Installation and User Manual. version 1.00 MODWF 2014/53/UE EN : /30/UE EN55022:2010 EN :2005 EN :2007

Size: px
Start display at page:

Download "Installation and User Manual. version 1.00 MODWF 2014/53/UE EN : /30/UE EN55022:2010 EN :2005 EN :2007"

Transcription

1 Installation and User Manual version 1.00 MODWF 2014/53/UE EN : /30/UE EN55022:2010 EN :2005 EN :2007 SYSTEM IDENTIFICATION Load Cell Systems reserves the right to change specifications without notice Web: Phone:

2 KEY TO SYMBOLS Below are the symbols used in the manual to draw the reader's attention: Warning! Risk of electrocution. Warning! This operation must be performed by skilled workers. Read the following indications carefully. Further information. GUARANTEE 24 months from the delivery document date. The guarantee covers only defected parts and includes the replacement parts and labour. All shipping and packing costs are paid by the customer. It is possible to have the repair in guarantee on condition that the returned product has not been transformed, damaged or repaired without authorization. No guarantee is applicable on returned products without the original label and/or serial number. No guarantee against misuse. Batteries: LCS provides 1 year guarantee from the date of delivery note, against material defects or battery manufacturing faults. Disposal of Waste Equipment by Users in Private Households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. It is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help preserve natural resources and protect human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local waste disposal Authority or the equipment retailer.

3 TABLE OF CONTENTS USER WARNINGS... 1 MAIN SPECIFICATIONS OF THE INSTRUMENT... 1 TECHNICAL SPECIFICATIONS... 1 ELECTRICAL CONNECTIONS... 2 WIRING DIAGRAM... 2 LED AND KEY FUNCTION... 3 MENU MAP... 3 SYSTEM PARAMETERS... 3 INSTRUMENT COMMISSIONING... 4 PROGRAMMING OF SYSTEM PARAMETERS... 4 WIFI COMMUNICATION SETTING... 4 SERIAL COMMUNICATION SETTING... 9 RS232 SERIAL COMMUNICATION...9 RS485 SERIAL COMMUNICATION...9 CONNECTION TO PC BY VIRTUAL WIFI/ETHERNET PORT ENERGY SAVING ALARMS AND MESSAGES CONCERNING THE WIFI MODULE OPTIONS OPZBATTWF: INTERNAL BATTERY BATEXT: EXTERNAL BATTERY CONNECTING THE BATTERY TO THE INSTRUMENT OPZWFIP67: IP67 VERSION RESERVED FOR THE INSTALLER KEYPAD OR DISPLAY LOCKING... 14

4 USER WARNINGS RECOMMENDATIONS FOR THE PROPER USE OF WEIGHING INSTRUMENT - Keep away from heat sources and direct sunlight - Repair the instrument from rain (except special IP versions) - Do not wash with water jets (except special IP versions) - Do not dip in water - Do not spill liquid on the instrument - Do not use solvents to clean the instrument - Do not install in areas subject to explosion hazard (except special Atex versions) MAIN SPECIFICATIONS OF THE INSTRUMENT WiFi/serial transceiver. Protection rating IP65 (optional: IP67). Dimensions: 170x80x65 mm; four fixing holes Ø 4 mm (centre distance 120x60 mm). Backlit alphanumeric LCD display, 38x16 mm viewing area, two-line by eight-digit (5 mm height). Six indicator LEDs. 4 key membrane keypad. Two serial ports (RS485 and RS232) for connection to PC/PLC up to 32 instruments (max 99 with line repeaters) by LAUMAS and Modbus RTU protocols. WiFi connectivity: allows the Wi-Fi communication between two serial devices. The MODWF can communicate in a bidirectional way with: - Existing WiFi networks. - Other MODWF instruments. - Other Load Cell Systems instruments equipped with WiFi communication. TECHNICAL SPECIFICATIONS POWER SUPPLY and CONSUMPTION 12/24 VDC ±10%; 1 W SERIAL PORTS RS485, RS232 BAUD RATE 2400, 4800, 9600, 19200, 38400, WIRELESS WiFi module with serial protocols in tunnel mode RANGE about 100 meters line of sight HUMIDITY (non condensing) 85% STORAGE TEMPERATURE -30 C +80 C WORKING TEMPERATURE -20 C +60 C - 1 -

5 RS485 RS485 GND VDC RS232 TXD RS232 RXD GND - + ELECTRICAL CONNECTIONS TERMINAL 1 GND 2 +SUPPLY (12/24 VDC) 3 RS232: TXD 4 RS232: RXD 5 GND 6 RS485-7 RS485 + WIRING DIAGRAM /24 VDC supply - 2 -

6 LED AND KEY FUNCTION LED 1 reception by RS232 port 2 reception by RS485 port 3 reception by WiFi network 4 transmission by RS232 port 5 transmission by RS485 port 6 transmission by WiFi network Function KEY Function Cancel or return to previous menu Select figure to be modified or go to previous menu item. Modify selected figure or go to next menu item Confirm or enter in submenu Into menus LEDs light up in sequence to indicate that it is not displaying a weight. MENU MAP Into menus changes are applied right after pressing the ENTER key (no further confirmation is required). SYSTEM PARAMETERS

7 INSTRUMENT COMMISSIONING Upon switch-on, the display shows in sequence: - instrument model (e.g.: ); - followed by the software code (e.g.: ); - program type: (base); - followed by the software version (e.g.: ); - followed by the hardware code (e.g.: ); - serial number (e.g.: ); Setting the parameters related to: - serial communication (see section SERIAL COMMUNICATION SETTING) - WiFi communication (see section WIFI COMMUNICATION SETTING) PROGRAMMING OF SYSTEM PARAMETERS From the weight display, press simultaneously keys MENU and ESC to access the parameter setting. MENU/ENTER: to enter a menu/confirm the data entry. : to modify the displayed figure or menu item. : to select a new figure or modify the displayed menu item. ESC: to cancel and return to the previous menu. WIFI COMMUNICATION SETTING The instrument can operate as access point or client. WARNING: both operating modes (access point and client) use communication port In point-to-point communication, an instrument configured as access point generates the network to which the instrument configured as client connects itself. If the client is correctly connected to the network, it shows the message LINKED, otherwise it shows the message READY!; the access point always shows the message READY!. When the device connected to the client communicates and the one connected to the access point replies, on both displays the message TX<-->RX appears

