3.5G AT Commands Manual v1.0

Transcription

1 3.5G AT s Manual v1.0 History Company was established on 15th of April Main residence is based in Vilnius. Company started with production of telecommunication devices. In 2001 company expanded its fields of activity by starting design and manufacturing of electronical systems for wireless data transfer. In 2002 contract of partnership and collaboration was signed with company Pro-Sign GmbH (Germany), considering design and representation of graphic programming interface icon-l in Eastern Europe. In 2003 Teltonika and NOKIA became partners and started integration of NOKIA M2M technology using NOKIA N12 module. It was the beginning of wireless technology development process. In 2004, NOKIA invited Teltonika to join presentation of M2M technology innovations in CeBIT It was very high evaluation of a small Lithuanian company and its possibilities, which helped to feel peculiarities of international business. In 2004 Teltonika produced more than 10 new products and solutions using EDGE technology. It was a condition that made Teltonika a leader of M2M integration solutions using EDGE not only in Lithuania, but also in Europe was the year of two successful international exhibitions: CEBIT 2005 and HANNOVER MESSE These shows opened new possibilities for offering our products and solutions for all world. In the year 2005 Teltonika became an international company. We became Lithuanian - Finnish Company. A few employees from NOKIA joined Teltonika s staff. Presently they successfully develop activity of new companies: Teltonika International GmbH (Düsseldorf) and Teltonika International Oy (Helsinki). About US Our vision is to provide added value for people and companies by creating electronical devices and solutions, which are based on the latest achievements of science and technology. We aim to help people to integrate the latest technologies in real life, what would bring more cosiness, comfort, freedom of mobility and security to their everyday life. We seek to make all our solutions an inconceivable part of people lives.

2 TABLE OF CONTENTS 1. DTE/DCE INTERFACE COMMANDS GENERAL COMMANDS UMTS GENERAL COMMANDS ABOUT ITU-T V.25TER GENERIC DCE CONTROL COMMANDS PCCA STD-101 COMMANDS CALL CONTROL COMMANDS UMTS CALL CONTROL COMMANDS ITU-T V.25TER CALL CONTROL COMMANDS ITU-T V.25TER DATA COMPRESSION COMMANDS FAX COMMANDS FAX ITU-T T.31 COMMANDS FOR GSM MOBILE EQUIPMENT COMMANSS MOBILE EQUIPMENT COMMANDS UMTS PACKET DOMAIN COMMANDS UMTS-SPECIFIC PACKET DOMAIN COMMANDS PACKET DOMAIN MODEM CAPABILITY COMMANDS SMS COMMANDS SMS TEXT AND PDU MODE COMMANDS NETWORK SERVICE COMMANDS NETWORK SERVICE RELATED COMMANDS SYNCHRONOUS DATA MODE COMMANDS ITU-T V.80TER SYNCHRONOUS DATA MODE COMMANDS

3 1. DTE/DCE INTERFACE COMMANDS ATE ATQ ATS3 ATS4 ATS5 ATV ATX AT&C AT&D AT+IPR AT+IFC AT+ICF echo Result code suppression line termination character Response formatting character line editing character DCE response format Result code selection and call progress monitoring control Circuit 109 DCE RLSD (DCD) behavior Circuit 108 DTE DTR behavior Fixed DTE rate Data Terminal Equipment (DTE)-DCE local flow control DTE-DCE character framing 2. GENERAL COMMANDS 2.1. UMTS GENERAL COMMANDS AT+CGMI Report manufacturer identification AT+CGMM Request model identification AT+CGMR Request revision identification AT+CGSN Request product serial number identification AT+CSCS Select TE character set AT+CIMI Request International Mobile Subscriber Identity 2.2. ABOUT ITU-T V.25TER GENERIC DCE CONTROL COMMANDS ATZ AT&F ATI AT+GMI AT+GMM AT+GMR AT+GSN AT+GCAP Reset to default configuration Set to factory defined configuration Request identification information Request manufacturer identification Request model identification Request revision identification Request product serial number identification Request complete capabilities list 3

4 2.3. PCCA STD-101 COMMANDS AT+WS46 Select wireless network 2.4. CONFIGURATION COMMAND ATS0 ATS2 ATS3 ATS4 ATS5 ATS6 ATS7 ATS8 ATS10 Set number of rings Set escape sequence character Set command line termination character Set response formatting character Set command line editing character Set pause before blind dialing Set number of seconds to wait for connection Completion Set number of seconds to wait in presence of comma dial modifier Set disconnect delay after indicating the absence of data carrier 3. CALL CONTROL COMMANDS 3.1. UMTS CALL CONTROL COMMANDS AT+CSTA Select type of address; AT+CBST Selects the circuit-switched bearer service AT+CR Service reporting control AT+CRC Cellular result codes AT+CRLP Alters the RLP parameters used when nontransparent circuit-switched data calls are originated ATD Dial AT+CHUP Hang up voice call AT+CHSN HSCSD nontransparent call configuration AT +CMOD Select Call mode AT +CVHU Voice hang-up control AT+CDIP Calling number ID presentation AT+CLIR Calling line identification restriction 4

