RS9113 USB Half Mini Card

Transcription

1 June 2015 Redpine Signals, Inc N. First Street, #680 San Jose, CA Tel: (408) Fax: (408) Website:

2 Overview: The RS9113 USB Half Mini Card is based on Redpine Signals RS9113 ultralowpower Convergence SoC. It offers dualband 1x n, dualmode Bluetooth 4.0 and ZigBee in a single device over USB in a Mini PCIe Card form factor. It is a high performance, long range and ultralow power device and includes a multithreaded MAC processor called ThreadArch, baseband digital signal processor, calibration OTP memory, dualband RF transceiver, dualband highpower amplifiers, baluns, diplexers, diversity switch, dualband antenna, u.fl connector and QuadSPI flash. The software architecture for the USB Half Mini Card, n Link, realizes a hostbased architecture where the necessary MAC and PHY layers are implemented in the device to support highperformance, long range WLAN, Bluetooth and ZigBee applications in a 32bit host processor over USB interface. Applications: Smartphones, Tablets and ereaders VoWiFi phones Smart meters and inhome displays Industrial automation and telemetry MP3 music and MP4 video players Medical devices Industrial monitoring and control Home and building automation Wireless Headset Features: WLAN: Compliant to singlespatial steam IEEE a/b/g/n with dual band (2.4 and 5 GHz) support. Support for 20MHz and 40MHz channel bandwidths. Transmit power up to +18dBm with integrated PA. Receive sensitivity of 97dBm. Bluetooth: Compliant to dualmode Bluetooth 4.0 Transmit power up to 15dBm (class1) with integrated PA. Receive sensitivity of 94 dbm. ZigBee: Compliant to IEEE Transmit power up to 15 dbm with integrated PA. Receive sensitivity of 102 dbm. ZigBee Pro stack embedded. nlink : Seamless integration with 32bit processors over USB. Host Drivers for Linux, Wind River Linux, Android and Windows 1 General: FCC, IC, ETSI/CE Certified u.fl connector for external antenna connection is selectable. Single supply of 3.0 to 3.6 V Operating temperature range: 40 o C to +85 o C 1 Drivers for Linux, Wind River Linux and Android available now. Contact Redpine Signals Sales (sales@redpinesignals.com) for availability of drivers for Windows. Page 2

3 About this Document This document describes the RS9113 USB Half Mini Card s specifications. The document covers the hardware and software features, package descriptions, pin descriptions, interface specifications, electrical characteristics, certification information and ordering information. Disclaimer: The information in this document pertains to information related to Redpine Signals, Inc. products. This information is provided as a service to our customers, and may be used for information purposes only. Redpine assumes no liabilities or responsibilities for errors or omissions in this document. This document may be changed at any time at Redpine s sole discretion without any prior notice to anyone. Redpine is not committed to updating this document in the future. Copyright 2015 Redpine Signals, Inc. All rights reserved. Page 3

4 Table of Contents 1 Overview Block Diagram Product Naming and Variants Features Package Description Mechanical Characteristics Half Mini Card Dimensions Pinout and Pin Description Pinout of the RS9113 USB Half Mini Card Pin Description Specifications Absolute Maximum Ratings Recommended Operating Conditions DC Characteristics Digital I/O Signals AC Characteristics USB Interface Timing Characteristics Electrical Characteristics Voltage Thresholds Reset Timing Regulatory Specifications Software Architecture nlink Software Architecture Operating System Support Ordering Information Collateral Contact Information Table of Figures Figure 1: Block Diagram of RS9113 USB Half Mini Card... 6 Figure 2: RS9113 USB Half Mini Card Naming Convention... 7 Figure 3: Package Dimensions Figure 4: Reset Timing Figure 5: nlink Software Architecture Table of Tables Table 1: RS9113 USB Half Mini Card Features Table 2: Mechanical Dimensions Table 4: Pin Descriptions Table 5: Absolute Maximum Ratings Table 6: Recommended Operating Conditions Table 7: Input/Output DC Characteristics Page 4