8 For the connection you can use both a web-socket and a virtualization software of the serial ports on ethernet (see section CONNECTION TO PC BY VIRTUAL WIFI/ETHERNET PORT). If the connection to the network fails, make sure that the distance between the instruments does not exceed 100 meters in open air and/or ensure that no shield or noise affect the antennas. It is recommended to place the client instrument in an easily accessible position, in case an operator needs to check any communication problems. OPERATION AS CLIENT connecting the instrument to an existing network + - : enables the operation of the instrument as a client in a CLIENT/SERVER or CLIENT/ACCESS POINT network. - : network name (it must consist of only numbers; e.g.: ). - : instrument IP address. - : access point IP address. - : login password of the access point; if no password is required, set 0. Any password must be an 8-digit number that starts with two zeros; e.g.: (only the underlined digits can be displayed and modified by the instrument). In order to apply the changes, turn the instrument off, wait for 10 seconds and turn it back on. OPERATION AS ACCSS POINT connecting other devices to the network created by the instrument + - : network name (it must consist of only numbers; e.g.: ). - : access point IP address. - : login password of the access point; in order to leave the connection open set Any password must be an 8-digit number that starts with two zeros; e.g.: (only the underlined digits can be displayed and modified by the instrument). In order to apply the changes, turn the instrument off, wait for 10 seconds and turn it back on

9 EXAMPLES OF COMMUNICATION PARAMETERS SETTING Instrument connection to an existing WiFi network (with password). WiFi network SSID Access point address (HOST) Password Instrument configured as client YES Direct connection (point-to-point) between pc and instrument (without password). Instrument configured as access point NO Pc configured as client SSID Access point address (HOST) Password - 6 -

10 Direct connection (point-to-point) between two instruments (with password). Instrument configured as access point NO Instrument configured as client YES

11 Direct connection (point-to-point) via Modbus RTU between instrument and other Load Cell Systems devices equipped with WiFi option (without password). LCS device equipped with WiFi option configured as access point NO MODBUS Instrument configured as client YES

12 RS485 + RS485 - GND RS485 + RS485 - GND RS485 + RS485 - GND - / : communication port. SERIAL COMMUNICATION SETTING + - : it disables any type of communication (default). - : enables the tunnel mode on the selected serial port (communication parameters: data bit: 8, parity bit: none, stop bit: 1). - : transmission speed (2400, 4800, 9600, 19200, 38400, ; default: 9600). The communication parameters set on the instruments connected via serial port must be the same. RS232 SERIAL COMMUNICATION INSTRUMENT RS232 TXD RS232 RXD GND PC DB9-F RS485 SERIAL COMMUNICATION RS485 DEVICE RS485 DEVICE RS485 DEVICE max 500 m WIFI MODWF RS485 + RS485 - GND - 9 -

13 CONNECTION TO PC BY VIRTUAL WIFI/ETHERNET PORT A PC, by a virtual serial port, can be connected to the MODWF via WiFi. To install the virtual COM port, use the CPR Manager included in the supply: - run the file CPR.exe on the CD; - add a serial port; - set an IP address (host) and a TCP port (10001); - save. Use the just created virtual COM port to communicate with the instrument connected to the MODWF using the selected protocol. Alternatively connect to the MODWF using a socket (e.g.: Winsock) on port

14 ENERGY SAVING + - : energy saving mode disabled (default). - : the display enters energy saving mode after two minutes of keypad inactivity; by pressing a key normal operations will be restored. - (only if relays are not in use): the display, the WiFi module and the load cells enter energy saving mode after two minutes of keypad, serial ports or WiFi module inactivity; normal operations will be restored by pressing a key or when data are received by the serial ports. The energy saving mode is activated also if an outgoing monodirectional protocol is set. (e.g.: or ). Note: the energy saving options turn off the devices involved. ALARMS AND MESSAGES CONCERNING THE WIFI MODULE The bottom line of the instrument display shows the WiFi module status and the battery option. : : READY!: LINKED: TX<-->RX: the instrument is storing and checking the entered settings; wait until the message has disappeared to proceed. during the settings storage and check some error occurred; verify and enter the last settings again. the instrument is ready to comunicate. the instrument configured as client is connected to the access point. the device connected to the instrument is communicating via WiFi

15 OPTIONS OPZBATTWF: INTERNAL BATTERY - Battery pack made up of eight 1.2 V NiMH rechargeable elements, type AA, 2450 mah capacity, supplied already installed in the instrument, with dedicated external switch (overall size: 190x80x65 mm). - To achieve maximum battery efficiency, run three full charge/discharge cycles on new batteries and keep working temperature within 45 C. - The battery is automatically recharged every time the instrument is powered by an external 24 VDC power source; a full charge takes about 20 hours. - The instrument is battery powered only when not mains powered. - Battery power supply may be disabled through the dedicated switch. - The bottom line of the instrument display shows the battery status: : charging in progress. : charging finished. : charging problems, replace the battery pack. - Use the functions of the menu to optimize battery lifetime (see section ENERGY SAVING). Mode Maximum operating time (hours) 4 load cells (350 ohm), energy saving: 24 4 load cells (350 ohm), energy saving: 11 4 load cells (350 ohm), energy saving: 10 Approx. maximum operating time for typical use with fully charged battery

16 BATEXT: EXTERNAL BATTERY - 12 V rechargeable lead battery, 2200 mah capacity, supplied in IP67 box (dimensions: 160x80x85 mm). - The battery is automatically recharged every time the instrument is powered by an external 24 VDC power source; a full charge takes about 8 hours. - The instrument is battery powered only when not mains powered. - Two LEDs inside the IP67 box show the battery status: green LED lit: charging in progress. red LED lit: charging problems, replace the battery pack. Use the functions of the menu to optimize battery lifetime (see section ENERGY SAVING). Mode Maximum operating time (hours) 4 load cells (350 ohm), energy saving: 26 4 load cells (350 ohm), energy saving: 13 4 load cells (350 ohm), energy saving: 12 Approx. maximum operating time for typical use with fully charged battery. CONNECTING THE BATTERY TO THE INSTRUMENT Attach the connector on the left to the instrument and the connector on the right to the power supply. Two flying connectors are supplied for the connections, which must be wired as follow (outer diameter of the cable: 6 10 mm): Male connector Instrument 1 GND 2 +SUPPLY Female connector Power supply 1 GND 2 24 VDC OPZWFIP67: IP67 VERSION The instrument is not equipped with the side hinge; a flying connector is supplied for the power supply, which must be wired as follow (outer diameter of the cable: 6 10 mm): Flying connector Power supply 1 GND 2 24 VDC

