QuickSpecs. Compaq Rack Accessories

Transcription

1 Compaq offers a wide variety of rack accessories that help you to configure Compaq Racks. For more information go to or Compaq Flat Panel Monitor Rackmount TFT5010R (North America) (Japan) B31 (Int'l) NOTE: A space-saving 15² TFT flat panel monitor mounted in a retractable 2U drawer - saving 7U or more in the rack, allows customers to maximize the density of their rack with additional Compaq servers, storage, networking or power protection products. This product will be replaced with the TFT5110R. TFT5110R B21 Worldwide NOTE: This product is the first generation 1U retractable TFT flat panel monitor. It provides a full 15" viewing screen when needed and tucks away in only 1U of rack space when not being used. The product has been designed to allow a switchbox to mount behind it on the rails - further maximizing rack space. This product has optional input device adjustable rails ( B21) and input device telco rails ( B21) for mounting this product in third party racks. This product will replace the TFT5010R ( XX1). Integrated Keyboard and Drawer Part number: NA UK GR FR ITL SP DEN NOR SWE/FIN SWI PORT BEL JPN B31 INTL NOTE: The integrated keyboard and drawer is the first generation "all-in-one" device. It provides a full functionality keyboard with 9 programmable hot keys for quick movement from one server to the next. The product has been designed to allow a switchbox to mount behind it on the rails - further maximizing rack space. This product has optional input device adjustable rails ( B21) and input device telco rails ( B21) for mounting this product in third party racks. This product will replace the stand alone keyboard drawer ( B21) and keyboard with hot keys and trackball ( XXX). Monitor/Utility Shelf Part number: B21 (opal) B21 (graphite) NOTE: This 1U fixed shelf can be mounted at any height to place a monitor or another component within the rack. The monitor/utility shelf has a maximum weight capacity of 150 lb (68 kg) and ships with bezels for both a 15" and 17" monitor. DA Worldwide Version 24 September 4, 2003 Page 1

2 Compaq TFT5600 RKM US UK GR FR ITL SP DEN NOR SWE/FIN SWI PORT BEL JPN B31 - Int'l The Compaq TFT5600 RKM provides a full 15" digital display and hot keys keyboard in only 1U. Plus allows enough room to mount a Compaq switchbox behind it. Nine programmable hot keys run across the top of the keyboard with the programming wizard key in the far right corner. The hot keys work with Compaq switchboxes allowing for rapid movement between rack mounted devices. This product has optional input device adjustable rails ( B21) and input device telco rails ( B21) for mounting this product in third party racks. 1U Keyboard Drawer B21 NOTE: This space-saving 1U drawer neatly holds, protects, and conceals an Internal Keyboard with Integrated Trackball. It provides the option to mount a Compaq switch box behind drawer to save additional 1U of rack space. It can be mounted at any height within Compaq Racks and is mounted on slides that allow you to pull the drawer in and out of the rack. This product will be replaced with the integrated keyboard and drawer ( XX1). Keyboard with Hot Keys and Trackball U.S UK GR FR ITL SP DAN NOR SWE/FIN SWI PORT BEL JAP B36 - Int'l NOTE: This keyboard with integrated trackball fits neatly inside the 1U Keyboard Drawer. The keyboard also has a programmable wizard key used to program up to seven keystrokes for each of the nine hot keys. These hot keys will allow users to quickly move between rack-mounted devices. This product will be replaced with the integrated keyboard and drawer ( XX1). Depth Adjustable Fixed Rail Kit B21 NOTE: The kit contains two, 19² to 31², depth adjustable rails that mount Compaq rack-mountable servers, storage boxes, UPSs, and Compaq networking products in third-party racks. The Depth Adjustable Fixed Rail Kit also allows for most third-party, rack-mountable products to be mounted in Compaq Racks. The depth adjustable fixed rails have a maximum weight capacity of 300 lb (136 kg). DA Worldwide Version 24 September 4, 2003 Page 2

3 Blanking Panel Kit B21 - Opal (9000 Series) - Contains one each of a 1U, 2U, 4U and 8U panel B21 - Opal (9000 Series) - Contains 10 of the 1U panel B22 - Opal (9000 Series) - Contains 10 of the 2U panel B23 - Opal (9000 Series) - Contains 10 of the 3U panel B24 - Opal (9000 Series) - Contains 10 of the 4U panel B25 - Opal (9000 Series) - Contains 10 of the 5U panel B26 - Graphite (10000 Series) - Multi - Contains one each of a 1U, 2U, 4U and 8U panel B21 - Graphite (10000 Series) - Contains 10 of the 1U panel B22 - Graphite (10000 Series) - Contains 10 of the 2U panel B23 - Graphite (10000 Series) - Contains 10 of the 3U panel B24 - Graphite (10000 Series) - Contains 10 of the 4U panel B25 - Graphite (10000 Series) - Contains 10 of the 5U panel NOTE: Blanking panels are sheet metal plates that are used to cover open spaces in the rack to facilitate proper airflow. Sidewall Panel Kits B21 (Opal) (9142 Rack) B21 (Opal) (9136 Rack) (Beach Grey) (7142 Rack) B21 (Graphite) (47U Series Rack) B21 (Graphite) (42U Series Racks) B21 (Graphite) (36U Series Racks) NOTE: The 22U racks ship with side panels installed standard. Sidewall Panel Kits are optional for all other height racks. NOTE: The side panels for the series rack are lockable. NOTE: The 9000 series side walls CAN NOT be used on the series racks and the series side walls CAN NOT be used on the 9000 series racks. Rack Stabilizer Kits B21 (Opal) (9000 Series Rack) (Beach Grey) (7000 Series Rack) B21 (800mm, Opal) (Rack 9842 only) B21 (600mm, Graphite) (10000 Series Rack) B21 (800mm, Graphite) (10000 Series Rack) NOTE: The stabilizer kit is required for stand-alone 42U and 36U racks (order one kit per Rack). NOTE: The 9000 series stabilizer kits CAN NOT be used on the series racks and the series stabilizer kits CAN NOT be used on the 9000 series racks. Rack Coupling Kits B21 (Opal) (9000 Series Rack) B21 (Carbon) (10000 Series Rack) NOTE: Coupling kit connects multiple racks of the same height, minimizing usage of floor space. Offset Baying Kit B21 (9000/1000 Series Rack 42U) NOTE: Offset Baying kit connects a 42U 9000 series rack and a 42U series rack, minimizing usage of floor space. DA Worldwide Version 24 September 4, 2003 Page 3

