TMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency

Transcription

1 TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal block for chassis mount - Solder pins for direct PCB mount - Optional pin-connector on request DIN-rail mount adaptor (optional) Universal input VAC, Hz Protection class ll IEC/EN/UL approval, CB-report Over-temperature protection Protection against short circuit and oveload 3-year product warranty The TMP & TMPM series AC/DC Power Modules is a new range of fully encapsulated power supplies in an ultra-compact casing. They feature easy chassis mounting with screw terminal block connection or direct PCB mounting with solder pins. Full compliance with International safety standards for industrial control equipment qualifies the products for worldwide markets. These power supplies offer a cost effective solution for many space critical applications in commercial and industrial electronic equipment and for polluted and dusty environment. CB Scheme UL UL 508 Single Output Models 4 to 0 Watt Small footprint Low profile Order code Output power max. Output Efficiency PCB-mount with solder pins typ. TMPM VDC / 00 ma 70 % TMPM 0405 VDC / 800 ma 7 % TMPM VDC / 444 ma 75 % TMPM 04 4 W VDC / 333 ma 76 % TMPM VDC / 67 ma 76 % TMPM VDC / 67 ma 77 % TMP W 3.3 VDC / 400 ma 70 % TMP 0705 VDC / 400 ma 73 % TMP 07 7 W VDC / 583 ma 78 % TMP VDC / 466 ma 78 % TMP VDC / 9 ma 78 % TMPM W 3.3 VDC / 500 ma 70 % TMPM 005 VDC / 000 ma 7 % TMPM 0 0 W VDC / 833 ma 76 % TMPM 05 5 VDC / 667 ma 75 % TMPM 04 4 VDC / 47 ma 7 % TMP W 3.3 VDC / 000 ma 70 % TMP 005 VDC / 000 ma 73 % TMP 0 0 W VDC / 833 ma 76 % TMP 05 5 VDC / 666 ma 76 % TMP 04 4 VDC / 46 ma 76 % 5 to 60 Watt and multi output models see next page --> Page of 9

2 Single Output Models 5 to 60 Watt PCB-mount with solder pins Order code Output power max. Output Efficiency Chassis mount, screw terminal TMP 505 TMP 505C 5 VDC / 3000 ma 75 % TMP 5 TMP 5C VDC / 50 ma 79 % TMP 55 TMP 55C 5 W 5 VDC / 000 ma 79 % TMP 54 TMP 54C 4 VDC / 65 ma 79 % TMP 548 TMP 548C 48 VDC / 30 ma 79 % TMP 3005 TMP 3005C 5 VDC / 6000 ma 78 % TMP 30 TMP 30C VDC / 500 ma 80 % TMP 305 TMP 305C 30 W 5 VDC / 000 ma 80 % TMP 304 TMP 304C 4 VDC / 50 ma 80 % TMP 3048 TMP 3048C 48 VDC / 65 ma 80 % TMP 6005 TMP 6005C 5 W 5. VDC / ma 79 % TMP 60 TMP 60C VDC / 5000 ma 8 % TMP 605 TMP 605C 5 VDC / 4000 ma 83 % TMP 604 TMP 604C 60 W 4 VDC / 500 ma 84 % TMP 6036 TMP 6036C 36 VDC / 665 ma 84 % TMP 6048 TMP 6048C 48 VDC / 50 ma 84 % Multi Output Models 4 to 30 Watt Order code Output Output Output Output 3 Eff. PCB-mount Chassis mount power typ. Models with common ground TMPM 04 + VDC / 66 ma VDC / 66 ma 77 % TMPM W +5 VDC / 33 ma 5 VDC / 33 ma 77 % TMPM VDC / 600 ma +3.3 VDC / 50 ma 7 % TMPM VDC / 50 ma + VDC / 0 ma 75 % TMP 0 0 W + VDC / 380 ma VDC / 380 ma 77 % TMP VDC / 300 ma 5 VDC / 300 ma 77 % TMP 5 TMP 5C 5 W + VDC / 650 ma VDC / 650 ma 79 % TMP 55 TMP 55C +5 VDC / 500 ma 5 VDC / 500 ma 79 % TMP 30 TMP 30C 30 W + VDC / 300 ma VDC / 300 ma 80 % TMP 305 TMP 305C +5 VDC / 000 ma 5 VDC / 000 ma 80 % TMP 55 TMP 55C VDC / 500 ma VDC / 65 ma 7 % TMP 55 TMP 55C 5 W VDC / 000 ma + VDC / 00 ma VDC / 00 ma 74 % TMP 555 TMP 555C VDC / 000 ma +5 VDC / 50 ma 5 VDC / 50 ma 74 % Models with output isolated from output /3 (floating) TMP 305 TMP 305C VDC / 3000 ma ) VDC /50 ma ) 76 % TMP 305 TMP 305C VDC / 3000 ma ) + VDC / 600 ma ) VDC / 600 ma ) 76 % TMP 3055 TMP 3055C 30 W VDC / 3000 ma ) +5 VDC / 500 ma ) 5 VDC / 500 ma ) 76 % TMP 305 TMP 305C VDC / 3000 ma ) + VDC / 000 ma ) VDC / 50 ma 3) 76 % TMP 3036 TMP 3036C 3.3 VDC / 4000 ma ) + VDC / 500 ma ) + VDC / 50 ma 3) 7 % TMP 3037 TMP 3037C VDC / 4500 ma ) +3.3 VDC / 000 ma ) + VDC / 50 ma 3) 7 % Peak current, total power not to exceede 30 Watt: ) 33 % ) 50 % 3) 00 % typ. Page of 9

