Connecting EPSON Display Controllers to Topway LCD Panels
|
|
|
- Antony Elliott
- 5 years ago
- Views:
Transcription
1 Connecting EPSON Display Controllers to Topway LCD Panels Document Number: Issue Date: 2012/04/23 SEIKO EPSON CORPORATION Rev. 1.0
2 Page 2 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2012, All rights reserved. to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
3 Page 3 Table of Contents 1 Introduction Display Controller Compatibility Connecting to the LMT035KDH LMT035KDH03 Pin Mapping Connection Examples Connecting the LMT035KDH03 to the Example Register Settings Change Record...12 Issue Date: 2012/04/23 Revision 1.0 to Topway LCD Panels
4 Page 4 to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
5 Page 5 1 Introduction This document provides connection information enabling EPSON Display Controllers to control a variety of Shenzhen TOPWAY Technology CO.,LTD LCD panels. This document includes connector details, pin mappings, and example register settings. For detailed technical information on EPSON Display Controllers or Shenzhen TOPWAY LCD panels, please refer to the specification or technical manual for each product. This document is updated as appropriate. Please check for the latest revision of this document before beginning any development. The latest revision can be downloaded at Issue Date: 2012/04/23 Revision 1.0 to Topway LCD Panels
6 Page 6 2 Display Controller Compatibility This document discusses the following Shenzhen Topway TFT panel. LMT035KDH03 (a-si TFT, 3.5inch, 320x240) The Shenzhen Topway TFT panel is compatible with one or more of the following EPSON display controllers. (QFP 100-pin) For further information on the Topway TFT panel go to the Shenzhen TOPWAY Technology CO.,LTD LCD products web site to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
7 Page 7 3 Connecting to the LMT035KDH03 The LMT035KDH03 TFT panel is compatible with the display controller. The following sections will provide connector details, pin mappings, and example register settings for these combinations. 3.1 LMT035KDH03 Pin Mapping The LMT035KDH03 TFT panel uses a 54-pin connector with the following pin mapping. Table 3-1 LMT035KDH03 Pin Mapping Connector Pin# Pin Description 1 LED_CATHODE Backlight LED CATHODE Supply 2 LED_CATHODE Backlight LED CATHODE Supply 3 LED_ANODE Backlight LED ANODE Supply 4 LED_ANODE Backlight LED ANODE Supply 5 NC No Connection 6 NC No Connection 7 NC No Connection 8 /RES Hardware Reset 9 /SPEN SPI enable signal, active LOW, normal HIGH 10 SPCK SPI clock signal, rising edge trigger 11 SPDA SPI Data signal 12 D0 Blue data0 13 D1 Blue data1 14 D2 Blue data2 15 D3 Blue data3 16 D4 Blue data4 17 D5 Blue data5 18 D6 Blue data6 19 D7 Blue data7 20 D8 Green data0 21 D9 Green data1 22 D10 Green data2 23 D11 Green data3 24 D12 Green data4 25 D13 Green data5 26 D14 Green data6 27 D15 Green data7 28 D16 Red data0 29 D17 Red data1 30 D18 Red data2 31 D19 Red data3 Issue Date: 2012/04/23 Revision 1.0 to Topway LCD Panels
8 Page 8 Connector Pin# Pin Description 32 D20 Red data4 33 D21 Red data5 34 D22 Red data6 35 D23 Red data7 36 HSYNC Horizontal Sync Signal 37 VSYNC Vertical Sync Signal 38 DCLK Data Clock input 39 NC No Connection 40 NC No Connection 41 VDD Positive Power Supply 42 VDD Positive Power Supply 43 NC No Connection 44 NC No Connection 45 NC No Connection 46 NC No Connection 47 NC No Connection 48 NC No Connection 49 NC No Connection 50 NC No Connection 51 NC No Connection 52 DEN Data Enalbe input 53 GND Power Ground Supply 54 GND Power Ground Supply Note The recommended connector is a FH28-54S-0.5SH from Hirose Electric Co., Ltd. The connector is a 0.5mm pitch 54-pin FPC connector (2.55mm thickness). 3.2 Connection Examples The information in this section provides connection examples for the display controllers. In addition to the pin connections for the selected display controller, the LMT035KDH03 requires the following power supplies. VDD VfBLA +3.3V typical ( V) +20.0V typical For VCC, select a voltage within the supportable range of the Display Controller. For further details on the LMT035KDH03, such as power consumption and absolute maximum ratings, please contact your Shenzhen TOPWAY representative. to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
