Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:

Transcription

1 Repair Parts List DRYER MODEL NUMBER MDG50PNHWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005 Maytag Services

2 Section: CONTROL DOOR Model: MDG50PNHWW OD

3 Section: CONTROL DOOR No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A LOCK, SPECIAL DUMMY A CAM, LOCK A LOGO A CONTROL DOOR WHT A STRIP, TRIM BLK A TAPE, FOAM (SOLD IN FEET) A NUT, FREE SPIN WASH (#20-1/4) A /4" TORX SCREW A CATCH, ROD SUPPORT-CTRL. DOOR A CLIP, ROD RETAINER-CTRL. DOOR A ROD, SUPPORT (CONTROL DOOR) 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 2

4 Section: CONTROL PANEL (MICROPROCESSOR) Model: MDG50PNHWW OD

5 Section: CONTROL PANEL (MICROPROCESSOR) No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A KEYBOARD, PHASE 7 OPL A KEYBOARD, PHASE 7 OPL A PANEL, MICROPRO PHASE 7 ONLY A CONTROL PANEL, COMPLETE A MICROPROCESSOR, PHASE 7 OPL A MICROPROCESSOR, PHASE 7 OPL A SCREW, PHILL (6-32 X 1/4")RND A WASHER, STAR (#6) A FUSE, 5 AMP A FUSE, 500MA FUSE 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 4

6 Section: CONTROL BOX (MICROPROCESSOR) Model: MDG50PNHWW OD

7 Section: CONTROL BOX (MICROPROCESSOR) No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A CONNECTOR, 10 PIN A CONNECTOR, 8 PIN A CONNECTOR, 2 PIN A CONNECTOR, 6 PIN A CONNECTOR, 9 PIN A SOCKETS A TERMINAL, FEMALE CRIMP *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 6

8 Section: FRONT PANEL Model: MDG50PNHWW OD

9 Section: FRONT PANEL No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A PANEL, FRONT RIGHT HAND WHT A SCREW, CRIMPTITE A GROMMET, RUBBER A SWITCH, LINT BASKET A LATCH, DOOR (FRICTION) A RIVET, POP (5/32") A TRIM, FRONT PANEL BLK A NUT, FREE SPIN WASH (#20-1/4) 10 5 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 8

10 Section: DOOR SWITCH Model: MDG50PNHWW OD

11 Section: DOOR SWITCH No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A NUT, HEX (#6-32) A WASHER, SPLIT LOCK (#6) A SWITCH, DOOR (SINGLE POLE) A TERMINAL, 1/4" INSUL. (FEMALE) A SPACER, NYLON (3/8") A BLACK DOOR HINGE A SELF-CLINCHING STUD #6 32X A HOUSING, MAIN DOOR SWITCH A SCREW, MACHINE (#10-32 X 1/4") A GROMMET, RUBBER 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 10

12 Section: MAIN DOOR Model: MDG50PNHWW OD

13 Section: MAIN DOOR No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A BLACK GLASS ADHESIVE (10.3 OZ) A GLASS, DOOR (20-7/16" ONLY) A HANDLE EDGE A NUT, FREE SPIN WASH (#20-1/4) A BLACK DOOR HINGE A LATCH SCREW A BLACK ACORN NUT A GASKET, DOOR A BLACK MAIN DOOR ASSY A NUT, FREE SPIN WASH (#20-1/4) 10 4 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 12

14 Section: LINT DRAWER/SWITCH Model: MDG50PNHWW OD

15 Section: LINT DRAWER/SWITCH No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A LINT DRAWER WHT A TAPE, FOAM (SOLD IN FEET) A SWITCH, LINT BASKET A CONNECTOR, 4-PIN SOCKET A TERMINAL, SOCKET (ONLY) A TOOL, EXTRACTION (PIN/SOCKET) A SWITCH BOX, COVER ONLY A SWITCH BOX, LINT DRAWER ASSY A SCREW, TEK (#8-18 X 7/16 PH A TERMINAL, PIN A CONNECTOR (4 PIN) 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 14

16 Section: TUMBLER SUPPORT Model: MDG50PNHWW OD

17 Section: TUMBLER SUPPORT No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A TUMBLER, GALVANIZED A TUMBLER, GALVANIZED COMPLETE A SCREW A TROX HAND DRIVER A TUMBLER RIB ONLY(LOW RIB) A TAPERED TUMBLER BAFFLE RIB(HI) A ADHESIVE, FELT COLLAR # A FELT COLLAR A TIE ROD A WASHER, FLAT (3/8") A SUPPORT, TUMBLER A NUT, HEX (#16-3/8") A WASHER, LOCK (3/8") A WASHER, FLAT (3/8") A PAD, FELT TUMBLER 1/4X *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 16