3 Input Specifications Input voltage nominal VAC AC range (universal input) VAC DC range VDC Input frequency nominal 50 / 60 Hz range 4 30 W models: Hz 60 W models: Hz Input current at full load 5 VAC / 30 VAC input 4 W models: 80 ma / 55 ma typ. 7 W models: 50 ma / 00 ma typ. 0 W models: 00 ma / 30 ma typ. 5 W models: 300 ma / 90 ma typ. 30 W models: 550 ma / 330 ma typ. 60 W models: 050 ma / 670 ma typ. External input fuse required (recommended value) Output Specifications Voltage set accuracy Max. capacitive load [µf] Single output models: Dual output models: Triple output models: 4 W models:.0 A slow blow 7 5 W models:.0 A slow blow 30 W models: 3.5 A slow blow 60 W models: 6.3 A slow blow ± % max. Regulation Input variation Output % max. Input variation Output /3 3 % max. Load variation TMPM 0403 model (0 00%):.5 % max. single and floating outputs (0 00%): % max. (0 00% for TMPM 04 models) common ground outputs balanced load (0 00%):.5 % max. common ground outputs unbalanced load (0/90%): % max. Minimum load Ripple and noise (0MHz bandwidth) Overload protection by current limit Overvoltage protection by Zehner diode (main output only) Start-up time Hold-up time TMPM 04 single and sym.dual models: not required TMPM 04 asym. dual models: 5% per output single and dual output models: 0 % of rated max. current triple output models main output: 0 % of rated max. current triple output models auxiliary outputs: 0 % of rated max. current operation at lower load condition will not damage these power supplies, how ever, they may not meet all listed specifications. 3.3 VDC & VDC outputs:.8 % of Vout [mvp-p] other outputs:.0 % of Vout [mvp-p] 05 % min. of Inom, fold back, automatic recovery (long term overload condition may cause damage to the power supply) 0 % of Vout typ. 400 ms typ. 0 ms typ. Model series Output: TMPM 04 TMP 07 TMPM 0 TMP 0 TMP 5 TMP 30 TMP VDC / 5. VDC VDC / 5 VDC VDC VDC VDC / VDC / / +5 / 5 VDC / VDC / / +5 / 5 VDC All specifications valid at nominal input voltage, full load and +5 C after warm-up time unless otherwise stated. Page 3 of 9

