2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays

Size: px

Start display at page:

Download "2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays"

Ellen Rose
6 years ago
Views:

.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.

Broadcasting and video markets. Digital broadcasting equipment STB/tuner.

1 .6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE) mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available Compact and slim size Size: (L).(W) 8.9(H)* mm (L).44(W).35(H) inch *The height of Surface-mount type is 9.6 mm.378 inch size. TYPICAL APPLICATIONS. Broadcasting and video markets. Digital broadcasting equipment STB/tuner. Communications market Antennae switching All types of wireless devices If you consider using applications with low level loads or with high frequency switching, please consult us. RoHS compliant Protective construction: Sealed type ORDERING INFORMATION RE relays Contact arrangement : Form C ARE Operating function : Single side stable type (Impedance 5Ω) 3: Single side stable type (Impedance 75Ω) Terminal shape Nil: Standard PC board terminal A: Surface-mount terminal Coil voltage (DC) 3: 3V, 4H: 4.5V, 6: 6V, 9: 9V, : V, 4: 4V (H=.5) Packing style Nil: Carton packing (Standard PC board terminal only) Tube packing (Surface-mount terminal only) Z: Tape and reel packing (picked from 4 pin side) (Surface-mount terminal only) ASCTB4E 73-T

2 TYPES. Standard PC board terminal Part No. Standard packing Single side stable type (Impedance 5Ω) Single side stable type (Impedance 75Ω) Carton Case 3 V DC ARE3 ARE V DC ARE4H ARE34H 6 V DC ARE6 ARE36 9 V DC ARE9 ARE39 V DC ARE ARE3 4 V DC ARE4 ARE34 5 pcs. 5 pcs.. Surface-mount terminal ) Tube package Part No. Standard packing Single side stable type (Impedance 5Ω) Single side stable type (Impedance 75Ω) Tube Case 3 V DC AREA3 ARE3A3 4.5 V DC AREA4H ARE3A4H 6 V DC AREA6 ARE3A6 9 V DC AREA9 ARE3A9 V DC AREA ARE3A 4 V DC AREA4 ARE3A4 5 pcs. pcs. ) Tape and reel package Part No. Standard packing Single side stable type (Impedance 5Ω) Single side stable type (Impedance 75Ω) Tape and reel Case 3 V DC AREA3Z ARE3A3Z 4.5 V DC AREA4HZ ARE3A4HZ 6 V DC AREA6Z ARE3A6Z 9 V DC AREA9Z ARE3A9Z V DC AREAZ ARE3AZ 4 V DC AREA4Z ARE3A4Z 4 pcs. 8 pcs. RATING. Coil data Pick-up voltage* (at C 68 F) * Square, pulse drive (JIS C544) Drop-out voltage* (at C 68 F) Rated operating current [±%] (at C 68 F) Coil resistance [±%] (at C 68 F) 3 V DC 66.7 ma 45 Ω 4.5 V DC 44.4 ma Ω 6 V DC 75%V or less of %V or more of 33.3 ma 8 Ω rated voltage rated voltage 9 V DC (Initial) (Initial). ma 45 Ω V DC 6.7 ma 7 Ω 4 V DC 8.3 ma,88 Ω Rated operating power mw Max. allowable voltage %V (at 6 C 4 F) 5%V (at C 68 F) of rated voltage ASCTB4E 73-T

