Keysight Technologies A Little db ll Do Ya!

Transcription

1 Keysight Technologies A Little db ll Do Ya! A Survey of Low Power Wide Area Network (LPWAN) RF Technologies Application Brief The rapid growth of the Internet of Things (IoT) is driving growth and innovation in low power wide area network (LPWAN) technologies. The wide variety of radio technologies gives IoT solution providers a choice of communication protocols, but that choice can be very complex, with many tradeoffs and confusing details to consider. This application brief will summarize the key factors, with a focus on data transmission range, link budget, and data rate.

2 02 Keysight A Little db ll Do Ya! - Application Brief Technology Overviews Ingenu Ingenu is a company based in San Diego, California whose LPWAN solution is based on their proprietary RPMA (Random Phase Multiple Access) technology. It uses the 2.4-GHz ISM band worldwide, and Ingenu claims that RPMA is specifically designed to support to billions or tens of billions of devices. LoRaWAN LoRaWAN, which stands for Long Range Wide Area Network, is a specification for batterypowered, wireless IoT devices that uses a chirped spread spectrum (CSS) technology developed by Semtech. The upper-layer protocol specification is produced and supported by the LoRa Alliance, which includes companies such as Cisco, IBM, and Renesas, but the protocols for the lower levels are proprietary to Semtech. A LoRaWAN network operates in sub-ghz bands and is typically configured in a star of stars topology, with IoT devices communicating bidirectionally to gateways that are connected to a back-end server. Data rates range from 300 bps to 50 kbps, and the LoRaWAN network server manages the speed tradeoffs between the battery life of the end devices and the overall capacity of the network. Because of the way the LoRa protocol modulates data and corrects for errors, a LoRaWAN signal can actually transmit data at sub-noise floor signal strengths and resist interference. LoRaWAN uses three layers of keyed encryption. LTE Cat-M1 LTE Cat-M1, which is defined by the 3GPP enhanced machine-type communications (emtc) standard, is one of two User Equipment (UE) categories in the LTE IoT family. Both LTE IoT UE categories are designed for IoT-centric traffic, including: Low cost devices Low-power nodes that need long battery life Large numbers of devices Equipment supporting the LTE Cat-M1 standard delivers data rates up to 1 Mbps (upload and download) while coexisting with traffic in existing LTE FDD/TDD spectrum. LTE Cat-M1 also supports Voice over LTE (VoLTE) and includes an enhanced coverage mode that adds 15 db of link budget for further signal penetration inside buildings. LTE Cat-M1 uses 1.4 MHz of bandwidth and leverages legacy LTE synchronization signals such as PSS7 and SSS8. LTE Cat-M1 also supports network-initiated handovers; it can move from one cell to another in milliseconds when requested by the network. LTE Cat-NB1 (NB-IoT) LTE Cat-NB1, also known as NarrowBand IoT (NB-IoT) is another UE category in the LTE IoT family. It is much slower than LTE Cat-M1, with download and upload speeds of roughly 200 kbps as of Release 13, but it requires less than 200 khz of spectrum bandwidth. NB IoT can support up to 200,000 devices per cellular cell, and because it uses the 3GPP licensed cellular network spectrum, it has substantial protection against interference. Unlike LTE Cat-M1, Cat-NB1 does not support active cell-to-cell handover, so it is less suitable for maintaining data continuity in some mobile applications. However, LTE Cat-NB1 does support UE-initiated cell reselection. The link budget of NB-IoT is a few db better than LTE Cat-M1. NB-IoT can also be deployed in refarmed GSM spectrum or multiplexed with LTE carriers in LTE bands. Both LTE Cat-M1 and NB-IoT will be deployed worldwide with software updates to existing infrastructure. The use of licensed spectrum and existing dense infrastructure means that the capacity, coverage, and in-building penetration of NB-IoT will be excellent, comparing very favorably with other LPWAN technologies.