17 RESERVED FOR THE INSTALLER KEYPAD OR DISPLAY LOCKING Press ESC immediately followed by hold them down for about 5 seconds (this operation is also possible via the MODBUS and ASCII protocols): - : no lock. - : keypad lock: if active, when a key is pressed the message is displayed for 3 seconds. - : keypad and display lock: if active, the kaypad is locked and the display shows the instrument model; by pressing a key the display shows for 3 seconds. Load Cell Systems reserves the right to change specifications without notice Web: sales@loadcellsys.com Phone:

ENGLISH ENGLISH ENGLISH ENGLISH

ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH User Manual version 1.07 OPTIONS for W SERIES weight indicators KEY TO SYMBOLS Below are the symbols used in the manual to draw the reader's attention: Caution! High Voltage.

More information

ENGLISH ENGLISH ENGLISH ENGLISH. Installation and User Manual. version 1.00 MODWF 2014/53/UE EN :2016

ENGLISH ENGLISH ENGLISH ENGLISH. Installation and User Manual. version 1.00 MODWF 2014/53/UE EN :2016 ENGLISH ENGLISH ENGLISH ENGLISH Installation and User Manual version 1.00 MODWF 2014/53/UE EN300 328:2016 2014/30/UE EN55022:2010 EN61000-6-2:2005 EN61000-6-4:2007 SYSTEM IDENTIFICATION KEY TO SYMBOLS

More information

Installation and User Manual version 1.04 TLM8 2014/30/UE EN55022:2010 EN :2005 EN :2007 SYSTEM IDENTIFICATION

Installation and User Manual version 1.04 TLM8 2014/30/UE EN55022:2010 EN :2005 EN :2007 SYSTEM IDENTIFICATION Installation and User Manual version 1.04 TLM8 2014/30/UE EN55022:2010 EN61000-6-2:2005 EN61000-6-4:2007 SYSTEM IDENTIFICATION Load Cell Systems reserves the right to change specifications without notice.

More information

Thank you for your purchase USER MANUAL

Thank you for your purchase USER MANUAL Thank you for your purchase USER MANUAL MANUAL ICONS Warning: situations involving injury risk of the user or other persons. Attention: situations, when damage of device or other equipment may be caused.

More information

Multi-Function Smart Indicator User Manual

Multi-Function Smart Indicator User Manual Multi-Function Smart Indicator User Manual EC30006 Content 1 Notice... 2 2 Specification... 2 3 Main parameter... 3 4 How to fix... 3 5 Port... 4 6 On/Off... 4 7 Charging... 4 8 Display... 5 9 Screen keypad...

More information

Pen Drive USB Datalogger!

Pen Drive USB Datalogger! SINGLE PHASE POWER METER Isolated V/I converter -RS485 Modbus - Datalogger Single-phase power meter RMS, and Voltage/Current Isolated. Signal Converter 1000 VDC / 600 VAC, 10 A AC/DC, Variable frequency

More information

USER MANUAL FOR GS100/GS1003G

USER MANUAL FOR GS100/GS1003G USER MANUAL FOR GS100/GS1003G 1 Table of Contents 1. INTRODUCTION... 3 2. FEATURES... 3 3. OPERATION... 3 4.CONNECTION DETAILS... 4 5.CONFIGURATION... 5 5.1 Hyper Terminal Setting... 5 5.2 GS100 Configuration...

More information

INSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3

INSTALLATION MANUAL. LC 200 Electronic Overload Guard. Software versione PW0501 R 0.3 INSTALLATION MANUAL LC 200 Electronic Overload Guard Software versione PW0501 R 0.3 CONTENTS MAIN FEATURES LC 200 TECHNICAL FEATURES Page 2 SYMBOLS Page 3 WARNINGS Page 3 IDENTIFICATION DATA PLATE Page

More information

Operating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO

Operating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO Order Number: 8160.UISO Status: V3; 17.09.2010c G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 1 TABLE OF CONTENTS PLEASE READ BEFORE USE... 3 DESCRIPTION... 5 UMB ISO CONVERTER ISOCON... 6 CONFIGURATION...

More information

Danfoss commercial compressors Secop compressors produced for Danfoss Bluetooth Gateway

Danfoss commercial compressors Secop compressors produced for Danfoss Bluetooth Gateway MAKING MODERN LIVING POSSIBLE Manual Danfoss commercial compressors Secop compressors produced for Danfoss Bluetooth Gateway www.danfoss.com 2 FRCC.ES.011.A1.02 CONTENTS Introduction... 4 General Description...4

More information

USER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix)

USER S MANUAL. PH232Ex1. #1 RS-232 Serial Port to Ethernet, Terminal Server/Client. Doc No: PH232Ex1-UM-001 IPEX. (IP Electronix) USER S MANUAL PH232Ex1 Doc No: PH232Ex1-UM-001 #1 RS-232 Serial Port to Ethernet, Terminal Server/Client IPEX (IP Electronix) Contents 1. INTRODUCTION... 3 2. SPECIFICATIONS... 3 3. PACKAGE CHECKLIST...

More information

Strain Gauge Converter

Strain Gauge Converter EN Z-SG General Description Module Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output.

