Real-Time Systems Hermann Härtig Real-Time Operating Systems Brief Overview

Size: px

Start display at page:

Download "Real-Time Systems Hermann Härtig Real-Time Operating Systems Brief Overview"

Ezra Hubbard
6 years ago
Views:

1 Real-Time Systems Hermann Härtig Real-Time Operating Systems Brief Overview 02/02/12

2 Outline Introduction Basic variants of RTOSes Real-Time paradigms Common requirements for all RTOSes High level resources Non-Real-Time on RTOS Scheduling Memory management Examples POSIX and Real-Time Michael Roitzsch WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 2

3 Basic variants of RTOSes (simplest) Cyclic executive Only one task as infinite loop Time driven, polling for external events Set of interrupt handlers Event driven Handlers usually have priorities Stacked execution, remember stack-based priority ceiling protocol WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 3

4 Basic variants of RTOSes (II) Thread packages (irmx, FreeRTOS, ecos,... ) Use a form of scheduling Preemptive or cooperative Priorities Provide synchronization primitives (e.g., semaphores) Some with priority inheritance/ceiling No address-space protection, no virtual memory WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 4

5 Basic variants of RTOSes (III) Microkernels (QNX, VxWorks, L4/Fiasco...) Memory protection (address spaces) With or without virtual memory More robustness (fault isolation) Extensive functionality provided by services atop WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 5

6 Basic variants of RTOSes (IV) Monolithic RTOS (LynxOS, MontaVista Linux..., preemption-patch Linux) Monolithic kernel with RT API (POSIX RT...) Often non-real-time APIs as well (e.g., Linux compatibility) Device drivers etc. usually run in privileged mode Real-time applications usually run in user mode Monolithic with RT executive underneath (RTLinux, RTAI, XtratuM...) Combination of a legacy OS with some form of an RT thread package (usually no memory protection) Real-time applications run in kernel mode WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 6

7 Basic variants of RTOSes (V) Partitioned system (time driven) All resources are statically allocated to the partitions (CPU, Memory, Devices...) Space and time isolation Multiple threads/processes in a partition Scheduling: Partitions: time driven (see slide 7) Threads/processes: any local scheduling scheme possible Arinc standard for avionics WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 7

8 Common requirement for RT Time as First Class Citizen Periodic processes or absolute timeouts Interface: clock_gettime, clock_getres High clock resolution necessary Special CPU event counters Non-periodic timers (dynamic ticks in Linux) Time synchronization WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 8

9 High level resources RT is often reduced to CPU scheduling and latencies. There are more resources to give guarantees about: Disk, Video, Network... Operating systems addressing these are Linux/RK (resource kernel) DROPS... WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 9

10 Non-Real-Time on RTOS Non-RT API on RT kernel: Unix emulation on QNX Linux emulation on LynxOS Run Non-RT OS on RT kernel: Xtratum, Radisys (Windows-NT), RT-MACH, L4Linux on DROPS WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 10

11 Scheduling in Real-Time OSes Priorities Priority inversion and countermeasures Time budgets Interrupt / event latencies WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 11

12 Real-Time scheduling (I) Fixed priorities Sufficient priority levels (e.g., RMS 256 prios [1]) Events/messages with priorities Higher priority events arrive first On some systems priority is donated to the receiver Signals are queued (predictability) WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 12

13 Real-Time scheduling (II) Dynamic priorities Application based: set_priority(p) Good for mode changes Not suitable for EDF OS driven EDF scheduling WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 13

14 Scheduling avoid priority inversion Priority ceiling Set priority of lock Critical sections as parameter for process creation Priority inheritance Borrowing of CPU time (priority) Non-preemptive critical sections WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 14

15 Scheduling budgets What if processes abuse their priorities? Overload situations? Periodic threads and time quanta Scheduling Assign budgets per period to threads: thread -> (period, priority, budget) Control overuse of budgets Periodic threads as first class object (fiasco) Watchdog timers to signal budget overruns WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 15

