BlueBeacon Board Bluetooth Low Energy proximity-beacon Data sheet v. 1.0
|
|
|
- Damian Shaw
- 6 years ago
- Views:
Transcription
1 Advertising BlueUp S.r.l.s. BlueBeacon Board Bluetooth Low Energy proximity-beacon Data sheet v. 1.0 Up to 4 slots configurable for Eddystone frame types: UID, URL, TLM, EID. Full support for specifications Eddystone Configuration GATT Service by Google Up to 4 slots configurable for the following frame types: ibeacon, Quuppa, Sensors TX power Advertising interval Global configuration options Default settings -40, -30, -20 to 4 dbm (with 4dB steps). Programmable for each slot 0.1 to 5 secs. Programmable for each slot non-connectable mode, anonymous mode, programmable time period, locked/unlocked mode, change password Eddystone-URL: URL = ADV interval = 1000 msec, TX power = -8dBm ibeacon: UUID = ACFD065E-C3C0-11E3-9BBE-1A514932AC01, major = 0, minor = S/N, ADV interval = 400 msec, TX power = -8dBm Global configuration BlueBeacon Board is a general-purpose Bluetooth Smart proximitybeacon board. It supports simultaneous advertising of multiple frames with ibeacon, Eddystone (full support) and Quuppa format. BlueBeacon Board is provided as a single board, and can be integrated in third-party electronics for proximity-based applications. It offers two alternative antenna options: with integrated antenna or with UFL connector for external antenna. BlueBeacon Board is also supplied in an IP65 boxed version, powered by lithium battery or external DC power supply. BlueBeacon Board is especially suited for industrial applications. connectable, locked Device specifications Electrical specifications Core module MCU core consumption Radio specifications Standard Frequency band Advertising channels Channel spacing TX power Nordic nrf51822 SoC (MCU and radio transceiver) ARM Cortex-M0 32-bit CPU Radio TX: 8mA (@ 0dBm) Radio RX: 9.7 ma Idle mode: 3 ua Sleep mode: 1.5 ua Bluetooth 4. 0 (Bluetooth Low Energy or Bluetooth Smart) to GHz (according Bluetooth 4.0 specifications, worldwide ISM band) CH37 (2.402 GHz), CH38 (2.426 GHz), CH39 (2.480 GHz) (according Bluetooth 4.0 specifications) 2 MHz (according Bluetooth 4.0 specifications) Conducted: +4 dbm (max) BlueBeacon Board Data-sheet ver Aug /5
2 Available versions BlueBeacon 06/ANT BlueBeacon 06/UFL BlueBeacon 06/ANT-BAT BlueBeacon 06/ANT-VDC Single-board OEM version with integrated antenna Single-board OEM version with iufl connector for external antenna IP65-enclosure version with integrated antenna and battery-powered IP65-enclosure version with integrated antenna and external DC supply Specifications for each version are listed in the following tables. BlueBeacon Board OEM: integrated antenna (cod: BlueBeacon 06/ANT) BlueBeacon 06/ANT is a low-profile single-board BLE beacon, with integrated omnidirectional PCB antenna. It can be powered with a wide range of DC voltage values, including standard DC voltage values for electronic systems: 3, 3.3, 5, 12, 24 V It is suitable for integration in electric and electronic equipments. Firmware can be customized for adding specific functionalities: sensor/actuators integration, receiver operation. supply Fastening 2-pole 2.54mm connector header (customizable) Single-board PCB 37 x 40 mm 4x M3 screws (plastic screws are suggested) none -40 C to +85 C BlueBeacon Board Data-sheet ver Aug /5
3 BlueBeacon Board OEM: UFL connector for external antenna (cod: BlueBeacon 06/UFL) supply Fastening BlueBeacon 06/UFL is a low-profile single-board BLE beacon, with UFL connector for external antenna. It can be used when an external directive antenna is required or when the board is installed into a metallic enclosure. It can be powered with a wide range of DC voltage values, including standard DC voltage values for electronic systems: 3, 3.3, 5, 12, 24 V It is suitable for integration in electric and electronic equipments. Firmware can be customized for adding specific functionalities: sensor/actuators integration, receiver operation. External (UFL connector) depends on selected antenna depends on selected antenna 2-pole 2.54mm connector header (customizable) Single-board PCB 37 x 40 mm 4x M3 screws (plastic screws are suggested) none -40 C to +85 C BlueBeacon Board Data-sheet ver Aug /5