3 03 Keysight A Little db ll Do Ya! - Application Brief Long range WiFi Some equipment suppliers provide long range links using unlicensed WiFi frequencies and radios combined with larger antennas driven by Power over Ethernet (PoE). These support point-to-point and point-to-multipoint configurations, and distances over 250 km have been achieved by specialists working in relatively remote areas. Because long range WiFi exists in an unlicensed part of the electromagnetic spectrum, it is subject to interference, and the power requirement is too high for many IoT end devices. In some IoT applications, such as large-scale smart agriculture or outdoor recreation in remote areas, it may be a good solution to pair a backhaul radio with a local access point to support a cluster of WiFi-enabled IoT devices. Sigfox Sigfox is a proprietary RF connectivity service for the IoT from the French company SIGFOX. It is an inexpensive, low-power solution for connectivity from sensor to cloud, based on a centrally regulated ecosystem of partner organizations and solution providers. Sigfox also supports Sigfox Spot it, an optional, low-energy location service for Sigfox modules that does not rely on GPS. Sigfox uses a subscription-based business model, and it is particularly prevalent in Europe. The technology uses tower-mounted base stations, and its ultra-narrow band (UNB) RF technology is based on binary phase-shift keyed (BPSK) transmissions in sub-ghz bands. Because it uses UNB, Sigfox transmissions tend to be well above the noise floor in any given spectral region, and it is particularly well suited for slow uploads (300 bps or less) of very small data packets. Telensa Telensa is a UK-headquartered company that provides a proprietary, fully bidirectional, ultra-narrowband (UNB) LPWAN solution for smart city applications, such as smart parking, smart lighting, and tracking. Telensa operates in sub-ghz bands worldwide. Telensa provides solutions in some smart city vertical markets, and a smart city API that enables partner organizations to support other applications. WAVIoT WAVIoT is a full-duplex LPWAN technology for machine-to-machine (M2M) telemetry and IoT applications, based on a proprietary Narrowband Fidelity (Nb-Fi) protocol. The WAVIoT company began in 2011, and the WAVIoT technology relies on full duplex gateways based on bidirectional SDR principles using three 120-degree antennas. According to the company, WAVIoT supports: More than two million nodes per gateway A link budget that could be as large as 194 db Effective distances of over 50 km (rural) and km (urban) Weightless-N Weightless-N is an open LPWAN standard from the Weightless Special Interest Group (Weightless SIG). Weightless-N uses sub-ghz ultra-narrow band (UNB) technology in a star topology. The Weightless SIG claims ranges of several kilometers in urban environments. Weightless-N uses a differential binary phase shift keying (DBPSK) digital modulation scheme and a frequency hopping algorithm to mitigate interference. It uses a shared secret key algorithm for implicit authentication and encrypts data via a 128-bit AES algorithm. The technology supports mobile applications and co-located, multi-vendor networks.

4 04 Keysight A Little db ll Do Ya! - Application Brief Wireless M-Bus Wireless M-Bus is a specification defined under EN for RF communication between utility meters (water, gas, electric, and so on) and data aggregation devices. It operates in three sub-ghz bands and is often used in European smart metering and Advanced Metering Infrastructure (AMI) applications. Wireless M-Bus uses a star topology and does not support either IP or mesh networks. Therefore, its software stack is both small and relatively simple to implement. Factors to Consider When you compare various LPWAN technologies, there are several factors to consider. These include: Data transfer speed Costs Industry support Power consumption Data transfer speed It is relatively easy to find maximum data transfer rates for various LPWAN technologies, but there is more to the story. Different technologies support different packet sizes, and they also have different levels of protocol overhead. The interplay among these factors determines the actual goodput (rate of useful data transmission) of the network. Therefore, when you select an RF format, consider how frequently your endpoint device must communicate with the base station, how much data must be transferred, and how much battery life you are willing to spend on each transfer. Costs There are several costs that you need to consider when selecting an LPWAN technology. The hardware costs are the most obvious, but they may turn out to be a relatively small part of the overall picture. You must also consider installation costs, network administration costs, security costs, data transfer costs, and subscription costs. You must also consider the costs of evolving your LPWAN solution over time. Be careful to account for ongoing costs and for risks and hidden costs that go well beyond the price tag on the purchase order for the solution. Industry support Effective distances Cybersecurity Software stability Today s inexpensive solution may turn out to be very expensive if support for it declines in the future, or if your needs expand beyond the solution s capability, either technologically or geographically. Therefore, you must consider the overall level of industry support for various LPWAN technologies, including base station availability, the number of hardware vendors supporting the standard, and the number of backhaul vendors supporting the standard. You should also consider the standard itself; is it open or proprietary? Is security built-in or left to the user? What portion of the spectrum does it use, and how crowded is that spectrum? To what degree is the standard supported by existing communications infrastructure, and to what degree is the standard likely to be supported and kept current as technologies and applications evolve?

5 05 Keysight A Little db ll Do Ya! - Application Brief Distance and data rate Many IoT applications operate in relatively remote areas, using low-power, battery powered devices. In such situations, you must also consider current consumption, effective transmission ranges, and link budgets, as summarized in the table below. All figures are approximate and may vary based on the application and the RF environment. Technology Link Budget (db) Range Max Data Rate (kbps) Ingenu 168 to km 41 LoRaWAN 150 to km 5 LTE Cat-M km 1000 LTE Cat-NB km 200 Sigfox km 0.3 WAVIoT ~160 2 km 0.1 Wireless M-Bus km 2.4 Summary The LPWAN marketplace is complex and evolving quickly. As a key enabler of the IoT, it is a source of great opportunity, but you must be very careful in balancing the various costs and benefits to ensure a profitable solution over a long period of time.

6 06 Keysight A Little db ll Do Ya! - Application Brief Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. For more information on Keysight Technologies products, applications or services, please contact your local Keysight office. The complete list is available at: Americas Canada (877) Brazil Mexico United States (800) From Hewlett-Packard to Agilent to Keysight mykeysight A personalized view into the information most relevant to you. Keysight Services Our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. The result? We help you implement new technologies and engineer improved processes that lower costs. Three-Year Warranty Keysight s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with three-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products. Keysight Assurance Plans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners Get the best of both worlds: Keysight s measurement expertise and product breadth, combined with channel partner convenience. Asia Pacific Australia China Hong Kong India Japan 0120 (421) 345 Korea Malaysia Singapore Taiwan Other AP Countries (65) Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) United Kingdom For other unlisted countries: (BP ) DEKRA Certified ISO9001 Quality Management System Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. Keysight Technologies, 2017 Published in USA, May 24, EN