Mobile Communications DC Sources W

Transcription

1 W 66319B/D, 66321B/D Ideal for testing wireless and battery powered devices Several times improvement in measurement throughput over general purpose DC sources Superior output transient performance with short or long load leads (up to 6 meters) Dynamic measurement system for accurate battery current drain measurement Easy-to-use Graphical User Interface and analysis tools for bench top use Specifications (at 0 to 55 C unless otherwise specified) 66309B/D 66311B/D 66319B/D 66321B/D 66332A 66332A- J01 Special Order Option Overcome Battery Powered Device Testing Challenges Digital communications devices and digital battery powered devices present a unique testing challenge: they draw rapid pulses of current. By offering superior transient performance, unmatched in the marketplace, the Agilent Mobile Communications DC Sources dramatically reduce the transient voltage drop due to pulse loading characteristics of digital communications devices. The Agilent Mobile Communications DC Sources enable you to maximize test throughput by minimizing test interruption due to false trigger of device low voltage shutdown. Dynamic Measurement Capabilities The Agilent Mobile Communications DC Sources offer a built-in advanced measurement system to accurately measure battery current drains when the device operates in different modes (such as talk mode, active mode, standby mode, and off/sleep mode). Measurements made during these modes are critical for ensuring that your devices are operating properly and that you are getting the most out of the battery. Simulate both Main Battery and Charger Single output models are recommended when you need to provide power as a replacement to your Number of outputs GPIB Yes Yes Yes Yes Yes Yes Output ratings Voltage 0 to 15 V 0 to 15 V 0 to 15 V 0 to 15 V 0 to 20 V 0 to 30 V Current 0 to 3 A 0 to 3 A 0 to 3 A 0 to 3 A 0 to 5 A 0 to 3.3 A Peak current for up to 7 ms 5 A 5 A 5 A 5 A 5 A 3.3 A Programming accuracy at 25 C ±5 C (% of setting plus fixed) Voltage 0.05%+ 10 mv 10 mv 10 mv 10 mv 10 mv 15 mv +Current 0.05% ma 1.33 ma 1.33 ma 1.33 ma 2 ma 2 ma Ripple and Noise (20 Hz to 20 MHz) Voltage rms 1 mv 1 mv 1 mv 1 mv 0.3 mv 0.5 mv peak-to-peak 6 mv 6 mv 6 mv 6 mv 3 mv 5 mv Current rms 2 ma 2 ma 2 ma 2 ma 2 ma 2 ma DC measurement accuracy Voltage 0.03%+ 5 mv 5 mv 5 mv 5 mv 3 mv 5 mv +20 ma to + rated current 0.2%+ 0.5 ma ma ma 0.5 ma -20 ma to - rated current 0.2%+ 1.1 ma 1.1 ma 1.1 ma 1.1 ma -3 A to + 5 A 0.2% 0.5 ma ma 2-1 A to + 1 A 0.1% 0.2 ma 0.2 ma -20 ma to + 20 ma range 0.1%+ 2.5 µa 2.5 µa 2.5 µa 2.5 µa 2.5 µa 2.5 µa Dynamic measurement system Buffer size 4096 points 4096 points 4096 points 4096 points 4096 points 4096 points Sampling interval 15 µs - 15 µs - 15 µs - 15 µs - 15 µs - 15 µs - 31,200 s 31,200 s 31,200 s 31,200 s 31,200 s 31,200 s Transient response time <35 µs 3 <35 µs 3 <20 µs 3 <20 µs <100 µs 4 <100 µs 4 Transient voltage dip 70 mv 70 mv 40 mv 40 mv 500 mv 650 mv (typical with up to 15 feet 22 AWG wiring) Programmable output resistance Range mω to -40 mω to +1 Ω +1 Ω Programming accuracy 0.5% + 0.5% + 2 mω 2 mω Resolution 1 mω 1 mω 83