18 Section: SENSOR BRACKET Model: MDG50PNHWW OD

19 Section: SENSOR BRACKET No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A PROBE ASSY., TEMP. (1/4") A THERMOSTAT (225 DEGREE) A WASHER, STAR (#6) A NUT, HEX (#6-32) A TERMINAL, 1/4" INSUL. (FEMALE) A TERMINAL, SOCKET (ONLY) A CONNECTOR, 4-PIN SOCKET A FASTENER, PUSH-ON (1/4") A SCREW, PHILL (6-32 X 1/4")RND A BRACKET, SENSOR A SENSOR BRACKET ASSY A CONNECTOR (4 PIN) A TERMINAL, PIN A SCREW, TEK (#8-18 X 7/16 PH 10 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 18

20 Section: TUMBLER BEARING Model: MDG50PNHWW OD

21 Section: TUMBLER BEARING No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A BEARING, FLANGE A LOCK WASHER (9/16") A HEX NUT (#9/16-12) A BEARING, PILLOW BLOCK,COMPLETE A BEARING SUPPORT ONLY A BEARING, PILLOW BLOCK A BOLT, MACHINE A WASHER, FLAT (3/8") A WASHER, FLAT (3/8") A WASHER, LOCK (3/8") A WASHER, LOCK (3/8") A NUT, HEX (#18-5/16) A BOLT, MACHINE (#18-5/16X1 1/2) A WASHER, LOCK (5/16") A WASHER, FLAT (3/8") A BOLT, MACHINE (#18-5/16 X 3/4) A SINTERED 8 MAGNET A SENSOR, ROTATIONAL A SHAFT KEY (FOR TAPER LOCK HUB) A PULLEY (18") A BUSHING A V-BELT A COLLAR, GRIPLOCK A SCREW, SET (#18-5/16" X 1 1/2) A NUT, HEX (#18-5/16) A COLLAR, GRIPLOCK 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 20

22 Section: IDLER BEARING Model: MDG50PNHWW OD

23 Section: IDLER BEARING No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A V-BELT A PULLEY W/KEY(9" X 2 1/2") A V-BELT A SCREW, ALLEN (#18-5/16 X 5/16) A KEY (3/16" X 3/16" X 1-3/8") A BEARING, IDLER COMPLETE A BOLT, MACHINE (#16-3/8 X 1") A WASHER, LOCK (3/8") A WASHER, FLAT (3/8") A WASHER, IDLER (SQ) A NUT, HEX (#18-5/16) A BOLT, MACHINE (5/16-18 X 3") 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 22

24 Section: GAS BURNER Model: MDG50PNHWW OD

25 Section: GAS BURNER No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A BURNER, TUBE (LARGE) A NUT, PAL (#8-32) A SCREW, MACHINE A BURNER ORIFICE (LP) A ORIFICE, BURNER (NAT) A MANIFOLD, DSI (3-PORT 1/2") A SCREW, CRIMPTITE A BRACKET, HORIZONTAL GAS VALVE A VALVE,GAS 1/2" 24 VAC,(LP) A VALVE, REDUNDANT (1/2" 24VAC) A IGNITER/FLAME PROBE KIT ASSY A WIRE, FLAME PROBE A SCREW (#10-32 X 1/2" PH ROUND A MOUNTING BRACKET, DSI ASSY A MODULE (DSI) A MODULE (DSI) A ASSY, BRACKET A NUT, HEX (#6-32) A NIPPLE (1/2" X 1-1/2") A ELBOW, STREET (1/2" X 1/2") A UNION (1/2") A PIPE (1/2" X 29 1/8") A BURNER BOX COMPLETE (NAT) A BURNER BOX COMPLETE (LP) A CONVERION KIT (NAT TO LP) A BURNER BOX ONLY 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 24

26 Section: SAIL SWITCH/HI LIMIT Model: MDG50PNHWW OD

27 Section: SAIL SWITCH/HI LIMIT No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A NUT, TWIN SPEED A SCREW (#10-32 X 1/2" PH ROUND A COVER, SAIL SWITCH BOX W/BRKT A SCREW (#4 X 3/4") A SWITCH, SAIL A ROD, SAIL SWITCH ACTUATOR A DAMPER, SAIL SWITCH (FLAT) A FASTENER, PUSH-ON (1/8") A BOX, SAIL SWITCH ASSY A BOX, SAIL SWITCH (ONLY) A PIPE (1/2" X 29 1/8") A SCREW (#10-32 X 1/2" PH ROUND A BRACKET, HI-LIMIT MOUNTING A PAL NUT (#6-32) A SCREW, MACHINE (#6-32 X 1/2") A HI-LIMIT 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 26