3 . Specifications Characteristics Item Specifications Contact data Arrangement Contact resistance (initial) Contact material Contact rating (resistive) Contact input power Max. switching voltage Max. switching current High frequency V.S.W.R. characteristics (Initial) Insertion loss (Impedance 5Ω) Isolation High frequency V.S.W.R. characteristics (Initial) Insertion loss (Impedance 75Ω) Isolation Insulation resistance (Initial) Breakdown voltage (Initial) Time characteristics Mechanical characteristics Expected life Conditions Unit weight Between open contacts Between contact and coil Between contact and earth terminal Operate time (initial) Release time (initial) Shock resistance Vibration resistance Mechanical Electrical Functional Destructive Functional Destructive Conditions for operation, transport and storage* Form C Max. mω (By voltage drop V AC ma) Gold plating W (at.6 GHz [Impedance 5Ω, V.S.W.R. Max..7] [Impedance 75Ω;, V.S.W.R. Max..5]) ma 4V DC W (at.6ghz [Impedance 5Ω, V.S.W.R. Max..7] [Impedance 75Ω, V.S.W.R. Max..5]) 3V DC.5A DC Max..3 (to ), Max..7 (to.6ghz) Max..dB (to ), Max..7dB (to.6ghz) Min. 6dB (to ), Min. 3dB (to.6ghz) Max.. (to ), Max..5 (to.6ghz) Max..dB (to ), Max..5dB (to.6ghz) Min. 6dB (to ), Min. 3dB (to.6ghz) Min. MΩ (at 5V DC, Measured portion is the same as the case of dielectric voltage.) 5 Vrms for min. (detection current: ma), Vrms for min. (detection current: ma) 5 Vrms for min. (detection current: ma) Max. ms (at C 68 F, at rated voltage, without bounce) Max. 5ms (at C 68 F, at rated voltage, without bounce, without diode) Min. 5 m/s (half-sine shock pulse: ms; detection time: μs) Min.,m/s (half-sine shock pulse: 6ms) to 55 Hz at double amplitude of 3mm (detection time: μs) to 55 Hz at double amplitude of 5mm Min. 6 (at 8 times/min.) Min. 3 5 (W,.6GHz, [Impedance 5Ω, V.S.W.R..7] [Impedance 75Ω, V.S.W.R..5]) Min. 3 5 (ma 4V DC (resistive) (at times/min.)) Ambient temperature: 4 to +7 C 4 to +58 F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) Approx. 5 g.8 oz Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT in GENERAL APPLICATION GUIDELINES. REFERENCE DATA -(). High frequency characteristics (Impedance 5Ω) (Standard PC board terminal) V.S.W.R. characteristics Insertion loss characteristics Isolation characteristics V.S.W.R Insertion loss, db Isolation, db (). High frequency characteristics (Impedance 75Ω) (Standard PC board terminal) V.S.W.R. characteristics Insertion loss characteristics Isolation characteristics. V.S.W.R Insertion loss, db Isolation, db ASCTB4E 73-T

4 DIMENSIONS (mm inch) The CAD data of the products with a. Standard PC board terminal (5Ω, 75Ω type) mark can be downloaded from: Schematic (Bottom view) 7 Stand off..44 Direction indication (.49) 7.6 (.9).. (.59).3 (.8) Tolerance: ± ±. (Deenergized condition) PC board pattern 9-. dia dia Tolerance: ±. ±.4. Surface mount terminal 5Ω type (.7) (.8). Schematic (Top view) Direction indication 7 3. ±.5.5 ±...44 (Deenergized condition) PC board pattern (.3) (.5) (.49) 7.6 (.9) (.59).3 (.8) Tolerance: ± ± Tolerance: ±. ±.4 75Ω type Schematic (Top view) (.7) (.8) ±.5..5 ±..44 Direction indication 7 (.3) (.5) (Deenergized condition) PC board pattern (.49) 7.6 (.9).. (.59).3 (.8) Tolerance: ± ± Tolerance: ±. ±.4 4 ASCTB4E 73-T