2 W (Continued) Specifications (at 0 to 55 C unless otherwise specified) 66309B/D 66311B/D 66319B/D 66321B/D 66332A 66332A- J01 Special Order Option device s main battery during testing. Dual output models are recommended when you need to provide power as a replacement to your device s main battery and when you need to simulate the battery charger power; Use one output to supply current to the battery charger input port and the second output to connect in place of the main battery (which sinks current to simulate the main battery being charged). Performs Like a Battery With their battery emulation features, the Agilent 66319B/D and 66321B/D allow you to test your devices under the same power conditions that exist in actual use. Emulating the battery is key when characterizing battery operating life and detecting early product failures. These DC sources simulate the effects of internal resistance of the battery, enabling them to emulate the operation of various battery types or batteries in different charge states. Plus, these DC sources can simulate negative resistance so that you can compensate for voltage drop due to wiring in a fixture. Feature Summary Agilent has designed in the capability and flexibility that is required for accurately testing today s communications devices as well as your next generation designs for cell phones (formats include: 3G, cdma2000, WCDMA, CDMA, TDMA, GSM, PCS, DECT, TETRA, PHS, NADC), PDAs, Bluetooth TM enabled devices, and Wireless LAN access devices. Voltmeter input (66309D, 66319D, 66311D and 66321D only) Input range -25 to -25 to -25 to -25 to +25 Vdc +25 Vdc +25 Vdc +25 Vdc DC readback accuracy 0.04% % % % + (at 25 C ±5 C) 5 mv 5 mv 5 mv 5 mv AC + DC readback accuracy 1% + 1% + 1% + 1% + (at 25 C ±5 C) with DC plus 5 mv 5 mv 5 mv 5 mv a sinewave input > 25 mv rms (60 Hz to (60 Hz to (60 Hz to (60 Hz to 10 khz) 10 khz) 10 khz) 10 khz) Auxilary output (66309B/D and 66319B/D) Output ratings Voltage 0 to 12V 0 to 12V Current 0 to 1.5 A 0 to 1.5 A Programming accuracy Voltage 0.2% + 0.2% + 40 mv 40 mv +Current 0.2% + 0.2% ma 4.5 ma DC measurement accuracy Voltage 0.2% + 0.2% + 15 mv 15 mv +Current 0.2% + 0.2% + 3 ma 3 ma Ripple and Noise (20 Hz to 20 MHz) Voltage rms 1 mv 1 mv peak-to-peak 6 mv 6 mv Current rms 2 ma 2 ma Notes: A also has RS-232 interface. 2 Applies with current detector set to DC. 3 Time for the output voltage to recover to within 20 mv of final value after 0.1 to 1.5 A load change in high capacitance compensation range. 4 Time for the output voltage to recover to within 20 mv or 0.1% of the voltage rating of the unit following a change in load current of up to 50% of the output current rating. Supplemental Characteristics DC Floating Voltage Output terminals can be floated up to +/- 50 Vdc maximum from chassis ground (+/- 240 Vdc for 66332A) Remote Sensing Voltage Drop For 66332A: Up to 2 V can be dropped in each load lead. Add 2 mv to the load regulation specification for each 1 V drop in the positive output lead. For 66309B/D, 66311B/D: Up to 4 V can be dropped in each load lead. Add 2 mv to the load regulation specification for each 1 V drop in the positive output lead. For 66319B/D main output, 66321B/D main (Non-warranted characteristics determined by design and useful in applying the product) output: Up to 3 V total can be dropped in both load leads. For 66319B/D auxiliary output, 66321B/D auxiliary output: Up to 4 V total can be dropped in both load leads. Command Processing Time Average time required for the output voltage to begin to change following receipt of GPIB data is 4 ms (with display disabled). 84