28 Section: MOTOR MOUNT Model: MDG50PNHWW OD

29 Section: MOTOR MOUNT No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A V-BELT A KEY (3/16" X 3/16") A PULLEY, MOTOR (5/8" X 2") A BOLT, MACHINE (#18-5/16 X 3/4) A WASHER, LOCK (5/16") A WASHER, FLAT (5/16") A /4 HP 115V 10 MOTOR W/PLUG A TOOL, EXTRACTION (PIN/SOCKET) A TERMINAL, SOCKET (ONLY) A HOUSING (8 PIN) A NUT, HEX (#18-5/16) A WASHER, LOCK (5/16") A WASHER, FLAT (5/16") A TAPE, FOAM (SOLD IN FEET) A NUT (#18-5/16") A MOTOR, MOUNT A MOTOR, 3/4HP 60HZ COMPLETE A WASHER, FLAT (1/2") A IMPELLOR (12 1/2" W/ 1/2 BORE) A KEY (1/8" X 1/8" X 1 1/2") A WASHER, FLAT (1/2") A NUT, JAM (#20-1/2" LT-HAND) 10 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 28

30 Section: REAR ELECTRIC PANEL Model: MDG50PNHWW OD

31 Section: REAR ELECTRIC PANEL No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A PAL NUT (#6-32) A SCREW (#10-32 X 1/2" PH ROUND A SCREW, MACHINE A TERMINAL BLOCK, 2-POSTION A PLATE, BACK A PANEL, REAR ELEC. COMPLETE A TRANSFORMER 115V A STRIP, FUSE BLOCK (ONLY) A FUSE, 1/2-AMP SLO-BLO A SCREW, TEK (#8-18 X 7/16 PH A WASHER, TEK SCREW A NUT, HEX (#18-5/16) A LUG, GROUND (L-70) A WASHER, LOCK (5/16") A CONTACTOR, 3-POLE A BUSHING, OPEN/CLOSED A RELAY, SPST 24V 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 30

32 Section: OUTER TOP/BACK GUARD Model: MDG50PNHWW OD

33 Section: OUTER TOP/BACK GUARD No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A COVER, ELECTRICAL BOX (REAR) A SCREW, TEK (#8-18 X 7/16 PH A GUARD, TOP BACK A SCREW, TEK (#8-18 X 7/16 PH A SCREW (#10-32 X 1/2" PH ROUND A GUARD, TOP (OUTER) A GUARD, BOTTOM BACK A SCREW, TEK (#8-18 X 7/16 PH A LEG, LEVELING (ADJUSTABLE) 10 4 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 32

34 Section: TEMPERATURE PROBE (SAFE) Model: MDG50PNHWW OD

35 Section: TEMPERATURE PROBE (SAFE) No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A PROBE, TEMP (COMPLETE) A FASTENER, PUSH-ON (1/4") A BRACKET, SENSOR A SCREW, TEK (#8-18 X 7/16 PH A CONNECTOR (NO TERMINALS) 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 34

36 Section: SOLENOID AND PIPING (SAFE) Model: MDG50PNHWW OD

37 Section: SOLENOID AND PIPING (SAFE) No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A VALVE, SOLENOID (SAFE) A TEE, BRASS 3/ A PLUG, BRASS 3/ A CONNECTOR, BRASS 3/ A TUBING, WALL COPPER (FOOT) A MOUNTING PLATE, SPRINKLER A LOCKNUT, BRASS A ELBOW, BRASS 90 DEG A SCREW, SELF DRILLING (PH) A SCREW, TEK (#8-18 X 7/16 PH A NOZZLE, SPRAY A BUSSING, 1/2 X 3/ A NETWORK, R.C *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 36

38 Section: SUPPLEMENTAL INFORMATION No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: # A CONNECTOR, IN-LINE (1/4") A NUT, WIRE (CRIMP-ON) A CONNECTOR, RED BUTT A NUT, WIRE (#74B) A TIE, HARNESS (7") 10 1 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 37

39 Section: LINT DRAWER/SWITCH SERIES 11 Model: MDG50PNHWW OD

40 Section: LINT DRAWER/SWITCH SERIES 11 No. Part No. Description Series Qty - A ORDER PART FROM AMERICAN DRYER Note: PHONE # A ASSY, LINT DRAWER Note: INCLUDES 1 THRU 3, SPECIFY COLOR A ASSY, LINT DRAWER (SS) Note: INCLUDES 1 THRU A TAPE, FOAM (SOLD IN FEET) A ASSY, LINT SCREEN A SWITCH, LINT BASKET A CONNECTOR, 4-PIN SOCKET A TERMINAL, SOCKET (ONLY) A TOOL, EXTRACTION (PIN/SOCKET) A SWITCH BOX, LINT DRAWER ASSY A SWITCH BOX, COVER ONLY A SCREW, TEK (#8-18 X 7/16 PH A TERMINAL, PIN A CONNECTOR (4 PIN) 11 2 *Color Code (-)=Not Shown #=Series, Serial Prefix or Run No., N=Not Available 39

41