4 BlueBeacon Board boxed: integrated antenna, battery-powered (cod: BlueBeacon 06/ANT-BAT) BlueBeacon 06/ANT-BAT is a battery-powered boxed version with integrated omnidirectional PCB antenna, suitable for applications in outdoor or harsh environments. It uses an IP65/NEMA4 rugged industrial enclosure. It is powered by a replaceable industrial lithium thionyl chloride (3.6V) battery, available in two sizes: default 3.6Ah and optional 7.7Ah capacity for a virtually infinite operating life. supply Model Expected life Color Wall fastening Opening Battery (replaceable) lithium thionyl chloride (3.6V nominal voltage) SAFT LS17500 (typical capacity 3600 C) SAFT LS26500 (typical capacity 7700 C) - optional on request 2 to 19 years, 24/7 at room temperature (w/ SAFT LS17500) 6 years with default settings (w/ SAFT LS17500) Polycarbonate plastic enclosure Light grey RAL x 65 x 40 mm Flanges with screws Front cover with screws IP65 / NEMA4-40 C to +85 C (without battery) Expected battery life-time (in months) LS17500 / LS26500 Advertising interval TX power 100 msec 300 msec 500 msec 700 msec 1000 msec 5000 msec 0 dbm 26 / / / / / / dbm 29 / / / / / / dbm 31 / / / / / / 431 Expected battery life-time is estimated assuming nominal battery capacity, self-discharge and room operating temperature. Enabling Eddystone-EID and etlm advertising reduces battery life-time of about 15/20% BlueBeacon Board Data-sheet ver Aug /5
5 BlueBeacon Board boxed: integrated antenna, external-supply (cod: BlueBeacon 06/ANT-VDC) BlueBeacon 06/ANT-VDC is a external-supply boxed version with integrated omnidirectional PCB antenna, suitable for applications in outdoor or harsh environments. It uses an IP65/NEMA4 rugged industrial enclosure. It is powered by external DC voltage, up to 30VDC. supply Color Wall fastening Opening Internal screw connector (with cable gland) Polycarbonate plastic enclosure Light grey RAL7035 (silk-screen printing available on demand) 115 x 65 x 40 mm Flanges with screws Front cover with screws IP65 / NEMA4-40 C to +85 C (without battery) All versions: Certifications CE (Directive 2014/53/UE RED, 2011/65/UE RoHS2) ibeacon, Eddystone, Quuppa BlueUp reserves the right to change product specifications at any time without prior notice. ibeacon is a trademark of Apple Inc., Eddystone is a trademark of Google Inc., Quuppa is a tramemark of Quuppa Oy, ARM and Cortex are trademarks of ARM Inc. BlueBeacon Board Data-sheet ver Aug /5
SmartBeacon-USB/USB-E
SmartBeacon-USB/USB-E Outlook The Sensoro SmartBeacon-USB functions as a beacon while connected to a USB port. The device s craftsmanship is both energy efficient and aesthetic. Features 1. Ease of Use
Sensoro SmartBeacon-4AA Outlook
Sensoro SmartBeacon-4AA Outlook The SmartBeacon-4AA is built for commercial deployment. Features 1. Ultra-Low Power A Bluetooth 4.0 (Bluetooth low energy) Nordic NFR51822 chip with ultra-low power consumption
BLE to Wi-Fi Gateway
BLE to Wi-Fi Gateway Connect Bluetooth Smart devices to the cloud Low power and small form factor MQTT Protocol Support HTTP Configuration Over the air upgrade Integrating the BLE node to cloud with WiFi
Sensoro SmartBeacon-4AA Pro
Sensoro SmartBeacon-4AA Pro Outlook The SmartBeacon-4AA Pro is built for commercial deployment and is specially suited to outdoor situations because its protection against various environmental conditions.
