DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC

Transcription

1 Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV

2 Overview Highlights DWDM Mux Demux 01 The 40ch Mux Demux is a high density, low loss and standalone passive optical module that provides excellent solution for infrastructure savings by aggregating all 40 DWDM channels at a single site. All 40 channels are spreading over the C- band per ITU-T 100GHz spacing between channels using high quality AAWG technology. The 1310nm port can be used for 40G/100G transceivers (40GBASE-LR4/ER4 resp. 100GBASE-LR4/ER4). The 40 DWDM channels are able to transport 400Gbps so that one can run totally 500Gbps over this unit. Multiplexing of 40 channels on fiber pair Low insertion loss 1U 19'' low profile modular design LC/UPC duplex connectors 1% monitor port for Tx and Rx, ensures easy troubleshooting without downtime 1310nm port allows the overlaid on an existing legacy 1310nm network such as 1000Base SFP LX, 10G SFP+ LR, 40G QSFP+ LR4 and 100G CFP LR4 Compliant to ITU G.694.1, 100GHz ITU gird, 0.8 nm spacing Based on a- athermal AWG technology with Gaussian shaped pass bands Passive, no electricity needed (MTBF ca. 500 years) General Specification TX RX Front View Function LINE MON C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 TX RXTX RX 40DWDMDF RX TX 1310 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 Storage C21 IP 1310nm port for existing legacy traffic -40GBASE-LR4/ER4 QSFP+ -10GBASE-LR XFP/SFP+ 1310nm -100BASE-LX/FX SFP 1310nm MON Port -OSA measuring instrument -Software for analysis. DWDM MUX DEMUX Transmission on fiber pair DWDM MUX DEMUX. 1310nm port for existing legacy traffic -40GBASE-LR4/ER4 QSFP+ -10GBASE-LR XFP/SFP+ 1310nm -100BASE-LX/FX SFP 1310nm MON Port -OSA measuring instrument -Software for analysis

3 DWDM Mux Demux 02 Technical Data Parameter Operating Channel Channel Spacing Channel Passband IL Link IL Filter Technology Adjacent Channel Isolation Non-adjacent Channel Isolation Operating Return Loss Directivity Polarzation Dependent Loss Channel Uniformity Max. Optical Power Operating Temperature Storage Temperature Value 40 channels C21-C60 (DWDM ports) 100 GHz (0.8nm) ±0.11nm < 5.0dB, 3.5dB typical (including connectors and adapters) 0.5dB AAWG (Athermal Arrayed Waveguide Grating) > 25dB > 29dB > 45dB > 50dB < 0.15dB < 1.5dB < 500mW -5 C~ +75 C -40 C~ +80 C

4 DWDM Mux Demux 03 Application Example Copyright Fiberstore Overlaying Datasheet10Gbps Networks with Additional 40Gbps or 100Gbps Services How to add 40Gbps and 100Gbps services to your existing metro networks without effecting the legacy installation? In fact, you just need to plug 40G or 100G fiber optic transceiver into the terminal equipment (Ethernet switch, router etc.), then use the patch cable to connect it to your existing DWDM network via a 1310nm band pass port on the DWDM multiplexer. Since the 1310nm band port is integrated into a 40 channels 100GHz DWDM multiplexer, then this set-up allows the transport of up to 40 x10gbps plus 100Gbps over one fiber pair, in total 500Gbps, but without replacing any infrastructure. Storage Video 40x 10G DWDM Transceiver. 40CH Mux & Demux+1310nm Duplex SM Dark Fiber Up to 500Gbps Service 40CH Mux 40CH Mux & Demux+1310nm & Demux+1310nm. 40x 10G DWDM Transceiver Storage ADM Video 1310nm for 40G LR4/ER4, 100G CFP LR4 1310nm for 40G LR4/ER4, 100G CFP LR wweee eeee DWDM Mux Demux Series Application ID# Description 40/16 CHANNELS 40 channels channels ch. DWDM Mux Demux, 100GHz, C21-C60, with monitor port, 3.0dB typical IL, 4.5dB max IL, duplex LC/UPC 40 ch. DWDM Mux Demux, 100GHz, C21-C60, with monitor port and 1310nm port, 3.5dB typical IL, 5.0dB max IL, duplex LC/UPC 16 ch. DWDM Mux Demux, 100GHz, C21-C36, with 16 channels expansion port, IL <4.95dB, duplex LC/UPC Page of (755) 4 (755) sales@fiberstore.com +86 (755) sales@fiberstore.com FSCOM

5 DWDM Mux Demux 04 Application ID# Description 8 CHANNELS SINGLE FIBER 8 channels channels Pair Packaged 8 ch. DWDM Mux Demux, 100GHz, C21- C36 for transceiver wavelengths, with expansion port, IL <4.95dB/unit, LC/UPC Pair Packaged 8 ch. DWDM Mux Demux, 100GHz, C43- C58 for transceiver wavelengths, IL <4.95dB/unit, LC/UPC *Standard products are listed above. Customized specifications are available upon request. ITU Channel Guiding ITU Channel (xx or yy) Wavelengt h (nm) ITU Channel (xx or yy) Wavelengt h (nm) Layout and Dimensions (skip plastic frame) - Width: 481.8±0.2mm(19'') - The color of the module is black - Height: 44mm(1.73'') - All fonts and lables are printed in black - Depth: 261.2mm(10.28'') mm mm 44.00mm ±0.2mm

6 FS.COM business radiate worldwide, if you need more efficient solutions for Data Center, Optical Transport Network, and Enterprise Network, please contact us at For more information visit FS.COM DATA CENTER & CLOUD COMPUTING All statements, technical information, and recommendations related to the products here are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact FS for more information. Copyright FS.COM All Rights Reserved.