3 W (Continued) All models offer: Fast output response technology Programmable output response compensation Advanced DSP-based dynamic measurements Current sinking for testing and calibrating charger circuitry Extensive protection features (including broken sense lead detection) GPIB Interface, SCPI (Standard Commands for Programmable Instruments), VXIplug&play drivers In addition, the 66319B/D and 66321B/D high performance models offer: Output resistance programming (positive and negative) Superior output stability with up to 6 meters of load leads Excellent transient voltage drop (typically < 30 mv) Three current measurement ranges NEW! Additional advanced battery drain measurements (CCDF, long term battery drain) The new and improved 66319B/D and 66321B/D high performance models are recommended for new automated test system platforms and for R&D applications. The 66309B/D and the 66311B/D are available for those customers who need to replicate existing test platforms and who do not want to re-engineer existing automated test system designs. Supplemental Characteristics (Continued) Output Programming Response Time For 66332A: The rise and fall time (10/90% and 90/10%) of the output voltage is < 2 ms (400 µs in fast mode). The output voltage change settles within 1 LSB (0.025% x full scale voltage) of final value in < 6 ms (2 ms in fast mode). For 66311B/D, 66321B/D, 66309B/D output 1, 66319B/D output 1: The rise and fall time (10/90% and 90/10%) of the output voltage is < 200 µs. Measurement Time Average time to process query, calculate measurement parameter and return data is 50 ms (includes the default time of 30 ms for acquiring data and 20 ms data processing overhead). GPIB Interface Capabilities IEEE-488.2, SCPI command set, 6630A series programming capability (not supported in 66309B/D, 66319B/D, 66321B/D) Software Driver: VXIPlug&Play IntuiLink Connectivity Software Application Notes: Mobile Communications Device Testing (AN 1310) EN Evaluating Battery Run-down Performance Using the Agilent 66319D or 66321D with Option # A Device Characterization Software (AN 1427) EN (Non-warranted characteristics determined by design and useful in applying the product) Input power (at worst case conditions: full load, 100 Vac mains) For 66311B/D, 66321B/D: 1.7 A, 125 W. For 66309B/D, 66319B/D: 2 A, 170 W. For 66332A: 3.5 A, 250 W. Regulatory Compliance Complies with EMC directive 89/336/EEC (ISM 1B). Warranty Period One year Size For 66309B/D, 66311B/D, 66319B/D, 66321B/D: mm W x 88.1 mm H x 435 mm D (8.4 in x 3.5 in x in). For 66332A: mm W x 88.1 mm H x mm D (16.8 in x 3.5 in x 14.3 in). Weight For 66309B/D, 66311B/D, 66319B/D, 66321B/D: 9.07 kg (20 lb) net, 11.1 kg (24.5 lb) shipping. For 66332A: 12.7 kg (28 lb) net, 15.0 kg (33 lb) shipping. Using Battery Drain Analysis to Improve Mobile-Device Operating Time EN Current Drain Analysis Enhances WLAN Network Card Design and Test (AN 1468) EN 85

4 W (Continued) Ordering Information Opt to 106 Vac, 47 to 63 Hz Opt to 127 Vac, 47 to 63 Hz Opt to 233 Vac, 47 to 63 Hz Opt to 253 Vac, 47 to 63 Hz Opt 004 Make Hi Compensation Mode as default setting Opt 020 Front-panel Binding Posts (66332A only) Opt UJ0 No front panel binding posts (66332A only) Opt 053 Add 14565A Device Characterization Software with Battery Drain Analysis (66319B/D, 66321B/D) Opt 521 Solid State Relays (66309B/D, 66319B/D) Opt AYK No Solid State Relays (66309B/D,66319B/D) Opt 760 Isolation and Reversal Relays (66332A only) Opt 8ZJ Delete feet Opt 8ZL Include feet * Opt 1CM Rack-mount kit 66309B/D, 66311B/D, 66319B/D, 66321B/D: p/n ; 66332A: p/n * Opt 1CP Rack-mount Kit with Handles, p/n (66332A only) * Opt AXS Rack-mount Kit for side-by-side mounting, (N/A for 66332A) Locking Kit p/n ; Flange Kit p/n Opt 0L1 Full documentation on CD-ROM, and printed standard documentation package Opt 0L2 Extra copy of standard printed documentation package Opt 0B0 Full documentation on CD-ROM only Opt 0B3 Service manual *Support rails required Accessories Agilent Models: 66309B/D, 66311B/D, 66319B/D, 66321B/D p/n Rack Slide Kit (66332A only) E3663AC Support rails for Agilent rack cabinets 14565A Device Characterization Software with Battery Drain Analysis Note: Battery Drain Analysis means Data Logging and CCDF measurements. These capabilities require models 66319B, 66319D, 66321B or 66321D with version A firmware or higher and 14565A software version 3.01 or higher. Top 425.8mm 16.8" 212.8mm 8.4" 88.1mm 3.5" Rear 435mm 17.13" Side 86

5 W (Continued) Agilent Models: A Top 364.4mm 14.3" Terminal Strip Detail Output 2 & 3 +S + - -S Screw Size: M35 x mm 3.93" 88.1mm 3.5" 425.4mm 16.75" Side Rear 87