More information

Bluetooth TO Serial CONVERTER E-P132-B

Bluetooth TO Serial CONVERTER E-P132-B Bluetooth TO Serial CONVERTER E-P132-B 1 Table of Contents Introduction..3 Package checklist...4 Product Specification...5 Product Panel Views Description...6 Product Views. 6 DC-In Power Outlet 6 Antenna

More information

Bluetooth to RS-232 Converter. RT-132B Bluetooth Adaptor Operation Manual

Bluetooth to RS-232 Converter. RT-132B Bluetooth Adaptor Operation Manual Bluetooth to RS-232 Converter RT-132B Bluetooth Adaptor Operation Manual First Edition, Nov 2007 Table of Contents 1. Introduction.. 2 2. Package checklist.. 3 3. Product Specification... 4 4. Product

More information

BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram

BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram ATEX/IECEx version (on request) PVC end-fittings for sheath (on request) PROGRAM BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram External 8-relay modules included. ON REQUEST -B -C -S -3-6

More information

isma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw

isma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw isma-b-mg-ip User Manual Global Control 5 Sp. z o.o. Poland, Warsaw www.gc5.pl Table of content 1 Introduction... 4 1.1 Revision history... 5 1.2 Safety rules... 5 1.3 Technical specifications... 6 1.4

More information

WiFi to RS-232 adapter user manual

WiFi to RS-232 adapter user manual WiFi to RS-232 adapter user manual WiFi to RS-232 adapter Package Contents: WiFi RS-232 adapter x 1 A4 User manual x 1 Mini USB Cable x 1 White Box Dimension: 11 x 6 x 5 (cm) Total Package Weight: 126

More information

User Manual Revision English

User Manual Revision English Document code: MN67118_ENG Revision 2.002 Page 1 of 12 User Manual Revision 2.002 English RS232 / RS485 - Converter (Order Code: HD67118) Suitable for Heavy supervisor for Website information: www.adfweb.com?product=hd67118

More information

Operating and Installation Manual. EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage

Operating and Installation Manual. EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage Operating and Installation Manual EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage Type EM-TRF-USV for 230 V AC mains voltage; provides uninterruptible power supply (UPS) The art of handling

More information

Real/Virtual COM. JetPort Commander

Real/Virtual COM. JetPort Commander INDUSTRIAL SERIAL DEVICE SERVER 1-port RS-232/422/485 Serial Device Server 5601 The 5601 is a RS-232/422/485 to Redundant Serial Device Server. The serial interface is configurable in software and supports

More information

VirtualSCADA VSU-485G USB to RS422/485 Isolated Converter User Manual

VirtualSCADA VSU-485G USB to RS422/485 Isolated Converter User Manual VirtualSCADA USB to RS422/485 Isolated Converter User Manual Revision 1.01.00 Page 1 (15) Table of contents Warranty and support... 3 Product return... 3 1 About the VirtualSCADA USB to RS422/485 Converter...

More information

Operating Instructions SECUTEST SI /12.10

Operating Instructions SECUTEST SI /12.10 Operating Instructions SECUTEST SI+ 3-349-613-15 1/12.10 6 5 4 3 2 1 MENU SECUTEST SI+ 7 6 8 without Function 9 10 11 12 13 14 Standard Equipment 1 Input and memory module SECUTEST SI+, 1 USB connector

More information

Serial to Ethernet Converter

Serial to Ethernet Converter Serial to Ethernet Converter User s Manual Version 1.1 2004 Infosystem Technology Corporation Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Infosystem

More information

T1-transmitter. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007

T1-transmitter. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007 T1-transmitter 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN61000-6-2 :2005 EN61000-6-4 :2007 CE- APPROVED EN45501:2015-2014/31/EU-OIML R76:2006 The Netherlands 1/62 http://www.top-sensors.com

More information

IP67 VERSION BOX (on request) 8+3 PG9 cable glands-plugs. 8+3 PVC fittings for sheath

IP67 VERSION BOX (on request) 8+3 PG9 cable glands-plugs. 8+3 PVC fittings for sheath Digital/analog weight transmitter suitable for back panel mounting on Omega/DIN rail or junction box for field mounting (on request box versions). Weighing system with 8 independent reading channels with

More information

T1-CANopen 2014/30/EU EN55022:2010 EN :2005 EN :2007

T1-CANopen 2014/30/EU EN55022:2010 EN :2005 EN :2007 T1-CANopen 2014/30/EU EN55022:2010 EN61000-6-2:2005 EN61000-6-4:2007 The Netherlands 1/55 http://www.top-sensors.com KEY TO SYMBOLS Below are the symbols used in the manual to draw the reader's attention:

More information

IDS-141A/181A. Industrial 4-port/8-port slim type serial to Ethernet device server. Features. Introduction. DS-Tool

IDS-141A/181A. Industrial 4-port/8-port slim type serial to Ethernet device server. Features. Introduction. DS-Tool 4/8 Port v1.5 / Dec, 2011 Features 4-port/8-port slim type serial to Ethernet device server Operating Modes : Virtual Com, Tunnel, TCP Server, TCP Client, UDP Multiple host devices : 5 host devices: Virtual

More information

T1-transmitter. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007

T1-transmitter. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007 T1-transmitter 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN61000-6-2 :2005 EN61000-6-4 :2007 The Netherlands 1/57 http://www.top-sensors.com KEY TO SYMBOLS Below are the symbols used

More information

1.03 TLB ETHERNET TCP/IP 2004/108/EC EN55022 EN EN SYSTEM IDENTIFICATION

1.03 TLB ETHERNET TCP/IP 2004/108/EC EN55022 EN EN SYSTEM IDENTIFICATION Microlectra bv. Hermanus Boerhaavestraat 6. 3261 ME Oud-Beijerland. Netherlands. Tel 31(0)186-616290 Fax 31(0)186-610349 www.microlectra.nl info@microlectra.nl Installation and User Manual version 1.03

More information

MXPLC. Compact PLC process station. Summary. Application HVAC control systems, data acquisition, interfacing 3 rd party systems.

MXPLC. Compact PLC process station. Summary. Application HVAC control systems, data acquisition, interfacing 3 rd party systems. MXPLC Compact PLC process station Summary The MXPLC is a programmable process station with integrated I/O module with the I/O mix optimized for larger HVAC control applications. The multi-interface process

More information

PV Remote Unit A 1378 Instruction manual Version 2.1, Code no

PV Remote Unit A 1378 Instruction manual Version 2.1, Code no PV Remote Unit A 1378 Instruction manual Version 2.1, Code no. 20 752 010 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail: metrel@metrel.si

More information

DSTHM-2 COMBINED T AND RH DUCT TRANSMITTER. Mounting and operating instructions

DSTHM-2 COMBINED T AND RH DUCT TRANSMITTER. Mounting and operating instructions Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA 4 STANDARDS 4 OPERATIONAL DIAGRAMS 5 WIRING AND

More information

F1000 User's Manual. (Version: V1.01)

F1000 User's Manual. (Version: V1.01) (Version: V1.01) Contents Chapter 1 Overview... 2 Chapter 2 Installation... 3 2.1 Installation guide... 3 2.1.1 Installation position... 3 2.1.2 NEMA4 standard installation... 3 2.1.3 Environment precautions...