4 General Specifications AC/DC Power Modules Temperature ranges Operating TMPM 04 models: 5 C to +60 C (no derating) TMP 0 models: 5 C to +50 C (no derating) other models: 5 C to +70 C (with derating) Storage (non-operating) 40 C to +85 C Power derating Over temperature protection Temperature coefficient Humidity (non-condensing) Switching frequency 3.3 %/K above +50 C to +65 C %/K above +65 C to +70 C (no derating aproved for TMPM04 and TMP0 models) at 90 C (automatic recovery at 67 C) 0.0 %/K 95 % rel. H max. 00 khz typ. fixed Isolation voltage (60 sec.) Input/Output VAC Isolation resistance Input/Output 00 MOhm (at 500 VDC) Altitude during operation TMP 0, TMPM 04 & 0, : 000 m max. (6 560 ft) approved other models: m max. (9 840 ft) approved Electromagnetic compatibility (EMC), Emissions EN : 007 EN 604-3: 000, class A EN 550, EN 5503, FCC part 5: class B Electromagnetic compatibility (EMC), Immunity EN : 005 EN 604-3: 000, class A Electrostatic discharge ESD EN kv / 4 kv, criteria B RF field susceptibility EN V/m, criteria A Electrical fast transient / burst immunity input EN ± kv, criteria B Electrical fast transient / burst immunity output EN ± kv, criteria B Surge immunity line neutral EN , ± kv, criteria B Surge immunity output EN ±0.5 kv, criteria B Immunity to conducted RF disturbances EN V, criteria B Mains voltage dips and interruptions EN % 0 ms, criteria B 60 % 00 ms, criteria C 95 % 5000 ms, criteria C EMC test certificates Protection class II to IEC/EN Safety standards Information technology equipment IEC/EN , UL Industrial control equipment UL/cUL 508 (chassis mount single and symetric dual output models only) Safety approvals CB certificate for IEC TMPM 04 models: TMP 07 models: TMP 0 models: TMPM 0 models: TMP 5 models: TMP 30 single output models: TMP 30 dual / triple output models: TMP 60 models: UL approvals for UL > certifications -> File: e8893 UL approval for UL 508 (chassis mount models only) -> certifications -> File: e309 Reliability /calculated MTBF (MIL-HDBK-7F, at +5 C, ground benign) Casing material TMP 07, TMPM 04 & 0 models: > h TMP 0 models: > h TMP 5 models: > h TMP 30 models: > h TMP 60 models: >5 000 h plastic resin + fiberglass (UL 94V-0 rated) Environmental compliance Reach RoHS RoHS directive 0/65/EU All specifications valid at nominal input voltage, full load and +5 C after warm-up time unless otherwise stated. Page 4 of 9

5 Outline Dimensions TMPM 04 models: 5.5 (0.99) 7.50 (0.30) x3.75 (x0.5) 4.00 (0.55) 7.50 (0.30) 36.5 (.44) Pin Single Dual ntc ntc 3 +Vout Vout 3.00 (0.).00 (0.83) 7.0 (.06) 3.75 (0.5) 7. (0.67) 4.0 (0.6) 4 Vout com./ 5 no pin Vout Pin diameter: 0.5 (0.0) Weight: 6 g (0.9 oz) 6 AC (N) 7 AC (L) TMP 07 models: 5.4 (.00) 0.6 (0.40).54 (0.0) 9.5 (0.77) 4 3 Pin Single (.80) 45.7 (.00) AC (N) 3 +Vout 4 Vout 0.3 (0.80).54 (0.0) Pin diameter:.0 (0.04) Weight: 44 g (.55 oz) TMPM 0 models: 7. (.07) 0.6 (0.40) 3.45 (0.4) 3.5 (0.93) 4 3 Pin Single AC (N) 45.7 (.80) (.06) Vout 4 Vout 0.3 (0.80) 3.35 (0.3) 0.7 (0.03) 0.0 (0.39) Pin diameter:.0 (0.04) Weight: 54 g (.90 oz) TMP 0 models: 4 (.77) (0.40) (0.40) 9. (0.76) Pin Single Dual AC (N) AC (N) AC (L) 3 Vout Vout (.3) (0.6) (.5) (0.70).5 (0.89) 4 ntc com./ 5 +Vout Vout Pin diameter:.0 (0.04) Weight: 9 g (3.5 oz) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.0) Pin pich tolerance: ±0.5 (±0.0) Page 5 of 9