5 Table 8: Timing Characteristics for USB Interface Table 9: Electrical Characteristics for USB Interface Table 10: Input/Output DC Characteristics Table 11: Regulatory Certifications Page 5

6 1 Overview The RS9113 USB Half Mini Cards are multiwireless Combo devices based on Redpine Signals RS9113 ultralowpower Convergence SoC. They offer dualband 1x n, dualmode Bluetooth 4.0 and ZigBee in a single device over USB in a Mini PCIe Card form factor. They are highperformance devices which realize a zerohost architecture. The necessary MAC and PHY layers are implemented in the device to support WLAN, Bluetooth and ZigBee applications and they interface with 32bit host processors over USB interface. They include a multithreaded MAC processor called ThreadArch, baseband digital signal processor, calibration OTP memory, dualband RF transceiver, dualband highpower amplifiers, baluns, diplexers, diversity switch, dualband antenna, u.fl connector and QuadSPI flash. 1.1 Block Diagram The following figure is the block diagram for the RS9113 USB Half Mini Card. 1.2 Product Naming and Variants Figure 1: Block Diagram of RS9113 USB Half Mini Card The figure below shows the naming convention for the USB Half Mini Card s variants. Page 6

7 RS9113 N Y Z D 3 N Base Module Family N Y Z = WiFi = B with BT, 0 without BT = Z with ZigBee, 0 without ZigBee Figure 2: RS9113 USB Half Mini Card Naming Convention NOTE: 1) The possible combinations of NYZ are N00, NB0, N0Z and NBZ. 2) The devices and the accompanying software/firmware support a maximum of two wireless protocols simultaneously. For the full list of available variants, please see the section on Ordering Information. Page 7

8 2 Features The table below lists the features supported by the RS9113 USB Half Mini Card. S.No. Feature Description 1. Wireless Protocols IEEE a, b, g, n Bluetooth 4.0 (2.1+EDR, LE) ZigBee Operational Modes Supported 2 WiFi Access Point with support for upto 32 clients WiFi Client WiFi Access Point + Client WiFi Direct WiFi Client + Bluetooth Classic (EDR v2.1) WiFi Client + Bluetooth Low Energy WiFi Client + ZigBee End Device ZigBee Router 3 ZigBee Coordinator 3 3. WLAN Bandwidth 20 and 40 MHz 4. WLAN Data Rates b: 1, 2, 5.5, 11 Mbps g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps n: MCS0 to MCS7 with and without Short GI 5. WLAN Operating Frequency Range 2412 MHz 2484 MHz 4910 MHz 5825 MHz 6. WLAN Modulation OFDM with BPSK, QPSK, 16QAM, and 64QAM b with CCK and DSSS 7. WLAN Transmit Power 18 dbm 8. WLAN Receive Sensitivity 97 dbm 9. Bluetooth Data Rates 1, 2, 3 Mbps 10. Bluetooth Operating Frequency Range 2402 MHz 2480 MHz 11. Bluetooth Channel Spacing BR, EDR 1 MHz 2 For other coexistence modes not listed here, contact Redpine Signals Sales (sales@redpinesignals.com) for custom offerings. 3 Supported in future software releases. Page 8

9 S.No. Feature Description LE 2 MHz 12. Bluetooth Modulation GFSK, DQPSK, 8DPSK 13. Bluetooth Transmit Power 15 dbm (Class1) 14. Bluetooth Receive Sensitivity 94 dbm 15. ZigBee Data Rate 250 kbps 16. ZigBee Operating Frequency Range 2405 MHz 2480 MHz 17. ZigBee Modulation DSSS 18. ZigBee Transmit Power 15 dbm 19. ZigBee Receive Sensitivity 102 dbm 20. Deep Sleep Current Consumption < 10 µa in disconnected state < 30 µa in connected state 21. Host Interfaces USB USB Host Interface Supports 480 Mbps High Speed (HS) mode and 12 Mbps Full Speed (FS) modes. 23. Software Architecture Architecture for Zero Host Load for Datapath. Refer to the Software Architecture section for more details. 24. Wireless Security Features WPA/WPA2 Personal WPA/WPA2 Enterprise Security WPS 25. Advanced Security Features 4 PUF Based Security AES 128/256bit RSA SHA, SHA256 ECDH 26. Application throughputs 5 Upto 90 Mbps UDP Upto 70 Mbps TCP 4 These features are not part of the standard firmware. Contact Redpine Signals Sales (sales@redpinesignals.com) for details. 5 The throughputs mentioned here have been recorded in an ideal environment over USB. Throughputs observed in other environments might differ based on the host interface speeds (e.g., SPI clock frequency, UART Baud Rate, etc.), wireless medium, physical obstacles, distance, etc. Page 9