More information

Features and Benefits. Certifications

Features and Benefits. Certifications NPort IA5000 Series 1 and 2-port serial device servers for industrial automation Features and Benefits Socket modes: TCP server, TCP client, UDP Patented ADDC (Automatic Data Direction Control) for 2-wire

More information

M-610 USER MANUAL PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES

M-610 USER MANUAL PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES M-610 USER MANUAL PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES TABLE OF CONTENTS INTRODUCTION. 2 POWER SUPPLY. 4 INSTRUCTION FOR REPLACING BATTERIES 5 SPECIFICATIONS..

More information

RTD-NET Installation Instructions

RTD-NET Installation Instructions LED3 SW1 LED4 RTD-NET Installation Instructions 0V +V POWER 15-24VDC English RTD-NET Installation Instructions 100.00 RTD-NET Control Interface realtime Control Systems REMC P1 P2 RS485 D-BUS DB DA GND

More information

Procon A1M. INSTALLATION MANUAL Version MITSUBISHI ELECTRIC FOR INSTALLERS

Procon A1M. INSTALLATION MANUAL Version MITSUBISHI ELECTRIC FOR INSTALLERS Procon A1M FOR INSTALLERS INSTALLATION MANUAL Version 1.1.1 For safe and correct use, please read this installation manual thoroughly before installing the PROCON A1M. MITSUBISHI ELECTRIC Preface Safety

More information

RTD-W Installation Instructions

RTD-W Installation Instructions RTD-W Installation Instructions 0V +V POWER 15-24VDC 0V S1 S2 S3 0V S4 S5 S6 English RTD-W Installation Instructions 100.00 RTD-W Control Interface realtime Control Systems 24VAC/30VDC, 1A REMC P1 P2 RS485

More information

S SENECA. Installation Manual Z-TWS4. Z-PC Line. Web Multifunction Controller Straton / Linux

S SENECA. Installation Manual Z-TWS4. Z-PC Line. Web Multifunction Controller Straton / Linux S SENECA Z-PC Line EN Installation Manual Contents: - General specifications - Technical features - Modbus and CANopen connections - Installation rules - Electrical connections - LEDs signallings - Default

More information

RXTP ROOM TEMPERATURE

RXTP ROOM TEMPERATURE ROOM TEMPERATURE CONTROLLER WITH PI CONTROL Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA 4

More information

ETHM-2. Ethernet Module. SATEL sp. z o.o. ul. Schuberta Gdańsk POLAND tel

ETHM-2. Ethernet Module. SATEL sp. z o.o. ul. Schuberta Gdańsk POLAND tel Ethernet Module ETHM-2 Firmware version 1.0 ethm2_en 09/08 SATEL sp. z o.o. ul. Schuberta 79 80-172 Gdańsk POLAND tel. + 48 58 320 94 00 info@satel.pl www.satel.pl SATEL's goal is to continually improve

More information

APP 700 Technical Specification

APP 700 Technical Specification Issued: 12/12 Supersedes: 4/12 Description The APP 700 hardware series are especially designed for waste and clean water systems, both in construction and functionality. The RTUs¹ are developed to meet

More information

Installation & User Manual

Installation & User Manual Contents Installation Instructions 3 Installation Diagrams 4 System Overview 6 Wiring Diagrams 8 Network Diagrams 9 Operation Instructions Fingerprint Enrollment 12 21 Wi-Enterprise Controller www.transmittersolutionssmart.com

More information

Power TracKer VII. User s Manual 2006 AVID. Multi Mode Reader. Manufactured under one or more of the following Patents:

Power TracKer VII. User s Manual 2006 AVID. Multi Mode Reader. Manufactured under one or more of the following Patents: Power TracKer VII User s Manual 2006 AVID Multi Mode Reader Manufactured under one or more of the following Patents: 5,235,326-5,266,926-5,559,507 6,172,609 FCC ID: IOL-134-AV1028 The device complies with

More information

Vgraph Hardware manual ver Code 114VGRAHWE01. Vgraph CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY ENGLISH. HARDWARE MANUAL ver. 1.

Vgraph Hardware manual ver Code 114VGRAHWE01. Vgraph CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY ENGLISH. HARDWARE MANUAL ver. 1. Vgraph CANBUS USER INTERFACE WITH LCD GRAPHIC DISPLAY ENGLISH HARDWARE MANUAL ver. 1.01 CODE 114VGRAHWE01 page 1 of 22 Important Important Read these instructions carefully before installing and using

More information

Technical Specification & Warranty mypos Europe Ltd. mypos Mini EN

Technical Specification & Warranty mypos Europe Ltd. mypos Mini EN Technical Specification & Warranty mypos Europe Ltd. mypos Mini EN CONTENTS Supported connections... 2 Certifications & EMV... 3 mypos Mini specification... 4 Safety instructions... 5 General safety information...

More information

LC-ON THE GO TM Wireless WiFi Adapter P/N 81538

LC-ON THE GO TM Wireless WiFi Adapter P/N 81538 LC-ON THE GO TM Wireless WiFi Adapter P/N 81538 Set-up and Connection Guide L I Q UID C O N T R O L S An IDEX Energy & Fuels Business LC_IOM_ONTHEGOWIFIADAPTER V1: 05/17 PUBLICATION UPDATES AND TRANSLATIONS

More information

WiFi to RS-232 adapter user manual

WiFi to RS-232 adapter user manual User Manual V1.2 Date: 2015.01.28 WiFi to RS-232 adapter user manual Package Contents: WiFi RS-232 adapter x 1 WiFi to RS-232 adapter 2 dbi dipole antenna x 1 A4 User manual x 1 USB Cable x 1 Power cable

More information

DMW. Digital Weighing Meter. Model Number Legend SALIENT FEATURES. Sensing

DMW. Digital Weighing Meter. Model Number Legend SALIENT FEATURES. Sensing Digital Meter Model Number Legend 1 2 3 1. Series 2. Output Type N: Indication Only R: 2 Relay Output M: 2 Relay Output + RS485 Modbus SALIENT FEATURES External Tare 96 x 48 Housing Dual Alarm Outputs

