Options. Call Toll Free: (800) Model #MW LCD monitor well

Transcription

1 Model #MW LCD monitor well Model # RELM Recessed LCD monitor mount (Monitor must be in house during production.) Model # LCDMNT Adjustable LCD monitor mount Model # EAMNT Extension arm LCD monitor mount NOTE: Mounts for CRT Monitors also available. Call for details. Model # SVM Swivel LCD monitor mount with lock Model # DCD Document camera drawer with lock Model # DCDLFT Manual document camera lift Model # PSLF Pullout document camera shelf Model # FDCS Folding document camera shelf Model # WSFDS Folding document camera shelf with wooden support brace

2 Model # LPTFDS Folding laptop shelf Model # REFDS Recessed folding document camera shelf Model # KD Keyboard drawer with lock Model # PSD Pullout storage drawer with lock Model # EHD Euro-hinged doors with lock Model # PPD Pocket-pivot doors with lock Model # PLDR Acrylic insert doors with lock Model # WT Wood trim, specify finish (Presenter Series lecterns only.) Model # DWT Deluxe wood trim, specify finish (Presenter Series lecterns only.) Model # RVL Revealed panel option (Presenter Series lecterns only.)

3 Model # CWS Combination flat/sloped work surface Model # DCWS Deluxe combination flat/ sloped work surface. Designed to provide superior viewing angle for larger LCD monitors. Model # SCOV Security work surface cover with lock Model # RTC Roll top cover for 36 and 48 (Presenter Series lecterns only.) Model # TMR Digital clock/timer Model # CCO Custom cutout Model # IDOC-B Basic ipod docking station with remote. Component AV cables not included. Model # IDOC-D Deluxe ipod docking station with remote. Includes RS232 output. Component AV cables not included. Model # CPO Cable port outlet Model # DPLX Duplex outlet Model # MM Microphone mount installation charge (Customer to supply template or mount.) Model # CP-2 Connectivity panel with duplex, 3.5 stereo, VGA, and CAT6 inputs

4 Model # CCB Storage well Model # GSM Microphone and shock mount Also available: Model # SHLF Adjustable shelf with standards. Additional shelves available Model # RM Rack mount Model # GS Mic arm and shock mount only. Model # LL18 Task light with dimmer Model # RKB Rack box, specify 13 or 16 space Model # WD Wiring duct Model # CF Cooling fan Model # CWSP-1 Custom wedge module Model # THRM Thermostat control for cooling fan Model # HDC3 Hidden 3 heavy-duty casters Model # LRC Locking 3 heavy-duty casters

5 Model # BKLK Black finished lock Model # CBLK Combination lock Model # HLDR Acrylic user manual holder Model # CSU Custom stain Model # LOGO Satin brass logo with black lettering See page 30 Model # WLOGO Laser etched wood logo See page 30 Model # PSM Stereo amplifier (SML-2 & MMC-1 only) Model # PS8 8 outlet power strip with 6 foot cable Model # FPM Universal LCD/Plasma tabletop mount Model # HACM Adjustable set top camera mount Model # HA Hydraulic height adjustment for RC Camberlin and Presenter Series lecterns with 6 travel