16 Interrupt latencies One key property of RTOSes: Predictable and low interrupt latency Interrupt latency reduction: No interrupt blocking for synchronization (preemptivity) Short interrupt service routines ( top halves ) Schedule more complex interrupt handling in a thread like fashion Partition data and instruction caches... WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 16

17 Real-Time and memory management Avoid demand paging/swaping (disk access is orders of magnitude slower than main memory) However: Address space isolation useful for robustness/debugging Some scenarios need paging Interface mlock(...) lock pages in memory (prevent swaping) munlock(...) allow demand paging again WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 17

18 Real-Time and memory management Static memory allocation Always good for real time Inflexible Dynamic memory management Use real-time capable memory allocator (e.g., [3] TLSF) WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 18

19 POSIX and Real-Time POSIX (Portable OS Interface): IEEE REALTIME extensions semaphores process memory locking priority scheduling realtime signal extension clocks/timers interprocess communication synchronized I/O asynchronous I/O WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 19

20 POSIX: memory locking Memory ranges can be locked (excluded from swaping) Provide latency guarantees for memory accesses WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 20

21 POSIX: Real-Time Scheduling Multiple scheduling policies SCHED_FIFO (non-preemptive FIFO) SCHED_RR (preemptive/time-sliced FIFO) SCHED_SPORADIC (2 prio levels, replenishment interval, and budget, FIFO on active priority level) SCHED_OTHER (threads without RT policy) At least 32 RT priorities WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 21

22 POSIX: Real-Time Signals Difference to non-realtime signals: Queued (also for the same signal number) Carry user data Ordered delivery Specific properties RT signals are in the range SIGRTMIN to SIGRTMAX Handler gets siginfo_t with additional data Lowest pending signal (number) is delivered first WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 22

23 Long I/O operations Use asynchronous I/O Example: POSIX (IEEE Std ) Initiate I/O aio_read(struct aiocb *aiocbp) aio_write(struct aiocb *aiocbp) POSIX signals for completion aio_suspend(...) to wait for completion WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 23

24 Long I/O operations (II) struct aiocbp { Int aio_filedes; /* file descriptor */ off_t aio_offset; /* absolute file offset */ Void *aio_buf; /* pointer to memory buffer */ size_t aio_nbytes; /* number of bytes to I/O */ Int aio_reqprio; /* prio of request */ struct sigevent aio_sigevent; /* signal */ Int aio_lio_opcode; /* opcode for lio_listio */ }; WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 24

25 POSIX: Real-Time timers/clocks (I) Clocks Min. resolution of 20ms (clock_getres()) Multiple clocks CLOCK_REALTIME (wall clock time) CLOCK_MONOTONIC (system-wide monotonic clock) CLOCK_PROCESS_CPUTIME_ID CLOCK_THREAD_CPUTIME_ID WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 25

26 POSIX: Real-Time timers/clocks (II) Timers Associated to a specific clock (see Clocks) Per process timers (generate RT signals) Periodic timers supported (struct timespec) WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 26

27 POSIX: execution time monitoring Clocks measuring thread/process execution time CLOCK_PROCESS_CPUTIME_ID CLOCK_THREAD_CPUTIME_ID Timers connected to these clocks Signal deadline misses WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 27

28 ARINC standard for avionics Statically partitioned system (time-driven scheduling) t n t n+1 t n+2 time Execution in one partition must not influence execution in another partition (strict isolation) Strictly time-driven scheduling of partitions No transfer of idle CPU time among partitions Additionally defines System health monitoring Intra/inter-partition communication Time management WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 28

29 Real-Time paradigms (I) Time driven Static partitioning in time slots Scheduler dispatches time slots in a fixed fashion (e.g., fixed cyclic scheduler) Event driven Events: messages, signals, interrupts... Priorities WS 2011/12 Real-Time Systems, Real-Time Operating Systems / Hermann Härtig 29

Real-Time Systems. Real-Time Operating Systems

Real-Time Systems. Real-Time Operating Systems Real-Time Systems Real-Time Operating Systems Hermann Härtig WS 2018/19 Outline Introduction Basic variants of RTOSes Real-Time paradigms Common requirements for all RTOSes High level resources Non-Real-Time