Digital hygrometers. FUNction

Transcription

1 Digital hygrometers DB-GMD FUNction Visualization of the relative humidity when the unit is connected to a humidity transmitter with current output (2 or 3 wires). The unit can supply directly the transmitters that can operate with voltage from 13.5 Vdc to 25 Vdc (not regulated). Control of optical alarms (flashing display and visualization of error code) when the sensor is opened or short circuited. Type range Main supply Resolution input db-gmd/ % 230 Vac 0.5% db-gmd/ % 12 Vac 0.5% Power supply: 230 Vac, 12 Vac, 50/60 Hz Output Vdc: DB-GMD/ Vdc DB-GMD/ Vdc Input resistance: 51 Ohm Measuring range: % Visualization: 3 digit display 0.5 % Protection: hole for 71 x 29 mm 160 g 66

2 Igrostati digitali DB-IGD Relative humidity visualization and regulation, if the unit is connected to a humidity transmitter with current output (2 or 3 wires) with: - 1 relay output for humidification and dehumidification system control; - direct supply for the transmitters that can operate with voltage from 12 to 24 Vdc (not regulated); - setting of a delay for successive load activations to avoid the load to be powered too many times; - setting of the reponse sensibility related to the humidity variations (fast or slow); - control of optical and acoustic alarms (flashed display, visualization of error code and buzzer). Type range main supply output Differential resolution db-igd/ % 230 Vac 8 A/250 Vac % 0.5% db-igd/ % 12 Vac 8 A/12 Vac % 0.5% Input : Power supply: 230 Vac, 12 Vac, 50/60 Hz Output Vdc: DB-IGD/ Vdc DB-IGD/12 12 Vdc Input resistance: 51 Ohm Campo di misura: % Setpoint: % Output : 1 SPDT relay (see schedule) Visualization: 3 digit display, indicator of output state (led) 0.5 % Working: hole for 71 x 29 mm Protection: Peso: 180 g 69

3 Digital thermometers DB-TMD Visualization of the temperature measured with NTC sensors in industrial heating and cooling applications. Control of optical alarms (flashing display and visualization of error code) if the sensor is opened or short circuided. TYPE range Power supply Resolution input db-tmd/ Vac 0.1 ntc 10K db-tmd/ Vac 0.1 ntc 10K db-tmd/ Vac/dc 0.1 ntc 10K Power supply: 230 Vac, 24 Vac, 12 Vac/dc, 50/60 Hz NTC 10K (10 kohm at 25 ) Measuring range: (NTC) Visualization: 3 digit display 0.1 between -9.5 to 99.5 and 1 on the remaining range protection: hole for 71 x 29 mm 160 g 65

4 Digital thermoregulators DB-TRD Temperature visualization and regulation measured with NTC sensors in industrial heating and cooling applications with: - 1 relay output; - setting of a delay for successive load activations to avoid the load to be powered too many times - setting of the reponse sensibility related to the temperature variations (fast or slow); - control of optical and acoustic alarms (flashing display, visualization of error code and buzzer). type RANGE MAIN SUPPLY OUTPUT DIFFERENTIAL K RESOLUTION INPUT db-trd/ Vac 8 A/250 Vac ntc 10K db-trd/ Vac 8 A/12-24 Vac ntc 10K db-trd/ Vac/dc 8 A/12 Vac ntc 10K : Power supply: 230 Vac, 24 Vac, 12 Vac/dc, 50/60 Hz NTC 10K (10 KOhm at 25 ) Measuring range: (NTC) Setpoint: Output: 1 SPDT relay (see schedule) Visualization: 3 digit display, indicator of output state (led) 0.1 between -9.9 to 99.9 and 1 on the remaining range Protection: hole for 71 x 29 mm 180 g 68

5 Digital manometers DB-PMD Visualization of the pressure, if the unit is connected to a pressure transmitter with current output (2 or 3 wires). The unit can supply directly the transmitters that can operate with voltage 17 Vdc ± 20% (non regulated). Control of optical alarms (flashing display and visualization of error code) when the sensor is opened or short circuited. TYPE range Power supply resolution input db-pmd/ (*) 230 Vac 0.1 or db-pmd/ (*) 12 Vac/dc 0.1 or (*) range must be defined during ordering. The range must be within -99 and on request the controller can be supplied with mbar, bar or psi. Power supply: 230 Vac, 12 Vac/dc, 50/60 Hz DB-PMD/ Vdc DB-PMD/ Vdc Input resistance: 100 Ohm Measuring range: see (*) Power cons.: < 1.5 W Visualization: 3 digit display 0.1 for scales with decimal point (upper scale lower or equal to 100) 1 for scales without decimal point Protection: hole for 71 x 29 mm 160 g 20,5 Vdc 67

6 Digital pressostats DB-PRD Pressure visualization and regulation, if the unit is connected to a pressure transmitter with current output (2 or 3 wires) with: - 1 relay output for increasing or decreasing pressure system control; - direct supply for the transmitters that can operate with voltage from 11 to 20.5 Vdc (not regulated); - setting of a delay for successive load activations to avoid the load to be powered too many times; - setting of the reponse sensibility related to the pressure variations (6 different speeds); - control of optical and acoustic alarms (flashed display, visualization of error code and buzzer). TYPE RANGE MAIN SUPPLY OUTPUt Differential Resolution input db-prd/ (*) 230 Vac 8 A/250 Vac o db-prd/ (*) 12 Vac/dc 8 A/12 Vac o (*) range must be defined during ordering. The range must be within -99 and on request the controller can be supplied with mbar, bar or psi. Power supply: Input resistance: Power cons.: Output: Visualization: 230 Vac, 12 Vac/dc, 50/60 Hz 100 Ohm < 1.5 W 1 SPDT relay (see schedule) 3 digit display, indicator of output state (led) 0.1 for scales with decimal point (upper scale lower or equal to 100); 1 for scales without decimal point Working: <95% Housing: ABS self-estinguishing as to UL94 V-0 protection: Dimensioni: hole for 71 x 29 mm 180 g 70