cover** 12 utton Enclosure ** Includes the back over piece only Jumpers (Used n ne Switch) n switch and to connect terminals 1 and 5. Jumpers (Used From Switch to Switch) o connect common between standard back selector, keyed, and mushroom switches. Jumper Label J80-01 o connect between 1-speed, 2-speed, 3-speed, and N/FF switches J80-02 n all 2-speed switches to connect terminal 6 to 4 and 14 to 16. n 2-speed switches to connect terminal 5 to 15. For connecting common between 2-speed switches by connecting terminal 16 of one switch to terminal 6 of adjacent switch. n all 3-speed switches to connect terminal 18 of two adjacent 3-speed switches and to connect terminal 8 of two adjacent 3-speed switches. o connect common of a maintained N/FF switch to adjacent 1-speed, 2-speed, or 3-speed switch J J J J

16 80 Series Legend Sheets Vertical Legend - 34327 S P N F F I S

I S M #1 #2 G E V C U U M L I F E E M N W N I N G Selector Switch Legend #1-35300 Selector Switch Legend #2-37228

ne sheet is automatically included with each pre-assembled pendant 34326 Mushroom Switch Legend For mushroom switches

13 16 80 Series Legend Sheets Vertical Legend S P N F F I S I D G E L L E Y M G N E C N E D L I G M. I S. I S M #1 #2 G E V C U U M L I F E E M N W N I N G Selector Switch Legend # Selector Switch Legend # Legend/Sticker Usage utton Legend For push button marking. ne sheet is automatically included with each pre-assembled pendant Mushroom Switch Legend For mushroom switches Warning Sticker n/a Vertical Legend For case marking (Contact factory for legends sheets not listed.) Selector Switch Sheet #1 For case marking of selector switches Selector Switch Sheet #2 For case marking of selector switches utton Legend Mushroom Switch Legend Warning Sticker

14 80 Series Pistol Grip 80 Series Pistol Grip he Conductix-Wampfler 80 Series Pistol Grip Pendants feature a compact, ergonomic design with the operator s comfort in mind. hey are available with 1, 2, or 3 speed buttons. It is equipped to accommodate either internal or external strain relief cable. CVS ushing Collar (with Collar Screws) UL/cUL Listed for indoor use only Features: igh impact, yellow S enclosure Multi-diameter cable bushing inlet ated NEM 4 (IP65); suitable for indoor or outdoor use Speed 1 C81P 2 C81P 3 C81PC 80 Series Pistol Grip, with 3 utton oles Same as the C81, except that the top hole in the C81.5P unit has an emergency stop button. Speed 1 C81.5P 2 C81.5P 3 C81.5PC Note: E-Stop contact is 1N & 1NC 17

15 C Conductix-Wampfler 2013 Subject to echnical Modifications Without Prior Notice US F Street maha, NE US Distributed by ri-state Equipment Company Inc. sales@tsoverheadcrane.com Web: P: FX:

80 Series Push Button Pendant Features

80 Series Push Button Pendant Features 80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get