6 Outline Dimensions TMP 5 models for PCB mount: (0.35) (.3).43 (0.45).43 (0.45) (0.35) (0.77) Pin-Out Pin Single Dual sym. Dual asym. AC (N) Triple 9.9 (0.78) 9.9 (0.78) x M4 THD 40.0 (.57) (.44) 6.0 (.9) no pin Vout 3 4 Vout Vout Vout com./3 5 no pin com./ +Vout Vout 6 +Vout Vout Vout Vout 7 no pin +Vout +Vout (0.80) 7.0 (.06) Max Screw penetration: 5.5 (0.) Pin diameter:.0 (0.04) Weight: 35 g (4.76 oz) TMP 5 models for chassis mount: 54.0 (.3) 46.0 (.8) 4.0 (0.6) ( (0.9).8 (0.46) Connection Pin Single Dual Dual sym. asym. Triple x ø3.5 AC (N) 3 ntc Vout 3 4 Vout Vout Vout com./3 Top view (3.39) 86.0 (3.78) (.99) 5 ntc com./ +Vout Vout 6 +Vout Vout Vout Vout 7 ntc +Vout +Vout 0.0 (0.39) Weight: 3 g (4.66 oz) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.0) Pin pich tolerance: ±0.5 (±0.0) Mounting hole tolerance: ±0.5 (±0.0) Page 6 of 9

7 Outline Dimensions TMP 30 models for PCB mount: 63.5 (.50) 5.4 (0.60).70 (0.50).70 (0.50) 5.4 (0.60).7 (0.85) / Connection Pin Single Dual sym. Dual asym. Triple AC (N) x M4 THD 7.5 (.08) (3.0) 8.3 (3.50) Vout Vout +Vout Vout 4 no pin / ntc +Vout +Vout 5 Vout com./ Vout com / (.09) 6 no pin / ntc Vout Vout 7 ntc Vout ntc Vout (0.5) 7.94 (.0) 7.94 (.0) 3.75 (.5) Max Screw penetration: 5.5 (0.) Pin diameter:.0 (0.04) Weight: g (7.44 oz) TMP 30 models for chassis mount: 63.8 (.5) 5.6 (.0) 50.0 (.97) 6.9 (0.7).8 (0.46) x ø3.5 Top view (3.94) 00.0 (4.4) (3.6) Weight: 08 g (7.34 oz) (0.39) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.0) Pin pich tolerance: ±0.5 (±0.0) Mounting hole tolerance: ±0.5 (±0.0) Page 7 of 9

8 Outline Dimensions TMP 60 models for PCB mount: 67.5 (.66).70 (0.50).70 (0.50).05 (0.89) 34. (.35) 6 4 Pin Single AC (N) x M4 THD 7.5 (.08) (3.0) 8.3 (3.50) no pin 4 +Vout 6 Vout 7.65 (.088) 7 no pin 7.94 (.0) (0.) 7.94 (.0) (.33) 3.8 (0.5) Max Screw penetration: 5.5 (0.) Pin diameter:.0 (0.04) Weight: 345 g (.7 oz) TMP 60 models for chassis mount: 67.8 (.67) 38.0 (.50) 50.0 (.97) 8.9 (0.35).8 (0.46) Connection 4 x ø Pin Single AC (N) 3 ntc 4 +Vout Top view (3.94) 00.0 (4.4) (3.54) 5 ntc 6 Vout 7 ntc Weight: 33 g (.7 oz) (0.43) Dimensions in [mm], ( ) = Inches Case tolerances: ±0.5 (±0.0) Mounting hole tolerance: ±0.5 (±0.0) Page 8 of 9

9 DIN-Rail Mounting Kit Adapter for mounting on DIN-rails as per EN (snap-on mounting) DIN-Rail Mounting Kit Order code For model Weight TMP-MK TMP 5xxxC 86 g (6.56 oz) TMP-MK TMP 30xxxC 6 g (9.4 oz) TMP 60xxxC 386 g (3.6 oz) Kit contains interface plate, DIN-rail clip and necessary screws. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at Rev. October Page 9 of 9