UndercoverEye QTI-Raptor Product Data Sheet

Transcription

1 PixController, Inc. UndercoverEye Raptor Qual-Tron, Inc. Ground Sensor Version UndercoverEye QTI-Raptor Product Data Sheet GSM/GRPS Cellular Transmission JPEG Photo Notification Within 30 Seconds Attach Standard NTSC/PAL Video Cameras Triggered by Qual- Tron, Inc. Ground Sensors Includes MPEG4 DVR video recorder Built-in GPS receiver (Optional) Powered by 8 D-Cell Batteries External Battery/Charging PixController, Inc Corporate Lane Export, PA Phone: Fax: sales@pixcontroller.com Introduction The UndercoverEye QTI-Raptor surveillance camera system is an unattended camera specifically designed for covert operations needing real-time photo notification. Upon motion detection the UndercoverEye QTI-Raptor system will send you a photo via GSM/GPRS cellular transmission within 30 seconds of the trigger event leaving time to apprehend the suspect onsite. The UndercoverEye QTI-Raptor system contains all of the features of the UndercoverEye Raptor system with the addition of a Qual-Tron, Inc. RF trigger which enables the system to use any of the Qual-Tron, Inc. ground sensors. System sends to multiple address/cell phones and includes a text message with your photo such as a GPS position (optional) and location information and system battery level. System includes a built-in Mini-DVR recorder to record full motion video in MPEG4 format to an included SD media card. Connect any standard 12V video camera. Includes external charging port for external batteries or solar charging for long-term field deployment.

2 Product Specifications Case Pelican 1150 weather proof case Size: 9-1/4"L x 7-3/4"W x 4-1/2"D Unit Weight: 8 lbs Data Transmission Radio Options GSM/GPRS Quad Band EDGE 850/900/1800/1900 MHz CDMA Dual Band 800/1900 MHz WiFi - IEEE B/G 2.4 GHz Data Transmission Features Data Capabilities: 1x/QNC/HSPD Embedded TCP/IP and UDP/IP protocol stack Embedded FTP SMTP SSL - Secure Connection MO / MT Text and PDU modes System Power (8) D-Cell Alkaline Batteries 12V External Power 1A Max - 300mA Typical transmission current 4mA 11mA Sleep Current Field Operation ~3 Months Camera Connections 12V NTSC/PAL Video Analog Cameras Includes LUX CMOS Color/IR Bullet Camera with 3.6mm Lens RF Wireless Sensors Compatible with Qual-Tron, Inc. MIDS, MMIDS, and EMIDS Systems Embedded DVR NTSC/PAL Video Input D1 (704 x 480), CIF (320 x 30 FPS MPEG4 Video Format JPEG Digital Photo Format 5 FPS to 30 FPS Video Recording External Connectors SMA GSM Antenna (900MHZ) 2-Pin Mil-Spec External Battery 3-Pin Mil-Spec Camera TNC 50 OHM RF Antenna Sensor SIM GSM Subscriber Identity Module Standard 6 pin SIM Socket Software Configuration Features Sensor or Time-Lapse Event Mode SMTP and FTP Server WiFi Setup SSID, Network Security, Time Synchronization Cellular APN Server Schedule Mode Setup Address/Cellular Phone up to 10 addresses Subject Setting Sender Address Format Plain Text or HTML Text Description Trigger Formats Attach Image, Text Only, or None Camera Resolution Setting DVR Frame Rate 1-30 fps DVR Format CIF or D1 COTA Configure update Over The Air: Update Raptor Configuration, Photo/GPS ondemand, Remote Peripheral Device Control User Interface 2 X 16 LCD Display (6) Status LED s 5 Button Menu Key GPS 50-channel u-blox 5 engine -160dBm SuperSense acquisition 4 Hz position update rate <1 second Time To First Fix for Hot and Aided Starts GPS Features GPS Position, Bing Aerial Map, Google Aerial Map Status LED s MCU Stat Cellular Power Reverse Battery On-Board Storage USB Flash Drive 2GB Max, FAT Format SD DVR Storage 32GB Max

3 Product Components Exterior Components (Figure 1) The small-sized recording box contains a Mini DVR recording full motion video to a SD card which can be buried into the ground for ultimate covert surveillance. The external components include the following: Qual-Tron, Inc. Sensor/Transmitter Qual-Tron Sensor Antenna GSM/GPRS Cellular Antenna 3-Pin Mil-Spec Camera & Cable. Cable includes BNC and 2.1mm 12V Camera Connector 2-Pin Mil-Spec External Battery System Case Figure 1. Panel Components (Figure 2) The electronics panel has the following features: Four thumb screws to remove the cover plate DB-9 RS-232 Programming Status LED s 16 X 2 LCD Display (5) Key Menu Navigation Video Out port Main Power Switch (8) Alkaline D-Cell battery supply Figure 2.

4 Panel Plate Removal (Figure 3) Remove the (4) thumb screws and remove the panel plate to access the following items: Cellular SIM Card USB Flash Drive 12V Fuse Figure 3. External s (Figure 4) SMA Cellular Antenna Mil-Spec 2-pin External Battery Mil-Spec Camera TNC QTI Sensor Antenna Figure 4. Figure 5.

5 Battery Removal (Figure 6) To remove the 8 D-Cell Battery pack simply lift the battery pack from the case as shown in Figure 6. By removing the battery pack you can access the SD media card which will contain JPEG still photos and video movie files. Figure 6. Figure 7.

6 PC Setup/Control Software GENERAL SETUP SETTINGS CAMERA SETUP SCHEDULER SETTINGS SMTP/FTP SETTINGS CELLULAR APN SETTINGS

7 WI-FI SETUP COTA SETUP