9 Page Connecting the LMT035KDH03 to the The following diagram shows an example implementation of the LMT035KDH03 panel connected to the. LMT035KDH03 3.3V VDD DEN D[23:16] (R) D[15:8] (G) D[7:0] (B) HSYNC VSYNC DCLK PIOVDD DE PDT[23:16] PDT[15:8] PDT[7:0] HS VS PCLK GND GND Figure 3-1 Connecting the LMT035KDH03 to the The following table provides a detailed pin listing for the required connections between the LMT035KDH03 and the. Table 3-2 Connecting the LMT035KDH03 to the LCD Panel Connector Pin# LCD Panel LCD Panel Pin Description QFP Pin# 1 LED_CATHODE Backlight LED CATHODE Supply 2 LED_CATHODE Backlight LED CATHODE Supply 3 LED_ANODE Backlight LED ANODE Supply 4 LED_ANODE Backlight LED ANODE Supply 5 NC No Connection 6 NC No Connection 7 NC No Connection 8 /RES Hardware Reset 9 /SPEN SPI enable signal, active LOW, normal HIGH 10 SPCK SPI clock signal, rising edge trigger 11 SPDA SPI Data signal 12 D0 Blue data0 CN1-1 PDT0 13 D1 Blue data1 CN1-3 PDT1 Issue Date: 2012/04/23 Revision 1.0 to Topway LCD Panels
10 Page 10 LCD Panel Connector Pin# LCD Panel LCD Panel Pin Description QFP Pin# 14 D2 Blue data2 CN1-5 PDT2 15 D3 Blue data3 CN1-7 PDT3 16 D4 Blue data4 CN1-9 PDT4 17 D5 Blue data5 CN1-11 PDT5 18 D6 Blue data6 CN1-13 PDT6 19 D7 Blue data7 CN1-15 PDT7 20 D8 Green data0 CN1-17 PDT8 21 D9 Green data1 CN1-19 PDT9 22 D10 Green data2 CN1-21 PDT10 23 D11 Green data3 CN1-23 PDT11 24 D12 Green data4 CN1-25 PDT12 25 D13 Green data5 CN1-27 PDT13 26 D14 Green data6 CN1-29 PDT14 27 D15 Green data7 CN1-31 PDT15 28 D16 Red data0 CN1-4 PDT16 29 D17 Red data1 CN1-6 PDT17 30 D18 Red data2 CN2-3 PDT18 31 D19 Red data3 CN2-5 PDT19 32 D20 Red data4 CN2-7 PDT20 33 D21 Red data5 CN2-9 PDT21 34 D22 Red data6 CN2-11 PDT22 35 D23 Red data7 CN2-13 PDT23 36 HSYNC Horizontal Sync Signal CN1-37 HS 37 VSYNC Vertical Sync Signal CN1-39 VS 38 DCLK Data Clock input CN1-33 PCLK 39 NC No Connection 40 NC No Connection 41 VDD Positive Power Supply CN1-32 PIOVDD 42 VDD Positive Power Supply CN1-32 PIOVDD 43 NC No Connection 44 NC No Connection 45 NC No Connection 46 NC No Connection 47 NC No Connection 48 NC No Connection 49 NC No Connection 50 NC No Connection 51 NC No Connection 52 DEN Data Enalbe input CN1-35 DE 53 GND Power Ground Supply CN1-2 GND to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
11 Page 11 LCD Panel Connector Pin# LCD Panel LCD Panel Pin Description QFP Pin# 54 GND Power Ground Supply CN1-2 GND Note Allocation of GND and PIOVDD pin for each package is as follows. GND: QFP 12, 23, 38, 48, 57, 67, 80, 90 PIOVDD: QFP 60, 73, Example Register Settings In addition to the pin connections, the internal registers must be configured appropriately for the LMT035KDH03 LCD panel. The following tables provide example settings for each display controller. Also included in the table is an example clock configuration designed to achieve a typical LCD refresh. Table 3-3 Example Register Settings for the Register Index and Name Register Setting Parameter Value REG[10h] PLL Setting Register h PLL enable REG[12h] PLL Setting Register 1 000Bh MM=12 REG[14h] PLL Setting Register h LL=33 REG[16h] Internal Clock Configuration Register 0008h fpll_ref_clk = fclki/9 REG[20h] Panel Setting Register 006Fh DE: Hi-active PCLK Polarity: Faling edge PanelType: Color TFT 24-bit REG[24h] Horizontal Display Width Register 0028h 320 REG[26h] Horizontal Non-Display Period Register 0066h 102 REG[28h] Vertical Display Height Register 00F0h 240 REG[2Ah] Vertical Non-Display Period Register 0021h 33 REG[04h] Power Save Configuration Register 0002h MCK,PCLK enable REG[22h] Display Setting Register 0001h Panel interface enable CLKI in MHz 24 PCLK in MHz 7.3 LCD refresh in Hz Note Parameter values are determined using a formula based on the register setting. For details on configuring the register values, see the Hardware Functional Specification, document number X92A-G-001-xx. Issue Date: 2012/04/23 Revision 1.0 to Topway LCD Panels