10 S.No. Feature Description 27. Operating Temperature Range 40 o C to +85 o C 28. Supply Voltages and Options Single 3.0 to 3.6V Supply 29. WLAN Features Dynamic selection of data rate depending on the channel statistics. Hardware accelerators for WEP 64/128bit, TKIP, AES and WPS Support for WMM Support for AMPDU Aggregation/Deaggregation and AMSDU Deaggregation Support for IEEE d/e/I, j 6, w/k/v/r/h Bluetooth Features Supports Classic mode piconet with seven active slaves 7. Supports Low Energy mode with seven active slaves 8. Supports scatternet with two slave roles or one master role and one slave role while being visible 9. Proprietary Mode to support 15 active slaves by using the reserved bit 6. Bluetooth security features: Authentication, Pairing and Encryption. Supports low power connection states such as hold, sniff and park modes with selectable sniff intervals 10. Adaptive Frequency Hopping (AFH), Interlaced scanning, Quality of Service, Channel Quality Driven Data Rate 6. Channel assessment algorithm provides fast and accurate determination of occupied channels for use in adaptive frequency hopping mode 6. Proprietary FEC for DQPSK and 8PSK modes. Provides finer granularity of range vs. throughput control. 31. Bluetooth Profiles/Protocols All profiles are to be implemented in the Host. 32. ZigBee Features MAC: Supported modes: ZigBee Coordinator, Router 11, End device. 6 Supported in future software releases. 7 Current software releases support one slave. 8 Current software releases support three slaves. 9 Supported in future software releases. 10 Hold and Park supported in future software releases. 11 Coordinator and Router modes supported in future software releases. Page 10

11 S.No. Feature Description PHY features: Beacon 12, NonBeacon, CCM Security, Promiscuous mode. Power saving using End Device Sleep, network periodic sleep. Supports CCM* Security levels 17. Supports Active scan, channel selection, Association and Disassociation, Orphan scanning, and coordinator realignment. Network Layer: Network Discovery Energy Detection Scan Network Formation Permit Joining Network Join Network Rejoin Stochastic Addressing Network Leave Network Reset Routing (Symmetric) Address Conflict PAN ID Conflict Network Status Updates Link Status Commands Data Transmission (Unicast and Broadcast) NIB Management Manytoone and source routing Multicast relaying and route discovery APS Layer: APSDE Data primitives APSME Group Services APSME Binding Services APSME Fragmentation Service Reliable Transport Duplicate Rejection APS Layer Security 12 Supported in future software releases. Page 11

12 S.No. Feature Description ZDO/ZDP Layer: Device Discovery Service Discovery Security Manager Node Manager Network Manager Binding Manager Group Manager Startup Attributes Set 33. Power Save Modes 13 Dynamic Clock Gating Low Power (LP) Mode Modem and RF Transceiver Powered off. Host Interface is active. Supported with all host interfaces. 34. Miscellaneous Features Automatic Firmware Checksum validation and upgrade at powerup Table 1: RS9113 USB Half Mini Card Features 13 Refer to Technical Reference Manual for more details on how to use these modes. Refer to the GPIO section of the Pin Description table to understand the signal requirements for these modes. Page 12

13 3 Package Description 3.1 Mechanical Characteristics Parameter Value (L X W X H) Units Half Mini Card Dimensions 30 x 26.8 x mm Tolerance ±0.1 mm Table 2: Mechanical Dimensions 3.2 Half Mini Card Dimensions Figure 3: Package Dimensions 14 The Height of the Half Mini Card includes the height of the components on the top and bottom and also the PCB thickness Page 13