nblue TM BR-LE4.0-S2A (CC2540)
Page 1 of 7 Copyright 2002-2014 BlueRadios, Inc. Bluetooth 4.0 Low Energy Single Mode Class 1 SoC Module nblue TM BR-LE4.0-S2A (CC2540) AT HOME. AT WORK. ON THE ROAD. USING BLUETOOTH LOW ENERGY WIRELESS
LM930 Bluetooth low energy Module (with U.FL Connector) Standalone (With Embedded Bluetooth v4.1 Stack)
Bluetooth low energy Module (with U.FL Connector) Revised 24/JAN/2017 m.11m 10 2.50mm m 22m Features Bluetooth v4.1 specification I2C and UART 14 ma (at 0 dbm) Current Consumption (Tx Mode) 9 digital and
MiniBeacon Plus User Manual
MiniBeacon Plus User Manual Version: V1.0 TEL: 0086-755-2103 8160 EMAIL: sales@minewtech.com URL: www.minewtech.com Page 1 I. Activate the device Turn on: Press the button for 3 seconds, blue led will
TI SimpleLink dual-band CC1350 wireless MCU
TI SimpleLink dual-band CC1350 wireless MCU Sub-1 GHz and Bluetooth low energy in a single-chip Presenter Low-Power Connectivity Solutions 1 SimpleLink ultra-low power platform CC2640: Bluetooth low energy
LM930 Bluetooth low energy Module (with IPEX Connector) Standalone (With Embedded Bluetooth v4.1 Stack)
Bluetooth low energy Module (with IPEX Connector) Revised 25/AUG/2017 m.11m 10 2.50mm m 22m Features Bluetooth v4.1 specification I2C and UART 14 ma Current Consumption (at 0 dbm Tx Output Power) 9 digital
LM931 Bluetooth low energy Module Standalone (With Embedded Bluetooth v4.1 Stack)
Bluetooth low energy Module Revised 04/JUL/2018 Version v1.2 2.50mm 1m 10.1 m m 22m Features Bluetooth v4.1 specification I2C and UART 14 ma Current Consumption (at 0 dbm Tx Output Power) 9 digital and
nblue TM BR-MUSB-LE4.0-S2A (CC2540)
Page 1 of 5 Copyright 2002-2014 BlueRadios, Inc. Bluetooth 4.0 Low Energy Single Mode Class 1 SoC USB Serial Dongle nblue TM BR-MUSB-LE4.0-S2A (CC2540) AT HOME. AT WORK. ON THE ROAD. USING BLUETOOTH LOW
NDB-C0706A Dual Mode Bluetooth Module
NDB-C0706A Dual Mode Bluetooth Module 1 Device Overview 1.1 Description This module is designed with Cypress CYW20706 (previously Broadcom BCM20706) dual mode Bluetooth 5.0 SoC. CYW20706 features 96 MHz
WHO we are. Our technologies. Our way of thinking
WHO we are BluEpyc is the Business Unit of Softwork Group Value Added Technology Provider, focused on wireless technologies, above all Bluetooth Low Energy (BLE), a wireless technology based on a standard
Product Brief. Model: TLM922S-P01A. Ver.1.0
Product Brief Model: TLM922S-P01A Ver.1.0 1 Index 1. Overview... 3 2. Product Features... 3 3. Application... 4 4. Product Specifications... 4 5. PIN Definition... 6 6. PCB Dimension... 7 7. Pin Configuration...
LM931 Bluetooth low energy Module
Bluetooth low energy Module Revised 24/JAN/2017 2.50mm 1m 10.1 m m 22m Features Bluetooth v4.1 specification I2C and UART 14 ma (at 0 dbm) Current Consumption (Tx Mode) 9 digital and 3 analogue (10-bit
Bluetooth Low Energy Portfolio
Bluetooth Low Energy Portfolio February 2016 - Page 1 Price Smart Platform 3 Platforms based on BLE Combo Node Connectivity ISP0900 series Intelligent Node ISP1300 series ISP091201 ISP1500 series ISP130301
BLE WiFi Gateway. Model: G1. Version: V Contents. Contents Overview... 2
BLE WiFi Gateway Model: G1 Version: V1.3.2 Contents Contents... 1 1.Overview... 2 2.Features... 3 3.Typical Application... 3 4.Outside View... 4 5.Electronic Parameters... 5 Email: sales@minewtech.com
CC26xBxA Bluetooth Smart and IoT Module
CC26xBxA Bluetooth Smart and IoT Module Features Fully compliant to Bluetooth Low Energy 5.0 (CC264BxA / CC264BxA-S) and 4.2 / 4.1 / 4.0 specifications High efficiency on-module printed PCB RF antenna
BLUE RANGE USER GUIDE. Low Energy
BLUE RANGE USER GUIDE Low Energy 1/31 TABLE OF CONTENTS 1 GENERAL INFORMATION ABOUT BLUETOOTH LOW ENERGY... 3 2 BLUETOOTH LOW ENERGY REFERENCES... 3 3 BLUETOOTH LOW ENERGY PRODUCTS BY ELA INNOVATION...
Datasheet DFBM-NQ62X-DT0R. A Bluetooth Low Energy System On Chip Module. Proprietary Information and Specifications are Subject to Change
1 Datasheet DFBM-NQ62X-DT0R A Bluetooth Low Energy System On Chip Module. Preliminary Data Sheet Sheet 1 of 18 Aug. 16, 2016 Contents 1. Features... 3 1-1. General... 3 1-2. Bluetooth... 3 2. Model No.