More information

Druck DPI 620 advanced modular calibrator

Druck DPI 620 advanced modular calibrator GE Sensing & Inspection Technologies A1.1 DPI 620: Channel 1 (CH1) Druck DPI 620 advanced modular calibrator safety and quick reference guide - K0454 Measure (M) / Source (S) / Power (P) a ±30 V (M) b

More information

Industrial Serial Device Server

Industrial Serial Device Server 1. Quick Start Guide This quick start guide describes how to install and use the Industrial Serial Device Server. Capable of operating at temperature extremes of -10 C to +60 C, this is the Serial Device

More information

Installation & User Manual V2.08

Installation & User Manual V2.08 YOUR SECURITY IS OUR PRIORITY Other products from GSD Contents Installation Instructions Installation Diagrams System Overview Wiring Diagrams Network Diagrams Operation Instructions Fingerprint Enrollment

More information

DXTH DUCT SENSOR / SWITCH FOR TEMPERATURE AND HUMIDITY. Mounting and operating instructions

DXTH DUCT SENSOR / SWITCH FOR TEMPERATURE AND HUMIDITY. Mounting and operating instructions DUAL DUCT SENSOR / SWITCH FOR TEMPERATURE AND HUMIDITY Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL

More information

CHAPTER 1. Introduction Introduction 3

CHAPTER 1. Introduction Introduction 3 Technical & User Manual Weight Indicator: SMIT-3015 Manufactured By: Samyak Instrumentation Pvt.Ltd. F-4, Memnagar Complex, Opp.Petrol Pump, Memnagar Village, Ahmedabad, India-380052. Phone: +91-79-27495500/5600,

More information

Bluetooth to RS-232&RS422/485. EX-9132B/BI Bluetooth Adapter Operation Manual

Bluetooth to RS-232&RS422/485. EX-9132B/BI Bluetooth Adapter Operation Manual Bluetooth to RS-232&RS422/485 EX-9132B/BI Bluetooth Adapter Operation Manual First Edition, Jun 2008 Table of Contents 1. Introduction 2 2. Package checklist 3 3. Product Specification 4 4. Product Panel

More information

Adam Equipment ADAM THERMAL PRINTER. (P.N Revision A1, June 2011)

Adam Equipment ADAM THERMAL PRINTER. (P.N Revision A1, June 2011) Adam Equipment ADAM THERMAL PRINTER (P.N. 3126611270 Revision A1, June 2011) 1 Adam Equipment Company 2011 Easy Reference: Serial number of the printer: Model of the product linked to this printer: Software

More information

DMT345 and DMT346 Dewpoint Transmitters

DMT345 and DMT346 Dewpoint Transmitters DMT345 and DMT346 Dewpoint Transmitters for High Temperature Applications Features DMT345 measures humidity at temperatures up to 180 C (356 F) DMT346 measures humidity at temperatures up to 350 C (+662

More information

RS485 MODBUS Module 6RO

RS485 MODBUS Module 6RO Version 2.0 12/02/2013 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained in this manual have

More information

MMT330 Series Moisture and Temperature Transmitters for Oil

MMT330 Series Moisture and Temperature Transmitters for Oil MMT330 Series Moisture and Temperature Transmitters for Oil Features Continuous online measurement of moisture in oil Ball-valve installation no need to shut down the process or drain the oil Proven Vaisala

More information

TLS. Installation and User Manual version mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2004/108/EC EN55022 EN EN

TLS. Installation and User Manual version mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2004/108/EC EN55022 EN EN ENGLISH ENGLISH ENGLISH ENGLISH Installation and User Manual version 1.11 TLS 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2004/108/EC EN55022 EN61000-6-2 EN61000-6-4 SYSTEM IDENTIFICATION KEY TO SYMBOLS Below

More information

Size: 84 x 118.4mm * 100P

Size: 84 x 118.4mm * 100P Size: 84 x 118.4mm * 100P *, ( ), ( ) *, According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed

More information

Digital Sound Level Meter with USB Model:

Digital Sound Level Meter with USB Model: Digital Sound Level Meter with USB Model: 72-947 1 IMPORTANT SAFETY INFORMATION Please read these instructions carefully before use and retain for future reference. Please operate according to this manual,

More information

Operating Guide MODBUS (RTU) Communications Option IM/L150 MOD_2. Level Indicator L150 and L160

Operating Guide MODBUS (RTU) Communications Option IM/L150 MOD_2. Level Indicator L150 and L160 Operating Guide MODBUS (RTU) Communications Option IM/L150 MOD_2 Level Indicator L150 and L160 Electrical Safety This equipment complies with the requirements of CEI/IEC 61010-1:2001-2 "Safety requirements

More information

INSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE

INSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE INSPECTION TOOL Inspection Video Camera with Color LCD Monitor Model: 8802LE,8803LE EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle

More information

RS-232 and IP Router. Vanco Part Number: RS232-IP. Technical Support

RS-232 and IP Router. Vanco Part Number: RS232-IP. Technical Support RS-232 and IP Router Vanco Part Number: RS232-IP Technical Support www.vanco1.com techsupport@vanco1.com 800-626-6445 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety,

More information

Instruction Manual. T3110 T3110L T3110Ex

Instruction Manual. T3110 T3110L T3110Ex www.cometsystem.cz Instruction Manual T3110 T3110L T3110Ex Programmable transmitter of temperature, relative humidity and other calculated humidity values with 4-20 ma outputs Copyright: COMET System,

More information

TLB4 TLM8. ERDE-Elektronik AB - Spikgatan Vellinge TLM8den.

TLB4 TLM8. ERDE-Elektronik AB - Spikgatan Vellinge TLM8den. Digital/analog weight transmitter suitable for back panel mounting on Omega/DIN rail or junction box for eld mounting (on request box versions). Weighing system with 8 independent reading channels with

More information

SDM-6RO. Expansion Module 6 relay outputs. Manufactured for

SDM-6RO. Expansion Module 6 relay outputs. Manufactured for Version 1.0 5.02.2014 Manufactured for Thank you for choosing our product. This manual will help you with proper support and proper operation of the device. The information contained in this manual have

More information

APC100. User Manual.