14 4 Pinout and Pin Description 4.1 Pinout of the RS9113 USB Half Mini Card Pin No. Pin Name Pin No. Pin Name Top Side Bottom Side 1 WAKE_N 2 VDD_33 3 RESERVED 4 GND 5 RESERVED 6 VDD_15 7 CLKREQ# 8 RESERVED 9 GND 10 RESERVED 11 REFCLK_P 12 RESERVED 13 REFCLK_N 14 RESERVED 15 GND 16 RESERVED Mechanical Key 17 RESERVED 18 GND 19 RESERVED 20 RESERVED 21 GND 22 PERST_N 23 PERn0 24 AUX_VDD_33 25 PERp0 26 GND 27 GND 28 VDD_15 29 GND 30 SMB_CLK 31 PETn0 32 SMB_DATA 33 PETp0 34 GND 35 GND 36 USB_DN 37 RESERVED 38 USB_DP 39 RESERVED 40 GND 41 RESERVED 42 LED_WWAN_N 43 RESERVED 44 LED_WLAN_N 45 RESERVED 46 LED_WPAN_N Page 14

15 Pin No. Pin Name Pin No. Pin Name Top Side Bottom Side 47 RESERVED 48 VDD_15 49 RESERVED 50 GND 51 RESERVED 52 VDD_33 Table 3: Pinout of the USB Half Mini Card 4.2 Pin Description This section describes the pins of the RS9113 USB Half Mini Card. S.No. Pin Name Pin No. Direction Description Control Interface 1. PERST_N 22 Input Active Low Reset signal. USB Interface 2. USB_DN 36 Inout Negative Data Channel for USB. 3. USB_DP 38 Inout Positive Data Channel for USB. Power and Ground Interface 4. VDD_33 2, 52 Input 3.3V Power Supply 5. AUX_VDD_33 24 Input 3.3V Power Supply 6. GND 4, 9, 15, 18, 21, 26, 27, 29, 34, 35, 40, 50 Miscellaneous Ground Common Ground 7. WAKE_N 1 Output This signal is presently unused and connected to a pullup resistor. 8. VDD_15 6, 28, 48 Input This signal is presently unused and left 9. CLKREQ_N 7 Output This signal is presently unused and connected to a pullup resistor. 10. REFCLK_P 11 Input This signal is presently unused and left Page 15

16 S.No. Pin Name Pin No. Direction Description 11. REFCLK_N 13 Input This signal is presently unused and left 12. PERn0 23 Input This signal is presently unused and left 13. PERp0 25 Input This signal is presently unused and left 14. PETn0 31 Output This signal is presently unused and left 15. PETp0 33 Output This signal is presently unused and left 16. SMB_CLK 30 Input This signal is presently unused and left 17. SMB_DATA 32 Inout This signal is presently unused and left 18. LED_WWAN_N 42 Output This signal is presently unused and left 19. LED_WLAN_N 44 Output This signal is presently unused and left 20. LED_WPAN_N 46 Output This signal is presently unused and left 21. RESERVED 3, 5, 8, 10, 12, 14, 16, 17, 19, 20, 37, 39, 41, 43, 45, 47, 49, 51 Inout Reserved. Leave Table 4: Pin Descriptions Page 16

17 5 Specifications 5.1 Absolute Maximum Ratings Absolute maximum ratings in the table given below are the values beyond which the device could be damaged. Functional operation at these conditions or beyond these conditions is not guaranteed. Parameter Symbol Value Units Input supply voltages VDD_33, AUX_VDD_ V Storage temperature Tstore 65 to 150 Operating temperature range Top 40 to 85 C C Electrostatic discharge tolerance (HBM) ESDHBM 2000 V Electrostatic discharge tolerance (CDM) ESDCDM 500 V Electrostatic discharge tolerance (MM) ESDMM 60 V Maximum Current consumption in TX mode Imax 500 ma Table 5: Absolute Maximum Ratings 5.2 Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Units Input supply voltages VDD_33, AUX_VDD_ V Ambient Temperature Ta o C Table 6: Recommended Operating Conditions 5.3 DC Characteristics Digital I/O Signals Parameter Min. Typ. Max. Units Input high voltage V Input low voltage V Output low voltage 0.4 V Output high voltage 2.4 V Input leakage current (at 3.3V or 0V) ±10 µa Page 17