5 NOTES. Coil operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different.. Cleaning For automatic cleaning, the boiling method is recommended. Avoid ultrasonic cleaning which subjects the relays to high frequency vibrations, which may cause the contacts to stick. It is recommended that alcoholic solvents be used. 3. Soldering (Standard PC board terminal) ) The manual soldering shall be performed under following condition. Max. 6 C 5 F s Max. 35 C 66 F 3s The affect of the PCB on the relay will differ depending on the type of PCB used. Please verify the type of PCB to be used. Preheat according to the following conditions. Temperature C 48 F or less Time Within minute Soldering should be done at 6±5 C 5±9 F within 6 s. ) In case of automatic soldering, the following conditions should be observed (Surface-mount terminal) () Position of measuring temperature A: Surface of PC board where relay is mounted. () IR (infrared reflow) soldering method T3 T T t Temperature rise of relay itself may vary according to the mounting level or the heating method of reflow equipment. Therefore, please set the temperature of soldering portion of relay terminal and the top surface of the relay case not to exceed the above mentioned soldering condition. It is recommended to check the temperature rise of each portion under actual mounting condition before use. t A T= 55 to 65 C 3 to 39 F T= 8 to C 356 to 39 F T3= 45 C max. 473 F max. t= within s t= within 3s 4. Packing style ) Tape dimensions.5 +. Relay polarity bar R.75.3 RE Relay Tape coming out direction ) Dimensions of plastic reel. ±.5.79 ±. dia ±.5.79 ± ±.8 dia..87 ±.3 dia. Max ±. dia..5 ±.8 dia Max ±.73 ± ± ±.8 5. Conditions for operation, transport and storage conditions ) Ambient temperature, humidity, and atmospheric pressure during usage, transport, and storage of the relay: () Temperature: 4 to +7 C 4 to +58 F () Humidity: 5 to 85% RH (Avoid freezing and condensation.) The humidity range varies with the temperature. Use within the range indicated in the graph below. (3) Atmospheric pressure: 86 to 6 kpa Temperature and humidity range for usage, transport, and storage: (Avoid freezing when used at temperatures lower than C 3 F) Tolerance range Humidity, %R.H. (Avoid condensation when used at temperatures higher than C 3 F) Temperature, C F ) Condensation Condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. Condensation will cause deterioration of the relay insulation. 3) Freezing Condensation or other moisture may freeze on the relay when the temperature is lower than C 3 F. This causes problems such as sticking of movable parts or operational time lags. 4) Low temperature, low humidity environments The plastic becomes brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. 5 ASCTB4E 73-T

6 6. Measuring method ) 5Ω type ) 75Ω type Network Analyzer HP 8753C B A R B A R S Parameter Testset HP 8547A PORT Network Analyzer HP 8753ES PORT RF OUT RF IN PORT PORT Connect connectors and respectively to PORT and PORT. Perform calibration using the 3.5 mm.38 inch calibration kit (5Ω). No. Part number Description HP 857D 7mm.76inch Test port, Extension cable. (APC7 connector) HP 533A Adapter APC7-SMA (Male) After calibration, connect the D.U.T board and measure. D.U.T board Dimension (mm inch) Connect connectors and respectively to PORT and PORT. Perform calibration using the 3.5 mm.38 inch calibration kit (7Ω). No. Part number Description HP 857B 75ΩF Test port, Return cable Adapter 75ΩN (Female) 75ΩF (Male) After calibration, connect the D.U.T board and measure. D.U.T board Dimension (mm inch) <Standard PC board terminal type> <Surface-mount terminal type> 7..7 <Standard PC board terminal type> <Surface-mount terminal type> SMA connector to be soldered SMA connector to be soldered F connector to be soldered F connector to be soldered Material: Glass PTFE (Double sided, Through hole) R-4737 (Panasonic Corporation) Thickness: t =.8mm.3inch Copper thickness: 8μm Connector (SMA) Product name: R5 5 (RADIALL) Material: Glass PTFE (Double sided, Through hole) R-4737 (Panasonic Corporation) Thickness: t =.8mm.3inch Copper thickness: 8μm Connector (F) Product name: C5-36 (KOMINE MUSEN DENKI) For general cautions for use, please refer to the General Application Guidelines. 6 ASCTB4E 73-T

Up to 8 GHz small microwave relays

Up to 8 GHz small microwave relays RJ RELYS (RJ) 1..1 1..1..3 8.2..3 8.2 FETURES Excellent high frequency characteristics (, at GHz) V.S.W.R.: 1.2 Insertion loss:.db Isolation: Min. 3dB (Between open contacts)