APC100. User Manual. APC100 User Manual www.audac.eu 2 Index Introduction 5 Precautions 6 Safety requirements 6 Caution servicing 7 EC Declaration of Conformity 7 Waste of Electrical and Electronic Equipment (WEEE) 8 Chapter

More information

Bluetooth RS232 Serial Adapter

Bluetooth RS232 Serial Adapter Bluetooth RS232 Serial Adapter LM058 Table of contents 1. Introduction Page 1 2. Features Page 1 3. Packaging Page 2 4. General Specification Page 2 5. RS232 Interface Page 3 5.1 Pin Out Page 3 5.2 Signals

More information

T1-Profinet-IO. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007

T1-Profinet-IO. 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN :2005 EN :2007 T1-Profinet-IO 4-20mA 0-20mA 0-10V 0-5V +/-5V +/-10V 2014/30/EU EN55022:2010 EN61000-6-2 :2005 EN61000-6-4 :2007 The Netherlands 1/59 http://www.top-sensors.com KEY TO SYMBOLS Below are the symbols used

More information

Dual channel temperature logger with two voltage inputs 0-5V Instruction Manual

Dual channel temperature logger with two voltage inputs 0-5V Instruction Manual LOGGER S0541 Dual channel temperature logger with two voltage inputs 0-5V Instruction Manual Instruction Manual for use of S0541 logger Instrument is designed for measurement and record of temperature

More information

HDMI Extender over Ethernet, with RS232, POE

HDMI Extender over Ethernet, with RS232, POE WARRANTY If your product does not work properly because of a defect in materials or workmanship, our Company (referred to as "the warrantor" ) will, for the length of the period indicated as below, (Parts(2)Year,

More information

UNIVERSAL CURRENT CONVERTER

UNIVERSAL CURRENT CONVERTER UNIVERSAL CURRENT / VOLTAGE CONVERTER AC/DC Current / Voltage Analyzer The is the first CURRENT / VOLTAGE CONVERTER & ANALYZER ALL IN ONE - of the market. It allow you to connect all isolated current sensors.

More information

Technical Specification & Warranty mypos Europe Ltd. mypos Mini Ice EN

Technical Specification & Warranty mypos Europe Ltd. mypos Mini Ice EN Technical Specification & Warranty mypos Europe Ltd. mypos Mini Ice EN CONTENTS Supported connections... 2 Certifications & EMV... 2 D220 specification... 3 Safety instructions... 5 General safety information...

More information

User Manual A08. User Manual

User Manual A08. User Manual A08 TABLE OF CONTENTS TABLE OF CONTENTS... 1 1. INTRODUCTION... 2 1.1. Key Features... 3 1.2. OS Requirement... 4 1.3. Specification... 4 1.4. Packing List... 4 2. OVERVIEW... 5 2.1. LED Definition...

More information

Quick Start. Appearance and pin assignments

Quick Start. Appearance and pin assignments Quick Start WF-2055 Package Checklist The package includes the following items: One WF-2055 module One Quick Start One software utility CD One screw driver One RS-232 cable (CA-0910) One Antenna 2.4GHz

More information

converter Tel: Fax:

converter Tel: Fax: USB4485 485 USB to 4 ports RS485/422 converter User manual Shenzhen 3onedata Technology Co.,Ltd Tel: +86-755-26702688 Fax: +86-755-26703485 www.3onedata.com Contents 1. Introduction...3 2. Packing List...

More information

BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram

BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram PROGRAM BASE LOAD UNLOAD 3 PRODUCTS 6 PRODUCTS 14 PRODUCTS Multiprogram External 8-relay modules included W200 W200-C W200-S W200-3 W200-6 W200-14 ON REQUEST W200-MU CERTIFICATIONS OIML R76:2006, class

More information

Product Manual. USB BAY-4 Port Serial DB- 9 RS-232 Adapter with FTDI Chipset. Coolgear, Inc. Version 1.1 September 2017 Model Number: USBG-BAY4

Product Manual. USB BAY-4 Port Serial DB- 9 RS-232 Adapter with FTDI Chipset. Coolgear, Inc. Version 1.1 September 2017 Model Number: USBG-BAY4 USB BAY-4 Port Serial DB- 9 RS-232 Adapter with FTDI Chipset Product Manual Coolgear, Inc. Version 1.1 September 2017 Model Number: USBG-BAY4 2 USBG-BAY4 Product Manual Revision History Revision Date Author

More information

WI-I/O 9 Multi I/O Units

WI-I/O 9 Multi I/O Units WI-I/O 9 Multi I/O Units A transceiver is a wireless device made up of a transmitter and receiver. Since each module can manage both input and output signals, it can be used to monitor transducers and

More information

TVAC25100 TVAC25110 User manual

TVAC25100 TVAC25110 User manual TVAC25100 TVAC25110 User manual Version 11/2010 Original user manual. Keep for future use. 12 Introduction Dear Customer, Thank you for purchasing this product. This product meets the requirements of the

More information

dedicated KVM switch and rackmount screen technology User Manual CV-801 PS/2 DB-15 KVM Designed and manufactured by Austin Hughes

dedicated KVM switch and rackmount screen technology User Manual CV-801 PS/2 DB-15 KVM Designed and manufactured by Austin Hughes dedicated KVM switch and rackmount screen technology User Manual PS/2 DB-15 KVM Designed and manufactured by Austin Hughes 751 Legal Information First English printing, October 2002 Information in this

More information

EM4594 Mini Wifi Repeater with WPS

EM4594 Mini Wifi Repeater with WPS EM4594 Mini Wifi Repeater with WPS EM4594 Mini Wifi Repeater with WPS 2 ENGLISH Table of contents 1.0 Introduction... 2 1.1 Packing contents... 2 1.2 Device Overview... 3 2.0 Where to place the EM4594

More information

User Manual version 1.4 PROG DB. DATA STORAGE PROGRAM for W SERIES weight indicators (Options: OPZWUSB_ ; OPZWDATIPC)

User Manual version 1.4 PROG DB. DATA STORAGE PROGRAM for W SERIES weight indicators (Options: OPZWUSB_ ; OPZWDATIPC) User Manual version 1.4 PROG DB DATA STORAGE PROGRAM for W SERIES weight indicators (Options: OPZWUSB_ ; OPZWDATIPC) Load Cell Central follows a policy of continuous improvement and reserves the right

More information

SURGE PROTECTION DEVICE RECOMMENDED

SURGE PROTECTION DEVICE RECOMMENDED 4x4 HDMI2.0 Matrix Support 4K@60hz YUV4:4:4, 18Gbps, HDR Operating Instruction 1 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before

More information

Embedded Modbus TCP Module GS11-MT. User Manual REV 1.1. SST Automation.