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.2 BLE Datasheet and Quick Reference for USBLE232DEXA
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.2 BLE Datasheet and Quick Reference for USBLE232DEXA Package content: BLE RS-232 adapter x 1 User manual x 1 Mini USB Cable x 1 DB9 (male) Reset to
Use of ISP1880 Accelero-Magnetometer, Temperature and Barometer Sensor
Use of Accelero-Magnetometer, Temperature and Barometer Sensor Application Note AN181105 Introduction Scope This application note describes how to set up a Sensor demonstration with Sensors Board that
Product Brief. Model: TLM922S-P01A. Ver.1.4
Product Brief Model: TLM922S-P01A Ver.1.4 1 Index 1. Overview... 3 2. Product Features... 3 3. Application... 4 4. Product Specifications... 4 5. PIN Definition... 5 6. PCB Dimension... 6 7. Pin Configuration...
Product description for ED1600 generic Sigfox Module
Product description for ED1600 generic Sigfox Module The ED1600 Sigfox Module is mainly developed for container tracking purposes. To avoid the development of many different types of modules and just as
BANGLADESH UNIVERSITY OF ENGINEERING & TECHNOLOGY (BUET) DHAKA TECHNICAL SPECIFICATION FOR SUPPLY AND INSTALLATION OF LABORATORY EQUIPMENTS (PKG1).
BANGLADESH UNIVERSITY OF ENGINEERING & TECHNOLOGY (BUET) DHAKA TECHNICAL SPECIFICATION FOR SUPPLY AND INSTALLATION OF LABORATORY EQUIPMENTS (PKG1). Package number: G4 NO: HEQEP/CP-3137/Procurement/PacakageG4/26-08-2015/004
WAVETEK BLE-WT51822AA/AB. Revision History. Bluetooth low energy Module WT51822AA (256k) /AB (128k) (Bluetooth Low Energy BT4.0) PRODUCT SPECIFICATION
Bluetooth low energy Module WT51822AA (256k) /AB (128k) (Bluetooth Low Energy BT4.0) PRODUCT SPECIFICATION Part number: BLE WT51822AA/AB Wavetek has developed a module which supports Bluetooth Low Energy
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.2 BLE Datasheet and Quick Reference for USBLE232C
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.2 BLE Datasheet and Quick Reference for USBLE232C Package content: BLE RS-232 adapter x 1 Screws for DB9 connector x 2 Nuts for DB9 connector x 2 User
SST-2450 Wireless Modem User s Manual
SST-2450 Wireless Modem User s Manual Warranty All products manufactured by ICP DAS are warranted against defective materials for a period of one year from the date of delivery to the original purchaser.
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.1 BLE Datasheet and Quick Reference for BLE232V2
Serial Bluetooth Smart Adapter - RS232, Low Energy 4.1 BLE Datasheet and Quick Reference for BLE232V2 Package content: BLE RS-232 adapter x 1 Screws for DB9 connector x 2 Nuts for DB9 connector x 2 User
KCS TraceME TM-202 / R9C5 GPS / GPRS / SMS / RFID module, OEM Version
KCS TraceME TM-202 / R9C5 GPS / GPRS / SMS / RFID module, OEM Version The KCS GPRS/GPS range of modules enables you to remotely track & trace people, animals and a variety of objects, e.g. cars, trucks,
The Future of Lighting Is Smart. Martin Mueller Roger Sexton
The Future of Lighting Is Smart Martin Mueller Roger Sexton The Future of Lighting Is Smart What is Smart Lighting and how do we get there? Communication methods DALI BLE Communication: lighting services
Use of ISP1507-AL Evaluation Boards
Use of ISP1507-AL Evaluation Boards Application Note AN181103 Introduction Scope This document gives details on hardware and software for using and testing Insight SiP Bluetooth Low Energy module ISP1507-AL,
BT121 Bluetooth Smart Ready Module. July 2016
BT121 Bluetooth Smart Ready Module July 2016 TOPICS Bluetooth Smart vs. Smart Ready Bluetooth Smart Ready Use Cases BT121 Key Features BT121 Benefits BT121 Overview Bluetooth Smart Ready Software Development
5.1 Configure each Sensor Pin Rename Set Rules Export Data Switching Nodes... 25
Hi-Gate User Manual Hi-Gate User Manual Hi-Gate User Manual Contents 1 Introduction... 3 1.1 Hi-Gate... 3 1.1.1 What is Hi-Gate... 3 1.1.2 Specifications... 3 1.1.3 Features... 4 1.2 Hi-Node... 5 1.2.1