4 Keyboard, Monitor, and Mouse Extension Cables NOTE: Provide even greater flexibility in the location of a keyboard, monitor, and mouse through 6-foot (2-meter) cable extensions. Keyboard/Video/Mouse Switch Box (1x2 Port U.S.) B31 (1x2 Port Int'l) (1x2 Port Japan) (1x4 Port U.S.) B31 (1x4 Port Int'l) (1x4 Port Japan) (1x8 Port U.S.) B31 (1x8 Port Int'l) (1x8 Port Japan) (2x8 Port U.S.) B31 (2x8 Port Int'l) (2x8 Port Japan) B21 (2x8 Port 48 V DC WW) B21 (KVM 9 PIN Adapter, 4 Pack) NOTE: This 1U programmable scanning switch box is used to switch a single keyboard, monitor, and mouse among up to four (4-port) or eight (8-port) ProLiantä servers. It routes all cables through the back of the rack cabinet and shows status information via on-screen display. For maximum convenience, switch boxes can be tiered to support up to 16 (4-port) or 64 (8-port) servers from a single console. Switch Box Connector Kit (115 V) (North America) (230 V) (North America) B33 (100 to 240 V) (Int'l) NOTE: This kit provides frontal access to a 2/4/8-port switch box for a keyboard, monitor, mouse, and power cord. CPU to Switch Box Cable B24 (3 foot (1 meter)) B25 (7 foot (2 meter)) B21 (12 foot (4 meter)) B22 (20 foot (6 meter)) B23 (40 foot (12 meter)) B21 (20 foot plenum (6 meter)) B21 (40 foot plenum (12 meter)) NOTE: This cable allows flexibility in connecting servers to a switch box by providing 3 feet to 40 feet (1 to 12 meters) of cable. Compaq Networking Cable Management Kit B21 NOTE: This kit provides an easy way to organize and route cables within Compaq Racks. Cable clips, cable rings, and 1U and 2U access panels are included. DA Worldwide Version 24 September 4, 2003 Page 4

5 Compaq Networking Recessed Rail Management Kit B21 NOTE: This kit provides mounting options that let you recess equipment to allow adequate room for cables that protrude from connection ports within a rack. Two sets of 4U, 7U, 15U, and 28U rail fractions are included. High Airflow Door Insert B21 (Single Pack for Rack U) B22 (6-pack for Rack U) B21 (Single Pack for Rack U) NOTE: The High Airflow Door Insert is a mesh front door used to replace the lexan glass in the 7000 Series rack to promote greater cooling within the rack. Extension Kit B (42U 9000 Series Rack) B (36U 9000 Series Rack) B (42U 7000 Series Rack) - Contains two sleeves NOTE: In the 9000 Series, the extension kit comes with one sleeve that mounts on the rear of the rack providing an additional 3.5² of room in the rack. In the 7000 Series, this option kit comes with two sleeves that can be mounted either in the front or rear of the rack to provide additional room for equipment or cabling. Ballast Kit B21 NOTE: For use with the 9000 Series rack, this option kit is designed to provide additional stability and support when used with the stabilizer kit. It is typically used when very heavy equipment is routinely installed, removed or accessed within the rack. DA Worldwide Version 24 September 4, 2003 Page 5

6 Short Rear Door B (Opal) B (Opal) NOTE: These short rear doors can be used to replace the full-size doors that are shipped with the 9000 Series rack. These doors provide about seven inches of space at the bottom of the rack to allow large amounts of cabling to be routed out of the rack while still maintaining the security of a locking door. Split Rear Door B (Opal) NOTE: This option is offered on the 600mm wide, 42U 9000 series rack to allow full access to rack mounted equipment without blocking rack aisles. In addition, a removable panel allows for cable routing out of the bottom of the rack. Rack Rail Adapter Kit (25") B21 NOTE: Adapters for mounting equipment at the 25" depth level within the rack (traditional equipment depth is 29² for ProLiant and 25" for AlphaServer systems). Copyright 2003 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA Worldwide Version 24 September 4, 2003 Page 6