18 Parameter Min. Typ. Max. Units Tristate output leakage current (at 3.3V or 0V ±10 µa Table 7: Input/Output DC Characteristics 5.4 AC Characteristics USB Interface Timing Characteristics Parameter Conditions Min. Typ. Max. Units trise 1.5 Mbps ns 12 Mbps Mbps 0.5 tfall 1.5 Mbps ns 12 Mbps Mbps 0.5 Jitter 1.5 Mbps 10 ns 12 Mbps Mbps 0.2 Table 8: Timing Characteristics for USB Interface Electrical Characteristics Parameter Conditions Min. Typ. Max. Units Vcm DC (DC level measured at receiver connector) HS Mode LS/FS Mode V Crossover Voltages LS Mode V FS Mode Power supply ripple noise (Analog 3.3V) < 160 MHz mv Table 9: Electrical Characteristics for USB Interface Voltage Thresholds Parameter Min. Typ. Max. Units ADevice Session Valid V BDevice Session Valid V Page 18

19 Parameter Min. Typ. Max. Units BDevice Session End V Table 10: Input/Output DC Characteristics Reset Timing The figure below shows the requirement for the Reset assertion time during power up and during operation. 5.5 Regulatory Specifications Figure 4: Reset Timing The RS9113 USB Half Mini Card includes the Dual Band RS9113DB module from Redpine Signals which has undergone modular certification for FCC, IC and CE/ETSI. Note that any changes to the module s configuration including (but not limited to) the programming values of the RF Transceiver and Baseband can cause the performance to change beyond the scope of the certification. These changes, if made, may result in the module having to be certified afresh. The table below lists the details of the regulatory certifications. The certification for geographies not listed in the table is in progress. Regulatory Certification Grantee Code Product Code Description FCC XF6 RS9113DB Dualband Module IC 8407A RS9113DB Dualband Module Table 11: Regulatory Certifications NOTE: Click on the links below for details on product variants and ordering information: 1) Product Variants 2) Ordering Information Page 19

20 6 Software Architecture 6.1 nlink Software Architecture The nlink Software Architecture is a host based architecture with OS providing the core functionality support for WiFi, Bluetooth and ZigBee features and having zero load in the data path. The kernel layer interfaces with the host driver to provide functionality for different wireless modules. The figure below illustrates the software architecture of the nlink Software Architecture with WLAN, Bluetooth and ZigBee. Figure 5: nlink Software Architecture Page 20

21 6.1.1 Operating System Support The nlink drivers for the RS9113 USB Half Mini Card are presently available for the following OS : 1) Linux OS (kernel versions to 3.16) 2) Wind River Linux (kernel version ) 3) Android Operating Systems to be supported in the future include WCE2013 and WCE7. Page 21

22 7 Ordering Information The RS9113 USB Half Mini Card has the following variants. Part # WiFi 2.4GHz WiFi 5GHz BT ZB Integrated Antenna & u.fl SW Variant 7.1 Collateral RS9113N00D3N Y Y N N Y nlink RS9113NB0D3N Y Y Y N Y nlink RS9113N0ZD3N Y Y N Y Y nlink RS9113NBZD3N Y Y Y Y Y nlink Table 12: RS9113 USB Half Mini Card Variants The following documentation and software are available along with the RS9113 USB Half Mini Card. Device drivers Technical Reference Manual 7.2 Contact Information For additional information, please contact Sales at Redpine Signals, Inc. Redpine Signals, Inc North First Street, Suite 680, San Jose, CA USA Phone: sales@redpinesignals.com Website: ***** Page 22

23 Revision History Revision No. Version No. Date Changes June 2015 Initial Version Page 23