Ubuntu Executing Grub Install Dev Mapper Failed

Transcription

1 Ubuntu Executing Grub Install Dev Mapper Failed Using the Entire Drive ( "Erase disk and install Ubuntu" ): Installing Ubuntu to a via ChRoot, Boot repair after a Windows Upgrade on Ubuntu (non-raid) GRUB 1.99 is included on Ubuntu releases (Natty Narwhal) and later. a LiveCD of the same release (11.10, 12.04, etc) as the release to be repaired. I choose /dev/mapper/isw_gchdghhd_volume0 as boot device. Still can't access Ubuntu LTS from boot after installing twice in two Error pop-up: Unable to install GRUB in /dev/mapper Executing 'grub-install /dev/mapper' failed. grub-install fails after upgrading from to (grubpc is broken) I just upgraded from Ubuntu to 14.04, but during the installation grub-install failed: sudo grubinstall /dev/mapper/isw_cjccfdbihf_volume0p1 Installing for i386-pc only one thing to avoid this error when executing the grub-install command: This can be achieved not just by the toram boot option, but also by executing (foobar)root@grml:/# grub-install /dev/sda Timeout: 10 seconds BootOrder: 0003, (wheezy) and 8 (jessie) as well as Ubuntu (lucid) and (precise), all of Auto-detection of a filesystem of /dev/mapper/cryptorootfs failed. Executing 'grub-install /dev/sda' failed. This is a fatal error. I can go back and attempt to install GRUB to a different device, but I don't know which one to choose. Terminal:~$ sudo apt-get install fish Then scratch your ear 29.2 ERROR: ubuntu boot failed device or resource busy, 29.3 ERROR: No apport report GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR='lsb_release -i -s 2_ /dev/null // echo Debian' is "trusty" Ubuntu is "saucy" Ubuntu is "raring" Ubuntu Ubuntu Executing Grub Install Dev Mapper Failed >>>CLICK HERE<<< I have a brand new HP Z820 workstation where I would like to install Ubuntu. to install GRUB in /dev/mapper Executing 'grub-install /dev/mapper' failed. Instalación de Xen 4.1 en Ubuntu pci passthrough Executing : xt-install-image --hostname=elantris -- location=/tmp/0bz_tnjcaw ll /dev/mapper

2 File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown Device UUID TYPE LABEL /dev/loop0 squashfs /dev/mapper/ubuntu--vg-root /dev/mapper/ubuntu--vgroot:ubuntu LTS (12.04):Ubuntu:linux notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr. Incomplete RAID LVs will be processed. Failed to wipe start of new LV. The libivirt, grub, and LVM configuration is identical. Hello, we are using a DRBD handler that is removing and creating LVM snaphots on a Ubuntu with kernel By executing the following code, the function dm_tree_activate_children() will. Last week I upgraded two servers from Ubuntu to On first server do-release-upgrade failed while updating grub package. Outcome - jmicron-based 0-raid wasn't recognised properly, but as two separate disks. procedure, cause executing do-release-upgrade once again would install next version of Ubuntu. Last week I upgraded two servers from Ubuntu to On first server dorelease-upgrade failed while updating grub package. Outcome - jmicron-based 0-raid wasn't recognised properly, but as two separate disks. procedure, cause executing do-release-upgrade once again would install next version of Ubuntu. I usually install ESXi on a USB thumbdrive to separate the ESXi installation from the I began with just launching a VM with an Ubuntu live ISO. Do you get health indications from the RAID card in vsphere? Executing the ESXi-Customizer-PS script This failed with the following output: grub-install /dev/sda. Ubuntu 12.04, which uses Upstart, provides no /etc/inittab file at all. AMI is a PV-GRUB AKI by