Wireless Sensor Networks BLUETOOTH LOW ENERGY. Flavia Martelli
Wireless Sensor Networks BLUETOOTH LOW ENERGY Flavia Martelli flavia.martelli@unibo.it Outline Introduction Applications Architecture Topology Controller specifications: Physical Layer Link Layer Host
BLUE bean. Data sheet
Data sheet is a high performance and ultra low power surface mount USB radio combining single-stream 11ac Wave2 Wi-Fi and Bluetooth 5.0 in a very small form factor is IEEE 802.11b/g/n/a/ac Wave2 dual-band
BT121 Bluetooth Smart Ready Module. May 2015
BT121 Bluetooth Smart Ready Module May 2015 TOPICS Bluetooth Smart vs. Smart Ready Bluetooth Smart Ready Use Cases BT121 Key Features BT121 Benefits BT121 Overview Bluetooth Smart Ready Software Development
BLE121LR Bluetooth Smart Long Range Module 5/12/2014 1
BLE121LR Bluetooth Smart Long Range Module 5/12/2014 1 Table of Contents Key Features Benefits BLE121LR Overview Bluetooth Smart Software Certifications Development Tools Use Cases 5/12/2014 2 Key Features
RN-174. WiSnap M2 Super Module. Features. Description. Applications. ~ page 1 ~ rn-174-ds v1.1 6/1/2011
WiSnap M2 Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (RN-174-C), PCB Trace antenna (RN-174-P), wire antenna (RN- 174-W) and
Scannex rt.buffer Overview
Scannex rt.buffer Overview Operation The Scannex rt.buffer is a rugged, low power 3G (UMTS/HSPA+) remote telemetry unit providing a flexible solution in marine and harsh environmental conditions, with
PAN1740 Design Guide
1 of 14 PAN1740 2 of 14 TABLE OF CONTENTS 1. Scope of this Document... 3 2. Key benefits when using PAN1740... 3 3. Bluetooth Low Energy... 3 4. Description PAN1740... 4 5. Block Diagram PAN1740 Module...
Typical Applications: GHz Bluetooth low energy systems - Proprietary 2.4 GHz systems - Sports and leisure equipment - Mobile phone accessories,
PTR5618 Coin-size Ultra Low Power Bluetooth Low Energy System on Module Embedded Cortex M4F 32 bit processor The PTR5618 ultra-low power Bluetooth Low Energy/ANT/2.4GHz Proprietary Multi-protocol modules
RN-174. WiFly GSX Super Module. Features. Description. Applications. rn-174-ds v1.1 3/3/2011
www.rovingnetworks.com rn-174-ds v1.1 3/3/2011 WiFly GSX Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (-C), PCB Trace antenna
AT200V3 Vehicle Tracking Device. Version 3.x Hardware. User Guide
AT200V3 Vehicle Tracking Device Version 3.x Hardware User Guide Document Version: 2.0 Device Hardware Version: 3.0+ Date: July 2017 1 Abbreviations ADC ASCII BLE BT CAN DC FET GIS GPRS GPS GSM IP LED MEMS
AC-920 IEEE ac 5GHz mini PCIe Module. Key Features. AC-920 at a Glance. AC-920 Data Sheet. AirRunner WiFi Series. IEEE 802.
AC-920 IEEE 802.11ac 5GHz mini PCIe Module Featuring the latest IEEE 802.11ac technology and PCIe interface design, the AC-920 embedded module provides up to 80MHz of bandwidth allowing for data rates
BLE010V5 1. (Based on CSR1010) Bluetooth Modules. User s Manual V1.5
BLE010V5 (Based on CSR1010) Bluetooth Modules User s Manual V1.5 BLE010V5 1 TABLE OF CONTENTS 1 Introduction and Block Diagram... 3 1.1 General Introduction... 3 1.2 Block Diagram... 3 2 Main Features
DATASHEET. Wirnet Station 868. LoRaWAN gateway for smart IoT chain
Wirnet Station 868 LoRaWAN gateway for smart IoT chain 868 MHz ISM band LongRange bidirectional communications capabilities Embedded, remote and open low power communication station Open development framework
BLE MODULE SPECIFICATIONS
WIRELESS-TAG BLE MODULE SPECIFICATIONS nrf51-01/02/dk Bluetooth Low Energy (BLE) module of nrf51-01/02 is the next generation BLE module released by SEMITRION electronics. The modules use nrf51822 from
Wireless Low Temperature Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Low Temperature Sensor RTD LOW TEMPERATURE General Description The RF Wireless Low Temperature Sensor uses a glass coated platinum RTD sensor
LoRaWAN Pressure / Depth and Temperature Sensor