5 3.2. ITU-T V.25TER CALL CONTROL COMMANDS ATD ATT ATP ATA ATH ATO ATS0 ATS6 ATS7 ATS8 ATS10 ATL ATM Dial Select tone dialing Select pulse dialing Answer incoming call Hook control command to terminate call in progress Does not terminate voice calls Return to online data state from online command state Enable/disable automatic answering Pause before blind dialing Number of seconds to establish end-toend data connection Number of seconds to pause when, is encountered in dial string Number of tenths of a second from carrier loss to disconnect Monitor speaker loudness Monitor speaker mode 3.3. ITU-T V.25ter data compression commands AT+DR AT+DS Report use of V.42bis using intermediate result code before going to online data state after call answer or origination Controls V.42bis data compression 4. FAX COMMANDS 4.1. FAX ITU-T T.31 COMMANDS FOR GSM AT+FCLASS Set the Service Class of a facsimile DCE AT+FTS Transmit silence AT+FRS Receive silence AT+FTM Transmit message AT+FRM Receive message AT+FTH Transmit HDLC AT+FRH Receive HDLC AT+FAR Adaptive Rate Control AT+FDD Double Escape Character Replacement AT+FCL Carrier Loss Timeout AT+FIT DTE Inactivity Timeout 5

6 5. MOBILE EQUIPMENT COMMANSS 5.1. MOBILE EQUIPMENT COMMANDS AT+CPBS Select phonebook memory storage AT+CPBR Read phonebook entries AT+CPBF Find phonebook entries AT+CPBW Write phonebook entry AT+CMEE Report mobile equipment error AT+CPAS Report phone activity status AT+CFUN Sets the level of functionality in the ME AT+CSQ Report signal quality AT+CBC Report battery charge AT+CPIN Enter PIN AT+CSIM Generic SIM access AT+CTZR Time zone reporting AT+CMEC Mobile equipment control code AT+CKPD Keypad control AT+CRSM Restricted SIM access AT+CIND Manipulate indicators AT+CMER Mobile equipment event reporting AT+CCLK Clock AT+CLVL Loudspeaker volume level AT+CMUT Mute control AT+CTZU Automatic time zone update AT+CLAC List all available AT commands AT+CEER Extended error reporting AT+CGDATA Enter data state 6

7 6. UMTS PACKET DOMAIN COMMANDS 6.1. UMTS-specific packet domain commands AT+CGQREQ AT+CGQMIN AT+CGEQREQ AT+CGEQMIN AT+CGATT AT+CGACT AT+CGSMS AT+CGEREP AT+CGCLASS AT+CGDCONT Set the QoS Profile that is used in Activate PDP Context Request Message Set minimum acceptable profile against the negotiated profile in Activate PDP Context Accept message Set the UMTS QoS Profile that is used in Activate PDP Context Request message Set the UMTS QoS Profile that is used in Activate PDP Context Request Message Attach or detach from the Packet Domain service Activate or deactivate the specified PDP context(s) Service Preference that will be used to send mobileoriginated SMS messages Control sending of unsolicited result codes Set the GPRS mobile class Set PDP context parameter values for a PDP context identified by connection identifier AT+CGDSCONT Define Secondary PDP Context AT+CGTFT AT+CGREG AT+CGPADDR AT+ CGCMOD Traffic Flow Template Presentation of unsolicited GPRS network registration status Show PDP address R99 PDP context modify 6.2. PACKET DOMAIN MODEM CAPABILITY COMMANDS ATD Dial (request Packet Domain Service or Packet Domain IP Service) 7

8 7. SMS COMMANDS 7.1. SMS TEXT AND PDU MODE COMMANDS AT+CSMS Select message service AT+CPMS Preferred message storage AT+CMGF Message format AT+CSCA Service center address AT+CSMP Set text mode parameters AT+CSDH Show text mode parameters AT+CNMI New message indications to TE AT+CMGL List message AT+CMGR Read message AT+CMGS Send message AT+CMSS Send message from storage AT+CMGW Write message to memory AT+CMGD Delete message AT+CNMA Acknowledge new message AT+CMGC Send command AT+CSCB Selects which types of CBMs are to be received by the ME AT+CMMS More Messages to Send AT+CSAS Save SMS Settings AT+CRES Restore SMS settings 8

9 8. NETWORK SERVICE COMMANDS 8.1. NETWORK SERVICE RELATED COMMANDS AT+CREG Presentation of unsolicited network registration status AT+CLCK Lock, unlock, or interrogate an ME or a network facility AT+CPWD Set new password for a facility lock function AT+CCUG Controls closed user group supplementary service AT+CCWA Control of Call Waiting Supplementary Services input values per spec Unsolicited result code <class>: Only 1 or 2 reported Unsolicited result code optional AT+CCFC AT+CUSD AT+CHLD AT+COPS AT+CPOL AT+CSSN AT+CAOC AT+CLIP AT+CACM Controls call forwarding supplementary service Controls unstructured supplementary service data Call related supplementary services Operator selection Preferred operator list Supplementary service notifications Advice of charge Calling line identification presentation Accumulated call meter AT+CAMM Accumulated call meter maximum AT+CPUC AT+CNUM AT+CLCC AT+COPN AT+COLP AT+CPLS Price per unit and currency table Subscriber number List current calls Read operator names Connected line identification presentation Selection of Preferred PLMN list 9. SYNCHRONOUS DATA MODE COMMANDS 9.1. ITU-T V.80TER SYNCHRONOUS DATA MODE COMMANDS AT+ES AT+ESA Enables the Synchronous Mode Preferred message storage 9