12 Page 12 4 Change Record Revision Issued: April 23, 2012 Re-format and edit document for release to Topway LCD Panels Revision 1.0 Issue Date: 2012/04/23
13 International Sales Operations AMERICA EPSON ELECTRONICS AMERICA, INC. 214 Devcon Drive, San Jose, CA 95112, USA Phone: FAX: EUROPE EPSON EUROPE ELECTRONICS GmbH Riesstrasse 15, Munich, GERMANY Phone: FAX: ASIA EPSON (CHINA) CO., LTD. 7F, Jinbao Bldg., No.89 Jinbao St., Dongcheng District, Beijing , CHINA Phone: FAX: SHANGHAI BRANCH 7F, Block B, Hi-Tech Bldg., 900 Yishan Road, Shanghai , CHINA Phone: FAX: SHENZHEN BRANCH 12F, Dawning Mansion, Keji South 12th Road, Hi-Tech Park, Shenzhen , CHINA Phone: FAX: EPSON HONG KONG LTD. Unit , 7/F Trade Square, 681 Cheung Sha Wan Road, Kowloon, Hong Kong. Phone: FAX: EPSON TAIWAN TECHNOLOGY & TRADING LTD. 14F, No. 7, Song Ren Road, Taipei 110, TAIWAN Phone: FAX: EPSON SINGAPORE PTE., LTD. 1 HarbourFront Place, #03-02 HarbourFront Tower One, Singapore Phone: FAX: SEIKO EPSON CORP. KOREA OFFICE 5F, KLI 63 Bldg., 60 Yoido-dong, Youngdeungpo-Ku, Seoul , KOREA Phone: FAX: SEIKO EPSON CORP. MICRODEVICES OPERATIONS DIVISION IC Sales & Marketing Department 421-8, Hino, Hino-shi, Tokyo , JAPAN Phone: FAX: Document Code: X94A-G First Issue April 2012 Revised April 2012 in JAPAN
S1V3G340 External SPI-Flash Select Guide
S1V3G340 External SPI-Flash Select Guide Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson
For S1C63 Family Flash microcontroller Multiple-Programming ROM Writer Software (GW63)
For S1C63 Family Flash microcontroller Multiple-Programming ROM Writer Software (GW63) Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool
FSA. Library Link. Rev.1.0
FSA Library Object Link Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration,
S1V30080 Series I2C Interface Sample Program Specifications
S1V30080 Series I2C Interface Sample Program Specifications Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
S1C17 Family Port Nested Interrupt Application Notes
S1C17 Family Port Nested Interrupt Application Notes Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
S1C17 Family Application Library S1C17 Series Steps Calculation Library
S1C17 Family Application Library S1C17 Series Steps Calculation Library Rev. 2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed
S1C17 Family EEPROM Emulation Library Manual
S1C17 Family EEPROM Emulation Library Manual Rev.1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation,
S1C31 Family PA File Creation Tool Manual
CMOS 32-BIT SINGLE CHIP MICROCONTROLLER S1C31 Family PA File Creation Tool Manual Rev.2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is
GNU17V3 Setup Guide. Rev.2.0
GNU17V3 Setup Guide Rev.2.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or
S1C17 M01/W22/W23/W15 Self-Modifying Software (FLS) Manual
S1C17 M01/W22/W23/W15 Self-Modifying Software (FLS) Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
S5U1C31D50T1 Manual (S1C31D50 Evaluation Board)
CMOS 32-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D50T1 Manual (S1C31D50 Evaluation Board) Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17656T Manual (Software Evaluation Tool for S1C17656)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17656T Manual (Software Evaluation Tool for S1C17656) Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
SG-8506CA-EVB Preliminary
SG-8506CA Evaluation Board Manual SG-8506CA-EVB Preliminary Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering
S5U1S65K01H4100 Camera Board Technical Manual
S5US65K0H400 Camera Board Technical Manual Rev..0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson
S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board)
MF1434-01 CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C88000P Manual (S1C88 Family Peripheral Circuit Board) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
S1C33 Family Application Note S1C33L26 Software Reference Manual
S1C33 Family Application Note S1C33L26 Software Reference Manual Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use
IMU (Inertial Measurement Unit) IMU / USB Interface Board (M-G3xx, M-V3xx) Logger Software User s Guide
IMU (Inertial Measurement Unit) IMU / USB Interface Board (M-G3xx, M-V3xx) Logger Software User s Guide Rev.20181129 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit
S1V3G340 Development Reference Guide
S1V3G340 Rev.1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes
S1C17 Family Application Note S1C17 Series Boot Loader Sample Software
S1C17 Family Application Note S1C17 Series Boot Loader Sample Software Rev.1.0 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for
S1F77330 Series Technical Manual
Series Technical Manual Rev.2.1 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
S5U1C17000Y2 GangWriter Software Manual
S5U1C17000Y2 GangWriter Software Manual Rev.1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves
S1R72U16 Development Support Manual
S1R72U16 Development Support Manual Rev.2.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves
S5U13781R00C10M User Manual
S5U13781R00C10M User Manual Document Number: Status: Revision 1.0 Issue Date: 2012/09/25 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 Evaluation board/kit and Development tool important notice 1. This evaluation
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17651T2 Manual (Software Evaluation Tool for S1C17651)
CMOS 6-BIT SINGLE CHIP MICROCONTROLLER SUC76T Manual (Software Evaluation Tool for SC76) Rev..0 Evaluation board/kit and Development tool important notice. This evaluation board/kit or development tool
S5U13781R01C100 Shield TFT Board for Arduino Due Users Manual
S5U13781R01C100 Shield TFT Board for Arduino Due Users Manual Document Number: Status: Revision 1.0 Issue Date: 2015/07/17 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 Evaluation board/kit and Development tool
PCB Design Guidelines for S1R72V Series USB 2.0 High-Speed Devices
PCB Design Guidelines for S1R72V Series USB 2.0 High-Speed Devices Rev.2.3 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of
The S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes
OVERVIEW Power Bus Switch IC 2 to 1 Bus Switch The S1F77330 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the S1F77330 series by low power consumption.
SEIKO EPSON CORPORATION
Power Bus Switch IC 1 to 1 Bus Switch OVERVIEW The S1F77310 series is the bus switch suitable for USB applications. The adopted CMOS process technology characterizes the S1F77310 series by low power consumption.
Silicon Epitaxial Planar Zener Diode for Stabilized Power Supply. Type No. Mark Package Code HZS Series Type No. MHD B 7
Silicon Epitaxial Planar Zener Diode for Stabilized Power Supply Features REJ3G184-3Z (Previous: ADE-28-12B) Rev.3. Mar.11.24 Low leakage, low zener impedance and maximum power dissipation of 4 mw are
Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
This product is under planning; the specifications may be changed in the release model.
CMOS 4-bit Single Chip Microcontroller High Performance 4-bit Core CPU S1C63000 Flash EEPROM 31K 13 bits / 4K 4 bits Dot Matrix LCD Controller and Driver R/f Converter to Measure Temperature and Humidity
S5U1C63000P Manual (S1C63 Family Peripheral Circuit Board)
MF1408-01a CMOS 4-BIT SINGLE CHIP MICROCOMPUTER S5U1C63000P Manual (S1C63 Family Peripheral Circuit Board) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
S5U13517P00C100 Evaluation Board User Manual
S5U57P00C00 Evaluation Board User Manual SEIKO EPSON CORPORATION Rev..0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko
HSM107S. Silicon Schottky Barrier Diode for System Protection. ADE F(Z) Rev 6 Sep Features. Ordering Information.
Silicon Schottky Barrier Diode for System Protection ADE-208-058F(Z) Rev 6 Sep. 1998 Features Low V F and high efficiency. which is interconnected in series configuration is designed for protection from
S5U13781R01C100 Shield TFT Board Users Manual
S5U13781R01C100 Shield TFT Board Users Manual Document Number: Status: Revision 1.01 Issue Date: 2016/02/26 SEIKO EPSON CORPORATION Rev. 1.01 Page 2 Evaluation board/kit and Development tool important
S1R72V17 CPU Connection Guide
S1R72V17 CPU Connection Guide Rev. 1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the
Dot Matrix LCD Controller Driver
PF22-7 SED27F/D Dot Matrix LCD Controller Driver /, / or /6 Duty Dot Matrix Drive ROM 24 characters Built-in Character Generator ROM and RAM ( RAM characters ) Maximum Simultaneous Display of Characters
SCI7654M0A/C0A. DC/DC Converter. Double/Triple/Quadruple Boosting 95% Excellent Power Conversion Efficiency Built-in Voltage Regulator DESCRIPTION
PF754-03 SCI7654M0A/C0A DC/DC Converter Double/Triple/Quadruple Boosting 95% Excellent Power Conversion Efficiency Built-in Voltage Regulator DESCRIPTION The SCI7654 is a highly efficient, but low power-consumption
S1C17W23 EL Lamp Application Notes
S1C17W23 EL Lamp Application Notes Rev. 1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration,
HSM88WK. Proof against high voltage. MPAK package is suitable for high density surface mounting and high speed assembly.
Silicon Schottky Barrier Diode for Balanced Mixer ADE-208-0489F (Z) Rev 6 Jul 1998 Features Proof against high voltage. MPAK package is suitable for high density surface mounting and high speed assembly.
1S2075(K) Silicon Epitaxial Planar Diode for High Speed Switching. ADE A (Z) Rev. 1 Aug Features. Ordering Information.
Silicon Epitaxial Planar Diode for High Speed Switching Features Low capacitance. (C = 3.5pF max) Short reverse recovery time. (t rr = 8.0ns max) High reliability with glass seal. ADE-208-144A (Z) Rev.
Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
1SS286. Silicon Schottky Barrier Diode for Various Detector, High Speed Switching
Silicon Schottky Barrier Diode for Various Detector, High Speed Switching ADE-208-302A (Z) Rev. 1 Sep. 1995 Features Very low reverse current. Detection efficiency is very good. Small glass package (MHD)
S1R77022 PCB Design Guide
S1R77022 PCB Design Guide Rev.1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
1SS106. Silicon Schottky Barrier Diode for Various Detector, High Speed Switching
1SS6 Silicon Schottky Barrier Diode for Various Detector, High Speed Switching ADE-208-153A (Z) Rev. 1 Oct. 1998 Features Detection efficiency is very good. Small temperature coefficient. High reliability
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17W23T Manual (Software Evaluation Tool for S1C17W22/W23)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C17W23T Manual (Software Evaluation Tool for S1C17W22/W23) Rev.1.1 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or
* A *, SED1521 * A *
PF469-06 SED520 SED520 Series Dot Matrix LCD SSC5000Series Controller Driver Ultra Low Power Consumption Built-in Video RAM DESCRIPTION The SED520 family of dot matrix LCD drivers are designed for the
Unit: mm Max Max Max Min 5.06 Max Min ± ± 0.10
Unit: mm 19.20 20.32 Max 14 8 6.30 7.40 Max 1 1.30 7 2.39 Max 2.54 ± 0.25 0.48 ± 0.10 0.51 Min 2.54 Min 5.06 Max 0 15 0.25 7.62 + 0.10 0.05 Hitachi Code JEDEC EIAJ Weight (reference value) DP-14 0.97 g
DUAL REVERSIBLE MOTOR DRIVER MB3863
FUJITSU MICROELECTRONICS DATA SHEET DS4-2914-3Ea ASSP DUAL REVERSIBLE MOTOR DRIVER MB3863 DESCRIPTION The MB3863 is an IC motor driver with two independent reverse control functions. It drives motor drives
HZM6.8WA. Silicon Epitaxial Planar Zener Diode for Surge Absorb. ADE A(Z) Rev 1 Feb. 1, Features. Ordering Information.
Silicon Epitaxial Planar Zener Diode for Surge Absorb Features HZM6.8WA has two devices, and can absorb external + and -surge. MPAK Package is suitable for high density surface mounting and high speed
HD74AC240/HD74ACT240
HD74AC240/HD74ACT240 Octal Buffer/Line Driver with 3-State Output Description The HD74AC240/HD74ACT240 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver
S1R72U06 Application Note
S1R72U06 Application Note Rev. 1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
Multi Programmer Ver.4.0 (S5U1C17000Y24) User Manual
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER Multi Programmer Ver.4.0 (S5U1C17000Y24) User Manual Rev.2.01 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
S1C17555/565/955/965
DESCRIPTIONS 16-bit Single Chip Microcontroller Built-in FSA (Flexible Signal processing Accelerator) function; It realize high processing with low power 12-bit A/D converter Several kinds of serial interface
HD74HC174. Hex D-type Flip-Flops (with Clear) ADE (Z) 1st. Edition Sep Description. Features. Function Table
Hex D-type Flip-Flops (with Clear) ADE-205-460 (Z) 1st. Edition Sep. 2000 Description This device contains 6 master-slave flip-flops with a common clock and common clear. Data on the D input having the
Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D01T1 Manual (Software Evaluation Tool for S1C31D01)
CMOS 16-BIT SINGLE CHIP MICROCONTROLLER S5U1C31D01T1 Manual (Software Evaluation Tool for S1C31D01) Rev.1.2 Evaluation board/kit and Development tool important notice 1. This evaluation board/kit or development
CMOS 16-BIT SINGLE CHIP MICROCOMPUTER. S5U1C17001H User Manual (ICD Mini Ver. 1.0)
CMOS 16-BIT SINGLE CHIP MICROCOMPUTER S5U1C17001H User Manual NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson.
RC90 Upgrade Procedures
RC90 Upgrade Procedures EM136R2547F Table of Contents Thank you for purchasing our robot system. Before using the robot system, please read this manual thoroughly and use the product properly. Keep this
CORAL P. MB86295-EB01 Rev CORAL P Evaluation Board. April Revision 1.3 Page Fujitsu Microelectronics Europe
CORAL P MB86295-EB01 Rev. 5.0 April 2004 CORAL P Evaluation Board 1.3 Revision 1.3 Page 1 Revision Control Revision Number Date Description of changes 0.1 9/8/02 Initial Release 0.9 6/12/02 Jumper list
S5U1C63005P Manual (Peripheral Circuit Board for S1C63256)
MF1035-02 CMOS 4-BIT SINGLE CHIP MICROCOMPUTER S5U1C63005P Manual (Peripheral Circuit Board for S1C63256) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without
HD74HC74. Dual D-type Flip-Flops (with Preset and Clear)
Dual D-type Flip-Flops (with Preset and Clear) ADE-205-421 (Z) 1st. Edition Sep. 2000 Description The flip-flop has independent data, preset, clear, and clock inputs and and outputs. The logic level present
YASKAWA AC Drive-J1000 Option. RS-232C Interface. Technical Manual Type SI-232/J, SI-232/JC RS-232C SI-232/J, SI-232/JC J1000
YASKAWA AC Drive-J1000 Option RS-232C Interface Technical Manual Type SI-232/J, SI-232/JC To properly use the product, read this manual thoroughly and retain for easy reference, inspection, and maintenance.
HD74HC00. Quad. 2-input NAND Gates. Features. Pin Arrangement
HD74HC00 Quad. 2-input NAND Gates Features High Speed Operation: t pd = 8.5 ns typ (C L = 50 pf) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: V CC = 2 to 6 V Low Input Current:
HD74HC09. Quad. 2-input AND Gates (with open drain outputs) Features. Pin Arrangement
HD74HC09 Quad. 2-input AND Gates (with open drain outputs) Features High Speed Operation: t pd = 8 ns typ (C L = 50 pf) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: V CC = 2 to
VCC_3.3V GND. USB Evaluation Cable (M-C30EV041) RTS CTS UART_RXD. Fig1. Block Diagram
Data Sheet Evaluation Cable Interface / Breakout Board for EPSON IMU OVERVIEW This Evaluation Cable Interface/Breakout Board is designed to convert the 1mm pitch connector of the Epson IMU to a.54mm pitch
HZ-P Series Silicon Epitaxial Planar Zener Diodes for Voltage Controller & Voltage Limitter
Silicon Epitaxial Planar Zener Diodes for Voltage Controller & Voltage Limitter ADE-208-123D (Z) Rev.4 Sep. 2000 Features Wide spectrum from 1.88V through 40V of zener voltage provide flexible application.
S2R72A54 Application Note
S2R72A54 Application Note Rev.1.02 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C88000H5 Manual. (S1C88 Family In-Circuit Emulator)
CMOS 8-BIT SINGLE CHIP MICROCOMPUTER S5U1C88000H5 Manual (S1C88 Family In-Circuit Emulator) NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written
2SK213, 2SK214, 2SK215, 2SK216
Silicon N-Channel MOS FET Application High frequency and low frequency power amplifier, high speed switching. Complementary pair with 2SJ76, J77, J78, J79 Features Suitable for direct mounting High forward
HD74HC of-8-line Data Selector/Multiplexer. Description. Features. Function Table
HD74HC151 1 of-8-line Data Selector/Multiplexer Description The HD74HC151 selects one of the 8 data sources, depending on the address presented on the A, B and C inputs. It features both true (Y) and complement
HD74HC bit Parallel-out Shift Register. ADE (Z) 1st. Edition Sep Description. Features. Function Table
8-bit Parallel-out Shift Register ADE-205-456 (Z) 1st. Edition Sep. 2000 Description This 8-bit shift register has gated serial inputs and clear. Each register bit is a D-type master/slave flipflop. Inputs
HD74HC273. Octal D-type Flip-Flops (with Clear) ADE (Z) 1st. Edition Sep Description. Features. Function Table
Octal -type Flip-Flops (with ) AE-205-482 (Z) 1st. Edition Sep. 2000 escription This device contains 8 master-slave flip-flops with a common clock and common clear. ata on the input having the specified
FUJITSU Component Thermal Printer FTP-63HMCL153 series
FUJITSU Component Thermal Printer FTP-63HMCL153 series Fujitsu 3 high speed thermal printer mechanism Overview The compact, low voltage FTP-63HMCL series provides an ultra low profie design and high speed
2SJ76, 2SJ77, 2SJ78, 2SJ79
Silicon P-Channel MOS FET November 1996 Application High frequency and low frequency power amplifier, high speed power switching Complementary pair with 2SK213, 2SK214, 2SK215, 2SK216 Features Suitable
2SK439. Silicon N-Channel MOS FET. Application. Outline. VHF amplifier SPAK. 1. Gate 2. Source 3. Drain
Silicon N-Channel MOS FET Application VHF amplifier Outline SPAK 1 2 3 1. Gate 2. Source 3. Drain Absolute Maximum Ratings (Ta = 25 C) Item Symbol Ratings Unit Drain to source voltage V DS 20 V Gate to
2SK1056, 2SK1057, 2SK1058
SK6, SK7, SK8 Silicon N-Channel MOS FET Application Low frequency power amplifier Complementary pair with SJ160, SJ161 and SJ16 Features Good frequency characteristic High speed switching Wide area of
S7R77024 PCB Design Guide
S7R77024 PCB Design Guide Rev.1.0 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT035BTFT-TS 3.5 (320(RGB) x 240 DOTS) TFT Module with Resistive Touch Screen November 25, 2015 Remark: Contents in this document are subject to change without notice.
FM4428 8KBits Memory Card Chip
FM4428 8KBits Memory Card Chip May. 2008 FM4428 8K Bits Memory card chip ver 2.1 1 INFORMATION IN THIS DOCUMENT IS INTENDED AS A REFERENCE TO ASSIST OUR CUSTOMERS IN THE SELECTION OF SHANGHAI FUDAN MICROELECTRONICS
APPLICATION NOTE. Atmel AT01080: XMEGA E Schematic Checklist. Atmel AVR XMEGA E. Features. Introduction
APPLICATION NOTE Atmel AT01080: XMEGA E Schematic Checklist Atmel AVR XMEGA E Features Power supplies Reset circuit Clocks and crystal oscillators PDI TWI Introduction This application note describes a
S5U1C63002P Manual (Peripheral Circuit Board for S1C63158/63358)
MF1017-02 CMOS 4-BIT SINGLE CHIP MICROCOMPUTER S5U1C63002P Manual (Peripheral Circuit Board for S1C63158/63358) NOTICE No part of this material may be reproduced or duplicated in any form or by any means
R2860D Digital Receiver OC-192/STM-64
R2860D Digital Receiver OC-192/STM-64 Description Features Linear output up to 0 dbm optical input power High sensitivity, < 18 dbm typical High overload, >2 dbm typical Transimpedance, 500 Ω typical dc-coupled
Application Note. Managing LVDS Interfaces
Application Note Managing LVDS Interfaces Todd Stonewall and Eric Bleak, Sharp Microelectronics of the Americas introduction The popularity of LVDS interfaces continues to grow, underlining its value in
2SK522. Silicon N-Channel Junction FET. Application. Outline. VHF amplifier, Mixer, local oscillator SPAK. 1. Gate 2. Source 3.