6 Accessories & Options Custom Panel Cut-Out Reading surface can be cut out to accept your accessory remote control panel. Contact factory for size and space limitations. Custom Logos Identify your facility with one of our distinctive nameplates. Available in a variety of sizes, colors, and materials. Call us at the factory for pricing and delivery. Solid Front Panel Add a distinctive look to your non-amplified Lectern One or Lectern Two by replacing the standard grille cloth with a matching veneered solid front panel. Protective Covers Protect your investment with one of our fully lined and padded covers. Manufactured of blue nylon to last for years. Public Address Systems Models PC and PE: Custom engineered sound systems designed to enhance the function of your lectern. Engineered to be both an aesthetic and acoustic match, specifying a sound system will add even more utility to your Sound-Craft lectern. Must be ordered and installed at time of original purchase. 220VAC, 50/60 Hz available. Wireless Microphones The ultimate option for freedom of movement and audience participation. Permits 100 feet of cable-free operation. Receiver is built-in, with wireless control located on master control panel. Must be factory installed and requires public address option. Hand-held and lavaliere transmitters available. Lavaliere Microphone Model SC46: A lightweight clip-on microphone perfect for walk-around use. Set includes microphone with 25 foot cable, tie-clip, mic cord and windscreen. AMPLIFIER SPECIFICATIONS: (optional) Model# PC Audio Power: (Watts RMS/Peak) 18/35 Speakers: Model LC: Eight - 4 inch Model TC: Four - 4 inch Model TCFLS: Four 4 inch Microphone: Cardioid, electret Microphone Inputs: Three Reading Light: Yes Auxiliary Input: One Auxiliary Output: One Speaker Outputs: Two Batteries: Two 6 Volt Lantern Type (not supplied) Battery Life: 60 hours Power Supply: 115 Volts A.C., (220 V.A.C. optional) Note: Reading light not supplied on 220 V.A.C. versions Model# PE Audio Power: (Watts RMS/Peak) 24/45 Speakers: Two, 4 Cone, extended range Microphone: Cardioid, Electret Tone Controls: Bass and Treble Microphone Inputs: Three Auxiliary Input: One Auxiliary Output: One Speaker Outputs: Two Power Supply: 115 Volts A.C., (220 V.A.C. optional) Microphone and Support Arm For those who already have a house or room amplification system and need only a microphone or a microphone support arm. Consult price list for appropriate model number. Handheld Microphone Model MK20: Our heavyduty die-cast microphone, complete with 20 foot cable, on/off switch and stand adapter. Perfect for audience participation.

7 Lecternette Accessories Wireless Microphones Add some real freedom of movement with our wireless microphones. The receiver is built into the lectern so there are no cables to become lost or worn. Transmitter and microphone store in the handy Lecternette accessory compartment; choice of lavaliere or handheld transmitter. Folding Stand The perfect complement to your Lecternette. A matching stand enhances the appearance of your lectern while preserving the important feature of portability. Has built-in speaker column for increased audience capacity and places Lecternette at proper height. Folds into a compact, easy-to-carry unit, complete with handles. Add-On Speakers A natural companion to the Lecternettes. Designed to extend voice amplification to larger groups or to conquer unusual acoustical problems. Each set consists of two sections, each containing a speaker column and 50 ft. of cable. Both sections fit together to make a compact, portable unit. Model TR45 Heavy duty tripod set with carrying bag and mounting bracket. R06 on TR45 Stand Lecternette Specifications R600 R160 *Audio Power (Watts-RMS/Peak) 14/27 14/27 Integrated Amplifier YES YES **Audience Capacities With Add-On Speakers 1,000 1,000 Speakers-4 Cone, Extended Range 4 4 Microphone, Cardioid 1 1 Master Volume Controls 1 0 Output Channels 1 1 Microphone Inputs 3 2 Reading Light YES NO Battery Condition Meter YES YES Battery Operation Light YES NO Auxiliary Input YES YES Auxiliary Output YES YES Dimensions - Closed X X 20 Dimensions - Reading Counter X Weight - Pounds, with Batteries Batteries - 6-Volt Lantern Type (Optional) 2 2 Battery Life - Hours ***Power Supply: Battery (Optional) YES YES 115-Volt A.C. (220V AC Available) YES YES * Audio Power (Watts - RMS) Rated according to American National Standard Institute para for Speech Amplifiers, A.C. powered. **Audience capacities are approximate numbers and may vary considerably depending on acoustical conditions, type of audience and competitive noise. *** A rechargeable battery power supply is available on a factory installed basis. Check current price sheet for cost and availability.

8 LOGOS