6 14565A Device Characterization Software Ideal for testing wireless and battery powered devices Converts Mobile Communications DC Source into a powerful bench top tool for R&D and Repair Easy-to-use Graphical User Interface and analysis tools No programming required Simplify test and analysis in R&D or on the repair bench With the Agilent 14565A Device Characterization Software, testing, analyzing, and troubleshooting wireless and battery powered devices is made simple. The 14565A provides a graphical user interface that lets you easily control the Mobile Communications DC Sources. It gives you access to the Mobile Communications DC Source s highpowered measurement system and provides an oscilloscope-like view of the voltage or current waveforms of the device under test. The 14565A provides reference waveform save/ recall, and provides oscilloscope-like measurement and analysis including voltage and current waveform parameter measurements, triggering, markers, zoom control, and more. By using the advanced capabilities built into the power supply, you can spend more time testing and analyzing instead of configuring and reconfiguring multiple pieces of test equipment, such as a current shunt, oscilloscope, current probe, DMM, and datalogger. (Continued) Power Supply output control Measurement setup control Waveform Capture Mode Data Logging Mode Calculated measurements Zoom capability Oscilloscope-like view of battery current profiles Peak current Talk-mode Standby-mode Off-mode Markers for fast analysts More detailed specifications at 88

7 Device Characterization Software (Continued) When coupled with the 66319B/D or the 66321B/D, the 14565A also provides Battery Drain Analysis capabilities. More than just measuring battery run time, Battery Drain Analysis allows you to characterize current out of the battery and make tradeoffs in design that impact the current drain and battery life. This new version of the 14565A includes the measurement and data reduction tools needed to analyze and visualize the current being drained from your battery. By providing CCDF measurements and long-term battery drain data logging, the 14565A and 66319/21 provide a complete solution for analyzing current drain so that you can optimize your device designs to achieve maximum battery run time. Key features For R&D Fast and easy test setup Digitize current waveforms Accurately log battery current drain measurements from 10 seconds to 1000 hours at 64,000 measurements per second Test designs simulating different battery conditions with programmable output resistance Zoom capability for analyzing waveform anomalies Adjust markers for fast measurements on digitized waveforms Easily document your test results Record test data to files for archive or analysis by other software packages For Repair Compact design with multiple instrument functionality Fast and easy test setup Graphical user software, no programming required Dual DC outputs for replacing the main battery and the power adapter/charger power source Electronic load for testing the battery charger circuitry Programmable soft limits to protect against incorrect voltage settings Ordering Information 14565A Device Characterization Software with Battery Drain Analysis Note: Battery Drain Analysis means Data Logging and CCDF measurements. These capabilities require models 66319B, 66319D, 66321B or 66321D with version A firmware or higher and 14565A software version 3.01 or higher. More detailed specifications at 89

8 Your Requested Excerpt from the Agilent System and Bench Instruments Catalog 2006 The preceding page(s) are an excerpt from the 2006 System and Bench Instruments Catalog. We hope that these pages supply the information that you currently need. If you would like to have further information about the extensive selection of Agilent DC power supplies, please visit to print a copy of the complete catalog, or to request that a copy be sent to you. You will also find a lot of other useful information on this Web site. In the full System and Bench Instruments Catalog, you will find that Agilent offers much more than DC power supplies. This catalog contains detailed technical and application information on digital multimeters, DC power supplies, arbitrary waveform generators, and many more instruments. If you need basic, clean, power for your lab bench, it s there. In each power product category we have also integrated the capabilities you need for a complete power solution, including extensive measurement and analysis capabilities. Please give us a call at your local Agilent Technologies sales office, or call a regional office listed, for assistance in choosing or using Agilent power products. Keep up to date with Agilent s Test and Measurement Updates As an Update subscriber, you will receive periodic customized updates that match the areas of interest that you have specified. Your update will include products and services, applications and support information, events and promotions. Sign up today at Check off DC power supplies, AC power sources or electronic loads on your registration form, and we will promptly let you know what s new in power products. Our Privacy Statement at describes our commitment to you regarding your privacy. For more information on Agilent Technologies products, applications or services, please contact your local Agilent office. The complete list is available at: Phone or Fax United States: (tel) (fax) Canada: (tel) (fax) China: (tel) (fax) Europe: (tel) Japan: (tel) (81) (fax) (81) Korea: (tel) (080) (fax) (080) Latin America: (tel) (305) Taiwan: (tel) (fax) Other Asia Pacific Countries: (tel) (65) (fax) (65) tm_ap@agilent.com Contacts revised: 09/26/05 Product specifications and descriptions in this document subject to change without notice. Agilent Technologies, Inc Printed in the USA, February 8, 2006 Agilent Technologies