Wireless. Wireless. Datasheet. Wireless Wall Touch Panel

Transcription

1 Wireless Wireless Wall Touch Panel Datasheet Wireless Wireless Wall Touch Panel This product is wall installation, wireless control panel equipment, with six touch buttons. Three of them are used for single/multi-group terminal equipment, and the other two are used for adjusting the equipment status (opening / closing the curtains, dim up/dim down the lighting brightness), and support ON/OFF control, dimming control and scene control. This device can communicate with gateway, smart light, dimmer and smart socket and other ZIGBEE smart terminal devices. Benefits Features Application 6 touch buttons Wireless access, meet physical Office Aluminum alloy frame, ultra-thin design One-click control to achieve the required scenario Direct control of zigbee-related equipment, such as lighting, curtains, etc standards Follow ZIGBEE ZHA protocol Hotel Support 3 sets of luminaires ON/OFF and Home LEVEL control Equipment control for lighting dimming, curtain opening and closing or ON and OFF functions Scene control by ZIGBEE Classroom

2 Ordering Information Commercial product name 12NC Carton Quantity Wireless Wall Touch Panel pcs Product Data All specifications are typical and at 25 C Tcase unless otherwise specified. Dimensions and weight Material ABS + PC ( V0 AC3100 ), Glass aluminum Color Ivory Dimensions L x W x H 86 x 86 x 9.1 mm Tolerance +/- 0.1mm Weight 56 gram Electrical data Input voltage 5 Vdc Input current 20 ma Key input Capacitor touch Number of buttons 6 pcs ESD conductive air EMC & SAFETY Specification item SAFETY EMC ESD Value GB , GB GB GB/T , GB/T GB/T , GB (CISPR ) GB/T IEC RF data RF Frequency GHz Channel 16 pcs Modulation QPSK DSSS Transmit Power 8 10 dbm V, +25ºC Typical value 8.5 Receiving Sensitivity dbm Nominal for 1% PER Typical value -94 Maximum receiver input power +10 dbm For 1% PER measured as sensitivity; supply current at 14.7 ma Physical Protocol Security 128 bit AES Operational temperatures and humidity Ambient temperature ºC Relative humidity % 2-5 Datasheet - Wireless Wall Touch Panel

3 Storage temperature and humidity Ambient temperature ºC Relative humidity % Lifetime Lifetime Hours Measured temperature at Tcase-point is Tcase-life. Maximum failures=10% Certificates and standards Specification item Value Approval marks CE RoHS RoHS REACH REACH ZIGBEE ZIGBEE Audible noise < 20 Ingress Protection classification IP20 Wireless Wall Touch Panel Dimensions (mm) A1 B1 C1 Data Sheet Item Dimensions (mm) A1 86 B1 86 C1 5.5 C2 7.3 D1 40 E1 32 F1 21 C2 E1 F1 D1 3-5 Datasheet - Wireless Wall Touch Panel

4 Wiring & Connections 1. Put the power supply of accessories into 86 boxes and connect the 220V mains wire with the wire L and N of the accessories;(where input: brown L, blue N;Output: 2 pin jack, red L, black N;Note: please disconnect the 220V power supply when wiring. 2. Fix the base of product to the 86 base of wall with screws; 3. Connect the output of the accessory power supply and the power input of the multi-function touch panel as shown below; 4. Gently press touch switch which is on the wall to the base. Function description 1. Mains input 2. Toggle switch 3. Socket for factory Function description 1. button for group 2. Switch of on/off 3. Button for dimming 4-5 Datasheet - Wireless Wall Touch Panel

5 2019 Signify Holding, IBRS 10461, 5600VB, NL. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners. products/connected-lighting 01/2019 Data subject to change