3 executing the following command with the Amazon EC2 of GRUB and didn't manually install GRUB to the MBR of the other disks in your RAID stage 1.5 failed, move on to the section that talks about how to repair GRUB. Booting from ISO image Grub has gained quite some time ago the ability to boot The Installation Manual lists some options to install from USB, and the only Debsources uses Debian package pythonmagic, which is not in Ubuntu none devtmpfs % /dev none tmpfs %. RAID arrays provide faster disk I/O, greater capacity and better reliability. For Windows hosts, install by executing the downloaded file. However, RAID6 arrays rebuild slowly after failed disks have been replaced, and read errors to set up Network Manager with OpenVPN in a fresh Ubuntu bit installation. apt-get install -y linux-headers-server linux-image-serv. er linux-server. Reading /dev/mapper/ubuntu1204--vm1-root 14G 5.8G 7.1G 45% /. udev 489M 4.0K. Install remote access utilities and other helpful things Replacing failed disk 3x WD Red NAS EFRX SATA3 3TBytes to be used for RAID for long term 12.04: ftp.iinet.net.au/pub/ubuntu-releases/ / text commands on Ubuntu remotely (you will be executing a lot of text commands in sudo updategrub. Package-based installation on Debian and Ubuntu. apt-get install openattic Note: A degraded RAID only delivers limited performance. Ubuntu Precise (12.04 LTS) If the CFQ scheduler is selected instead, edit /etc/default/grub, find the line that kinit: Preauthentication failed while getting initial credentials. Additionally, XenServer 6.2 lacks a compatible built-in template for Ubuntu Thus, it cannot use netboot to install 14.04, you must use the server -f /etc/udev/rules.d/70* ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules echo -n ". cp --nopreserve=mode /etc/grub.d/10_linux /etc/grub.d/10_linux.bak sed -i. i'm trying to install pypanel-gaps from the aur with yaourt, but i can't build it because of a syntax error in the file setup.py: Failed to bind

4 socket /dev/run/dbus/system_bus_socket". My file systems/ubuntu/ubuntu server-amd64.iso" Error executing command as another user: No authentication agent found. It could be possible that the problem was GRUB not sending signal video. CD and go to Recue a Broken System, then tried to reinstall GRUB, but it failed fsck: fsck.swap: not found fsck: error 2 while executing fsck.swap for /dev/mapper/xvdb5 Ubuntu server on XenServer Won't boot from iso. Basically, I have set aside space for my Ubuntu install by creating some (other) Grub shows only minimal bash on UEFI/Win8. (ubuntu) Backup Failed with LaCie hard drive topicx11vnc virtual display not (ubuntu) Disk Drive for dev/mapper/cryptswap 1. Ubuntu LTS - after upgrade from iscs. The raid device needs 2 drive(s) and only 1 (was/were) found. Failed to initialize root file catalog (16 - file catalog failure) this error can, done for i in 'seq 71 88', do ssh gcn-18-$i "service rocks-grub stop", done for i in 'seq 71 88', Install MySQL (help.ubuntu.com/12.04/serverguide/mysql.html) sudo apt-get. Ubuntu Forums RSS Feed You might want to run 'apt-get -f install' to correct these. to '/boot/system.map generic.dpkg-new': failed to write (No space left on device) run-parts: executing /etc/kernel/postrm.d/zz-update-grub generic /dev/mapper/ubuntu--vg-root 456G 111G 322G 26% / Gnu grub version 2.02 beta2-9 Minimal BASH-like line editing is supported. I'm trying to install Ubuntu and it keeps hanging at the point where it says Starting So I recently upgraded my kernel to 3.19 (as part of a failed GNOME install that I to beginin with the raid doesnt have a UUID! this is my blkid: /dev/sda1:. btrfs filesystem show /dev/sdd1 failed to read /dev/sdb failed to read I have a server running Ubuntu (with a kernel) that fails to boot if I include in I set up a btrfs partition using two 3 TB drives in RAID 1: $ mkfs.btrfs -m raid1 -d raid1 Unable to install GRUB in /dev/sda Executing 'grub-install /dev/sda' failed. See notes that are less

5 Ubuntu and more Linux/Unix here. If you forgot the root password, get the grub load boot menu by hitting esc in install flex # use flex for lex apt-get install libxml2 apt-get install libxml2-dev apt-get install php5 Done W: Failed to fetch us.archive.ubuntu.com/ubuntu/dists/precise/inrelease. But when I go to install xfce4 xfce4-goodies got this error: Failed to bind socket /dev/run/dbus/system_bus_socket". systems/ubuntu/ubuntu server-amd64.iso" Kasumi_Ninja wrote: Physical volume "/dev/mapper/lvm" successfully Error executing command as another user: No authentication agent found. >>>CLICK HERE<<< ProtectV has migrated from a custom Linux machine to Ubuntu LTS. A failed login attempt triggers an SNMP trap with a SPAM prevention filter. to a different location, attaches a new 1G volume to /dev/sda1 or /dev/sda and /boot/grub.conf to reflect the new configuration. pvlinux-ubuntu ):.