D300 Professional Desktop 3D Printer

Transcription

1 D300 Professional Desktop 3D Printer - Multiple hotend options - Advanced software - Enclosed chamber - Built to order AUTOMATION READY Automatic calibration Multiple hotend options Controlled chamber Compressed air part Air filtration & circulation Hotend liquid EXTRUSION SYSTEM Multiple hotend options All-metal hotend and feeder Extrusion temperature up to 475 C Included nozzle: 0.4 mm BUILD CHAMBER Enclosed, controled chamber Build volume: 0300 mm x 300 mm Round glass printbed Printbed heating up to 120 C SOFTWARE Device control and management

2 D300 Professional Desktop 3D Printer Printer Technology: Fused Filament Fabrication (FFF) Build volume (d x h): 0300 mm x 300 mm, cylindric Motion system: precision linear guideways Maximum printhead travel speed: 250 mm/s XYZ accuracy: 6, 6, 5 micron Ultimate layer resolution: 50 micron Electronics: 32-bit Firmware: open-source Repetier-Firmware Remote monitoring: built-in HD camera Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi Automation ready: yes (software interfaces) Chamber Build chamber: enclosed Build chamber door: tempered glass Build chamber illumination: yes Build chamber temperature: up to 80 C Build plate Type: glass plate Temperature up to 120 C Heatup time: 5 min Power requirements Installed power: 2500 W Regulatory compliance CE, WEEE Safety Air filtering: air & active carbon filters Door safety switch: yes Overheating protection: yes Printer size Dimensions (w x d x h): 600 mm x 617 mm x 935 mm Ambient conditions Operating ambient temperature: C, % RH Software Supplied software: Slic3r (slicer) FabControl (printing, drying profile management software) FabControl Embedded (device control software) Supported 3D models file format :.stl,.obj,.3mf Supported print file format:.gcode (up to 150MB) AVAILABLE EXTRUSION SYSTEMS for D300 Pro Bowden 1.75 Pro Direct 1.75 HT Bowden Dual 1.75 HT Direct 1.75 Single Nozzle Bowden Dual Nozzle Bowden sales@massportal.com MassPortal.com For more information on hotends, please see hotend specification sheets or contact a sales representative Document version:

3 D600 Production 3D Printer - Multiple hotend options - Advanced software - Integrated filament dryers - Enclosed chamber - Built to order AUTOMATION READY Automatic calibration Multiple hotend options Controlled chamber Compressed air part Integrated dual filament dryers Hotend liquid EXTRUSION SYSTEM Multiple hotend options All-metal hotend and feeder Extrusion temperature up to 475 C Included nozzle: 0.4 mm BUILD CHAMBER Enclosed,controlled chamber Build volume: 0400 mm x 580 mm Round glass printbed Printbed heating up to 120 C SOFTWARE Device control and management

4 D600 Production 3D Printer Printer Technology: Fused Filament Fabrication (FFF) Build volume (d x h): 0400 mm x 580 mm, cylindric Motion system: precision linear guideways Maximum printhead travel speed: 250 mm/s XYZ accuracy: 6, 6, 5 micron Ultimate layer resolution: 50 micron Electronics: 32-bit Firmware: open-source Repetier-Firmware Remote monitoring: built-in HD camera Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi Automation ready: yes (software interfaces) Chamber Build chamber: enclosed Build chamber door: tempered glass Build chamber illumination: yes Build chamber temperature: up to 80 C Build plate Type: glass plate Temperature up to 120 C Heatup time: 5 min Filament dryers Compatibility: "open material" spools up to 1 kg Spool size (diameter x width): 200 mm x 80 mm Power requirements Installed power: 3000 W Regulatory compliance CE, WEEE Safety Air filtering: air & active carbon filters Door safety switch: yes Overheating protection: yes Printer size Dimensions (w x d x h): 710 mm x 730 mm x 1810 mm Ambient conditions Operating ambient temperature: C, % RH Software Supplied software: Slic3r (slicer) FabControl (printing, drying profile management software) FabControl Embedded (device control software) Supported 3D models file format :.stl,.obj,.3mf Supported print file format:.gcode (up to 150MB) AVAILABLE EXTRUSION SYSTEMS for D600 Pro Bowden 1.75 Pro Direct 1.75 HT Bowden Dual 1.75 HT Direct 1.75 Single Nozzle Bowden Dual Nozzle Bowden sales@massportal.com MassPortal.com For more information on hotends, please see hotend specification sheets or contact a sales representative Document version:

5 D1200 Large Format Production 3D Printer - Large build volume - Multiple hotend options - Advanced software - Enclosed chamber - Built to order AUTOMATION READY Multiple hotend options Large build volume Air filtration & circulation Compressed air part Built-in camera Hotend liquid EXTRUSION SYSTEM Multiple hotend options All-metal hotend and feeder Extrusion temperature up to 475 C Included nozzle: 0.8 mm BUILD CHAMBER Enclosed,controlled chamber Build volume: 0600 mm x 1000 mm Round glass printbed Printbed heating up to 120 C SOFTWARE Device control and management

6 D1200 Large Format Production 3D Printer Printer Technology: Fused Filament Fabrication (FFF) Build volume (d x h): 0600 mm x 1000 mm or 0350 mm x 1200 mm, cylindric Motion system: precision linear guideways Maximum printhead travel speed: 250 mm/s XYZ accuracy: 6, 6, 5 micron Ultimate layer resolution: 50 micron Electronics: 32-bit Firmware: open-source Repetier-Firmware Remote monitoring: built-in HD camera Connectivity: USB 2.0 and Ethernet jacks, Wi-Fi Automation ready: yes (software interfaces) Chamber Build chamber: enclosed Build chamber door: tempered glass Build chamber illumination: yes Build plate Type: glass plate Temperature up to 120 C Heatup time: 5 min Power requirements Installed power: 1500 W Regulatory compliance CE, WEEE Safety Air filtering: air & active carbon filters Door safety switch: yes Overheating protection: yes Printer size Dimensions (w x d x h): 880 mm x 844 mm x 2100 mm Ambient conditions Operating ambient temperature: C, % RH Software Supplied software: Slic3r (slicer) FabControl (printing, drying profile management software) FabControl Embedded (device control software) Supported 3D models file format :.stl,.obj,.3mf Supported print file format:.gcode (up to 150MB) AVAILABLE EXTRUSION SYSTEMS for D1200 Pro Direct 1.75 HT Direct sales@massportal.com MassPortal.com For more information on hotends, please see hotend specification sheets or contact a sales representative Document version: