RESERATOR FAN KIT ZM - RF1. (English version) for Higher Water Cooling Performance

Size: px

Start display at page:

Download "RESERATOR FAN KIT ZM - RF1. (English version) for Higher Water Cooling Performance"

Norah Hodges
5 years ago
Views:

1 (English version) ZM - RF1 RESERATOR FAN KIT for Higher Water Cooling Performance Please visit our website and watch the ZM-RF1 installation video for easy installation. Please read this manual thoroughly before installation.

2 Precautions 1) This product cannot be used by itself and must be used with Zalman s RESERATOR 1 or RESERATOR 1 Plus. 2) Do not place in dusty or humid conditions, under direct sunlight, or near a heat source such as a room heater. 3) Do not drop or exert excessive force on the product. 4) Do not place paper or other objects on top of the product. They may cause product damage. 5) Do not let coins or other objects enter the product. 6) Familiarize yourself with this manual. 7) Please check that the motherboard's fan output specifications are compatible with the fan s power requirements. Disclaimer Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. 1. Features 1) Equipped with a larger fan and a vertical duct structure, The ZM-RF1 provides optimal cooling performance by supplying sufficient airflow to the Reserator s fins. 2) Lightweight and durable, and fine external appearance achieved with the use of its transparent and strong plastic material. 3) Excellent cooling performance and tuning effects achieved in Silent Mode with the use of a 140mm LED fan. 4) Adjustable fan speed controller (FAN MATE 2) included for noise control and fan speed adjustment. 5) Easy installation. 1

3 2. Specifications 1) Duct Assembly - Dimensions : 163.5(L) X 163.5(W) X 190(H)mm - Materials : Poly Carbonate(Duct, Fan Support), ABS Polymer(Grill) - Weight : 334g 2) Fan - Dimensions : 140(L) X 140(W) X 25(H)mm - Bearing Type : 2-Ball Bearing - Rotation Speed : 750rpm 10% (Silent Mode) 1600rpm 10% (Normal Mode) - Noise Level : 20dB 10% (Silent Mode), 31dB 10% (Nomal Mode) - Operating Voltage : 5V/0.1A ~ 12V/0.4A - Power Consumption : 5W or lower 3) FAN MATE 2 (Fan Speed Controller) - Dimensions : 70(L) X 26(W) X 26(H)mm - Output Voltage : 5V ~ 11V 2% - Power Consumption : 6W or lower 3. Components 1) Duct Assembly 2) FAN MATE 2 (Fan Speed Controller) 3) Double-Sided Tape (for installing FAN MATE 2) 4) Three(3) Clips (for Cable Fixing) 5) User s Manual 2

4 4. Installation 1) Duct Assembly Installation - While holding the Duct Assembly with both hands, align the Duct Assembly's Insert Holes with the Reserator's Round Fins, and mount the Duct Assembly over the Reserator. note 1) The 4 Round Fins must be inserted into the 4 Insert Holes simultaneously. note 2) If mounting cannot be done smoothly,try rotating the Duct Assembly 90 degrees at a time while mounting. note 3) Make sure that the fan cable does not get stuck between the Duct Assembly and the Reserator fins. note 4) Install slowly in order to prevent product damage. Duct Assembly Insert Hole Round Fin Reserator 2) Fan Cable Fixation - Fix the fan cable into place with cable fixing clips as shown in the diagram. note 1) The Clip should be inserted into the groove on the left side of the Round Fins. Place the cable on the left side of the Round Fin and gently push in the Clip. note 2) The 3 enclosed Clips are meant for tidying the fan s cable. The Clips must be attached to the top, middle, and bottom sections of the Reserator. 3) FAN MATE 2 Connection and Use - Connect the 3 pin connector of FAN MATE 2 with the 3 pin CPU Fan connector of the motherboard. - Connect the 3 pin connector of FAN MATE 2 with the 3 pin connector of the fan. - When the Fan Speed Control Knob on FAN MATE 2 is fully turned in the counter-clockwise direction, the fan operates in Silent Mode. If fully turned in the clockwise direction, it operates in Normal Mode. You can set Control Knob your desired fan speed by adjusting the knob Round Fin Motherboard Fan Cable Fan Speed Control Knob 3Pin CPU Fan Connector 3 Clip Clip 3Pin Connector of Fan

Zalman Noise Prevention System Stable performance and noiseless liquid cooling system

fan, Northbridge water block, and heat pipe hard disk cooler.

D Cooler TNN(Totally No Noise) Computer Case TNN 300 TNN 500AF TNN Computer Enclosures

They are ideal for environments that require silence, as well as for home theatre

Home Theater PC Enclosures HD 160 The HD160 is designed for ultra quiet home theatre

5 Zalman Noise Prevention System Stable performance and noiseless liquid cooling system can both be achieved with the use of Zalman s noiseless power supply, noiseless case fan, Northbridge water block, and heat pipe hard disk cooler. Noiseless Power Supply Noiseless Case Fan Northbridge Water Block Heatpipe H.D.D Cooler TNN(Totally No Noise) Computer Case TNN 300 TNN 500AF TNN Computer Enclosures are the world s first environment-friendly noiseless computer enclosures that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself as a heatsink. They are ideal for environments that require silence, as well as for home theatre systems and multi-media systems. Home Theater PC Enclosures HD 160 The HD160 is designed for ultra quiet home theatre PC operation. It utilizes optimized ventilation and anti-vibration reinforcements, making it ideal for environments that require silence such as living rooms, bedrooms, educational facilities, and offices. For more information, please visit our website. 4

VGA RAM WATER BLOCK for Higher Water Cooling Performance

(English version) ZM-RWB1 VGA RAM WATER BLOCK for Higher Water Cooling Performance Please visit our website www.zalman.co.kr and watch the ZM-RWB1 installation video for easy installation. Please read