Embedded Modbus TCP Module GS11-MT. User Manual REV 1.1. SST Automation. Embedded Modbus TCP Module GS11-MT User Manual REV 1.1 SST Automation E-mail: SUPPORT@SSTCOMM.COM WWW.SSTCOMM.COM Catalog 1 About the Embedded Module... 4 1.1 General...4 1.2 Features... 4 1.3 Specifications...4

More information

The LT1300 wall mount load cell indicator is a precision digital indicator for load cell and strain gauge applications.

The LT1300 wall mount load cell indicator is a precision digital indicator for load cell and strain gauge applications. LT1300 Wall Mount Load Cell Indicator Datasheet English 1.00 Introduction The LT1300 wall mount load cell indicator is a precision digital indicator for load cell and strain gauge applications. The high

More information

Interface WI-FI CODE: INTW. v.1.0. Edition: 2 from Supersedes the: 1 from edition

Interface WI-FI CODE: INTW. v.1.0. Edition: 2 from Supersedes the: 1 from edition Interface WI-FI v.1.0 CODE: EN Edition: 2 from 19.12.2012 Supersedes the: 1 from 07.09.2012 edition CONTENTS 1. General description....3 2. Arrangement of the components....3 3. Installation...4 4. Configuration

More information

Serial Communications Accessories SITRANS RD200/300. Operating Instructions 05/2013 SITRANS

Serial Communications Accessories SITRANS RD200/300. Operating Instructions 05/2013 SITRANS Serial Communications Accessories SITRANS RD200/300 Operating Instructions 05/2013 SITRANS Siemens Auto SIT SITRANS RD300RANS RD300 Safety Guidelines: Warning notices must be observed to ensure personal

More information

P USB 2.0 (Type B) Port - Programming - Online monitoring

P USB 2.0 (Type B) Port - Programming - Online monitoring P3-0 CPU Module Company Information Systems Overview P3-0 The P3-0 is a full-featured, highperformance CPU. Features include a line x 10 character LCD and seven communications ports which support

More information

7. Cleaning and maintenance Disposal What if there are problems? Technical data... 21

7. Cleaning and maintenance Disposal What if there are problems? Technical data... 21 WL 32 D Lichtwecker Gebrauchsanweisung...2 12 G Wake up light Instructions for use... 13 22 F Réveil lumineux Mode d emploi... 23 33 E Luz para despertar Manual de instrucciones... 34 43 I Luce sveglia

More information

INSPECTION CAMERA MODEL NO: CIC2410 OPERATION & SAFETY INSTRUCTIONS PART NO: GC0116

INSPECTION CAMERA MODEL NO: CIC2410 OPERATION & SAFETY INSTRUCTIONS PART NO: GC0116 INSPECTION CAMERA MODEL NO: CIC2410 PART NO: 6470385 OPERATION & SAFETY INSTRUCTIONS GC0116 INTRODUCTION Thank you for purchasing this CLARKE Inspection Camera. Before attempting to use this product, please

More information

Before Installing a PC software upgrade use Control Panel/Programs/Uninstall to uninstall the existing MULTiLOG2 software.

Before Installing a PC software upgrade use Control Panel/Programs/Uninstall to uninstall the existing MULTiLOG2 software. Contents PC Software upgrade available here: (latest version is 2.19.153 dated 29-sep-2015)... 1 IMPORTANT Firmware revisions... 1 MULTiLOG2 battery specification... 2 Updated Windows drivers for the USB

More information

MGate 5105-MB-EIP Quick Installation Guide

MGate 5105-MB-EIP Quick Installation Guide MGate 5105-MB-EIP Quick Installation Guide Edition 2.2, March 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778

More information

Bluetooth RS-232 Dongle. User s Manual BTS-100

Bluetooth RS-232 Dongle. User s Manual BTS-100 Bluetooth RS-232 Dongle User s Manual BTS-100 Table of Contents 1. INTRODUCTION... 2 2. PHYSICAL DIAGRAM... 3 3. BLUETOOTH PAIRING AND CONNECTING... 4 4. RS-232 INSTALLATION... 10 5. HYPERTERMINAL SETTING

More information

INSPECTION TOOL. Wireless Inspection Camera with Recordable Monitor. EU Environmental Protection. Model: 8802AL, 8803AL. Model: 8802AL, 8803AL

INSPECTION TOOL. Wireless Inspection Camera with Recordable Monitor. EU Environmental Protection. Model: 8802AL, 8803AL. Model: 8802AL, 8803AL TM TM INSPECTION TOOL Wireless Inspection Camera with Recordable Monitor Model: 8802AL, 8803AL EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please

More information

Document Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter

Document Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter Document Name: User Manual for SC10MK, Modbus RTU to Modbus TCP Converter Login for the first time, please use http://192.168.1.100 To key in user name and password is for identifying authorization. Default

More information

UWE-1707 SERIES CONTENTS OPERATION MANUAL ELECTRONIC WEIGHING INDICATOR 1. SPECIFICATIONS 2. INSTALLATION

UWE-1707 SERIES CONTENTS OPERATION MANUAL ELECTRONIC WEIGHING INDICATOR 1. SPECIFICATIONS 2. INSTALLATION UWE-1707 SERIES CONTENTS ELECTRONIC WEIGHING INDICATOR OPERATION MANUAL 1. SPECIFICATIONS PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE ATTEMPT TO OPERATE THE SCALE 2. INSTALLATION 3. ROUTINE OPERATION

More information

HD 2013 HD 2013-D AA-26 AA-27

HD 2013 HD 2013-D AA-26 AA-27 AA-26 HD 2013 HD 2013-D HD2013 TIPPING BUCKET RAIN GAUGE HD2013-D DATALOGGER TO MEASURE RAINFALL HD2013 BUCKET RAIN GAUGE Introduction The HD2013 is a reliable and sturdy bucket rain gauge, built entirely

More information