Intel Server Board SE7500CW2 Production v1.27 BIOS Release Notes

Transcription

1 Enterprise Platform & Services Marketing Intel Corporation NE 25 th Avenue Hillsboro, OR DATE: May 6, 2003 TO: Intel Server Board SE7500CW2 customers SUBJECT: Intel Production BIOS Release Notes Production Build #: v1.27 Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright 2001, 2002, 2003 Intel Corporation. About This Release Release # : 1.27 Build Stamp : SE7500CW20.86B.0033.P Build Date : May 6th, 2003 Checksum : 8072 BIOS Components/Contents PXE Ver. : PXE 2.1 Build 083(WfM 2.0)RPL V2.74, Boot Agent Version Promise Ver. : Promise PDC VGA Ver. : ATI* RAGE* XL GR-xlamis3y BIOS Base : Phoenix 4.0 release 6.0 Processor stepping s supported: Intel Xeon Processors 1.8 GHz, 2.0 GHz, 2.2 GHz, 2.4 GHz, 2.6 GHz, 2.8 GHz, 3.0 GHz {SE7500CW2} 1

2 Supported functionality in this BIOS Four DIMMs DDR200/DDR266 Dual Intel Xeon processors with 400MHz system bus speed Multi-boot support System Flash BIOS ROM SerialA/SerialB port CD-ROM boot Floppy port PCI 32 bit slot/pci-x 64bit slot ATI Rage XL VGA Promise* IDE RAID Dual Intel 82559PM Network controller Clear CMOS Legacy Power button ACPI Support USB devices, Wake-up on LAN / Wakeup on Ring and RTC Alarm under Windows* 2000 ACPI mode Setup screen Summary screen during POST SMBIOS 2.3 function Legacy USB keyboard / mouse / Floppy / CDROM / HD BIOS Recovery mode from Floppy with video Clear password ARM (ATAPI Removable Media) / IRM (IDE Removable Media) ACPI SPCR (Serial Port Console Redirection) Important Installation/Upgrade Notes Run BIOS.exe (type: BIOS A: <enter>) to extract phlash.exe, platform.bin, 1.bat and BIOS.rom to a 1.44 floppy diskette. (double-click the BIOS.exe and copy files to a bootable diskette from desktop if the bios a: command fails) Boot the system to DOS mode. (If booting to Resource CD, press F5 when starting ROM-DOS to bypass loading CONFIG.SYS) Run A:> 1.bat When BIOS flash is over it will show message and beep, then reboot. Note: The boot to DOS must be non-himem management environment. Known Issues/Workarounds Microsoft NT* 4.0 can be installed successfully. But there exists some issue that sometimes system will hang at reboot point during installation. If system hangs at reboot point, user can continue to install it by restarting system. {SE7500CW2} 2

3 Issues fixed since last release. Intel Server Board SE7500CW2 This BIOS release 1.27 is based on Defect# The screen is black when disabled floppy disk controller in BIOS Setup. Upgrade the micro code for B0 stepping of CPU (CPUID=F24) and C1 stepping of CPU (CPUID=F27). 1. For B0 stepping of CPU: Patch ID=10h Patch ID=1dh Date: 07/19/2002 Date: 01/16/ For C1 stepping of CPU: Patch ID=28h Patch ID=34h Date: 07/22/2002 Date: 11/06/2002 Adjust the based value of ambiance temperature from zero to -8 degrees Celcius. Fix the bug Display incorrect value of speed in SETUP <F2> menu [System CPU] during installing 3.0GHz CPU (400MHZ LV). Features added in this release. Add the function Support HDD 48bit LBA. pful Reference Material Intel Server Board SE7500CW2 Product Guide v1.1 Intel Server Board SE7500CW2 BIOS EPS v1.0 {SE7500CW2} 3

4 BIOS Recovery Instructions The crisdisk.exe content: CRISDISK.BAT - Executable file for creating the crisis recovery diskette. PHLASH.EXE - Programs the flash ROM. BIOS.ROM - Actual BIOS image to be programmed into flash ROM. MINIDOS.SYS - Allows the system to boot in crisis recovery mode. MAKEBOOT.EXE - Creates the custom boot sector on the crisis recovery diskette. WINCRIS.EXE - Creates the crisis recovery disk under Windows NT/2000/95/98. WINCRIS.HLP - Help file for WINCRIS.EXE Under DOS environment: o Boot the system to pure DOS mode. o Insert a clean diskette into drive A: o From the local directory, enter the following: C:\PHLASH> CRISDISK.BAT o The CRISDISK.BAT formats the diskette, then copies MINIDOS.SYS, PHLASH.EXE, PLATFORM.BIN and BIOS.ROM to the diskette, and creates the required custom boot sector. Set diskette as "Write protect" and label it as "the Crisis Recovery Diskette". Under Windows NT*, Windows* 2000, 95, and 98 environment: o Boot to Windows. o Execute C:\PHLASH>WINCRIS.EXE Note: 98. This will not build a recovery diskette by running CRISDISK.bat from the DOS prompt under Windows NT*, Windows* 2000, 95, and It will result in failure recovery diskette. Please follow the steps to force to execute BIOS recovery. Auto recovery: o If ROM checksum is error during POST, do BIOS recovery. User Recovery: o Power off system. o Plug jumper to motherboard J106 pin 3-4. o Insert recovery diskette to floppy o Power on system. o System will beep during recovery. o After no beep, the recovery is OK. o Power off system o Remove jumper from motherboard J106 pin 3-4. {SE7500CW2} 4

5 Safety Notice ** THE INTERNAL WORKINGS OF SDV AND OEM UNIT CARRY ** HIGH VOLTAGES DESPITE BEING POWERED DOWN BY FRONT PANEL. ** ** IF YOU ARE NOT FAMILIAR WITH THE INTERNALS OF OEM ** OR SDV UNIT YOU MAY WANT TO UNPLUG BOTH POWER CORDS ** TO THE UNIT BEFORE ACCESSING THE LEGACY I/O CARD WHICH ** HAS THE BOOTBLOCK RECOVERY JUMPER. {SE7500CW2} 5