Silicon N-Channel Junction FET Application VHF amplifier, Mixer, local oscillator Outline SPAK 1 3 1. Gate. Source 3. Drain Absolute Maximum Ratings (Ta = C) Item Symbol Ratings Unit Gate to drain voltage
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER. FTP-62DMCL101#02/111#02, Easy Loading Method FTP-62DMCL101#02/111#02 OVERVIEW HIGHLIGHTS
BATTERY DRIVE, FTP-60D Series 2 HIGH SPEED THERMAL PRINTER, Easy Loading Method OVERVIEW The 2-inch (58mm), FTP-62DMCL series is an ultra compact, low voltage thermal printer mechanism with a removable
2SK2220, 2SK2221. Silicon N-Channel MOS FET. ADE (Z) 1st. Edition Mar Application. Features. Outline
SK, SK1 Silicon N-Channel MOS FET ADE--13 (Z) 1st. Edition Mar. 1 Application Low frequency power amplifier Complementary pair with SJ31, SJ3 Features High power gain Excellent frequency response High
FUJITSU Component Thermal Printer FTP-64GMCL153 series
FUJITSU Component Thermal Printer FTP-64GMCL153 series Fujitsu 4 high speed (200mm/s)thermal printer mechanism Overview The FTP-64GMCL series thermal printer driven by 24VDC provides high speed printing
Atmel ATMXT143E touchscreen controller Capacitive touch ITO 320 x 240 pixel LCD display with SPI interface LED backlight
APPLICATION NOTE Features Atmel AVR32936: mxt143e Xplained Hardware Users Guide Atmel maxtouch Touchscreen Controller 2.8 inch mxt143e LCD display module from Precision Design Associates (PDA) Atmel ATMXT143E
Amplifier for versatile fiber-optic links
Amplifier for Versatile Fiber-Optic Links Application Specification Author Document Number Revision 1 A.1 Amplifier for versatile fiber-optic links Suitable for extending the optical transmission distance
Silicon Planar Zener Diode for Low Noise Application. Part No. Cathode Band Package Name Package Code HZ-L Series Navy blue DO-35 GRZZ0002ZB-A 7 B 2
Silicon Planar Zener Diode for Low Noise Application REJ3G182-3 Rev.3. Nov.6.27 Features Diode noise level of this series is approximately 1/3-1/1 lower than the HZ series. Low leakage, low zener impedance
Atmel AVR473: ATAVRSB202 Hardware User Guide. 8-bit Atmel Microcontrollers. Application Note. Features. 1 Introduction
Atmel AVR473: ATAVRSB202 Hardware User Guide Features Atmel ATmega32HVB Smart Battery device evaluation and development kit High-side N-FETs 5mΩ sense resistor current measurements with 18-bit CC-ADC Input
PMEPS60. Getting Started Handbook Doc. Version 1.6. RISC II 2G Series Processor Module ELAN MICROELECTRONICS CORP.
PMEPS60 RISC II 2G Series Processor Module Getting Started Handbook Doc. Version 1.6 ELAN MICROELECTRONICS CORP. November 2008 i Trademark Acknowledgments: IBM is a registered trademark and PS/2 is a trademark
NHD MF 22 Controller Board
NHD 3.5 320240MF 22 Controller Board TFT Controller Evaluation Board NHD Newhaven Display 3.5 3.5 Diagonal 320240 320xRGBx240 pixels MF Model 22 22 POS FFC interface (8 bit data) SSD1963 Controller Newhaven
ICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
LAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01
LAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01 Contents PCB area reduction from typical module to discrete placement Typical module TDK discrete placement 17.53
S1R72U01 Technical Manual
S1R72U01 Technical Manual Rev. 1.00 NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right
S1D13704 TECHNICAL MANUAL
Embedded Memory Color LCD Controller TECHNICAL MANUAL Issue Date: 01/02/12 Document Number: X26A-Q-001-04 Copyright 2001 Epson Research and Development, Inc. All Rights Reserved. Information in this document
2SB727(K) Silicon PNP Epitaxial. Medium speed and power switching complementary pair with 2SD768(K) Base 2. Collector (Flange) 3.
Silicon PNP Epitaxial ADE-208-857 (Z) 1st. Edition Sep. 2000 Application Medium speed and power switching complementary pair with 2SD768(K) Outline TO-220AB 2 1 1 2 1. Base 2. Collector (Flange). Emitter
8-megabyte, 4-megabyte, and 2-megabyte 2.7-volt Only DataFlash Cards AT45DCB008D AT45DCB004D AT45DCB002D. Not Recommended for New Design
Features MultiMediaCard (MMC) Form Factor Single 2.7V to 3.6V Supply 66 MHz Max Clock Frequency Serial Peripheral Interface (SPI) Compatible Low Power Dissipation 10 ma Active Read Current Typical 25 µa