LoRaWAN Pressure / Depth and Temperature Sensor Piezoresistive pressure measurement Features LoRaWAN -enabled piezoresistive pressure sensor / depth gauge. Range: 0 to 1 bar (0 to 10 m); resolution: 0.000030
C300RU. Version Mbps 11n Wireless USB adapter. Technical Specification Sheet
C300RU Version 2.0 300Mbps 11n Wireless USB adapter Technical Specification Sheet Page 1 of 6 1. Product s Compatible with IEEE 802.11n high rate draft standard to provide wireless downlink 300Mbps and
Wireless High Temperature Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless High Temperature Sensor RTD HIGH TEMPERATURE General Description The RF Wireless High Temperature Sensor uses a glass coated platinum RTD sensor
BLE010V2 1. (Based on CSR1010) Bluetooth Modules. User s Manual V2.7
BLE010V2 (Based on CSR1010) Bluetooth Modules User s Manual V2.7 BLE010V2 1 TABLE OF CONTENTS 1 Introduction and Block Diagram... 3 1.1 General Introduction... 3 1.2 Block Diagram... 3 2 Main Features
The IoT and Thread in PHYTEC Nodes. Jonas Remmert July 15th, 2016
The IoT and Thread in PHYTEC Nodes Jonas Remmert July 15th, 2016 Company Introduction PHYTEC Hardware Manufacturer headquartered in Mainz, Germany more than 200 employees worldwide Hardware Single Board
LM1010 Long Range Bluetooth v4.0 Dual Mode Adapter Host Controller Interface (HCI) via USB Interface
Long Range Bluetooth v4.0 Dual Mode Adapter Revised 11/JAN/2018 Datasheet Version XP OSX Vista 7 8 1.0 10 90 Pivotting Angle Antenna 90 Features Bluetooth v4.0 (Backwards compatible with Bluetooth v2.0,
LoRaWAN Pressure / Level and Temperature Sensor
LoRaWAN Pressure / Level and Temperature Sensor Piezoresistive pressure sensor with G 1/4 connection Features LoRaWAN -enabled piezoresistive pressure sensor / level gauge. Range: -1 to 10 bar (up to 100
RN-174. WiFly GSX Super Module. Features. Description. Applications. rn-174-ds v1.1 4/20/2011
www.rovingnetworks.com rn-174-ds v1.1 4/20/2011 WiFly GSX Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (-C), PCB Trace antenna
DLT 300, DLR 360 Digi-Wave 300 Series Digital Transceiver and Receiver
DIGITAL SPECIFICATION DATA Tour Guide Simultaneous Interpretation Portable Conference Wireless Intercom Team Teaching Hearing Assistance Personal Listening Portable Discussion Portable Presentation DLT
Wireless-Tag WT51822-S1
Wireless-Tag WT51822-S1 Bluetooth Low Energy 4.1 Module DATASHEET Description Bluetooth Low Energy (BLE) module of WT51822-S1 is the next generation BLE4.1(Compatible With BLE4.0) module released by Wireless-Tag
WE CONNECT REAL WORLD STRUCTURAL MONITORING SMART SENSORS SOFTWARE CLOUD WIRELESS INTERFACE TO THE
WE CONNECT REAL WORLD TO THE STRUCTURAL MONITORING SENSORS WIRELESS INTERFACE SOFTWARE CLOUD Rev.10 del 3/10/017 Redatto da: R&D e MKT Approvato da: CEO Smart structural WIRELESS Interface NI00 devices
Product Catalog. Belgium Tel.: +32 (0) The Netherlands Tel.: +31 (0)
Product Catalog Table of Contents NGR-30 Gateway ZEM-61 Wireless 3-Phase Electricity Monitor ZEM-30 Wireless Single Phase Electricity Monitor TES-11 / HTS-10 Wireless Temperature / Humidity Sensor TES-21
T5a, T5b & T5c Temperature Tags
T5a, T5b & T5c Temperature Tags Wi-Fi based solutions for temperature monitoring Remotely collect, record, and analyse condition, location, and status information in real time Offline condition monitoring
Wireless Open / Closed Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Open / Closed Sensor OPEN / CLOSED General Description The Wireless Open / Closed Sensor can be used to detect when a door or window is opened
BT2540 Bluetooth 4.0 BLE (CC2540) Module Users Manual
BT2540 Bluetooth 4.0 BLE (CC2540) Module Users Manual Revision 1.0 Online download: This manual: /images/manual/bluetooth/bt2540manual.pdf Software: http:///images/manual/bluetooth/cdrom-bt2540.rar 2012.08.31.
RMS Mini Wireless Data Logger
2018 ROTRONIC AG Bassersdorf Switzerland Table of Contents 1 Overview... 3 1.1 RMS System Overview... 3 1.2 Device Overview... 4 1.3 RMS Mini Data Logger... 5 1.4 Power Supply... 5 1.5 Measured Parameters...
Wireless Open / Closed Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Open / Closed Sensor General Description The Wireless Open / Closed Sensor can be used to detect when a door or window is opened and closed
ALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI
ALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI FEATURES Ready-to-use Bluetooth Low Energy HCI module Ultra Small form factor 12mm x 12mm Ultra Low Power consumption EM Microelectronic Bluetooth Low
Wireless Asset Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Asset Sensor ASSET General Description The Wireless Asset Sensor can be attached to an asset and alert you if the asset is removed from range
EMB1061-E. Datasheet. Abstract. BLE module. Vision:1.0 Date: Number: DS0080EN. Features. Module Type. Based on an ultra-low power BLE SOC
Datasheet BLE module Vision:1.0 Date:2017-07-04 Number: DS0080EN Abstract Features Based on an ultra-low power BLE SOC ARM Cortex-M0 Core 32MHz Module Type Type -P PCB antenna Note 24KB RAM 160KB Flash
RN-174 WiFly Super Module
RN- WiFly Super Module Features Evaluation board for the RN- module Supports chip antenna (RN--C), PCB trace antenna (RN--P), wire antenna (RN--W), and U.FL connector for an external antenna (RN--U) Ultra-low
w w w. z i g s e n s e. c o m. a u
ZigSense is a line of low power wireless sensors utilizing ZigBee mesh network technology as its core communication channel. ZigSense systems contain a self healing network of wireless sensors designed
A-307. Mobile Data Terminal. Android OS Platform Datasheet
A-307 Mobile Data Terminal Android OS Platform Datasheet Revision 1.2 March, 2014 A-307 Platform Overview A-307 Platform Overview The A-307 provides Original Equipment Manufacturers (OEMs) and Telematics
KCS TraceME TM-178 / R9H4 GPS / GPRS / SMS / RFID module, OEM Version
KCS TraceME TM-178 / R9H4 GPS / GPRS / SMS / RFID module, OEM Version The KCS GPRS/GPS range of modules enables you to remotely track & trace people, animals and a variety of objects, e.g. cars, trucks,
See instructions to download and install the latest version of LinkBoxEIB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
BLE (Based on CSR1011) Bluetooth Module. User s Manual V1.3
BLE011 (Based on CSR1011) Bluetooth Module User s Manual V1.3 BLE011 1 TABLE OF CONTENTS 1 Introduction and Block Diagram... 3 1.1 General Introduction... 3 1.2 Block Diagram... 3 2 Main Features and Application...
IOT Gateway 4G Connectivity
www.beanair.com Product Video VIDE O Main Features IOT Gateway with 4G connectivity compatible with Wilow sensors 4G Connectivity CAT4 up to 150 Mbps 4G Antenna (2x2 MIMO) WIFI connectivity (IEEE 802.11
Lighting Controls and Connectivity basicdim. basicdim Wireless Passive Module Wireless module for basicdim
Wireless Passive Module Wireless module for Product description Wireless controllable with a Android / ios smart device No need for an external gateway device Forms automatically a wireless communication
Healthy Home Sensor. Reference Manual TBHV TBHV
Healthy Home Sensor Reference Manual TBHV100-915 TBHV100-868 Table of Contents 1. Description...1 2. Specifications...2 2.1 Mechanical...2 2.1.1 Sensor... 2 3. Operation...3 3.1 Power On Reset...3 3.2
Product Datasheet: DWM1001-DEV DWM1001 Module Development Board. Key Features and Benefits
Product Datasheet: DWM1001-DEV DWM1001 Module Development Board Plug-and-Play Development Board for evaluating the performance of the Decawave DWM1001 module Easily assemble a fully wireless RTLS system,
IP68. Autarkic Data Loggers - MT-051 / MT-713 / MT-723
Autarkic Data Loggers - MT-051 / MT-713 / MT-723 Use in the most demanding environments These data loggers are designed for use in difficult to reach and widely distributed locations. In places where neither
RN-174. WiFly GSX Super Module. Features. Description. Applications. rn-174-ds v1.1 1/24/2011
www.rovingnetworks.com rn-174-ds v1.1 1/24/2011 WiFly GSX Super Module Features Development board containing the RN-171 module, status LEDs, power regulator Supports chip antenna (-C), PCB Trace antenna
Smart Harness. Group #15 Members MATTHEW HORTON - EE HAI NGUYEN - CPE DOMINIC VU - CPE
Smart Harness Group #15 Members MATTHEW HORTON - EE HAI NGUYEN - CPE DOMINIC VU - CPE Project Description Harness that is designed for dogs The harness will be mounted with an electronic device Device
Typical Applications: GHz Bluetooth low energy systems - Proprietary 2.4 GHz systems - Sports and leisure equipment - Mobile phone accessories -
PTR5618PA Coin-size Bluetooth Low Energy System on Module with PA Embedded Cortex M4F 32 bit processor The PTR5618PA ultra-low power Bluetooth Low Energy/2.4GHz Proprietary Multi-protocol modules based
SmartBond DA Smallest, lowest power and most integrated Bluetooth 5 SoC. Applications DA14585
SmartBond DA14585 Smallest, lowest power and most integrated Bluetooth 5 SoC Connected devices are constantly evolving. New generations appear that are smarter, more full featured and have longer battery
Wireless Activity Sensors
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Activity Sensors ACTIVITY DETECTION General Description Monnit wireless activity sensors can be used in a host of applications where detecting
VDC. Wireless VDC Voltage Meters. The Leader in Low-Cost, Remote Monitoring Solutions. Monnit Sensor Core Specifications. General Description
The Leader in Low-Cost, Remote Monitoring Solutions Wireless 0-1.2 VDC Voltage Meters 0-1.2 VDC 0-1.2 VOLT METER General Description The Wireless Voltage Meter can interface with other devices to measure
DATA SHEET. XIS: Xicato Intelligent Sensors XIS
XIS DATA SHEET XIS: Xicato Intelligent Sensors Figure : XIS0-D5MLTH-B integrated sensor Figure 2: XIS00-D5MLTHY-B Integrated sensor, showing connectors for remote sensor elements Figure 3: XIS-M4 remote
ČVUT FEL v Praze, U-BLOX IOT MODULES
ČVUT FEL v Praze, 13.04.2018 U-BLOX IOT MODULES 2 Mariusz Ciesielski Line Manager Mariusz.Ciesielski@microdis.net Microdis Electronics, Sp. z o.o. Strzelińska 17, Żerniki Wrocławskie, Poland 3 NINA Bluetooth
See instructions to download and install the latest version of LinkBoxEIB and the user's manual at
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
Use of ISP1807-LR Evaluation Boards
Use of ISP1807-LR Evaluation Boards Application Note AN181104 Introduction Scope This document gives details on hardware and software for using and testing Insight SiP Bluetooth Low Energy module ISP1807-LR,
Agriculture. ALTA Wireless IoT Sensors Kit. Kit Data Sheet. Things are talking. The only 1000 / 10-yr. IoT Sensors Platform in the World
ALTA IoT Sensors Kit Agriculture Kit Data Sheet Things are talking. ALTA Remote Monitoring Systems enable things to speak. sensors, gateways and software give a voice to the IoT (Internet of Things) and
RN-134. WiFly GSX Super Module SuRF Board. Features. Description. Applications. ~ page 1 ~ rn-134-ds v1.
WiFly GSX Super Module SuRF Board Features UART interface with RS232 and TTL signaling Through hole board simplifies system integration Accepts 3-12VDC Status LEDs to show network status and data transfer
Interface Manual Chemical Injection System
1 Interface Manual Chemical Injection System SignalFire Numbers: CIJ-xLine (Local Modbus control) CIJ-xLine-Wireless (SignalFire radio) SignalFire Chemical Injection Controller Module The SignalFire Chemical
Wireless Button Press Sensor
The Leader in Low-Cost, Remote Monitoring Solutions Wireless Button Press Sensor BUTTON General Description The Wireless Button Press Sensor detects when the button has been pressed triggering a notification
mini CRD OMNIA _ MINI OMNIALOG READOUT UNITS AND DATALOGGERS
CRD _ MINI LOG READOUT UNITS AND DATALOGGERS MINI _EN_07_02/2018 MINI LOG Mini log is a four-channel logger that can be factory-configured to read specific types of sensors: it reads analog (current, voltage,
Industrial Manufacturing
ALTA Wireless IoT Sensors Kit Manufacturing Kit Data Sheet Things are talking. ALTA Remote Monitoring Systems enable things to speak. Wireless sensors, gateways and software give a voice to the IoT (Internet
IQ21x Series Controllers
IQ1x Series Controllers IQ1x SERIES CONTROLLERS Description Features The IQ1x series of intelligent controllers are designed for use as unitary controllers in building control systems. Full compatibility
SPECIFICATION. Part No. : MA741.A.BI.001. Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO
SPECIFICATION Part No. : MA741.A.BI.001 Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO Feature : 2 x LTE Cellular (4G/3G/2G) Antennas (MIMO) Works
Safety Instructions WARNING Follow carefully this safety and installation instructions. Improper work may lead to serious harmful for your health and also may damage seriously the IntesisBox and/or any
mini CRD OMNIA _ MINI OMNIALOG READOUT UNITS AND DATALOGGERS
CRD _ MINI LOG READOUT UNITS AND DATALOGGERS MINI _EN_06_06/2016 mini log Mini log is a four-channel logger that can be factory-configured to read specific types of sensors: it reads analog (current, voltage,